| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
| |
In Kconfig, the CONFIG_MXC_EPDC depends on CONFIG_LCD.
We can't only set the CONFIG_MXC_EPDC in defconfig and set CONFIG_LCD in header file.
This will cause the both two configs are not selected. So in fact the epdc codes
are not compiled.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
| |
add splash screen feature for epdc.
it's tested on imx6sll arm2 board and evk board.
Signed-off-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit c85c6f2a0f08dfc6c2859fe969b2021ab32b9370)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix below build warning by declaring sata_get_dev the in the part.h
common/env_sata.c: In function 'saveenv':
common/env_sata.c:70:9: warning: implicit declaration of function 'sata_get_dev' [-Wimplicit-function-declaration]
sata = sata_get_dev(env_sata);
^
common/env_sata.c:70:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
sata = sata_get_dev(env_sata);
^
common/env_sata.c: In function 'env_relocate_spec':
common/env_sata.c:116:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
sata = sata_get_dev(env_sata);
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Since the u-boot size increases after using OF_CONTROL to including DTB,
we have to adjust ENV_OFFSET to 896K for SD/eMMC/FLASH/SATA.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
The MX6SL, SLL and ULL have DCP to replace CAAM in SoC. We have to
disable the CAAM driver for them.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Modify the CONFIG_CSF_SIZE to 0x4000 to align with v2016.03. Also remove
the duplicated setting for CSF size.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Add Android support for mx6qarm2 lpddr2 pop target
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
(cherry picked from commit 6356f2b420f3571493755f6b3a307a66a539b60c)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. pass androidboot.storage_type to android, 'init' use it to parse
different init.freescale.storage.rc.
2. store new ptable with gpt partition.
3. we use the last LBA as backup gpt table, there is many warning log
when boot, change print to debug
Change-Id: I84070735e9d4c2741b0e240bc1c61b357dabc5b8
Signed-off-by: Sanshan Zhang <sanshan.zhang@nxp.com>
(cherry picked from commit da0ce2787256a323371641b0764266d386d767a5)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add android features on i.MX7ULP EVK board.
Implement the code to get boot device and the serial number on mx7ulp.
TODO: will add the code which check misc partition after porting BCB.
Change-Id: I9d06fecba303fa4dfdcaf73da1b6246444697bba
Signed-off-by: Sanshan Zhang <sanshan.zhang@nxp.com>
(cherry picked from commit 4c60cba3a017b921aebb84dd1268c898e549c99a)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add board level support for android fastboot feature. Each board has
a android specified header file for defining android related configuraitons.
And add build targets for their android uboot images building.
For mx6qsabreauto, mx6sabresd and mx7dsabresd, we enable the android
fastboot exclusive with DFU.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 43fe988af28c5e51fb23aa846e04bc9698256926)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Integrate the FSL android fastboot features into community's fastboot.
1. Use USB gadget g_dnl driver
2. Integrate the FSL SD/SATA/NAND flash operations, since the GPT and
EFI partitions are not support by i.MX.
3. Add FDT support to community's android image.
4. Add a new boot command "boota" for android image boot. The boota
implements to load ramdisk and fdt to their loading addresses
specified in boot.img header, while bootm won't do it for android image.
5. Support the authentication of boot.img at the "load_addr" for
both SD and NAND.
6. We use new configuration CONFIG_FSL_FASTBOOT for Freescale's fastboot
with relevant header file "fsl_fastboot.h". While disabling the
configuration, the community fastboot is used.
7. Overwrite the cmdline in boot.img by using bootargs saved in local environment.
8. Add recovery and reboot-bootloader support.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 23d63ff185929fff5e392efc853d69b606ba081a)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The i.MX6SL EVK needs this driver in android fastboot support. Add
this driver to u-boot.
To use the driver, user must define:
CONFIG_MXC_KPD Enable the driver
CONFIG_MXC_KEYMAPPING Key mapping matrix
CONFIG_MXC_KPD_COLMAX The column size of key mapping matrix
CONFIG_MXC_KPD_ROWMAX The row size of the key mapping matrix
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 5096e572667ff41217deb4ba9b1bd15e93fa6b59)
|
|
|
|
|
|
|
|
|
|
| |
Add the 10x10 ARM2 and 14x14 ARM2 DTS files. Also convert the board
codes to use OF_CONTROL and DM drivers.
