summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* Fix calculation of I2C clock for some 85xx chipsTimur Tabi2008-04-18-1/+3
| | | | | | | | | | | Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and some use CCB/3. There is no pattern that can be used to determine which chips use which frequency, so the only way to determine is to look up the actual SOC designation and use the right value for that SOC. Update immap_85xx.h to include the GUTS PORDEVSR2 register. Signed-off-by: Timur Tabi <timur@freescale.com>
* New i.MX31 SPI driverGuennadi Liakhovetski2008-04-18-2/+21
| | | | | | | | | This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far only implemented and tested on i.MX31, can with a modified register layout and definitions be used for i.MX27, I think, MXC CPUs have similar SPI controllers too. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-netWolfgang Denk2008-04-18-0/+2
|\
| * Clean up smsc911x driverGuennadi Liakhovetski2008-04-15-0/+2
| | | | | | | | | | | | | | | | | | Replace direct register address derefencing with accessor functions. Restrict explicitly 32-bit bus-width, extend affected configurations respectively. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Fix name of i.MX31 boards in config file headerMagnus Lilja2008-04-18-2/+2
| | | | | | | | | | | | Correct the name of the i.MX31 Litekit and phyCORE boards in config files. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
* | Clean up dataflash partitioningUlf Samuelsson2008-04-18-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the board dependent parts from "drivers/mtd/dataflash.c". Each board relying on this, will have the appropriate code in a new file, "partition.c" in the board directory. board Makefiles updated to use the file. The dataflash partitions are aligned on sector/page boundaries. The CONFIG_NEW_DF_PARTITION was used to create named partitions This is now the default operation, and the CONFIG variable is removed. Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
* | Get rid of redundant copy of renamed header file.Wolfgang Denk2008-04-18-23/+0
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Restore the ability to continue booting after legacy image overwriteMarian Balakowicz2008-04-17-1/+2
| | | | | | | | | | | | | | | | | | | | | | Before new uImage code was merged, bootm code allowed for the kernel image to get overwritten during decompresion. new uImage introduced a check for image overwrites and refused to boot the image that got overwritten. This patch restores the old behavior. It also adds a warning when the image overwriten is a multi-image file, because in such case accessing componentes other than the first one will fail. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* | mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTINGDetlev Zundel2008-04-17-53/+53
| | | | | | | | Signed-off-by: Detlev Zundel <dzu@denx.de>
* | mgcoge, mgsuv: rename 'addcon' to 'addcons'Detlev Zundel2008-04-17-4/+4
| | | | | | | | | | | | | | The latter name with 13 users is already established, so we will use that. Signed-off-by: Detlev Zundel <dzu@denx.de>
* | lwmon5: disable CONFIG_ZERO_BOOTDELAYSascha Laue2008-04-17-1/+0
| | | | | | | | Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>
* | Additional PCI IDs for IDE and network controllersGuennadi Liakhovetski2008-04-17-0/+5
| | | | | | | | | | | | These PCI IDs are required by the Linkstation platforms. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
* | Change env_get_char from a global function ptr to a function.Joakim Tjernlund2008-04-17-0/+1
|/ | | | | | This avoids an early global data reference. Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
* ata: update the libata.h from ata.h of linux kernelDave Liu2008-04-13-90/+554
| | | | | | | | Current libata.h of u-boot is out of sync from linux kernel, this patch make it be consistent with linux kernel. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Tor Krill <tor@excito.com>
* Add apollon board MAINTAINERS entryKyungmin Park2008-04-13-1/+2
| | | | Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* Support for LinkStation / KuroBox HD and HG PPC modelsGuennadi Liakhovetski2008-04-13-0/+507
| | | | | | | | | | | | | | | | | This patch is based on the port by Mihai Georgian (see linkstation.c for Copyright information) and implements support for LinkStation / KuroBox HD and HG PPC models from Buffalo Technology, whereby HD is deactivated at the moment, pending network driver fixing. Notice to users: this is pretty much a barebone port. Support for network on HG models is already in the U-Boot mainline, but you might also want patches to switch fan / phy modes depending on the negotiated ethernet parameters. This patch also doesn't support console switching, booting EM mode, Buffalo specific ext2 magic number. So, if you want to use any of those, you need additional patches. Otherwise this patche provides a fully functional u-boot with a network console on your system. Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* Add CONFIG_MII_INIT support to related boardsTsiChung Liew2008-04-13-3/+27
| | | | | | | | | Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in cmd_init.c. Add CONFIG_MII_INIT to board configuration files that use mii_init() in cmd_init.c. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com> Acked-by: Ben Warren <biggerbadderben@gmail.com>
* Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boardsTsiChung Liew2008-04-13-2/+17
| | | | | | | Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files. Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
* Introduce phys_size_t and move phys_addr_t into asm/types.hKumar Gala2008-04-13-22/+40
| | | | | | | Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's that have larger physical addresses like 44x, 85xx, and 86xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Rename include/md5.h to include/u-boot/md5.hAndy Fleming2008-04-13-0/+23
| | | | | | | | | | | | | | Some systems have md5.h installed in /usr/include/. This isn't the desired file (we want the one in include/md5.h). This will avoid the conflict. This fixes the host tools building problem by creating a new directory for U-Boot specific header files. [Patch by Andy Fleming, modified to use separate directory by Wolfgang Denk] Signed-off-by: Wolfgang Denk <wd@denx.de> Signed-off-by: Andy Fleming <afleming@freescale.com> Acked-by: Timur Tabi <timur@freescale.com>
