summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* NAND: Add support for MPC8572DS boardHaiying Wang2008-10-29-1/+55
| | | | | | | | | | | | | This patch defines 1M TLB&LAW size for NAND on MPC8572DS, assigns 0xffa00000 for CONFIG_SYS_NAND_BASE and adds other NAND supports in config file. It also moves environment(CONFIG_ENV_ADDR) outside of u-boot image, to make room for the increased code size with NAND enabled. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Make Freescale local bus registers available for both 83xx and 85xx.Haiying Wang2008-10-29-135/+138
| | | | | | | | | | | | | - Rename lbus83xx_t to fsl_lbus_t and move it to asm/fsl_lbc.h so that it can be shared by both 83xx and 85xx - Remove lbus83xx_t and replace it with fsl_lbus_t in all 83xx boards files which use lbus83xx_t. - Move FMR, FIR, FCR, FPAR, LTESR from mpc83xx.h to asm/fsl_lbc.h so that 85xx can share them. Signed-off-by: Jason Jin <Jason.Jin@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: sync with 2.6.27Scott Wood2008-10-29-17/+47
| | | | | | | | | | | | | This brings the core NAND code up to date with the Linux kernel. Since there were several drivers in Linux as of the last update that are not in u-boot, I'm not bringing over new drivers that have been added since in the absence of an interested party. I did not update OneNAND since it was recently synced by Kyungmin Park, and I'm not sure exactly what the common ancestor is. Signed-off-by: Scott Wood <scottwood@freescale.com>
* bootm: Add subcommandsKumar Gala2008-10-29-1/+19
| | | | | | | | | | | | | | Add the ability to break the steps of the bootm command into several subcommands: start, loados, ramdisk, fdt, bdt, cmdline, prep, go. This allows us to do things like manipulate device trees before they are passed to a booting kernel or setup memory for a secondary core in multicore situations. Not all OS types support all subcommands (currently only start, loados, ramdisk, fdt, and go are supported). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2008-10-28-0/+3
|\
| * lcd: Let the board code show board-specific infoHaavard Skinnemoen2008-10-27-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | The information displayed when CONFIG_LCD_INFO is set is inherently board-specific, so it should be done by the board code. The current code dealing with this only handles two cases, and is already a horrible mess of #ifdeffery. Yes, this duplicates some code, but it also allows boards to print more board-specific information; this used to be very difficult. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * atmel_lcdfb: Eliminate unneeded #include <asm/arch/hardware.h>Haavard Skinnemoen2008-10-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | atmel_lcdfb doesn't actually need anything from asm/arch/hardware.h. It includes a file that does, asm/arch/gpio.h, but this file doesn't include <asm/arch/hardware.h> like it's supposed to. Add the missing include to asm/arch/gpio.h and remove the workaround from the atmel_lcdfb driver. This makes the driver compile on avr32. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Merge branch 'denx'Andy Fleming2008-10-27-0/+263
|\ \
| * \ Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2008-10-27-89/+44
| |\ \
| * | | ppc4xx: New board avnet fx12 minimodulGeorg Schardt2008-10-24-0/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the avnet fx12 minimodul. It needs the "ppc4xx: Generic architecture for xilinx ppc405" patch from Ricardo. Signed-off-by: Georg Schardt <schardt@team-ctech.de> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | ppc4xx: Generic architecture for xilinx ppc405(v3)Ricardo Ribalda Delgado2008-10-24-0/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As "ppc44x: Unification of virtex5 pp440 boards" did for the xilinx ppc440 boards, this patch presents a common architecture for all the xilinx ppc405 boards. Any custom xilinx ppc405 board can be added very easily with no code duplicity. This patch also adds a simple generic board, that can be used on almost any design with xilinx ppc405 replacing the file ppc405-generic/xparameters.h This patch is prepared to work with the latest version of EDK (10.1) Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | ppc4xx: Disable DDR2 autocalibration on Kilauea for nowStefan Roese2008-10-24-0/+7
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the new autocalibration still has some problems on some Kilauea boards with 200MHz DDR2 frequency we disable the autocalibration and use the hardcoded values as done before. This seems to work reliably on all known DDR2 frequencies. After the autocalibration issue is fixed we will enable it again. Signed-off-by: Stefan Roese <sr@denx.de>
* | | 85xx: Update MPC85xx_PORDEVSR_IO_SEL maskPeter Tyser2008-10-27-1/+1