Since the DTS files only have UART and SD1 supported. So we only enable
the DM for these two modules. QSPI and USB are still kept in non-DM fashion.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Copy the mx7ulp ARM2 codes from v2016.03 as the base for using
OF_CONTROL and DM drivers.
The 14x14 ARM2 LPDDR3 script is v1.5:
- IMX7ULP1_LPDDR3_320MHz_512MB_32bit_V1.5.inc
The 10x10 ARM2 LPDDR2 script is v1.1:
- IMX7ULP1_LPDDR2_320MHz_1GB_32bit_V1.1.inc
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Add environment variables for mfgtool.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Add the OCOTP driver and fuse command configurations.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Add board_late_mmc_env_init to support MMC device detection for environment
variables.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
| |
Since we can use USB ethernet instead of local ethernet, add ethernet support
for it. To use USB ethernet function at u-boot, just plug in Micro-AB cable
at USBOTG1 port with USB2Ethernet adapter connected.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
(cherry picked from commit 60ffddf87cf6b8502c5d5fc6540364adfd66ebb3)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Enable and setup board level codes for MIPI DSI splashscreen on EVK board.
User needs set env variable"panel=HX8363_WVGA" for displaying.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 49cb68f5c17e42f9290336e1252ace6ac7d0b5ce)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the host driver base from kernel for MIPI DSI controller on i.MX7ULP.
The controller provides a DPI-2 interface for LCDIF video stream, and a APB interface
for packet transmission.
The driver provides APIs to register a MIPI panel device and its driver. The panel
driver can use the write packet function provided by the host driver to send control
packets to panel device via APB interface.
MIPI DSI has its PHY and dedicated PLL. The driver will setup them when enabling the DSI
host.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit e02115dd1c5d36ec06eabcb5a0b8e09aaf0f29a0)
|
|
|
|
|
|
|
| |
Porting codes to support USB OTG0 on the EVK board. Convert
to use DM USB driver.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
| |
Porting the QSPI flash board support from v2016.03, and convert to use
DM QSPI driver.
Since we need to support QSPI at default in u-boot, change the default
DTS file to qspi enabled DTS.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
| |
Since the SD3.0 kernel driver needs M4 image support, this causes problem to mfgtool.
To decouple the relationship, we modify the FDT file in u-boot to disable
SD3.0 when booting for mfgtool. So the kernel won't depend on M4 image.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Fugang Duan <fugang.duan@nxp.com>
(cherry picked from commit 1826d6e4dc732521190c742f812193be95eea211)
|
|
|
|
|
|
|
|
|
|
|
| |
Enable MMC support.
The fsl sdhc driver needs regulator to enable power, so enable
regulator support.
And bootcmd and more env.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add EVK board support.
Add the evk dts file.
LOG:
U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800)
CPU: Freescale i.MX7ULP rev1.0 at 500 MHz
Reset cause: POR
Boot mode: Dual boot
Model: NXP i.MX7ULP EVK
DRAM: 1 GiB
MMC: FSL_SDHC: 0
In: serial@402D0000
Out: serial@402D0000
Err: serial@402D0000
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
|
|
|
|
|
|
|
|
| |
Add i.MX7ULP dtsi file.
Add clock and pinfun header files.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add i.MX7ULP support.
The buadrate calculation on i.MX7ULP is different,so add a new setbrg
function for i.MX7ULP.
Add a enum lpuart_devtype for runtime check for different platforms.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Shaohui Xie <Shaohui.Xie@nxp.com>
Cc: Alison Wang <b18965@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Add 19x19 LPDDR2/LPDDR3/DDR3 ARM2 board supports.
Enable the OF_CONTROL and convert them to use DM driver. Since the DTB lacks
the support for some modules. We have to use QSPI and FEC with non-DM driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add 12x12 ddr3 arm2 board support and convert it to use OF_CONTROL and
DM drivers.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add mx7d 12x12 lpddr3 arm2 support, which has enabled the OF_CONTROL
and DM drivers
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
1. Add BMODE support
2. Update environment variables to align with v2016.03
3. Remove the wdog WCR bit 4 clear. Since we have implemented reset_cpu for mx7d.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
| |
Add nand/qspi build configurations for their boot support.
Also Add gpmi-nand and qspi specified DTS files for enable them.
For QSPI, this patch changes it to use DM driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add epdc support from v2016.03.
