summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* MLK-13130: configs: mx6qarm2: android lpddr2 pop supportAdrian Alonso2016-08-26-0/+87
| | | | | | Add Android support for mx6qarm2 lpddr2 pop target Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
* MLK-13129: mx6qarm2: add lvds and hdmi supportAdrian Alonso2016-08-26-1/+28
| | | | | | | | Add video display support for mx6qarm2 target board Enable lvds and hdmi video displays only for mx6qarm2 lpddr2 pop target platform Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* MA-8202 [Android_MX6DL_ARD] Fastboot: Failed to boot system if update ↵zhang sanshan2016-08-19-5/+20
| | | | | | | | | | android_root.img based on NAND boot. 100% For sparse system.img, USB can trasfer system.img through spliting image into two sparse images. For android_root.img, the second part will overwrite the first one. It is a workaround to enlarge CONFIG_USB_FASTBOOT_BUF_SIZE to hold system image whose size is more than 400M. Signed-off-by: zhang sanshan <b51434@freescale.com>
* mmc: update MMC_ERASE argument to match Linux kernel.Eric Nelson2016-08-09-1/+6
| | | | | | | | | | | | | | | | | | | | Table 41 of the JEDEC standard for eMMC says that bit 31 of the command argument is obsolete when issuing the ERASE command (CMD38) on page 115 of this document: http://www.jedec.org/sites/default/files/docs/jesd84-B45.pdf The SD Card Association Physical Layer Simplified Specification also makes no mention of the use of bit 31. https://www.sdcard.org/downloads/pls/part1_410.pdf The Linux kernel distinguishes between secure (bit 31 set) and non-secure erase, and this patch copies the macro names from include/linux/mmc/core.h. Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Eric Nelson <eric@nelint.com> Tested-by: Hector Palacios <hector.palacios@digi.com> (cherry picked from commit 1aa2d074a7acda61eb43e654ced21c139703633c)
* MA-8541 env update will overwrite the uboot binaryChen Guoyin2016-08-09-13/+13
| | | | | | | | The uboot binary for auto 6q board may exceed the 512k The env offset need to be larger thn the uboot binary size Extend the env offset to 768k for all imx6/7 boards Signed-off-by: Chen Guoyin <guoyin.chen@freescale.com>
* MA-7875-4 Support fastboot getvar commandsWang Haoran2016-07-21-0/+18
| | | | | | | | | | | | | | | Support below fastboot getvar commands: o version-baseband o version-bootloader o product o off-mode-charge o variant o battery-voltage o battery-soc-ok o partition-size:<partition name> o partition-type:< partition name> Signed-off-by: Wang Haoran <Haoran.Wang@freescale.com>
* MA-7875-3 Support fastboot lock/unlock in i.MX6ULWang Haoran2016-07-21-0/+10
| | | | | | | | | Enable fastboot lock/unlock for Brillo in i.MX6UL platforms include: o Pico i.MX6UL o EVK i.MX6UL 14x14 Signed-off-by: Wang Haoran <Haoran.Wang@freescale.com>
* MA-7875-2 Support fastboot lock/unlock in i.MX6 platformWang Haoran2016-07-21-0/+45
| | | | | | | | | | | Enable fastboot lock/unlock support for Android in i.MX6 platform include: o i.MX6QP/Q/DL sabresd o i.MX6QP/Q/DL sabreauto (non NAND) o i.MX6SX sabresd o i.MX6SX sabreauto (nan NAND) Signed-off-by: Wang Haoran <Haoran.Wang@freescale.com>
* MA-7875 Enable CAAM for i.MX6Wang Haoran2016-07-21-0/+74
| | | | | | | | | Cherry-pick patch from Renato Frias <b13784@freescale.com> to enable CAAM in U-Boot. Modify the CAAM Keyblob to general memory mode. Signed-off-by: Wang Haoran <Haoran.Wang@freescale.com>
* MLK-12875 imx: mx7d_12x12_ddr3_arm2: enable NET utilitiesPeter Chen2016-06-02-1/+5
| | | | | | | Although the ethernet function is not ready for this board, the USB ethernet is ok, it can use NET utilities like DHCP using USB ethernet. Signed-off-by: Peter Chen <peter.chen@nxp.com>