* drivers: code clean upDave Liu2008-04-13-0/+5
| | | | Signed-off-by: Dave Liu <daveliu@freescale.com>
* Altera Stratix II supporteran liberty2008-04-13-4/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds Support for Altera's Stratix II. Within your board specific init file you will have to call 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off); 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc); Altera_desc* contines (for example): { Altera_StratixII, /* part type */ passive_serial, /* interface type */ 1, /* bytes of data part can accept */ (void *)(&funcs), /* interface function table */ 0L, /* base interface address */ 0 /* implementation specific cookie */ } funcs is the interface. It is of type altera_board_specific_func. It looks like this: altera_board_specific_func func = { pre_fn, config_fn, status_fn, done_fn, clk_fn, data_fn, abort_fn, post_fn, }; you will have to implement these functions, which is usually bit banging some gpio. Signed-off-by: Eran Liberty <liberty@extricom.com>
* Phytec Phycore-i.MX31 supportSascha Hauer2008-04-13-0/+180
| | | | | | | This patch adds support for the Phytec Phycore-i.MX31 board Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* mx31 litekit supportSascha Hauer2008-04-13-0/+163
| | | | | | | This patch adds support for the mx31 litekit board Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* core support for Freescale mx31Sascha Hauer2008-04-13-0/+169
| | | | | | | This patch adds the core support for Freescale mx31 Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* Separate omap24xx specific code from arm1136Sascha Hauer2008-04-13-0/+0
| | | | | | | | Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
* ppc: Get rid of unused machine type definitionsWolfgang Denk2008-04-13-69/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Coding Style cleanup; update CHANGELOGWolfgang Denk2008-04-13-167/+156
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-mpc83xxWolfgang Denk2008-04-13-2/+2
|\
| * mpc83xx: Fix the SATA clock setting of 837x targetsDave Liu2008-04-11-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently the SATA controller clock is configured as CSB clock, usually the CSB clock is 400/333/266MHz. However, The SATA IP block is only guaranteed to operate up to 200 MHz as stated in the HW spec. The bug is reported by Joe D'Abbraccio <ljd015@freescale.com> This patch makes the SATA clock as half of CSB clock. Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2008-04-13-26/+22
|\ \
| * | ppc4xx: Fix power mgt definitions for PPC440Eugene O'Brien2008-04-11-8/+1
| | | | | | | | | | | | | | | | | | Corrected DCR addresses of PPC440EP power management registers. Signed-off-by: Eugene O'Brien <eugene.obrien@advantechamt.com>
| * | ppc4xx: Update Kilauea defconfig to use device-tree booting as defaultStefan Roese2008-04-11-11/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch reworks the default environment on Kilauea/Haleakala. Now "net_nfs" for exmaple uses the device-tree style booting formerly know as "net_nfs_fdt". Also the addresses in RAM were changed because of the new image booting support, which check for image overwriting. So the addresses needed togeet adjusted. Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: Fix Canyonlands default environment to work with new image supportStefan Roese2008-04-09-7/+5
| | | | | | | | | | | | | | | | | | | | | Since the new image support checks for image overwriting, the default environment needs to get adjusted to use correct addresses. Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeWolfgang Denk2008-04-13-16/+63
|\ \ \
| * | | microblaze: xupv2p fix config file for supporting FDTMichal Simek2008-04-08-1/+5
| | | |
| * | | microblaze: ml401 fix config file for supporting FDTMichal Simek2008-04-08-5/+8
| | | | | | | | | | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: ml401 - add ifdef for GPIOMichal Simek2008-04-08-0/+2
| | | | | | | | | | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: clean uart16550 and uartlite handlingMichal Simek2008-04-08-4/+30
| | | | | | | | | | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
| * | | microblaze: ML401 and XUPV2P remove emac and emaclite referenceMichal Simek2008-04-08-6/+18
| |/ / | | | | | | | | | Signed-off-by: Michal Simek <monstr@monstr.eu>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-sparcWolfgang Denk2008-04-13-0/+4904
|\ \ \ | |_|/ |/| |
| * | SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 ↵Daniel Hellstrom2008-04-08-0/+349
| | | | | | | | | | | | | | | | | | targets. See www.gaisler.com for information. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
| * | SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is ↵Daniel Hellstrom2008-04-08-0/+380
| | | | | | | | | | | | | | | | | | exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
| * | SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II ↵Daniel Hellstrom2008-04-08-0/+356
| | | | | | | | | | | | | | | | | | Edition) with GRLIB template design. See www.gaisler.com for information. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
| * | SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. ↵Daniel Hellstrom2008-04-08-0/+340
| | | | | | | | | | | | | | | | | | See www.gaisler.com for information. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
| * | SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template ↵Daniel Hellstrom2008-04-08-0/+321
| | | | | | | | | | | | | | | | | | design. See www.gaisler.com for board information. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
| * | SPARC: Added support for SPARC LEON2 SOC Processor.Daniel Hellstrom2008-04-08-0/+276
| | | | | | | | | | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
| * | SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It ↵Daniel Hellstrom2008-04-08-0/+15
| | | | | | | | | | | | | | | | | | can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version. Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
| * | SPARC: Added support for SPARC LEON3 SOC processor.Daniel Hellstrom2008-04-08-1/+499
| | | | | | | | | | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
| * | SPARC: added SPARC support for new uimage in common code.Daniel Hellstrom2008-04-08-0/+4
| | | | | | | | | | | | Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
generated by cgit v1.1 at 2024-12-16 06:59:35 +0000