summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* mx51evk: Allow booting a zImage kernelFabio Estevam2012-10-26-1/+1
| | | | | | Allow booting a zImage kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx25pdk: Allow booting a zImage kernelFabio Estevam2012-10-26-0/+1
| | | | | | Allow booting a zImage kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx53loco: Allow booting a zImage kernelFabio Estevam2012-10-26-0/+1
| | | | | | Allow booting a zImage kernel. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx25pdk: Add Ethernet supportFabio Estevam2012-10-26-0/+22
| | | | | | | | | | | mx25pdk has a Ethernet port that is connected to its internal FEC controller. In order to power up the Ethernet PHY (DP83640) it is necessary to communicate with the MC34704 PMIC via I2C. Make the FEC ethernet port functional Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* pmic: Add support for mc34704Fabio Estevam2012-10-26-0/+49
| | | | | | Add the register layout for the MC34704 PMIC from Freescale. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* pmic_fsl: Introduce FSL_PMIC_I2C_LENGTHFabio Estevam2012-10-26-0/+2
| | | | | | | | | | | | | Introduce FSL_PMIC_I2C_LENGTH to configure the number of bytes that are used to communicate with the PMIC via I2C. Instead of hardcoding the value, pass the number via a configurable option per PMIC type. This will be useful for adding support for PMIC MC34704 from Freescale, which uses only one byte in its I2C protocol. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx25pdk: Add esdhc supportFabio Estevam2012-10-26-1/+15
| | | | | | | | mx25pdk has a SD/MMC slot connected to esdhc1. Add support for it and allow the environment variables to be saved into SD/MMC. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx25pdk: Include CONFIG_MX25Fabio Estevam2012-10-26-0/+1
| | | | | | | It is necessary to include CONFIG_MX25 as several i.mx drivers handle the SoC differences based on the this config option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* MX35: add support for woodburn boardStefano Babic2012-10-26-0/+407
| | | | | | | | | | | | | | | | | | | | | The woodburn board is based on the MX35 SOC. Support for both external (NOR) and internal (SD Card) boot mode are added. It uses the generic SPL framework to implement the internal boot mode. The following peripherals are supported: - Ethernet (FEC) - SD Card - NAND (512 MB) - NOR Flash In the internal boot mode, a simple imximage header is generated to set the address in internal RAM where the SOC must copy the SPL code. The initial setup is then demanded to the SPL itself. Signed-off-by: Stefano Babic <sbabic@denx.de>
* mx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFERFabio Estevam2012-10-20-2/+1
| | | | | | Data cache and CONFIG_MMC_BOUNCE_BUFFER can be safely enabled now. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFERFabio Estevam2012-10-20-2/+1
| | | | | | Data cache and CONFIG_MMC_BOUNCE_BUFFER can be safely enabled now. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx25pdk: Use internal RAM for stack pointerFabio Estevam2012-10-20-2/+9
| | | | | | Use internal RAM for stack pointer as it is done in other i.MX boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6qsabrelite: enable DCache and MMC bounce bufferDirk Behme2012-10-17-2/+1
| | | | | | | | | The recent U-Boot version 2012.07 has improved drivers (e.g. MMC and network/FEC) regarding DCache handling. So it should be safe to use the DCache on the i.MX6, now. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Stefano Babic <sbabic@denx.de>
* configs: mx53evk: Remove CONFIG_HAS_ETH1Fabio Estevam2012-10-17-1/+0
| | | | | | mx53evk has only one Ethernet port, so remove CONFIG_HAS_ETH1 option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* configs: mx51evk: Remove CONFIG_HAS_ETH1Fabio Estevam2012-10-17-1/+0
| | | | | | mx51evk has only one Ethernet port, so remove CONFIG_HAS_ETH1 option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* configs: mx53loco: Remove CONFIG_HAS_ETH1Fabio Estevam2012-10-17-1/+0
| | | | | | mx53loco has only one Ethernet port, so remove CONFIG_HAS_ETH1 option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx53loco: Adapt the IPU clockFabio Estevam2012-10-17-1/+1
| | | | | | | Since PLL2 now has changed, it is necessary to adapt the CONFIG_IPUV3_CLK accordingly. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* i.MX6: mx6qsabrelite: Add splash screen supportEric Nelson2012-10-16-1/+14
| | | | | | | | | | | | | | | | | | | | | Adds support for HDMI, two LVDS panels and one RGB panel to the SABRE-Lite board. Displays supported: HDMI - 1024 x 768 for maximum compatibility Hannstar-XGA - 1024 x 768 LVDS (Freescale part number MCIMX-LVDS1) wsvga-lvds - 1024 x 600 LVDS (Boundary p/n Nit6X_1024x600) wvga-rgb - 800 x 480 RGB (Boundary p/n Nit6X_800x480) Since the ipuv3_fb display driver currently supports only a single display, this code auto-detects panel by probing the HDMI Phy for Hot Plug Detect or the I2C touch controller of the LVDS and RGB displays in the priority listed above. Setting 'panel' environment variable to one of the names above will override auto-detection. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* i.MX video: struct fb_videomode can be constEric Nelson2012-10-16-1/+3
| | | | Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
* mx6qsabreauto: Change mmcroot so it works out of boxOtavio Salvador2012-10-16-2/+4
| | | | | | | | The mmcroot setting vary between mx6qsabreauto and mx6qsabresd so we move this to the board configuration file. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* mxc: Fix SDHC multi-instance clockBenoît Thébaudeau2012-10-16-0/+1
| | | | | | | | | | | | | | | | | | On mxc, each SDHC instance has a dedicated clock, so gd->sdhc_clk is not suitable for the multi-instance use case (initialization made directly with fsl_esdhc_initialize()). This patch fixes this issue by adding a configuration field for the SDHC input clock frequency. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Eric Bénard <eric@eukrea.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Jason Liu <r64343@freescale.com> Cc: Matt Sealey <matt@genesi-usa.com> Cc: Andy Fleming <afleming@gmail.com>
* Merge branch 'agust@denx.de-next' of git://git.denx.de/u-boot-stagingTom Rini2012-10-15-0/+85
|\
| * bootstage: Add new bootstage IDs for board, LCDSimon Glass2012-10-03-0/+5
| | | | | | | | | | | | Add bootstage IDs for board init and LCD. Signed-off-by: Simon Glass <sjg@chromium.org>
| * bootstage: Add feature to stash/unstash bootstage infoSimon Glass2012-10-03-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | It is useful to be able to write the bootstage information to memory for use by a later utility, or the Linux kernel. Provide a function to do this as well as a function to read bootstage information back and incorporate it into the current table. This also makes it possible for U-Boot to chain to another U-Boot and pass on its bootstage information. Signed-off-by: Simon Glass <sjg@chromium.org>
| * bootstage: Store boot timings in device treeSimon Glass2012-10-02-0/+7
| | | | | | | | | | | | | | | | Add an option, CONFIG_BOOTSTAGE_FDT to pass boot timings to the kernel in the device tree, if available. To use this, you must have CONFIG_OF_LIBFDT defined. Signed-off-by: Simon Glass <sjg@chromium.org>
| * bootstage: Add time accumulation featureSimon Glass2012-10-02-0/+27
| | | | | | | | | | | | | | | | | | | | | | Sometimes we want to add up the amount of time spent in a particular activity when it is happening in a number of discrete chunks. Add bootstage_start() to mark the start of an acitivity and bootstage_accum() to accumulate the time since the last start. Calling these function in pairs results in the accumulated time being collected. Signed-off-by: Simon Glass <sjg@chromium.org>
| * bootstage: Export bootstage_add_record() functionSimon Glass2012-10-02-0/+17
| | | | | | | | | | | | | | This function is not static, but not exported either. Add a prototype in the header file and move the required enum to the header also. Signed-off-by: Simon Glass <sjg@chromium.org>
* | configs: mx6qsabre_common.h: Use default clock definitionsFabio Estevam2012-10-15-2/+0
| | | | | | | | | | | | | | Since commit 50d4a707f0 (mx5/6: Define default SoC input clock frequencies) we can use the default clock values. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx31: Fix PDR0_CSI_PODFBenoît Thébaudeau2012-10-15-5/+5
| | | | | | | | | | | | | | | | | | | | The CSI PODF bit-field used by the previous code for the i.MX31 CCM PDR0 register is actually composed of two bit-fields: one pre-divider and one post-divider. This patch fixes the CCM access macros and the code using them accordingly. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
* | mx6qsabreauto: Use ttymxc3 as consoleOtavio Salvador2012-10-15-3/+7
| | | | | | | | | | | | | | | | The mx6qsabreauto console is different than mx6qsabresd so the console configuration is now set in the board file. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau2012-10-15-21/+0
| | | | | | | | | | | | | | | | | | | | | | Define default SoC input clock frequencies for i.MX5/6 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Jason Liu <r64343@freescale.com> Cc: Matt Sealey <matt@genesi-usa.com> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* | mx6q: Add basic support for mx6qsabreautoFabio Estevam2012-10-15-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | configs: mx6: Add a common config fileFabio Estevam2012-10-15-164/+185
| | | | | | | | | | | | Add a common mx6 config file that can be shared between some mx6 boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx6qsabresd: Add Ethernet supportFabio Estevam2012-10-15-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6qsabresd has a AR8031 Gigabit PHY. Add support for it. Also increase CONFIG_SYS_MALLOC_LEN so that FEC buffer allocation does not fail. Tested on 1Gbp and 100Mbps networks. Suggested-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* | mx6: Add basic support for mx6qsabresd board.Fabio Estevam2012-10-15-0/+170
