summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* * Fix minor NAND JFFS2 related issuewdenk2004-05-03-1/+1
| | | | | | | | | * Fixes for SL811 USB controller: - implement workaround for broken memory stick - improve error handling * Increase packet send timeout to 10 ms in cpu/mpc8xx/scc.c to better cope with congested networks.
* * Patch by Christian Hohnstaedt, 23 Apr 2004:wdenk2004-04-25-103/+133
| | | | | | | | | | | | | | | | | | | | | | JFFS2 speed enhancements: - repair header CRC calculation in jffs2_1pass.c - add eraseblock size to the partition information to skip empty eraseblocks if we find more then 4k of free space. - The JFFS2 scanner is now fast enough to remove the spinning wheel so #ifdef-ed out. - add watchdog calls in long running loops * Patch by Philippe Robin, 22 Apr 2004: Fix ethernet configuration for "versatile" board * Patch by Kshitij Gupta, 21 Apr 2004: Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards * Patch by Steven Scholz, 24 Feb 2004: Fix a bug in AT91RM9200 ethernet driver: The MII interface is now initialized before accessing the PHY. * Cleanup PCI ID's
* * Patch by John Kerl, 19 Apr 2004:wdenk2004-04-25-63/+545
| | | | | | | | | | | Use U-boot's miiphy.h for PHY register names, rather than introducing a new header file. * Update pci_ids.h from linux-2.4.26 * Patch by Masami Komiya, 19 Apr 2004: Fix problem cause by VLAN function on little endian architecture without VLAN environment
* Clean up the TQM8xx_YYMHz configurations; allow to use the samewdenk2004-04-24-356/+41
| | | | | | binary image for all clock frequencies. Implement run-time optimization of flash access timing based on the actual bus frequency.
* * Modify KUP4X board configuration to use SL811 driver for USB memorywdenk2004-04-23-36/+36
| | | | | | | | | | | | | | | sticks (including FAT / VFAT filesystem support) * Add SL811 Host Controller Interface driver for USB * Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README * Patch by Pantelis Antoniou, 19 Apr 2004: Allow to use shell style syntax (i. e. ${var} ) with standard parser. Minor patches for Intracom boards. * Patch by Christian Pell, 19 Apr 2004: cleanup support for CF/IDE on PCMCIA for PXA25X
* * Patch by John Kerl, 16 Apr 2004:wdenk2004-04-18-1/+1
| | | | | | | | | Enable ranges in mii command, e.g. mii read 0-1f 0 or mii read 4-7 18-1a. Also add mii dump subcommand for pretty-printing standard regs 0-5. * Patch by Stephen Williams, 16 April 2004: fix typo in JSE.h; update MAINTAINERS
* * Patch by Matthew S. McClintock, 14 Apr 2004:wdenk2004-04-18-2/+6
| | | | | | | | | | | | | fix initdram function for utx8245 board * Patch by Markus Pietrek, 14 Apr 2004: use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag * Patch by Reinhard Meyer, 18 Apr 2004: provide the IDE Reset Function for EMK 5200 boards * Patch by Masami Komiya, 12 Apr 2004: fix pci_hose_write_config_{byte,word}_via_dword problems
* * Patch by Sangmoon Kim, 12 Apr 2004:wdenk2004-04-18-1/+1
| | | | | | | | | | Update max RAM size for debris board * Patch by Travis Sawyer, 08 Apr 2004: Add TLB entry for second DIMM slot on ocotea * Patch by Masami Komiya, 08 Apr 2004: add RTL8169 network driver
* * Patch by Dan Malek, 07 Apr 2004:wdenk2004-04-18-1/+405
| | | | | | | | | | | | | | | | | - Add support for RPC/STx GP3, Motorola 8560 board - Update 85xx TSEC driver so it searches MII for first available PHY and uses that one. - Add functions to support console MII commands. * Patch by Tolunay Orkun, 07 Apr 2004: Move initialization of bi_iic_fast[] from board_init_f() to board_init_r() * Patch by Yasushi Shoji, 07 Apr 2004: Cleanup microblaze port * Patch by Sangmoon Kim, 07 Apr 2004: Add auto SDRAM module detection for Debris board
* * Add missing microblaze header fileswdenk2004-04-18-4/+565
| | | | | | * Patch by Rune Torgersen, 06 Apr 2004: - Fix some PCI problems on the MPC8266ADS board - Fix the location of some PCI entries in the immap structure
