summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* TQM885D: Exchanged SDRAM timing by a more relaxed timing.Jens Gehrlein2007-12-27-1/+1
| | | | | | | | CAS-Latency=2, Write Recovery Time tWR=2 The max. supported bus frequency is 66 MHz. Therefore, changed threshold to switch from 1:1 mode to 2:1 from 80 MHz to 66 MHz. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* TQM885D: use calculated cpuclk instead of measuring itMartin Krause2007-12-27-7/+0
| | | | | | | | | On the TQM885D the measurement of cpuclk with the PIT reference timer ist not necessary. Since all module variants use the same external 10 MHz oscillator, the cpuclk only depends on the PLL configuration - which is readable by software. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* TQM885D: fix SDRAM refreshJens Gehrlein2007-12-27-16/+20
| | | | | | | | | | | | At 133 MHz the current SDRAM refresh rate is too fast (measured 4 * 1.17 us). CFG_MAMR_PTA changes from 39 to 128. This result in a refresh rate of 4 * 7.8 us at the default clock 66 MHz. At 133 MHz the value will be then 4 * 3.8 us. This is a compromise until a new method is found to adjust the refresh rate. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* TQM860M: Support for 10col SDRAMs, max. 128 MiBJens Gehrlein2007-12-27-2/+5
| | | | Signed-off-by: Martin Krause <martin.krause@tqs.de>
* Merge branch 'master' of git://www.denx.de/git/u-boot-shWolfgang Denk2007-12-27-0/+3362
|\ | | | | | | | | | | | | | | Conflicts: MAINTAINERS Signed-off-by: Wolfgang Denk <wd@denx.de>
| * Merge git://www.denx.de/git/u-bootNobuhiro Iwamatsu2007-12-07-1/+1
| |\
| * \ Merge git://www.denx.de/git/u-bootNobuhiro Iwamatsu2007-12-07-95/+657
| |\ \ | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/Makefile
| * \ \ Merge git://www.denx.de/git/u-bootNobuhiro Iwamatsu2007-11-29-580/+1096
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/Makefile
| * | | | sh: Add support Renesas sh7722 processor and Hitachi MS7722SE01 boardNobuhiro Iwamatsu2007-09-23-0/+1474
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | sh: Update MS7750SE01 platformNobuhiro Iwamatsu2007-09-23-23/+56
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | sh: Remove comment out code from include/asm-sh/cpu_sh4.hNobuhiro Iwamatsu2007-09-23-7/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | sh: Update core code of SuperH.Nobuhiro Iwamatsu2007-09-23-211/+704
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | Merge git://www.denx.de/git/u-bootNobuhiro Iwamatsu2007-09-23-8880/+33408
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: CREDITS
| * | | | | sh: MS7750SE support.Nobuhiro Iwamatsu2007-05-13-0/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Hitachi MS7750SE. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | | sh: First support code of SuperH.Nobuhiro Iwamatsu2007-05-13-0/+1294
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | | | | | Merge branch 'master' of git://www.denx.de/git/u-boot-avr32Wolfgang Denk2007-12-27-0/+419
|\ \ \ \ \ \
| * | | | | | AVR32: Add support for the ATSTK1004 boardHaavard Skinnemoen2007-12-17-0/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ATSTK1004 is a daughterboard for ATSTK1000 with the AT32AP7002 CPU, which is a derivative of AT32AP7000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | | | | | AVR32: Add support for the ATSTK1003 boardHaavard Skinnemoen2007-12-17-0/+184
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ATSTK1003 is a daughterboard for ATSTK1000 with the AT32AP7001 CPU, which is a derivative of AT32AP7000. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | | | | | AVR32: Make some AT32AP700x peripherals optionalHaavard Skinnemoen2007-12-17-0/+50
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a chip-features file providing definitions of the form AT32AP700x_CHIP_HAS_<peripheral> to indicate the availability of the given peripheral on the currently selected chip. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | | | | | AVR32: Rename at32ap7000 -> at32ap700xHaavard Skinnemoen2007-12-17-0/+0
| | |_|_|_|/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SoC-specific code for all the AT32AP700x CPUs is practically identical; the only difference is that some chips have less features than others. By doing this rename, we can add support for the AP7000 derivatives simply by making some features conditional. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* | | | | | Merge branch 'testing' of git://www.denx.de/git/u-boot-fdtWolfgang Denk2007-12-27-0/+1
|\ \ \ \ \ \
| * | | | | | Add common memory fixup functionKumar Gala2007-12-07-0/+1
| |/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the function fdt_fixup_memory() to fixup the /memory node of the fdt Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | | | Introduce map_physmem() and unmap_physmem()Haavard Skinnemoen2007-12-13-0/+267
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | map_physmem() returns a virtual address which can be used to access a given physical address without involving the cache. unmap_physmem() should be called when the virtual address returned by map_physmem() is no longer needed. This patch adds a stub implementation which simply returns the physical address cast to a uchar * for all architectures except AVR32, which converts the physical address to an uncached virtual mapping. unmap_physmem() is a no-op on all architectures, but if any architecture needs to do such mappings through the TLB, this is the hook where those TLB entries can be invalidated. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* | | | | | Implement __raw_{read,write}[bwl] on all architecturesHaavard Skinnemoen2007-12-13-1/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds implementations of __raw_read[bwl] and __raw_write[bwl] to m68k, ppc, nios and nios2. The m68k and ppc implementations were taken from Linux. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* | | | | | CFI: synchronize command offsets with Linux CFI driverBartlomiej Sieka2007-12-13-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes non-working CFI Flash on the Inka4x0 board. Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