* MLK-12723 imx: Change the env offset on NAND to 60MYe Li2016-05-05-14/+14
| | | | | | | | | | | | | | | Current environment offset on NAND is 37MB, this will cause a alignment issue when erasing if nand erase block is 2MB. The saveenv is failed. => saveenv Saving Environment to NAND... Erasing NAND... Attempt to erase non block-aligned data Since the max erase block we supported is 4MB, adjust the env offset to 60MB, where is the last 4MB in 64MB reserved area for boot. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12687 mx6ullarm2: Clean up macro usage for pins conflict devicesYe Li2016-04-21-0/+3
| | | | | | | | | | | | | | 1. Bind the macro CONFIG_MX6ULL_DDR3_ARM2_EMMC_REWORK to eMMC 8 bits rework, which conflicts with QSPIA and NAND, that we have to disable them at same time. 2. Bind the macro CONFIG_MX6ULL_DDR3_ARM2_QSPIB_REWORK to QSPI B port rework, which conflicts with SD2 and NAND, that we have to disable them at same time. 3. Fix a typo issue of CONFIG_MX6ULL_DDR3_ARM2_EMMC_REWORK 4. Enable QSPI support for default SD boot case. Signed-off-by: Ye Li <ye.li@nxp.com>
* MA-7633-1 [Android-SD-EMMC] enable BCB partition in androidzhang sanshan2016-04-14-7/+25
| | | | | | | | 1 Add some APIs to operate BCB/command. 2 Add action to check the command of BCB. It can cover the case that power down when do factory-reset\ota in recovery mode. Signed-off-by: zhang sanshan <b51434@freescale.com>
* MLK-12616-11 imx: mx6ull: add mx6ull arm2 board supportPeng Fan2016-04-12-1/+73
| | | | | | | | | | | | Support mx6ull ddr3 arm2 board. DDR script version 1.1. Passed memtester on 3 boards. Take mx6ul 14x14 ddr3 arm2 as reference. Note: LCD/NAND/ECSPI not tested, need hardware rework. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MA-7373 - [brillo]: store slot meta data in a raw partition, no file system.fang hui2016-04-11-7/+9
| | | | | | | | | | | | | | | Partition name change from slotmeta to misc. Read/write raw data on partition misc, not use ext4 file system. Store meta in bootloader_message.slot_suffix, as defined in bootable/recovery/bootloader.h The first 4 bytes of boot_ctl are defined as magic number. Also, modify code to remove warning in drivers/usb/gadget/bootctrl.c warning: implicit declaration of function 'do_read' Signed-off-by: fang hui <b31070@freescale.com>
* MA-7251 - [evk_6ul]: Support boot conctrol for brillofang hui2016-04-11-2/+20
| | | | | | | | | brillo need bootlader support boot control. bootlader can choose which slot(partition) to boot based on it's tactic. The commit support boot control for evk6ul Signed-off-by: fang hui <hui.fang@nxp.com>
* MLK-12483-5 mx6ul: Enable module fuse check EVK board and DDR3 ARM2 boardYe Li2016-03-04-0/+5
| | | | | | | Enable the configurations CONFIG_MODULE_FUSE and CONFIG_OF_SYSTEM_SETUP for module fuse check. And modify board level codes for SD, FEC and EIM. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12442: imx: mx6qarm2: lpddr2 set dram 2 channel fixed modeAdrian Alonso2016-03-04-1/+13
| | | | | | | | | | | | | Setup MMDC in two channel fixed mode Initialize dram banks for two channel fixed mode DRAM bank = 0x00000000 -> start = 0x10000000 -> size = 0x20000000 DRAM bank = 0x00000001 -> start = 0x80000000 -> size = 0x20000000 Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
* MLK-12296 imx: mx7dsabresd: Change default env for M4 boot to TCMYe Li2016-03-04-13/+24