| |/ |/| | | | | | | | | | | | | | | The MPC8572 has a 4-bit wide PORDEVSR IO_SEL field. Other MPC85xx processors have a 3-bit wide IO_SEL field but have the most significant bit is wired to 0 so this change should not affect them. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | 86xx: Convert all fsl_pci_init users to new APIsKumar Gala2008-10-24-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | Converted MPC8610HCPD, MPC8641HPCN, and SBC8641D to use fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup(). With these changes the board code is a bit smaller and we get dma-ranges set in the device tree for these boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> Acked-by: Jon Loeliger <jdl@freescale.com>
* | 85xx: Convert all fsl_pci_init users to new APIsKumar Gala2008-10-24-40/+0
| | | | | | | | | | | | | | | | | | | | | | | | Converted ATUM8548, MPC8536DS, MPC8544DS, MPC8548CDS, MPC8568MDS, MPC8572DS, TQM85xx, and SBC8548 to use fsl_pci_setup_inbound_windows() and ft_fsl_pci_setup(). With these changes the board code is a bit smaller and we get dma-ranges set in the device tree for these boards. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
* | fdt: Added helper to set PCI dma-ranges propertyKumar Gala2008-10-24-0/+5
| | | | | | | | | | | | | | | | | | | | | | Added fdt_pci_dma_ranges() that parses the pci_region info from the struct pci_controller and populates the dma-ranges based on it. The max # of windws/dma-ranges we support is 3 since on embedded PowerPC based systems this is the max number of windows. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
* | fdt: Add fdt_getprop_u32_default helpersKumar Gala2008-10-24-0/+2
| | | | | | | | | | | | | | | | | | Add helper functions to return find a node and return it's property or a default value. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> Acked-by: Gerald Van Baren <vanbaren@cideas.com>
* | 86xx: Enable 64-bit PCI resources on all Freescale boardsKumar Gala2008-10-24-0/+2
| | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
* | 85xx: Enable 64-bit PCI resources on all Freescale boardsKumar Gala2008-10-24-0/+9
| | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com>
* | pci: Allow for PCI addresses to be 64-bitKumar Gala2008-10-24-16/+24
| | | | | | | | | | | | | | | | | | | | PCI bus is inherently 64-bit. While not all system require access to the full 64-bit PCI address range some do. This allows those systems to enable the full PCI address width via CONFIG_SYS_PCI_64BIT. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Fleming-AFLEMING <afleming@freescale.com> Acked-by: Wolfgang Denk <wd@denx.de>
* | 85xx: remove unused config definitionDave Liu2008-10-24-18/+0
| | | | | | | | Signed-off-by: Dave Liu <daveliu@freescale.com>
* | 85xx: Add basic e500mc core supportKumar Gala2008-10-24-0/+2
|/ | | | | | | | | | | Introduce CONFIG_E500MC to deal with the minor differences between e500v2 and e500mc. * Certain fields of HID0/1 don't exist anymore on e500mc * Cache line size is 64-bytes on e500mc * reset value of PIR is different Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* mpc83xx: add support for switching between USB Host/Function for MPC837XEMDSAnton Vorontsov2008-10-21-0/+2
| | | | | | | | | | With this patch u-boot can fixup the dr_mode and phy_type properties for the Dual-Role USB controller. While at it, also remove #ifdefs around includes, they are not needed. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: add ELBC NAND support for the MPC837XEMDS boardsAnton Vorontsov2008-10-21-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Though NAND chip is replaceable on the MPC837XE-MDS boards, the current settings don't work with the default chip on the board. Nevertheless Freescale's U-Boot sets the option register correctly, so I just dumped the register from the working u-boot. My guess is that the old settings were applicable for some pilot boards, not found in the production. This patch also enables FSL ELBC driver so that we could access the NAND storage in the u-boot. The NAND support costs about 45KB, so the u-boot no longer fits into two 128KB NOR flash sectors, thus we also have to adjust environment location: add another 128KB to the monitor length. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> It is due to hardware design and logic defect, that is the I/O[0:7] of NAND chip is connected to LAD[7:0], so when the NAND chip connected to nLCS3, you have to set up the OR3[BCTLD] = '1' for normal operation, otherwise it will have bus contention due to the pin 48/25 of U60 is enabled. Setup the OR3[BCTLD] = '1' , that meaning the LBCTL is not asserted upon access to the NAND chip, keep the default state. Acked-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boardsAnton Vorontsov2008-10-21-0/+3