* * Patch by Yasushi Shoji, 07 Apr 2004:wdenk2004-04-18-2/+1349
| | | | | - add support for microblaze processors - add support for AtmarkTechno "suzaku" board
* * Configure PPChameleon board to use redundand environment in flashwdenk2004-04-18-5/+13
| | | | | | * Configure PPChameleon board to use JFFS2 NAND support. * Added support for JFFS2 filesystem (read-only) on top of NAND flash
* * Cleanup, minor fixeswdenk2004-04-18-15/+15
| | | | | | | | | * Patch by Rune Torgersen, 16 Apr 2004: LBA48 fixes * Patches by Pantelis Antoniou, 16 Apr 2004: - Fix some compile problems; add "once" functionality for the netretry variable
* Patches by Pantelis Antoniou, 16 Apr 2004:wdenk2004-04-18-11/+128
| | | | | | | | | | | | | | | | | - add support for a new version of an Intracom board and fix various other things on others. - add verify support to the crc32 command (define CONFIG_CRC32_VERIFY to enable it) - fix FEC driver for MPC8xx systems: 1. fix compilation problems for boards that use dynamic allocation of DPRAM 2. shut down FEC after network transfers - HUSH parser fixes: 1. A new test command was added. This is a simplified version of the one in the bourne shell. 2. A new exit command was added which terminates the current executing script. 3. Fixed handing of $? (exit code of last executed command)
* * Patch by George G. Davis, 02 Apr 2004:wdenk2004-04-15-0/+164
| | | | add support for Intel Assabet board
* * Patch by Stephen Williams, 01 Apr 2004:wdenk2004-04-15-0/+311
| | | | | | | Add support for Picture Elements JSE board * Patch by Christian Pell, 01 Apr 2004: Add CompactFlash support for PXA systems.
* Patches by Pantelis Antoniou, 30 Mar 2004:wdenk2004-04-15-4/+52
| | | | add networking support for VLANs (802.1q), and CDP (Cisco Discovery Protocol)
* Patches by Pantelis Antoniou, 30 Mar 2004:wdenk2004-04-15-1/+11
| | | | | | | | | | | | Improve and fix various things in the MPC8xx FEC driver: 1. The new 87x and 88x series of processors have two FECs, and the new driver supports them both. 2. Another change in the 87x/88x series is support for the RMII (Reduced MII) interface. However numerous changes are needed to make it work since the PHYs are connected to the same lines. That means that you have to address them correctly over the MII interface.
* * Patches by Pantelis Antoniou, 30 Mar 2004:wdenk2004-04-15-0/+43
| | | | | | | - add support for the Epson 156x series of graphical displays (These displays are serial and not suitable for using a normal framebuffer console on them) - add infrastructure needed in order to POST any DSPs in a board
* * Patches by Pantelis Antoniou, 30 Mar 2004:wdenk2004-04-15-54/+1563
| | | | | | | | | | - add auto-complete support to the U-Boot CLI - add support for NETTA and NETPHONE boards; fix NETVIA board * Patch by Yuli Barcohen, 28 Mar 2004: - Add support for MPC8272 family including MPC8247/8248/8271/8272 - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS) - Change configuration method for MPC8260ADS family
* Fix if / elif handling bug in HUSH shellwdenk2004-04-12-1/+1
|
* Release version 1.1.0wdenk2004-04-10-1/+1
|
* * Patch by Mark Jonas: Remove config.tmp files only whenwdenk2004-04-08-22/+26
| | | | | | | | unconfiguring the board * Adapt RMU board for bigger flash memory * Test fix for ethernet problems on MPC5200
* * Patch by Klaus Heydeck, 13 Mar 2003:wdenk2004-03-25-86/+463
| | | | Add support for KUP4X Board
* Code cleanupwdenk2004-03-25-34/+34
|
* * Patch by Pavel Bartusek, 21 Mar 2004wdenk2004-03-25-0/+85
| | | | | | | | Add Reiserfs support * Patch by Hinko Kocevar, 20 Mar 2004 - Add auto-release for SMSC LAN91c111 driver - Add save/restore of PTR and PNR regs as suggested in datasheet
* * Patch by Stephen Williams, 19 March 2004wdenk2004-03-23-0/+2
