summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* dm: pinctrl: Add a function to parse PIN_CONFIG flagsSimon Glass2016-01-21-0/+13
| | | | | | | | Add a function which produces a flags word from a few common PIN_CONFIG settings. This is useful for simple pinctrl drivers that don't need to worry about drive strength, etc. Signed-off-by: Simon Glass <sjg@chromium.org>
* rockchip: kylin: Store env in emmcJeffy Chen2016-01-21-0/+12
| | | | | | | | There's a 64K reserved area at the end of the first 4M. Store env there, so we can use fastboot to flash it. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* rockchip: kylin: Check fastboot requestJeffy Chen2016-01-21-0/+3
| | | | | | | | | We will save boot mode flag in grf's os_reg[4], if fastboot requested or fastboot key pressed, try to enter fastboot mode at preboot stage. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org>
* rockchip: kylin: Add default gpt partition tableJeffy Chen2016-01-21-0/+29
| | | | | | | | | | Add default android gpt partition table for kylin board. Use "gpt write mmc 0 $partitions" to apply. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Acked-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* dm: clk: Add support for decoding clocks from the device treeSimon Glass2016-01-21-0/+24
| | | | | | | | | Add a method which can locate a clock for a device, given its index. This uses the normal device tree bindings to return the clock device and the first argument which is normally used as a peripheral ID in U-Boot. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge git://git.denx.de/u-boot-dmTom Rini2016-01-21-33/+375
|\
| * dm: video: test: Test that bitmap display works correctlySimon Glass2016-01-20-0/+2
| | | | | | | | | | | | | | | | Add a test for the 'bmp' command. Test both the uncompressed and compressed versions of the file, since they use different code paths. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * dm: video: test: Add tests for the video uclassSimon Glass2016-01-20-0/+8
| | | | | | | | | | | | | | | | | | Add tests that check that the video console is working correcty. Also check that text output produces the expected result. Test coverage includes character output, wrapping and scrolling. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * dm: video: sandbox: Convert sandbox to use driver model for videoSimon Glass2016-01-20-7/+4
| | | | | | | | | | | | | | | | Now that driver model support is available, convert sandbox over to use it. We can remove a few of the special hooks that sandbox currently has. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * sandbox: Move CONFIG_VIDEO_SANDBOX_SDL to KconfigSimon Glass2016-01-20-1/+0
| | | | | | | | | | | | | | | | Move this option to Kconfig. This is quite simple as only sandbox uses the driver. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * dm: common: Add memory reservation for the video uclassSimon Glass2016-01-20-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Before relocation we need to reserve memory for the video driver frame buffers so that they can use this memory when they start up (after relocation). Add a call to the uclass to permit this. The current top and bottom of the region is stored in global_data so that it can be checked post-relocation to ensure enough memory is available. No video device should be probed before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * dm: video: Add a uclass for the text consoleSimon Glass2016-01-20-0/+137
| | | | | | | | | | | | | | | | | | | | | | | | The existing LCD/video interface suffers from conflating the bitmap display with text output on that display. As a result the implementation is more complex than it needs to me. We can support multiple text console drivers. Create a separate uclass to support this, with its own API. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * dm: lcd: Avoid using the lcd.h header file with driver modelSimon Glass2016-01-20-4/+8
| | | | | | | | | | | | | | | | | | The LCD functions and definitions are not used with the driver model video uclass. When all boards are converted over we can remove the file. For now, use #ifdef to omit the contents. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * dm: video: Add a video uclassSimon Glass2016-01-20-6/+163
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot has separate code for LCDs and 'video' devices. Both now use a very similar API thanks to earlier work by Nikita Kiryanov. With the driver- model conversion we should unify these into a single uclass. Unfortunately there are different features supported by each. This implementation provides for a common set of features which should serve most purposes. The intent is to support: - bitmap devices with 8, 16 and 32 bits per pixel - text console wih white on black or vice versa - rotated text console - bitmap display (BMP format) More can be added as additional boards are ported over to use driver model for video. The name 'video' is chosen for the uclass since it is more generic than LCD. Another option would be 'display' but that would introduce a third concept to U-Boot which seems like the wrong approach. The existing LCD and video init functions are not needed now, so this uclass makes no attempt to implement them. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
| * serial: lpuart: Move CONFIG_FSL_LPUART to KconfigBin Meng2016-01-20-5/+0
| | | | | | | | | | | | | | | | | | | | | | LPUART is seen on Freescale VF610 and QorIQ Layerscape devices. Create a Kconfig option and move it to defconfig for all boards that have this serial driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Stefan Agner <stefan.agner@toradex.com> Acked-by: Simon Glass <sjg@chromium.org>
