summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* ppc4xx: lwmon5: Update Lime initializationAnatolij Gustschin2007-07-26-3/+13
| | | | | | | | | Change Lime SDRAM initialization to now support 100MHz and 133MHz (if enabled). Also the framebuffer is initialized to display a blue rectangle with a white border. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: lwmon5: Support for 128 MByte NOR FLASH addedStefan Roese2007-07-24-4/+6
| | | | | | | The used Intel NOR FLASH chips have internally two dies, and are now treated as two seperate chips. Signed-off-by: Stefan Roese <sr@denx.de>
* POST: Add ECC POST for the lwmon5 boardPavel Kolesnikov2007-07-20-1/+8
| | | | | | | | | This patch adds ECC Post test for the Lwmon5 board based on PPC440EPx to U-Boot. Signed-off-by: Pavel Kolesnikov <concord@emcraft.com> Acked-by: Yuri Tikhonov <yur@emcraft.com> Acked-by: Stefan Roese <sr@denx.de>
* Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-07-16-6/+368
|\
| * make show_boot_progress () weak.Heiko Schocher2007-07-13-2/+6
| | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * Merge with /home/tur/git/u-boot#cm1_qp1Wolfgang Denk2007-07-12-0/+358
| |\
| | * CM1.QP1: Support for the Schindler CM1.QP1 board.Bartlomiej Sieka2007-07-11-0/+358
| | | | | | | | | | | | | | | Signed-off-by: Piotr Kruszynski <ppk@semihalf.com> Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
| * | [PCS440EP] - Show on the DIAG LEDs, if the SHA1 check failedHeiko Schocher2007-07-11-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | - now the Flash ST M29W040B is supported (not tested) - fix the "led" command - fix compile error, if BUILD_DIR is used Signed-off-by: Heiko Schocher <hs@denx.de>
* | | ppc4xx: AMCC Luan uses the new boardspecific DDR2 controller setupStefan Roese2007-07-16-1/+0
| | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | ppc4xx: Add remove_tlb() function to remove a mem area from TLB setupStefan Roese2007-07-16-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new function remove_tlb() can be used to remove the TLB's used to map a specific memory region. This is especially useful for the DDR(2) setup routines which configure the SDRAM area temporarily as a cached area (for speedup on auto-calibration and ECC generation) and later need this area uncached for normal usage. Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-07-11-3/+201
|\ \ \ | |/ /
| * | Coding style cleanup; update CHANGELOG.Wolfgang Denk2007-07-10-27/+27
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | Merge with /home/hs/Atronic/u-bootWolfgang Denk2007-07-09-3/+201
| |\ \ | | |/ | |/|
| | * [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANGHeiko Schocher2007-06-25-1/+0
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| | * [PCS440EP] upgrade the PCS440EP board:Heiko Schocher2007-06-22-3/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher <hs@denx.de>
* | | ppc4xx: Update lwmon5 default environmentStefan Roese2007-07-06-0/+2
| | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | ppc4xx: Update lwmon5 boardStefan Roese2007-07-06-0/+1
|/ / | | | | | | | | | | | | Add unlock=yes environment variable to default variables to unlock the CFI flash by default. Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk2007-07-06-6/+22
|\ \
| * | Merged POST framework with the current TOT.Sergei Poselenov2007-07-05-2/+4
| | | | | | | | | | | | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
| * | resubmit: ppc4xx: Remove sequoia/sequioa.h. Cleanup ppc440.h for PPC440EPXNiklaus Giger2007-07-04-2/+4
| | | | | | | | | | | | Signed-off-by: Niklaus Giger <niklaus.giger@nestal.com>
| * | ppc4xx: Update lwmon5 boardStefan Roese2007-07-04-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add optional ECC generation routine to preserve existing RAM values. This is needed for the Linux log-buffer support - Add optional DDR2 setup with CL=4 - GPIO50 not used anymore - Lime register setup added Signed-off-by: Stefan Roese <sr@denx.de>
* | | Code cleanup and default config update for STC GP3 SSA board.Wolfgang Denk2007-07-06-63/+63
|/ / | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge with /home/wd/git/u-boot/custodian/u-boot-testingWolfgang Denk2007-07-03-89/+267
|\ \
| * | Fix S-ATA support.Mushtaq Khan2007-06-30-8/+8
| | | | | | | | | | | | Signed-off-by: mushtaq khan <mushtaqk_921@yahoo.co.in>
| * | Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECxKim Phillips2007-05-17-89/+89
| | | | | | | | | | | | | | | | | | | | | For all practical u-boot purposes, TSECs don't differ throughout the mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | Merge with /home/git/u-bootWolfgang Denk2007-05-17-41/+1045
| |\ \
| * | | Minor coding style cleanup.Wolfgang Denk2007-05-15-5/+5
| | | |
| * | | Add driver for S-ATA-controller on Intel processors with Southmushtaq khan2007-05-15-0/+177
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bridge, ICH-5, ICH-6 and ICH-7. Implementation: 1. Code is divided in to two files. All functions, which are controller specific are kept in "drivers/ata_piix.c" file and functions, which are not controller specific, are kept in "common/cmd_sata.c" file. 2. Reading and Writing from the S-ATA drive is done using PIO method. 3. Driver can be configured for 48-bit addressing by defining macro CONFIG_LBA48, if this macro is not defined driver uses the 28-bit addressing. 4. S-ATA read function is hooked to the File system, commands like ext2ls and ext2load file can be used. This has been tested. 5. U-Boot command "SATA_init" is added, which initializes the S-ATA controller and identifies the S-ATA drives connected to it. 6. U-Boot command "sata" is added, which is used to read/write, print partition table and get info about the drives present. This I have implemented in same way as "ide" command is implemented in U-Boot. 7. This driver is for S-ATA in native mode. 8. This driver does not support the Native command queuing and Hot-plugging. Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