| | | | | | | | | | | | | | | | | | | | | | | The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB, standalone or acting as a PCI agent. User's Guide says: - When the CPLD recognizes its location on the PIB it automatically configures RCW to the PCI Host. - If the CPLD fails to recognize its location then it is automatically configured as an Agent and the PCI is configured to an external arbiter. This sounds good. Though in the standalone setup the CPLD sets PCI_HOST flag (it's ok, we can't act as PCI agents since we receive CLKIN, not PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without any arbiter bad things will happen (here the board hangs during any config space reads). In this situation we must disable the PCI. And in case of anybody really want to use an external arbiter, we provide "pci_external_aribter" environment variable. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: add SGMII riser module support for the MPC8378E-MDS boardsAnton Vorontsov2008-10-21-0/+2
| | | | | | | | | | This involves configuring the SerDes and fixing up the flags and PHY addresses for the TSECs. For Linux we also fix up the device tree. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: add TSECs' HRCWH masks for MPC837x processorsAnton Vorontsov2008-10-21-0/+2
| | | | | | | We'll use these masks to parse TSEC modes out of HRCWH. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: serdes: add forgotten shifts for rfcksAnton Vorontsov2008-10-21-5/+5
| | | | | | | | | | The rfcks should be shifted by 28 bits left. We didn't notice the bug because we were using only 100MHz clocks (for which rfcks == 0). Though, for SGMII we'll need 125MHz clocks. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: mpc8360emds: rework LBC SDRAM setupAnton Vorontsov2008-10-21-14/+11
| | | | | | | | | | | | | | | | | | | Currently 64M of LBC SDRAM are mapped at 0xF0000000 which makes it difficult to use (b/c then the memory is discontinuous and there is quite big memory hole between the DDR/SDRAM regions). This patch reworks LBC SDRAM setup so that now we dynamically place the LBC SDRAM near the DDR (or at 0x0 if there isn't any DDR memory). With this patch we're able to: - Boot without external DDR memory; - Use most "DDR + SDRAM" setups without need to support for sparse/discontinuous memory model in the software. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* FDT: don't use private kernel header filesWolfgang Denk2008-10-21-14/+25
| | | | | | | | | | | | | | On some systems (for example Fedora Core 4) U-Boot builds with the following wanrings only: ... In file included from /home/wd/git/u-boot/include/libfdt_env.h:33, from fdt.c:51: /usr/include/asm/byteorder.h:6:2: warning: #warning using private kernel header; include <endian.h> instead! This patch fixes this problem. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2008-10-21-293/+781
|\
| * ppc4xx: Correctly setup ranges property in ebc nodeStefan Roese2008-10-21-0/+31
| | | | | | | | | | | | | | | | Previously only the NOR flash mapping was written into the ranges property of the ebc node. This patch now writes all enabled chip select areas into the ranges property. Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Add GDSys neo 405EP board supportDirk Eibach2008-10-21-0/+231
| | | | | | | | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Update configs for Netstal boardsNiklaus Giger2008-10-21-275/+292
| | | | | | | | | | | | | | | | | | | | I reorganized my config files, putting the common stuff into netstal-common.h (got the idea by looking a amcc-common.h from Stefan). Added stuff to boot the new powerpc linux via NFS (only tested with HCU4). Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Add routine to retrieve CPU numberAdam Graham2008-10-21-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Provide a weak defined routine to retrieve the CPU number for reference boards that have multiple CPU's. Default behavior is the existing single CPU print output. Reference boards with multiple CPU's need to provide a board specific routine. See board/amcc/arches/arches.c for an example. Signed-off-by: Adam Graham <agraham@amcc.com> Signed-off-by: Victor Gallardo <vgallardo@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * ppc4xx: Add AMCC Arches board support (dual 460GT)Adam Graham2008-10-21-18/+224