| * arm: ls1021atwr: Convert to driver model and enable serial supportBin Meng2016-01-20-0/+2
| | | | | | | | | | | | | | | | Convert ls1021atwr_nor to driver model support. As a start, enable ns16550 serial port driver. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
| * clk: add API to enable clockMasahiro Yamada2016-01-20-0/+18
| | | | | | | | | | | | | | | | The most basic thing for clock is to enable it, but it is missing in this uclass. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
| * clk: add needed include and declaration to include/clk.hMasahiro Yamada2016-01-20-0/+4
| | | | | | | | | | | | | | | | This header uses ulong, so it needs to include <linux/types.h>. Likewise, "struct udevice" must be declared before it is used. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
| * clk: fix comments in include/clk.hMasahiro Yamada2016-01-20-10/+10
| | | | | | | | | | | | | | | | | | | | The comment about get_periph_rate() is the same as that of set_periph_rate(). I am fixing typos here and there while I am in this file. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Simon Glass <sjg@chromium.org>
| * bzip2: Support compression for sandboxSimon Glass2016-01-20-0/+3
| | | | | | | | | | | | | | | | | | | | | | Add the missing code to allow bzip2 compression to be used. This is useful for sandbox tests. These files are taken from the bzip2 1.0.6 release. The license text is copied to the top of each file as is done with other bzip2 files in U-Boot. The only other change is to squash a compiler warning with nBytes. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com>
| * ti_omap5_common: timer: do not define CONFIG_TIMER for splMugunthan V N2016-01-20-0/+1
| | | | | | | | | | | | | | | | Since OMAP's spl doesn't support DM currently, do not define CONFIG_TIMER for spl build. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * am335x_evm: timer: do not define CONFIG_TIMER for splMugunthan V N2016-01-20-0/+1
| | | | | | | | | | | | | | | | Since OMAP's spl doesn't support DM currently, do not define CONFIG_TIMER for spl build. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * am43xx_evm: timer: do not define CONFIG_TIMER for splMugunthan V N2016-01-20-0/+1
| | | | | | | | | | | | | | | | Since OMAP's spl doesn't support DM currently, do not define CONFIG_TIMER for spl build. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
| * dm: timer: uclass: add timer init in uclass driver to add timer deviceMugunthan V N2016-01-20-0/+9
| | | | | | | | | | | | | | | | | | | | Adding timer init function in timer-uclass driver to create and initialize the timer device on platforms where u-boot,dm-pre-reloc is not used. Since there will be multiple timer devices in the system, adding a tick-timer node in chosen node to know which timer device to be used as tick timer in u-boot. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* | sunxi: Add support for the I2C controller which is part of the PRCMJelle van der Waa2016-01-21-1/+1
|/ | | | | | | | | | | Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl> [hdegoede@redhat.com: Minor cleanups] Signed-off-by: Hans de Goede <hdegoede@redhat.com> applied with fixing 2 checkpatch warnings: WARNING: please, no space before tabs Signed-off-by: Heiko Schocher <hs@denx.de>
* iocon / bamboo: Drop CONFIG_SYS_LONGHELPTom Rini2016-01-20-0/+6
| | | | | | | | | | The iocon and bamboo boards are often on the verge of, or going over, their allowed size limits depending on toolchain used. If we turn off CONFIG_SYS_LONGHELP we can gain approximately 14KiB back. Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Stefan Roese <sr@denx.de> Acked-by: Dirk Eibach <dirk.eibach@gdsys.cc>
* stm32: move stm32 specific code to mach-stm32Vikas Manocha2016-01-20-1/+0
| | | | | | | This patch moves stm32 sources at one place, with this armv7m now contains only generic stuff. Signed-off-by: Vikas Manocha <vikas.manocha@st.com>
* udoo:use load instead of fatloadOscar Curero2016-01-20-3/+3
| | | | | | | That way the FS can also be ext2/3/4 Signed-off-by: Oscar Curero <oscar@naiandei.net> Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
* powerpc/83xx: fix build failureShengzhou Liu2016-01-20-1/+0
| | | | | | | Remove duplicated SDRAM_INTERVAL_BSTOPRE from mpc83xx.h, which has been defined in fsl_ddr_sdram.h Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
* igep00x0: Remove no-op macros from config headerLadislav Michl2016-01-20-5/+0
| | | | | | | | | The patch removes some macros that are not used. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* igep00x0: Fix config header indentationLadislav Michl2016-01-20-3/+3
| | | | | | | | | The patch fixes some indentation style problems in omap3_igep00x0.h file. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* igep00x0: Do not include config_distro_defaults.hLadislav Michl2016-01-20-2/+0
| | | | | | | | | | | File is already included: omap3_igep00x0.h -> ti_omap3_common.h -> ti_armv7_omap.h -> ti_armv7_common.h -> config_distro_defaults.h Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Enric Balletbo Serra <enric.balletbo@collabora.com> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de>
* ti_omap3_common: Do not define CONFIG_SPL_NAND_SUPPORTLadislav Michl2016-01-20-1/+0
| | | | | | | | Symbol is already defined in ti_armv7_common.h which is included via ti_armv7_omap.h Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* mips: pb1x00: move CONFIG_SYS_TEXT_BASE away from config.mkMasahiro Yamada2016-01-20-0/+5
| | | | | | | | | | We can delete board/pb1x00/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* mips: dbau1x00: move CONFIG_SYS_TEXT_BASE away from config.mkMasahiro Yamada2016-01-20-0/+5
