summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* powerpc/mpc85xx/p2020rdb-pca: Use L2 SRAM for SPL bootScott Wood2012-11-26-36/+33
| | | | | | | | | | | | This allows DDR configuration to be deferred to the final U-Boot image, which is able to make use of SPD data. The SPL itself cannot use SPD due to code size constraints. It previously used fixed register values for DDR configuration, and those values did not work on the p2020rdb-pca board I tested with. It's possible that different revisions of the board require different settings. Using SPD eliminates that problem. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
* powerpc/mpc85xx/p1_p2_rdb_pc: clean up memory mapScott Wood2012-11-26-13/+9
| | | | | | | | | | | | | | | | | | | - Sort by address, and fix column alignment - Don't label things as localbus that aren't. Instead, put chipselect info at the end of the description for localbus windows. Note that NAND/NOR have their chipselects swapped when booting from NAND, and CS2 can be either PMC or VSC7385 depending on hwconfig. - Shrink NAND to the 32K that's actually mapped in the localbus - Assign an address and size to L2 SRAM. Remove the similarly named but unintelligible "L2 SDRAM(REV.)". - Remove the untrue comment about L1 stack being mapped with TLB0. Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
* powerpc/mpc85xx/p1_p2_rdb_pc: convert from nand_spl to new splScott Wood2012-11-26-26/+28
| | | | | Signed-off-by: Scott Wood <scottwood@freescale.com> Cc: Andy Fleming <afleming@freescale.com>
* spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC.Scott Wood2012-11-26-0/+42
| | | | | | | | | | | | | | Some small SPLs do not use nand_base.c, and a subset of those also require a special driver. Some SPLs need software ECC but others can't fit it. All existing boards that specify CONFIG_SPL_NAND_SUPPORT have these symbols added to preserve existing behavior. Signed-off-by: Scott Wood <scottwood@freescale.com> -- v2: use positive logic for including bits of NAND, rather than a MINIMAL symbol that excludes things.
* Merge branch 'master' of git://git.denx.de/u-boot-videoTom Rini2012-11-19-0/+91
|\
| * video: atmel: implement lcd_setcolreg functionBo Shen2012-11-10-0/+7
| | | | | | | | | | | | | | | | implement the common api lcd_setcolreg in include/lcd.h Signed-off-by: Bo Shen <voice.shen@atmel.com> [agust: fixed commit log and gcc 4.6 -Wparentheses warnings] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * lcd: Provide an API to access LCD parametersVadim Bendebury2012-11-07-0/+36
| | | | | | | | | | | | | | | | | | | | | | Create a basic API to provide access to lcd parameters such as screen size, and to position the cursor on the screen. This matches up with the video API for the same purpose. Unfortunately they are not yet combined. Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * video: Provide an API to access video parametersStefan Reinauer2012-11-06-0/+48
| | | | | | | | | | | | | | | | | | | | Create a basic API to provide access to video parameters such as screen size, and to position the cursor on the screen. Also add a prototype for video_display_bitmap() which was missing. Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini2012-11-19-88/+491
|\ \
| * | M68K: eb_cpu5282: general update and enhanced board supportJens Scharsig (BuS Elektronik)2012-11-14-36/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - update clock settings for higher perfomance - change standard baud rate to 115200 - fix flash base address - remove unused defines - add I2C support - switch form board dependent flash to cfi - remove board dependent flash code - use sdram bank 0 instead of bank 1 on boot - enable on board frame buffer instead external - remove fake mac address form config - add watchdog support - add status led support Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> [agust: fixed small style issues and build warning] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | power:pmic: Rename CONFIG_DIALOG_PMIC defines to CONFIG_DIALOG_POWERŁukasz Majewski2012-11-14-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Rename CONFIG_DIALOG_PMIC to CONFIG_DIALOG_POWER Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * | power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWERŁukasz Majewski2012-11-14-42/+42