| | | | | | | | | | | | | | | Increase speed of sector reads from SystemACE, shorten poll timeout and remove a useless reset * Patch by Tolunay Orkun, 19 Mar 2004: Make GigE PHY 1000Mbps Speed/Duplex detection conditional (CONFIG_PHY_GIGE) * Patch by Brad Kemp, 18 Mar 2004: prevent machine checks during a PCI scan * Patch by Pierre Aubert, 18 Mar 2004: Fix string cleaning in IDE identification
* * Patch by Pierre Aubert, 18 Mar 2004:wdenk2004-03-23-1/+2
| | | | | | | | | | | | | | | | - Unify video mode handling for Chips & Technologies 69000 Video chip and Silicon Motion SMI 712/710/810 Video chip - Add selection of the video output (CRT or LCD) via 'videoout' environment variable for the Silicon Motion - README update * Patch by Pierre Aubert, 18 Mar 2004: include/common.h typo fix * Patches by Tolunay Orkun, 17 Mar 2004: - Add support for bd->bi_iic_fast[] initialization via environment variable "i2cfast" (CONFIG_I2CFAST) - Add "i2cfast" u-boot environment variable support for csb272
* * Patch by Carl Riechers, 17 Mar 2004:wdenk2004-03-23-1/+1
| | | | | | | | Ignore '\0' characters in console input for use with telnet and telco pads. * Patch by Leon Kukovec, 17 Mar 2004: typo fix for strswab prototype #ifdef
* * Patches by Thomas Viehweger, 16 Mar 2004:wdenk2004-03-23-0/+1
| | | | | | | | | - show PCI clock frequency on MPC8260 systems - add FCC_PSMR_RMII flag for HiP7 processors - in do_jffs2_fsload(), take load address from load_addr if not set explicit, update load_addr otherwise - replaced printf by putc/puts when no formatting is needed (smaller code size, faster execution)
* * Add start-up delay to make sure power has stabilized beforewdenk2004-03-23-11/+1184
| | | | | | | | | | | | | | | | | attempting to switch on USB on SX1 board. * Patch by Josef Wagner, 18 Mar 2004: - Add support for MicroSys XM250 board (PXA255) - Add support for MicroSys PM828 board (MPC8280) - Add support for 32 MB Flash on PM825/826 - new SDRAM refresh rate for PM825/PM826 - added support for MicroSys PM520 (MPC5200) - replaced Query by Identify command in CPU86/flash.c to support 28F160F3B * Fix wrap around problem with udelay() on ARM920T * Add support for Macronix flash on TRAB board
* Patch by Pierre Aubert, 15 Mar 2004:wdenk2004-03-17-4/+3
| | | | Fix buffer overflow in IDE identification
* * Patch by Steven Scholz, 27 Feb 2004:wdenk2004-03-15-5/+4
| | | | | | | | - Adding get_ticks() and get_tbclk() for AT91RM9200 - Many white space fixes in cpu/at91rm9200/interrupts.c * Patches by Steven Scholz, 20 Feb 2004: some cleanup in AT91RM9200 related code
* Code cleanup; make several boards compile & link.wdenk2004-03-14-102/+108
|
* * Patches by Travis Sawyer, 12 Mar 2004:wdenk2004-03-14-6/+190
| | | | | | | | | | | | | | | | | | | | | - Fix Gigabit Ethernet support for 440GX - Add Gigabit Ethernet Support to MII PHY utilities * Patch by Brad Kemp, 12 Mar 2004: Fixes for drivers/cfi_flash.c: - Better support for x8/x16 implementations - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE - Added defines for AMD command and address constants * Patch by Leon Kukovec, 12 Mar 2004: Fix get_dentfromdir() to correctly handle deleted dentries * Patch by George G. Davis, 11 Mar 2004: Remove hard coded network settings in TI OMAP1610 H2 default board config * Patch by George G. Davis, 11 Mar 2004: add support for ADS GraphicsClient+ board.
* * Patch by Pierre Aubert, 11 Mar 2004:wdenk2004-03-14-8/+12
| | | | | | | | | | | - add bitmap command and splash screen support in cfb console - add [optional] origin in the bitmap display command * Patch by Travis Sawyer, 11 Mar 2004: Fix ocotea board early init interrupt setup. * Patch by Thomas Viehweger, 11 Mar 2004: Remove redundand code; add PCI-specific bits to include/mpc8260.h
* * Patch by Stephan Linz, 09 Mar 2004wdenk2004-03-14-0/+1108
| | | | | | | | | | | - Add support for the SSV ADNP/ESC1 (Nios Softcore) * Patch by George G. Davis, 9 Mar 2004: fix recent build failure for SA1100 target * Patch by Travis Sawyer, 09 Mar 2004: Support native interrupt mode for the IBM440GX. Previously it was running in 440GP compatibility mode.