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6qsabresd is a board based on mx6q SoC with the following features: - 1GB of DDR3 - 1 USB OTG port - 1 HDMI output port - SPI NOR - LVDS panel - Gigabit Ethernet - Camera Connector - eMMC and SD card slot - Audio Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | tegra: enable CONFIG_CMD_PARTStephen Warren2012-10-15-0/+11
| | | | | | | | | | | | | | | | This is extremely likely to be used from the boot.scr that Tegra's default bootcmd locates and executes. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Tegra20: Move some include files to arch-tegra for sharing with Tegra30Tom Warren2012-10-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | The move is pretty straight-forward. ap20.h and tegra20.h were renamed to ap.h and tegra.h. Some files remain in arch-tegra20 but 'include' a file in 'arch-tegra' with #defines & structs that will be common between T20 and T30 HW. HW-specific #defines, etc. stay in the 'arch-tegra20' 'root' file. All boards build OK w/MAKEALL -s tegra20. Checkpatch.pl runs clean. Seaboard works OK. Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Rename Medcom to Medcom-WideThierry Reding2012-10-15-4/+4
| | | | | | | | | | | | | | | | | | | | Medcom is the marketing name for an older, PXA-based version of the same device. In order to avoid confusion, rename the Tegra-based version to the new marketing name. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | input: Allow key ghosting filter to be disabledSimon Glass2012-10-15-1/+4
| | | | | | | | | | | | | | Some keyboards will not need a key ghosting filter, so make this feature optional. Signed-off-by: Simon Glass <sjg@chromium.org>
* | input: Separate out keyboard repeat/delay from initSimon Glass2012-10-15-4/+10
| | | | | | | | | | | | | | | | | | | | | | It is inconvenient to have to specify the keyboard repeat and delay at init time if it is not yet available, so move this into a separate function. Some drivers will want to do this when their keyboard init routine is actually called. Signed-off-by: Simon Glass <sjg@chromium.org>
* | sata.h: Make all sata/ata drivers include <sata.h>Pavel Herrmann2012-10-15-2/+5
| | | | | | | | | | | | | | | | | | | | - block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt not ulong. - We also move the extern of sata_dev_desc into <sata.h> - Remove now duplicate declarations from driver-specific headers. Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
* | ide.h: Make ide_(read|write) match block_dev_desc_t block_(read|write)Tom Rini2012-10-15-2/+2
| | | | | | | | | | | | | | block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt not ulong Signed-off-by: Tom Rini <trini@ti.com>
* | usb.h: Add udc_disconnect prototype to usb.hLukasz Dalek2012-10-15-0/+11
| | | | | | | | | | | | | | PXA25x gadget implements common function usb_disconnect(). This patch adds this function prototype into usb.h for boards using it. Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
* | usb: ulpi: add indicator configuration functionLucas Stach2012-10-15-2/+11
| | | | | | | | | | | | | | | | | | | | | | Allows for easy configuration of the VBUS indicator related ULPI config bits. Also move the external indicator setup from ulpi_set_vbus() to the new function. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | usb: lowlevel interface change to support multiple controllersLucas Stach2012-10-15-4/+8
| | | | | | | | | | | | | | | | | | | | | | Carry an index in the lowlevel usb functions to make specify the respective usb controller. Also pass through an controller struct from lowlevel_init to the creation of the root usb device of this controller. Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de>
* | ppc4xx: Remove AP1000 board supportStefan Roese2012-10-15-249/+2
| | | | | | | | | | | | | | | | | | As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: James MacAulay <james.macaulay@amirix.com> Acked-by: Marek Vasut <marex@denx.de>
* | ppc4xx: Remove ML2 board supportStefan Roese2012-10-15-257/+0
| | | | | | | | | | | | | | | | | | As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peter De Schrijver <p2@mind.be> Acked-by: Marek Vasut <marex@denx.de>
* | ppc4xx: Remove IOP480 supportStefan Roese2012-10-15-400/+1
| | | | | | | | | | | | | | | | | | | | Since the IOP480 (PPC401/3 variant from PLX) is only used on 2 boards that are not actively maintained, lets remove support for it completely. This way the ppc4xx code will get a bit cleaner. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Marek Vasut <marex@denx.de>
* | serial: Remove CONFIG_SERIAL_MULTI from remaining sourcesMarek Vasut2012-10-15-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | Remove the parts depending either on disabled CONFIG_SERIAL_MULTI or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI is now enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* | serial: Remove CONFIG_SERIAL_MULTI from config filesMarek Vasut2012-10-15-53/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove any notion of CONFIG_SERIAL_MULTI from board config files. Since CONFIG_SERIAL_MULTI is now enabled by default, it is useless to specify this config option in the board config files. Therefore remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
generated by cgit v1.1 at 2024-09-19 14:05:55 +0000