| | | | | | | | | | | | | | | | | | | | | | | | Rename all CONFIG_PMIC* defines to CONFIG_POWER* Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * | arm:trats:pmic: Enable battery support at Samsung's TRATS boardŁukasz Majewski2012-11-14-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Support for TRATS battery has been added. It is treated as a "normal" power related device and thereof controlled by pmic/power subsystem. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * | arm:trats:pmic: Enable fuel-gauge (MAX17042) at Samsung's TRATS boardŁukasz Majewski2012-11-14-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | FG IC built into the MAX8997 device (compliant to MAX17042) is enabled at TRATS. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * | arm:trats:pmic: Enable MUIC (MAX8997) at Samsung's TRATS boardŁukasz Majewski2012-11-14-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | MUIC IC built into the MAX8997 device is enabled at TRATS. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * | arm:trats:pmic: Default PMIC(MAX8997) initialization for Samsung's TRATS boardŁukasz Majewski2012-11-14-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | Default PMIC (MAX8997) initialization for Samsung's TRATS development board. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * | pmic:max8997: Function for calculating LDO internal register valueŁukasz Majewski2012-11-14-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Function for calculating LDO internal register value from passed micro Volt. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * | pmic:fuel-gauge: Support for MAX17042 fuel-gaugeŁukasz Majewski2012-11-14-0/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for MAX17042 fuel-gauge (FG), which is built into the MAX8997 power management device. Special file - fg_battery_cell_params.h with cells characteristics added. The FG device will work with redesigned PMIC framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * | pmic:muic: Support for MUIC built into MAX8997 deviceŁukasz Majewski2012-11-14-0/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support for MUIC (Micro USB Integrated Circuit) built into the MAX8997 power management device. The MUIC device will work with redesigned PMIC framework. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * | pmic: Extend struct pmic to support battery and charger related operationsŁukasz Majewski2012-11-14-1/+67
| | | | | | | | | | | | | | | | | | | | | | | | Now it is possible to provide specific function per PMIC/power device instance. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| * | pmic:chrg: Common information about charger and battery (power_chrg.h)Łukasz Majewski2012-11-14-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | New power_chrg.h file has been added to "bind" together common information about charging battery available in the system. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * | pmic: Extend PMIC framework to support multiple instances of PMIC devicesŁukasz Majewski2012-11-14-7/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PMIC framework has been extended to support multiple instances of the variety of devices responsible for power management. This change allows supporting of e.g. fuel gauge, charger, MUIC (Micro USB Interface Circuit). Power related includes have been moved to ./include/power directory. This is a first of a series of patches - in the future "pmic" will be replaced with "power". Two important issues: 1. The PMIC needs to be initialized just after malloc is configured 2. It uses list to hold information about available PMIC devices Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Stefano Babic <sbabic@denx.de>
| * | pmic:i2c: Add I2C sensor byte order (big/little) to PMIC frameworkŁukasz Majewski2012-11-14-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | | | Since the pmic_reg_read is the u32 value, the order in which bytes are placed to form u32 value is important. Support for big and little sensor endianess is added. Moreover calls to [leXX|beXX]_to_cpu have been added to support little and big endian SoCs. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
* | nios2: remove asm/status_led.hThomas Chou2012-11-10-3/+2
| | | | | | | | | | | | | | | | | | The file has a wrong inline keyword of __led_toggle(), which causes compilation error. And its content is defined in common status_led.h. So define CONFIG_BOARD_SPECIFIC_LED in board config files and remove this header file. Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | nios2: use builtin functions for control registers accessThomas Chou2012-11-10-10/+2
| | | | | | | | | | | | | | | | | | | | | | | | The commit 51926d5ee0be029fb45f10f42756df97279f8ad3 COMMON: Use __stringify() instead of rest of implementations forgot to update the wrctl funtion, and causes compilation error. But there are builtin functions for control registers access in nios2 comipiler. It is convenient to use them instead. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Cc: Marek Vasut <marex@denx.de>
* | microblaze: Flush caches before enabling themMichal Simek2012-11-07-0/+4
|/ | | | | | | | Flushing caches is necessary because of soft reset which doesn't clear caches. Signed-off-by: Michal Simek <monstr@monstr.eu> Reviewed-by: Marek Vasut <marex@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-avr32Tom Rini2012-11-05-9/+0
