summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* xes: Make X-ES board names more genericPeter Tyser2010-10-22-11/+11
| | | | | | | | | | | | | | | | | Some U-Boot images for X-ES boards support multiple products in the same family. For example, the XPedite5370, XPedite5371, and XPedite5372 are similar enough that one U-Boot image can work on all 3 cards. To make it clear that a U-Boot image can work on boards of the same family, rename the boards with the least significant digit of 'x'. While we're at it, change the board config file and make targets to be lowercase. Also change the default uImage and fdt filenames to "board.uImage" and "board.dtb" to be more generic. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* xes: Add board_flash_wp_on()John Schmoller2010-10-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add board_flash_wp_on() to check a pca9557 gpio pin to see if non-volatile memory write protection is enabled. Previously, write protected NOR flashes would fail initialization which resulted in a bootup error such as: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB ## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB *** failed *** ### ERROR ### Please RESET the board ### With this patch, NOR flash initialization is skipped: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: Uninitialized - Write Protect On L2: 1024 KB enabled NAND: 1024 MiB ... Note that flash related commands such as flinfo and saveenv will error out when flash write protection is enabled. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* xes: Consolidate checkboard()John Schmoller2010-10-22-0/+4
| | | | | | | | | | | | | Create a common checkboard() function to support all X-ES's Freescale boards. Also, add a get_board_derivative() function which reads hardware strapping resistors to determine what model a board is. This allows one U-Boot image to support multiple boards. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* pci: Add ability to re-enumerate PCI busesJohn Schmoller2010-10-22-0/+3
| | | | | | | | | | | | | | Add a new 'pci enum' command which re-enumerates the PCI buses. This command is enabled via the CONFIG_CMD_PCI_ENUM define and can be useful in boards with FPGAs connected via PCI/PCIe, boards that support PCI hot-plugging, or during PCI debug. Also enable the 'pci enum' command for X-ES's Freescale-based boards. Signed-off-by: John Schmoller <jschmoller@xes-inc.com> Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Acked-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Wolfgang Denk <wd@denx.de>
* xes: Use common PCI initialization codePeter Tyser2010-10-22-15/+15
| | | | | | | | Common Freescale code for PCI initialization now exists, so migrate X-ES boards to use it. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* corenet_ds: Update CONFIG_SYS_GBL_DATA_SIZE to deal with growth in gd_tKumar Gala2010-10-22-1/+1
| | | | | | | The recent change the env code added an additional 32 bytes into gd_t and that causes to grow pass the previous CONFIG_SYS_GBL_DATA_SIZE size. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Fix building for 83xx boards with USB supportAnatolij Gustschin2010-10-21-1/+1
| | | | | | | | | | | | | Commit 29c6fbe0471afd7ffa41fcb2103eec5b53294897 broke building for 83xx boards with USB support: ehci-fsl.c: In function 'ehci_hcd_init': ehci-fsl.c:43: error: 'CONFIG_SYS_FSL_USB_ADDR' undeclared (first use in this function) ehci-fsl.c:43: error: (Each undeclared identifier is reported only once ehci-fsl.c:43: error: for each function it appears in.) make[1]: *** [ehci-fsl.o] Error 1 Signed-off-by: Anatolij Gustschin <agust@denx.de>
* MPC52xx, motionpro: update default configurationWolfgang Denk2010-10-20-43/+27
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2010-10-20-13/+13
|\
| * ppc4xx: Fix default environment for AMCC boardsStefan Roese2010-10-20-2/+2
| | | | | | | | | | | | | | | | | | | | Commit 0ad7f0950a9bc0a69b3cd5f34ccf7da25fcf1c6d [ppc4xx: cleanup default environment for AMCC boards] broke the default env for many PPC4xx boards. The '\0' character got removed at the end of some environment commands like "update". This patch adds the missing '\0' characters again. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Enable NOR flash support in sequoia_ramboot targetStefan Roese2010-10-20-11/+0
| | | | | | | | | | | | | | | | Until now, the Sequoia RAM-booting image disabled NOR flash support as this image was mainly created for NAND-only boards. This patch now enables NOR flash support for this RAM-booting version as well. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx/POST: Add board specific UART POST test to lwmon5Stefan Roese2010-10-20-0/+11
| | | | | | | | | | | | | | | | | | Add CONFIG_POST_UART to implement a board specific UART POST test. This is done since lwmon5 needs to set POST_ALWAYS to run this test on each reboot. And we don't want to change the default behavious of this this. Signed-off-by: Stefan Roese <sr@denx.de>