Add a epdc specified DTS file for using epdc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add FEC2 and convert to use FEC DM driver.
Add board rev check.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Switch to use DM USB. Enable GPIO regulator to handle vbus supply.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
|
| |
Enable GPIO/I2C/MMC/SPI/74X164 DM drivers.
Discard mxc spi support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
|
| |
Introduce dts files for i.MX 7D SabreSD platform.
From imx_4.1.y, based on "commit b423f954fb755"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
|
|
|
| |
Modify the mx6qarm2 configurations to enable OF_CONTROL and DM drivers:
USB, Ethernet, UART and MMC.
Add two DTS files for imx6q/dl arm2 board and imx6q pop arm2 board.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6sx 14x14/17x17/19x19 lpddr2/ddr3 arm2 board codes and build
configurations to enable OF_CONTROL and DM drivers.
1. Update GPIO codes for adding gpio request
2. Enable USB DM driver
3. Update PMIC code for using DM PMIC
4. Add spinor/qspi/nand/eimnor boot support.
5. Add defconfig for using plugin.
6. Enable Ethernet DM driver
7. Update for using QSPI DM driver
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Copy the board codes and build configurations for i.MX6SX 14x14/17x17/19x19
ARM2 boards from v2016.03 as the base for converting to OF_CONTROL and
DM driver.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6sll lpddr2/3 arm2 board codes and build configurations
to enable OF_CONTROL and DM drivers.
1. Update GPIO codes for adding gpio request
2. Enable USB DM driver
3. Update PMIC code for using DM PMIC
4. Add spinor boot support, pin conflict with LCD, will disable LCD.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Move the mx6sll lpddr2/3 arm2 board codes and defconfigs from v2016.03
as the base for converting to use DTB OF_CONTROL.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6ull ddr3 arm2 board codes and build configurations
to enable OF_CONTROL and DM drivers.
1. Update QSPI settings and codes for DM QSPI driver.
2. Update GPIO codes for adding gpio request
3. Enable FEC DM driver and update relevant configurations
4. Enable USB DM driver
5. Update PMIC and LDO by-pass codes for DM PMIC
6. Add various boot media support, QSPI/NAND/SPINOR
7. Add rework support for eMMC/QSPIB/TSC
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
| |
Enable the module disable fuse checking configurations, and ENET fuse checking during
ENET setup.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Bai Ping <ping.bai@nxp.com>
(cherry picked from commit d2192a3909be8ab9433082e7c04c917489b28e25)
|
|
|
|
|
|
|
|
| |
add splash screen feature for epdc.
it's tested on imx6ull arm2 board.
Signed-off-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit bcdbe240bb2a97d38ba30dd244a51ece87662b06)
|
|
|
|
|
|
|
| |
Move the mx6ull ddr3 arm2 board codes and defconfigs from v2016.03
as the base for converting to use DTB OF_CONTROL.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6ul ddr3 arm2 and lpddr2 arm2 boards codes and build configurations
to enable OF_CONTROL and DM drivers.
1. Update QSPI settings and codes for DM QSPI driver.
2. Update GPIO codes for adding gpio request
3. Enable FEC DM driver and update relevant configurations
4. Enable USB DM driver
5. Update PMIC and LDO by-pass codes for DM PMIC
6. Add various boot media support, QSPI/NAND/SPINOR/EIMNOR
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Move the mx6ul DDR3/LPDDR2 ARM2 boards codes from v2016.03 u-boot as
the base for OF_CONTROL enabling.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6ulevk board files and build configurations to enable
OF_CONTROL and DM drivers.
1. QSPI settings and codes update for using DM QSPI driver.
For DM and non-DM driver, the AMBA address is not same.
2. Update configurations for DM i2c driver, using CONFIG_SYS_I2C for non-DM driver
3. GPIO update for adding gpio_request
4. Add FEC DM driver support for two FEC controllers.
5. Enable USB DM driver.
6. Enable 74X164 DM driver for 74LV controlling.
7. Enable PMIC DM driver for 9x9 EVK
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6slevk board files and build configurations to enable
OF_CONTROL and DM drivers.
1. Update PMIC and LDO-bypass codes for DM PMIC driver.
2. Update configurations for DM i2c driver
3. GPIO update for adding gpio_request
4. Remove duplicated configurations from build config
Signed-off-by: Ye Li <ye.li@nxp.com>
|