|\
| * avr32: allow multi block mmc access for all boardsAndreas Bießmann2012-11-02-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 1db7377a70a8d931c32648e717695133120d5456 fixes the gen_atmel_mci driver to be able to use multi block access for avr32. Therefore remove the setting which forces single block access. This also adds a huge performace gain for mmc access: ---8<--- Loading file "/boot/uImage" from mmc device 0:1 1830666 bytes read in 1293 ms (1.3 MiB/s) --->8--- vs. ---8<--- Loading file "/boot/uImage" from mmc device 0:1 1830666 bytes read in 237 ms (7.4 MiB/s) --->8--- Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: haavard.skinnemoen@atmel.com Cc: hans-christian.egtvedt@atmel.com Cc: mpfj@mimc.co.uk Cc: alex.raimondi@miromico.ch Cc: julien.may@miromico.ch Cc: egtvedt@samfundet.no Cc: havard@skinnemoen.net
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-11-05-27/+801
|\ \
| * | arm: atmel: cpux9k2: add missing cache configsJens Scharsig (BuS Elektronik)2012-11-04-1/+4
| | | | | | | | | | | | | | | | | | | | | * add CONFIG_SYS_CACHELINE_SIZE to eb_cpux9k2 board config header * dissable dcache (CONFIG_SYS_DCACHE_OFF) for eb_cpux9k2 Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
| * | Merge remote-tracking branch 'u-boot-ti/master'Albert ARIBAUD2012-11-03-5/+638
| |\ \
| | * | eco5pk: Add new board and default configRaphael Assenat2012-10-30-0/+81
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Raphael Assenat <raph@8d.com> [trini: Squash boards.cfg / MAINTAINERS change into main patch] Signed-off-by: Tom Rini <trini@ti.com>
| | * | New board support: Nokia RX-51 aka N900Pali Rohár2012-10-30-0/+452
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on previous work by: Alistair Buxton <a.j.buxton@gmail.com> Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Cc: Ивайло Димитров <freemangordon@abv.bg>
| | * | Add power bus message definitions in twl4030.hPali Rohár2012-10-30-0/+98
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * Code copied from linux kernel 3.0.0 from file include/linux/i2c/twl.h * commit 6523b148b44be38d89c2ee9865d34da30d9f5f1c Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
| | * | am335x_evm: Enable use of UART{1,2,3,4,5}Andrew Bradford2012-10-25-5/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add targets of am335x_evm_uart{1,2,3,4,5} to have serial input/output on UART{1,2,3,4,5} for use with the Beaglebone RS232 cape, am335x_evm daughterboard, and other custom configurations. Modify target for am335x_evm to include SERIAL1 and CONS_INDEX=1 options in order to clarify UART selection requirements. Signed-off-by: Andrew Bradford <andrew@bradfordembedded.com>
| * | | tegra: move to common SPL frameworkAllen Martin2012-10-29-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change tegra SPL to use common SPL framework. Any tegra specific initialization is now done in spl_board_init() instead of board_init_f()/board_init_r(). Only one SPL boot target is supported on tegra, which is boot to RAM image. jump_to_image_no_args() must be overridden on tegra so the host CPU can be initialized. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Tested-by: Lucas Stach <dev@lynxeye.de> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: derive CONFIG_SPL_MAX_SIZE instead of hard-coding itStephen Warren2012-10-29-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For Tegra, the SPL and main U-Boot are concatenated together to form a single memory image. Hence, the maximum SPL size is the different in TEXT_BASE for SPL and main U-Boot. Instead of manually calculating SPL_MAX_SIZE based on those two TEXT_BASE, which can lead to errors if one TEXT_BASE is changed without updating SPL_MAX_SIZE, simply perform the calculation automatically. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Allen Martin <amartin@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | tegra: nand: make ONFI detection workLucas Stach2012-10-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the missing bits to the Tegra NAND driver to make ONFI detection work properly. Also add it to the Tegra default config, as it seems to be a reasonable thing to have it available on all boards that use any kind of NAND. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: Seaboard: enable multiple USB portsStephen Warren2012-10-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device tree already contains the required configuration for both the USB1 and USB3 ports. Enable the required configuration options to enable both these ports, which in turn allows the USB1 port to be used. Note that on a true Seaboard, this port is typically used as a device port hosting Tegra's USB recovery protocol. However, on the Springbank derivative, this port is the only external USB port, so we enable it as a host port so that USB peripherals may be used. Enabling this port in U-Boot as a host port doesn't prevent the port from reverting to a device port when the CPU is reset into recovery mode. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: Harmony: enable ULPI USB portStephen Warren2012-10-29-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ULPI port is routed onto pins on the mini PCI Express connector. A standard breakout board may be used to access the port. * Add required DT entries to configure the ULPI port. * Setup up the ULPI pinmux in the board code. * Enable multiple USB controller and ULPI support in the board config. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: use standard variables to define load addressesStephen Warren2012-10-29-3/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently, Tegra's default environment uses non-standard variables to define where boot scripts should load the kernel, FDT, and initrd. This change both changes the variable names to match those described in U-Boot's README, and shuffles their values around a little so that the values make a little more sense; see comments in the patch for rationale behind the values chosen. Note that this patch does remove the old non-standard variable "fdt_load" from the default environment, so this patch requires people to change their boot scripts. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: tegra: define CONFIG_SYS_BOOTMAPSZStephen Warren2012-10-29-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This define indicates the size of the memory region where it is safe to place data passed to the Linux kernel (ATAGs, DTB, initrd). The value needs to be: a) Less than or equal to RAM size. b) Small enough that the area is not within the kernel's highmem region, since the kernel cannot access ATAGs/DTB/initrd from highmem. c) Large enough to hold the kernel+DTB+initrd. 256M seems large enough for (c) in most circumstances, and small enough to satisfy (a) and (b) across any possible Tegra board. Note that the user can override this value via environment variable "bootm_mapsize" if needed. The advantage of defining BOOTMAPSZ is that we no longer need to define variable fdt_high in the default environment. Previously, we defined this to prevent the DTB from being relocated to the very end of RAM, which on most Tegra systems is within highmem, and hence which would cause boot failures. A user can still define this variable themselves if they want the FDT to be either left in-place wherever loaded, or copied to some other specific location. Similarly, there should no longer be a strict requirement for the user to define initrd_high if using an initrd. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | tegra: add Colibri T20 board supportLucas Stach2012-10-29-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds board support for the Toradex Colibri T20 module. Working functions: - SD card boot - USB boot - Network - NAND environment Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | Merge remote-tracking branch 'u-boot-imx/master'Albert ARIBAUD2012-10-27-16/+35
| |\ \ \
| | * | | mx6qarm2: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFERFabio Estevam2012-10-20-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Data cache and CONFIG_MMC_BOUNCE_BUFFER can be safely enabled now. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | mx6qsabre_common: Enable DCACHE and CONFIG_MMC_BOUNCE_BUFFERFabio Estevam2012-10-20-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Data cache and CONFIG_MMC_BOUNCE_BUFFER can be safely enabled now. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | mx25pdk: Use internal RAM for stack pointerFabio Estevam2012-10-20-2/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use internal RAM for stack pointer as it is done in other i.MX boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | mx6qsabrelite: enable DCache and MMC bounce bufferDirk Behme2012-10-17-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The recent U-Boot version 2012.07 has improved drivers (e.g. MMC and network/FEC) regarding DCache handling. So it should be safe to use the DCache on the i.MX6, now. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | | configs: mx53evk: Remove CONFIG_HAS_ETH1Fabio Estevam2012-10-17-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx53evk has only one Ethernet port, so remove CONFIG_HAS_ETH1 option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | configs: mx51evk: Remove CONFIG_HAS_ETH1Fabio Estevam2012-10-17-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx51evk has only one Ethernet port, so remove CONFIG_HAS_ETH1 option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
generated by cgit v1.1 at 2024-12-13 21:01:07 +0000