* | tqm85xx: Update PCI codePeter Tyser2010-10-20-10/+10
| | | | | | | | | | | | | | | | Update to use the recent, common FSL PCI initialization code. Signed-off-by: Peter Tyser <ptyser@xes-inc.com> CC: sr@denx.de Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Adding fixed sdram setting for cornet_ds boardYork Sun2010-10-20-59/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 800, 900, 1000, 1200MT/s data rate parameters are added for fixed sdram setting. SPD based parameters and fixed parameters can be toggled by hwconfig. To use fixed parameters, hwconfig=fsl_ddr:sdram=fixed To use SPD parameters, hwconfig=fsl_ddr:ctlr_intlv=cacheline,bank_intlv=cs0_cs1 Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Enable POST memory test for P2020DSYork Sun2010-10-20-2/+3
| | | | | | | | | | Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Enable POST memory test for corenet_dsYork Sun2010-10-20-0/+1
| | | | | | | | | | Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | Setup POST word for generic mpc85xxYork Sun2010-10-20-2/+2
|/ | | | | | | Using PIC TFRR register for post word load/store for generic MPC85xx. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-20-300/+1077
|\
| * update board EB+CPUx9K2Jens Scharsig2010-10-19-15/+8
| | | | | | | | | | | | | | * update to support arm reloaction * unnecessary environment variables removed Signed-off-by: Jens Scharsig <js_at_ng@scharsoft.de>
| * Build: PXA: Fix Vpac270 build variantsMarek Vasut2010-10-19-6/+6
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Fix vpac270 OneNAND booterMarek Vasut2010-10-19-1/+2
| | | | | | | | | | | | NOTE: The modification in Makefile will be superseded by a pending patch! Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Fix Balloon3 for RelocMarek Vasut2010-10-19-4/+6
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Fix ZipitZ2 for RelocMarek Vasut2010-10-19-4/+5
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Fix vpac270 for RelocMarek Vasut2010-10-19-3/+3
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Add necessary information for RELOCMarek Vasut2010-10-19-0/+60
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: fix environment sector size, kernel and environment location for vpac270Mikhail Kshevetskiy2010-10-19-8/+17
| | | | | | | | | | | | | | | | | | | | Define ENV_ADDR as MONITOR_BASE + MONITOR_LEN. Fix environment sector size (NOR: 32Kb for first four sectors and 128Kb for other; OneNAND: 128Kb). Last but not least: we have MONITOR_LEN = 0x40000 and one sector for environment (size = 0x20000), so the kernel may start from 0x00060000 only. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
| * PXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000Mikhail Kshevetskiy2010-10-19-2/+1
| | | | | | | | | | | | | | | | * CONFIG_SYS_CLKS_IN_HZ is not used anywhere, so removing it * CONFIG_SYS_HZ is set to 1000 on most architectures, so it seems to be the safe default Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
| * PXA: Balloon3 board supportMarek Vasut2010-10-19-0/+269
| | | | | | | | | | | | | | | | | | The following hardware is currently supported: - UART - USB Host - FPGA Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Voipac270 improvementsMarek Vasut2010-10-19-45/+61
| | | | | | | | | | | | | | | | | | | | 128MB NOR module support. Define __io to get harddrive working. Fix saving of environment into OneNAND. Boot from harddrive when possible. Add missing MAINTAINERS entry. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Add initial Palm LifeDrive supportMarek Vasut2010-10-19-0/+273
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: Palm Tungsten|C SupportMarek Vasut2010-10-19-0/+245
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Palm Tungsten|C PXA255 board. The support includes: - LCD - MMC - UART - NOR Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * PXA: pxa-regs.h cleanupMarek Vasut2010-10-19-2/+2
| | | | | | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
| * Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk2010-10-19-199/+87
| |\
| | * at91rm9200ek: enbable USB supportAndreas Bießmann2010-10-19-0/+15
| | | | | | | | | | | | | | | | | | | | | This patch enables USB for at91rm9200ek board. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| | * at91rm9200ek: convert to at91Andreas Bießmann2010-10-19-201/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes some functionality from at91rm9200ek board but the remaining functionality does now work with newer at91 code and arm-relocation. Currently missing features are: - dataflash booting (due to missing HW for testing) - MMC/SD-Card - first stage bootloader support is completely removed (not needed for NOR) Cause this board was (some days ago) reference for all at91rm9200 based boards this should be a good starting point to convert all remaining at91rm9200 borads to at91 code. Aside from that this is a good base to get some drivers between at91sam/at91rm/avr32 merged. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * | Merge branch 'elf_reloc'Wolfgang Denk2010-10-19-1/+6