* | | | | | CFI: support JEDEC flash roms in CFI-flash frameworkMichael Schwingen2007-12-08-0/+10
|/ / / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following patch adds support for non-CFI flash ROMS, by hooking into the CFI flash code and using most of its code, as recently discussed here in the thread "Mixing CFI and non-CFI flashs". Signed-off-by: Michael Schwingen <michael@schwingen.org> Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | ADS5121 Board: fix compile problem.Wolfgang Denk2007-12-06-1/+1
| |_|_|/ |/| | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | Cleanup coding style; update CHANGELOGWolfgang Denk2007-11-26-16/+16
| | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | Add additional fdt fixup helper functionsKumar Gala2007-11-21-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added the following fdt fixup helpers: * do_fixup_by_prop{_u32} - Find matching nodes by property name/value * do_fixup_by_compat{_u32} - Find matching nodes by compat The _u32 variants work the same only the property they are setting is know to be a 32-bit integer instead of a byte buffer. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | Add fdt_fixup_ethernet helper to set mac addressesKumar Gala2007-11-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Added a fixup helper that uses aliases to set mac addresses in the device tree based on the bd_t Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | Update libfdt from device tree compiler (dtc)Kumar Gala2007-11-21-104/+658
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Update libfdt to commit 8eaf5e358366017aa2e846c5038d1aa19958314e from the device tree compiler (dtc) project. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | Move do_fixup* for libfdt into common codeKumar Gala2007-11-21-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Moved the generic fixup handling code out of cpu/mpc5xxx and cpu/mpc8260 into common/fdt_support.c and renamed: do_fixup() -> do_fixup_by_path() do_fixup_u32() -> do_fixup_by_path_u32() Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | Removed some nonused fdt functions and moved fdt_find_and_setprop out of libfdtKumar Gala2007-11-21-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Removed: fdt_node_is_compatible fdt_find_node_by_type fdt_find_compatible_node To ease merge of newer libfdt as we aren't using them anywhere at this time. Also moved fdt_find_and_setprop out of libfdt into fdt_support.c for the same reason. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | [BUILD] conditionally compile common/cmd_*.c in common/MakefileGrant Likely2007-11-20-2/+0
| |_|/ |/| | | | | | | | | | | | | | | | | Modify common/Makefile to conditionally compile the cmd_*.c files based on the board config. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
* | | Merge branch 'origin' into kconfig-for-1.3.1Grant Likely2007-11-20-7/+5
|\ \ \
| * | | Move CONFIG_QE out of CONFIG_PCI wrap for MPC8568MDSHaiying Wang2007-11-19-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | CONFIG_QE shouldn't be in the wrap of CONFIG_PCI, fix it. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
| * | | Fix build problems with mp2usb boardWolfgang Denk2007-11-19-2/+0
| | | | | | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | Merge branch 'origin' into kconfig-for-1.3.1Grant Likely2007-11-16-70/+118
|\ \ \ \ | |/ / / | | | | | | | | | | | | | | | | Conflicts: drivers/Makefile
| * | | Merge branch 'master' of git://www.denx.de/git/u-boot-coldfireWolfgang Denk2007-11-17-15/+33
| |\ \ \
| | * | | ColdFire: MCF5329 - Remove reset registers from CCMTsiChungLiew2007-11-08-12/+9
| | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | * | | ColdFire: MCF5329 - Add Reset structure to immap_5329.hTsiChungLiew2007-11-08-0/+5
| | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | * | | ColdFire: MCF5329 - revert include/asm-m68k/m5329.h file modeTsiChungLiew2007-11-08-0/+0
| | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | * | | ColdFire: MCF5445x - Update correct RAMBAR and missing linker filesTsiChungLiew2007-11-07-2/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | * | | ColdFire: MCF532x - Update do_reset() using core resetTsiChungLiew2007-11-07-1/+17
| | | | | | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| * | | | Fix the i2c frequency and default address in rsdproto boardLuotao Fu2007-11-17-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rsdproto board support has wrong I2C frequency and wrong return value handling. Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
| * | | | powerpc: Backout relocation changes.Grant Likely2007-11-17-8/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Ugh. I *hate* to back this change out, but these compiler flags don't work for relocation on all versions of GCC. I've not been able to reproduce the environment in my setup (and hence, not been able to find a combination that *does* work), so I've got no choice but to go back to the old gcc flags and linker script. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| * | | | Fixed mips_io_port_base build errors.Jean-Christophe PLAGNIOL-VILLARD2007-11-17-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch has been sent on: - 29 Sep 2007 Although mips_io_port_base is currently a part of IDE command, it is quite fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move it to MIPS general part, and introduce `set_io_port_base()' from Linux. This patch is triggered by multiple definition of `mips_io_port_base' build error on gth2 (and tb0229 also needs this fix.) board/gth2/libgth2.a(gth2.o): In function `log_serial_char': /home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base' common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here make: *** [u-boot] Error 1 Signed-off-by: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | | | Merge branch 'master' of git://www.denx.de/git/u-boot-ppc4xxWolfgang Denk2007-11-17-2/+2
| |\ \ \ \
| | * \ \ \ Merge branch 'master' of git://www.denx.de/git/u-bootStefan Roese2007-11-13-268/+221
| | |\ \ \ \ | | | |/ / /
| | * | | | Merge git://www.denx.de/git/u-bootStefan Roese2007-10-27-86/+95
| | |\ \ \ \
generated by cgit v1.1 at 2024-12-12 15:32:13 +0000