| * | | Fix for compile of JSE targetStephen Williams2007-05-15-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The attached patch fixes the compile of the JSE board in the denx git as of 14 may 2007. It is an extremely simple patch, it just adds the missing define of CFG_SYSTEMACE_WIDTH. Fix to compile JSE against 20070514 git of u-boot
* | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-06-25-124/+164
|\ \ \ \
| * | | | Coding stylke cleanup; rebuild CHANGELOGWolfgang Denk2007-06-22-98/+98
| | | | |
| * | | | Adapt log buffer code to support Linux 2.6Igor Lisitsin2007-06-22-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A new environment variable, "logversion", selects the log buffer behaviour. If it is not set or set to a value other than 2, then the old, Linux 2.4.4, behaviour is selected. Signed-off-by: Igor Lisitsin <igor@emcraft.com> --
| * | | | Extend POST support for PPC440Igor Lisitsin2007-06-22-25/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added memory, CPU, UART, I2C and SPR POST tests for PPC440. Signed-off-by: Igor Lisitsin <igor@emcraft.com> --
* | | | | ppc4xx: Add pci_pre_init() for 405 boardsStefan Roese2007-06-25-24/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the CFG_PCI_PRE_INIT option completely, since it's not needed anymore with the patch from Matthias Fuchs with the "weak" pci_pre_init() implementation. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | ppc4xx: Maintenance patch for esd's CPCI405 derivatsMatthias Fuchs2007-06-25-0/+21
|/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | -add pci_pre_init() for pci interrupt fixup code -disable phy sleep mode via reset_phy() function -use correct io accessors -cleanup Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
* | | | [ppc] Fix build breakage for all non-4xx PowerPC variants.Rafal Jaworowski2007-06-22-5/+14
| | | | | | | | | | | | | | | | | | | | - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros - minor 4xx cleanup
* | | | Coding style cleanup. Refresh CHANGELOG.Wolfgang Denk2007-06-20-27/+27
| | | |
* | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-06-20-5/+30
|\ \ \ \
| * | | | TQM5200: Add Flat Device Tree support, update default env. accordingly.Bartlomiej Sieka2007-06-08-3/+27
| | |_|/ | |/| | | | | | | | | | | | | | Signed-off-by: Jan Wrobel <wrr@semihalf.com> Acked-by: Bartlomiej Sieka <tur@semihalf.com>
| * | | Fix config problems on SC3 board; make ide_reset_timeout work.Wolfgang Denk2007-06-08-2/+3
| | | |
* | | | [ppc4xx] Fix problem with NAND booting on AMCC AcadiaStefan Roese2007-06-19-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest changes showed a problem with the location of the NAND-SPL image in the OCM and the init-data area (incl. cache). This patch fixes this problem. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | [ppc4xx] Change lwmon5 port to work with recent 440 exception reworkStefan Roese2007-06-15-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Now CONFIG_440 has to be defined in all PPC440 board config files. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | Merge with /home/stefan/git/u-boot/denx-440-exceptionsStefan Roese2007-06-15-63/+77
|\ \ \ \
| * | | | ppc4xx: Clean up 440 exceptions handlingGrzegorz Bernacki2007-06-15-63/+77
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Introduced dedicated switches for building 440 and 405 images required for 440-specific machine instructions like 'rfmci' etc. - Exception vectors moved to the proper location (_start moved away from the critical exception handler space, which it occupied) - CriticalInput now serviced (with default handler) - MachineCheck properly serviced (added a dedicated handler and return subroutine) - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, unhandled and those not relevant for 4xx were eliminated) - Eliminated Linux leftovers, removed dead code Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com> Signed-off-by: Rafal Jaworowski <raj@semihalf.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | [ppc4xx] Add initial lwmon5 board supportStefan Roese2007-06-15-1/+441
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds initial support for the Liebherr lwmon5 board euqipped with an AMCC 440EPx PowerPC. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | [ppc4xx] Extend 44x GPIO setup with default output stateStefan Roese2007-06-15-68/+70
|/ / / | | | | | | | | | | | | | | | | | | The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup is extended with the default GPIO output state (level). Signed-off-by: Stefan Roese <sr@denx.de>
* | | Coding Style cleanup; generate new CHANGELOG file.Wolfgang Denk2007-06-06-19/+18
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc86xxWolfgang Denk2007-06-06-1/+9
|\ \ \
| * \ \ Merge branch 'mpc8641'Jon Loeliger2007-06-05-1/+9
| |\ \ \
| | * | | mpc8641 image size cleanupEd Swarthout2007-06-05-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | e600 does not have a bootpg restriction. Move the version string to beginning of image at fff00000. Resetvec.S is not needed. Update flash copy instructions. Add tftpflash env variable Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
generated by cgit v1.1 at 2024-12-12 05:37:53 +0000