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/include/asm/config.h board/LaCie/edminiv2/config.mk board/karo/tx25/config.mk board/logicpd/imx27lite/config.mk doc/README.arm-relocation Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * | arm926ejs, tx25: add support for ELF relocationsHeiko Schocher2010-10-13-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| | * | edminiv2: add support for ELF relocationsAlbert Aribaud2010-10-13-0/+5
| | | | | | | | | | | | | | | | Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-19-22/+25
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/logicpd/imx31_litekit/config.mk boards.cfg Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * | | QONG: fix and update board config fileWolfgang Denk2010-10-19-18/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix flash memory map and other updates for QONG board: - adjust/fix "kernel_addr" settings - adjust/fix mtdparts NOR flash settings - add mtdparts NAND flash mapping - sort command list - enable "setexpr" command - enable ext2 support - delete bogus comment Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * | | i.MX31: Fix Litekit board to use new ARM relocation support.Magnus Lilja2010-10-19-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Tested on hardware. Boots Linux nicely. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
| | * | | MX5: rename mx51 to mx5Jason Liu2010-10-18-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename mx51 to mx5 in order to support more mx51 like-style SOCs such as MX53 and the followings. Signed-off-by: Jason Liu <r64343@freescale.com>
| * | | | ARM: enable device tree for beagleJohn Rigby2010-10-18-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For testing ARM device tree support Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Wolfgang Denk <wd@denx.de>
| * | | | boot: change some arch ifdefs to feature ifdefsJohn Rigby2010-10-18-3/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The routines boot_ramdisk_high, boot_get_cmdline and boot_get_kbd are currently enabled by various combinations of CONFIG_M68K, CONFIG_POWERPC and CONFIG_SPARC. Use CONFIG_SYS_BOOT_<FEATURE> defines instead. CONFIG_SYS_BOOT_RAMDISK_HIGH CONFIG_SYS_BOOT_GET_CMDLINE CONFIG_SYS_BOOT_GET_KBD Define these as appropriate in arch/include/asm/config.h files. Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Wolfgang Denk <wd@denx.de>
| * | | | FDT: Add fixup support for multiple banks of memoryJohn Rigby2010-10-18-0/+1
| | |_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add fdt_fixup_memory_banks and reimplement fdt_fixup_memory using it. Tested on OMAP3 beagle board with two banks of memory. Signed-off-by: John Rigby <john.rigby@linaro.org> CC: Jerry Van Baren <vanbaren@cideas.com> Acked-by: Gerald Van Baren <vanbaren@cideas.com>
* | | | FPGA: Add missing prototypeStefano Babic2010-10-19-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add prototype function for ispVMFreeMem to remove warnings when support for Lattice FPGA is compiled. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | | | Add support for HP Jornada flashrom boardsKristoffer Ericson2010-10-19-0/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the HP Jornada flashboards that were made in 2008. Older flashroms should work if memory registers are adjusted. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Adpted for TEXT_BASE -> CONFIG_SYS_TEXT_BASE rename. Removed now redundant board/jornada/config.mk file. Removed unused empty jornada_init() function to silence "jornada.c:35: warning: 'jornada_init' defined but not used" Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | NC650/CP850: remove code for yet another corpseWolfgang Denk2010-10-19-451/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NC650 / CP850 boards have long been unmaintained and left broken. As obviously nobody is interested in that code any more, we may as well remove it. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | Rename TEXT_BASE: fix merge conflictsWolfgang Denk2010-10-18-2/+4
|/ / / | | | | | | | | | | | | | | | | | | | | | Commit 14d0a02a "Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE" missed a few places, especially for boards that were added inbetween. Fix the remaining issues. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | powerpc: Cleanup BOOTFLAG_* referencesPeter Tyser2010-10-18-2071/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that warm booting is not supported, there isn't a need for the BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them. Note that this change makes the board info bd_bootflags field useless. It will always be set to 0, but we leave it around so that we don't break the board info structure that some OSes are expecting to be passed from U-Boot. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
generated by cgit v1.1 at 2024-12-22 06:21:33 +0000