* * Patch by Philippe Robin, 09 Mar 2004:wdenk2004-03-14-0/+565
| | | | | | | | | | | | Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference Platform support. * Patch by Masami Komiya, 08 Mar 2004: Don't overwrite server IP address or boot file name when the boot server does not return values * Patch by listmember@orkun.us, 5 Mar 2004: Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC
* * Patch by Tolunay Orkun, 5 Mar 2004:wdenk2004-03-14-9/+78
| | | | | | | | | | | | | Fix early board initialization for Cogent CSB272 board * Patch by Ed Okerson, 3 Mar 2004: fix CFI flash writes for little endian systems * Patch by Reinhard Meyer, 01 Mar 2004: generalize USB and IDE support for MPC5200 with according changes to IceCube.h and TOP5200.h add Am29LV256 256 MBit FLASH support for TOP5200 boards add info about USB and IDE to README
* * Patch by Yuli Barcohen, 4 Mar 2004:wdenk2004-03-14-0/+10
| | | | | | | | | | | | | | | | | Fix problems with GCC 3.3.x which changed handling of global variables explicitly initialized to zero (now in .bss instead of .data as before). * Patch by Leon Kukovec, 02 Mar 2004: add strswab() to fix IDE LBA capacity, firmware and model numbers on little endian machines * Patch by Masami Komiya, 02 Mar 2004: - Remove get_ticks() from NFS code - Add verification of RPC transaction ID * Patch by Pierre Aubert, 02 Mar 2004: cleanup for IDE and USB drivers for MPC5200
* * Patch by Travis Sawyer, 01 Mar 2004:wdenk2004-03-14-85/+656
| | | | | | | | | | | | | | | | | | | Ocotea: - Add IBM PPC440GX Ref Platform support (Ocotea) Original code by Paul Reynolds <PaulReynolds@lhsolutions.com> Adapted to U-Boot and 440GX port 440gx_enet.c: - Add gracious handling of all Ethernet Pin Selections for 440GX - Add RGMII selection for Cicada CIS8201 Gigabit PHY ppc440.h: - Add needed bit definitions - Fix formatting * Patch by Carl Riechers, 1 Mar 2004: Add PPC440GX prbdv0 divider to fix memory clock calculation. * Patch by Stephan Linz, 27 Feb 2004 - avoid problems for targets without NFS download support
* * Patch by Rune Torgersen, 27 Feb 2004:wdenk2004-03-13-11/+27
| | | | | | | | | | | | | | | | | - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA) - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF) - Added support for 64bit strtoul (CFG_64BIT_STRTOUL) * Patch by Masami Komiya, 27 Feb 2004: Fix rarpboot: add autoload by NFS * Patch by Dan Eisenhut, 26 Feb 2004: fix flash_write return value in saveenv * Patch by Stephan Linz, 11 Dec 2003 expand config.mk to avoid trigraph warnings on NIOS * Rename "BMS2003" board into "HMI10"
* SX1 patches: use "serial#" for USB serial #;wdenk2004-03-12-3/+5
| | | | | use redundand environment storage; auto-set console on USB port (using preboot command)
* Add support for Siemens SX1 mobile phone;wdenk2004-03-12-1/+1703
| | | | | add support for USB-based console (enable with "setenv stdout usbtty; setenv stdin usbtty")
* * Patch by Travis Sawyer, 26 Feb 2004:wdenk2004-02-27-1/+5
| | | | | | | | | | Fix broken compile for XPEDITE1K target. * Patch by Stephan Linz, 26 Feb 2004: Bug fix for NFS code on NIOS targets * Patch by Stephen Williams, 26 Feb 2004: Break up SystemACE reads of large block counts
* * Patch by Pierre Aubert, 26 Feb 2004wdenk2004-02-27-5/+68
| | | | | | | | | | | add IDE support for MPC5200 * Patch by Masami Komiya, 26 Feb 2004: add autoload via NFS * Patch by Stephen Williams Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses elsewhere in the source.
* * Patch by Markus Pietrek, 24 Feb 2004:wdenk2004-02-26-2/+1920
| | | | | | | | | | | | | NS9750 DevBoard added * Patch by Pierre AUBERT, 24 Feb 2004 add USB support for MPC5200 * Patch by Steven Scholz, 24 Feb 2004: - fix MII commands to use values from last command * Patch by Torsten Demke, 24 Feb 2004: Add support for the eXalion platform (SPSW-8240, F-30, F-300)
* * Patch by Rahul Shanbhag, 19 Feb 2004:wdenk2004-02-26-1/+3
| | | | | | | | | | Fixes for for OMAP1610 board: - shift some IRQ specific code to platform.S file - remove duplicatewatchdog reset code from start.S * Make Auto-MDIX Support configurable on INCA-IP board * Fix license for mkimage tool
* * Patch by Masami Komiy, 22 Feb 2004:wdenk2004-02-24-14/+16
| | | | | | Add support for NFS for file download * Minor code cleanup
* * Patch by Andrea Scian, 17 Feb 2004:wdenk2004-02-24-0/+491
| | | | | | | | Add support for S3C44B0 processor and DAVE B2 board * Patch by Steven Scholz, 20 Feb 2004: - Add support for MII commands on AT91RM9200 boards - some cleanup in AT91RM9200 ethernet code