| | | | | | | | | | We can delete board/dbau1x00/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* mips: vct: move CONFIG_SYS_TEXT_BASE away from config.mkMasahiro Yamada2016-01-20-0/+1
| | | | | | | | | | We can delete board/micronas/vct/config.mk by moving the define of CONFIG_SYS_TEXT_BASE to somewhere else. Other MIPS boards are still defining it in include/config/${BOARD}.h, so I am following that way here. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* m68k: M54418TWR: drop board/freescale/m54418twr/config.mkMasahiro Yamada2016-01-20-1/+1
| | | | | | | | | | | | | | The board/freescale/m54418twr/config.mk defined TEXT_BASE, which has the same value as CONFIG_SYS_TEXT_BASE. The TEXT_BASE is referenced by two files: - arch/m68k/cpu/mcf5445x/start.S and include/ - include/configs/M54418TWR.h Replace the references with CONFIG_SYS_TEXT_BASE and delete board/freescale/m54418twr/config.mk. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Angelo Dureghello <angelo at sysam.it>
* ARM: uniphier: add bootm_low environmentMasahiro Yamada2016-01-20-3/+6
| | | | | | | | | | | The load address of the kernel can be changed via "kernel_addr_r" environment. The device tree and the initramdisk should be relocated according to the kernel location. The "bootm_low" should be calculated by masking the lower bits (TEXT_OFFSET part) of the "kernel_addr_r" environment value. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* ARM: uniphier: define CONFIG_SYS_BOOTMAPSZMasahiro Yamada2016-01-20-0/+2
| | | | | | | | | | | | | U-Boot relocates the device tree and the initramdisk to the tail of the memory region before booting the kernel. Some UniPhier boards are equipped with a large amount of memory. For those boards, the device tree and the initramdisk are placed out of the the kernel causing a kernel panic. Add CONFIG_SYS_BOOTMAPSZ to prevent them from going too high. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* armv8: cavium: Add an implementation of ATF calling functionsSergey Temerkhanov2016-01-19-0/+117
| | | | | | | | This commit adds functions issuing calls to the product-specific ATF services Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
* armv8: cavium: Add ThunderX 88xx board definitionSergey Temerkhanov2016-01-19-0/+143
| | | | | | | | | This commit adds basic Cavium ThunderX 88xx board definitions and support. Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com> [trini: Drop CONFIG_SYS_GENERIC_BOARD define] Signed-off-by: Tom Rini <trini@konsulko.com>
* armv8: Add psci.h from the Linux kernelSergey Temerkhanov2016-01-19-0/+90
| | | | | | | | | This commit adds the psci.h header file from Linux kernel which contains definitions related to the PSCI interface provided by firmware Signed-off-by: Sergey Temerkhanov <s.temerkhanov@gmail.com> Signed-off-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
* Add more SPDX-License-Identifier tagsTom Rini2016-01-19-204/+25
| | | | | | | | | In a number of places we had wordings of the GPL (or LGPL in a few cases) license text that were split in such a way that it wasn't caught previously. Convert all of these to the correct SPDX-License-Identifier tag. Signed-off-by: Tom Rini <trini@konsulko.com>
* vsprintf.c: Always enable CONFIG_SYS_VSNPRINTFTom Rini2016-01-19-12/+0
| | | | | | | | | | | | | | Enabling this function always removes some class of string saftey issues. The size change here in general is about 400 bytes and this seems a reasonable trade-off. Cc: Peng Fan <peng.fan@nxp.com> Cc: Peter Robinson <pbrobinson@gmail.com> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Adrian Alonso <aalonso@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Tom Rini <trini@konsulko.com>
* MIPS: malta: do not pull in target header files in config.hDaniel Schwierzeck2016-01-16-6/+3
| | | | | | | | | config.h is used in target and host code and therefore should not pull in target header files to avoid compile errors. This change is also required for the MIPS header file sync done in follow-up patches. Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
* Fix GCC format-security errors and convert sprintfs.Ben Whitten2016-01-14-1/+1
| | | | | | | | | | | With format-security errors turned on, GCC picks up the use of sprintf with a format parameter not being a string literal. Simple uses of sprintf are also converted to use strcpy. Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Acked-by: Wolfgang Denk <wd@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com>
* Merge branch 'master' of git://git.denx.de/u-boot-x86Tom Rini2016-01-14-1/+3
|\
| * x86: adjust ramdisk load addressMiao Yan2016-01-13-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | By default, ramdisk load address is defined to 02000000 in env string. When loading bzImage to 01000000 (default address), there's a chance that the ramdisk header would be overwritten by the kernel. Thus increase the gap and make ramdisk load at 04000000 by default and also this patch introduces a new configuration item CONFIG_RAMDISK_ADDR for this purpose Signed-off-by: Miao Yan <yanmiaobest@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
| * fdtdec: Add compatible string for Intel IvyBridge FSPBin Meng2016-01-13-0/+1
| | | | | | | | | | | | | | | | Use "intel,ivybridge-fsp" for Intel IvyBridge FSP compatible string. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | Merge git://www.denx.de/git/u-boot-marvellTom Rini2016-01-14-69/+369
|\ \ | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/Kconfig Signed-off-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-12-19 23:00:23 +0000