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The Arches Evaluation board is based on the AMCC 460GT SoC chip. This board is a dual processor board with each processor providing independent resources for Rapid IO, Gigabit Ethernet, and serial communications. Each 460GT has it's own 512MB DDR2 memory, 32MB NOR FLASH, UART, EEPROM and temperature sensor, along with a shared debug port. The two 460GT's will communicate with each other via shared memory, Gigabit Ethernet and x1 PCI-Express. Signed-off-by: Adam Graham <agraham@amcc.com> Signed-off-by: Victor Gallardo <vgallardo@amcc.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | TQM8260: environment in flash instead EEPROM, baudrate 115kWolfgang Denk2008-10-21-20/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Several customers have reported problems with the environment in EEPROM, including corrupted content after board reset. Probably the code to prevent I2C Enge Conditions is not working sufficiently. We move the environment to flash now, which allows to have a backup copy plus gives much faster boot times. Also, change the default console initialization to 115200 bps as used on most other boards. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | strmhz(): Round numbers when printing clock frequenciesWolfgang Denk2008-10-21-2/+3
| | | | | | | | | | | | | | | | | | Round clock frequencies for printing. Many boards printed off clock frequencies like 399 MHz instead of the exact 400 MHz because numberes were not rounded. This is fixed now. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | 85xx: properly document MPC85xx_PORDEVSR2_SEC_CFGTimur Tabi2008-10-21-0/+1
| | | | | | | | | | | | | | | | | | Commit f7d190b1 corrected the value of MPC85xx_PORDEVSR2_SEC_CFG, but forgot to add a comment that the correct value disagrees with the 8544 reference manual. The changelog for that commit is also wrong, as it says "bit 28" when it should be "bit 24". Signed-off-by: Timur Tabi <timur@freescale.com>
* | Merge git://git.denx.de/u-boot into x1Markus Klotzbuecher2008-10-21-36925/+37419
|\ \ | |/ | | | | | | | | Conflicts: drivers/usb/usb_ohci.c
| * Merge 'next' branchWolfgang Denk2008-10-18-36787/+37274
| |\ | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/freescale/mpc8536ds/mpc8536ds.c include/configs/mgcoge.h Signed-off-by: Wolfgang Denk <wd@denx.de>
| | * mgcoge: add redundant environment sectorHeiko Schocher2008-10-18-0/+5
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| | * mgsuvd: update size of environmentHeiko Schocher2008-10-18-3/+1
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| | * Enabled the Freescale SGMII riser card on 8536DSJason Jin2008-10-18-0/+3
| | | | | | | | | | | | Signed-off-by: Jason Jin <Jason.jin@freescale.com>
| | * Enabled the Freescale SGMII riser card on 8572DSLiu Yu2008-10-18-0/+24
| | | | | | | | | | | | | | | | | | | | | This patch based on Andy's work. Including command 'pixis_set_sgmii' support. Signed-off-by: Liu Yu <yu.liu@freescale.com>
| | * Make pixis_set_sgmii more general to support MPC85xx boards.Liu Yu2008-10-18-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pixis sgmii command depend on the FPGA support on the board, some 85xx boards support SGMII riser card but did not support this command, define CONFIG_PIXIS_SGMII_CMD for those boards which support the sgmii command. Not like 8544, 8572 has 4 eTsec so that the other two's pixis bits are not supported by 8544. Therefor, define PIXIS_VSPEED2_MASK and PIXIS_VCFGEN1_MASK in header file for both boards. Signed-off-by: Liu Yu <yu.liu@freescale.com>
| | * Add ddr interleaving suppport for MPC8572DS boardHaiying Wang2008-10-18-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Add board specific parameter table to choose correct cpo, clk_adjust, write_data_delay, 2T based on board ddr frequency and n_ranks. * Set odt_rd_cfg and odt_wr_cfg based on the dimm# and CS#. * Set memory controller interleaving mode to bank interleaving, and disable bank(chip select) interleaving mode by default, because the default on-board DDR DIMMs are 2x512MB single-rank. * Change CONFIG_ICS307_REFCLK_HZ from 33333333 to 33333000. Signed-off-by: James Yang <James.Yang@freescale.com> Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
| | * Pass dimm parameters to populate populate controller optionsHaiying Wang2008-10-18-0/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because some dimm parameters like n_ranks needs to be used with the board frequency to choose the board parameters like clk_adjust etc. in the board_specific_paramesters table of the board ddr file, we need to pass the dimm parameters to the board file. * move ddr dimm parameters header file from /cpu to /include directory. * add ddr dimm parameters to populate board specific options. * Fix fsl_ddr_board_options() for all the 8xxx boards which call this function. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
| | * Make DDR interleaving mode work correctlyHaiying Wang2008-10-18-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix some bugs: 1. Correctly set intlv_ctl in cs_config. 2. Correctly set sa, ea in cs_bnds when bank interleaving mode is enabled. 3. Set base_address and total memory for each ddr controller in memory controller interleaving mode. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
| | * 85xx: Enable interrupt and setexpr commands on Freescale 85xx boardsKumar Gala2008-10-18-0/+18
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.1 at 2024-12-30 11:53:38 +0000