| | | | | | | | | | | | Since the QSPI needs to rework on this board, at default the QSPI is disabled. So bind the M4 QSPI boot with QSPI enabled u-boot image, set default M4 boot to TCM. Need to use TCM m4 image at default. Additional, on SDB there is only one QSPI flash. Considering the A7 QSPI boot case, we have to move M4 image to 1M offset to give enough space for u-boot and env. Signed-off-by: Ye Li <ye.li@nxp.com>
* MA-7455-1 Pico: modify Pico configuration for Brillo.Haoran Wang2016-03-04-1/+7
| | | | | | Modify the picosom to be suit for Brillo configurations. Signed-off-by: Haoran Wang <Haoran.Wang@freescale.com>
* MA-7455 Import picosom boot codesHaoran Wang2016-03-04-0/+383
| | | | | | | | Imported the picosom boot codes and board configs from technexion. Signed-off-by: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Haoran Wang <Haoran.Wang@freescale.com>
* MLK-12195 imx: mx6/7 define CONFIG_SYS_VSNPRINTFPeng Fan2016-03-04-2/+6
| | | | | | | Define CONFIG_SYS_VSNPRINTF to use snprintf, but not sprintf. Coverity ID: 17926. Signed-off-by: Peng Fan <peng.fan@nxp.com>
* net: mdio: Add mdio_free() and mdio_unregister() APIBin Meng2016-03-04-0/+2
| | | | | | | | Currently there is no API to uninitialize mdio. Add two APIs for this. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> (cherry picked from commit cb6baca77bca0ef999203a7ed73bd123e7da062e)
* MLK-12102 mmc: fsl: introduce wp_enablePeng Fan2016-03-04-1/+2
| | | | | | | | | | | | | | | | | Introudce wp_enable. If want to check WPSPL, then in board code, need to set wp_enable to 1. Take i.MX6UL for example, to some boards, they do not use WP singal, so they does not configure USDHC1_WP_SELECT_INPUT, and its default value is 0(GPIO1_IO02). However GPIO1_IO02 is muxed for i2c usage and SION bit set. So USDHC controller can always get wp signal and WPSPL shows write protect and blocks driver continuing. This is not what we want to see, so add wp_enable, and if set to 0, just omit the WPSPL checking and this does not effect normal working of usdhc controller. Suggested-by: Ye.Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
* MLK-12034 imx: mx7dsabresd: Add RevB board supportYe.Li2016-03-04-3/+10
| | | | | | | | | | | | | Since i.MX7D SDB revB board has some HW changes, we have modify the BSP file to support new pinmux. 1. OTG2 PWR pin is changed to GPIO1_IO07. 2. A enet2_en pin is added for isolating enet2 signals with EPDC, we also add support for enet2. 3. pin6 of 74LV output is changed for CSI PWDN. Set output to high to power down it. This patch also tries to get the board id and apply changes according with it. Since current RevB board does not burn GP1 fuse for board id, we have to check the TO rev instead even it is not very exact. Will update this if any new way implemented. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11991 arm: config: change imx7d arm2 nand rootfs mtd partition indexHan Xu2016-03-04-1/+1
| | | | | | | change the imx7d arm2 nand rootfs partition index from 3 to 4 since the weim nor was enabled by default and took the first mtd partition. Signed-off-by: Han Xu <b45815@freescale.com>
* MA-7330-1 change tool chain to gcc4.9 for android kernel and ubootZhang Sanshan2016-03-04-0/+3
| | | | | | | | uboot will fail when loader zImage which is larger than 9M. Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to support uncompressing images larger than 8 MB. Signed-off-by: Zhang Sanshan <b51434@freescale.com>
* MA-7291 - [evk6ul-brillo] - In brillo, need enlarge CONFIG_SYS_BOOTM_LENguoyin.chen2016-03-04-0/+24
| | | | | | | | | | birllo use gcc-4.9 to compile kernel, zImage is large then 8M. set CONFIG_SYS_BOOTM_LEN to 16M Signed-off-by: fang hui <b31070@freescale.com> Conflicts: include/configs/mx6ul_14x14_evk_brillo.h
* Revert "MA-7053 when I add selinux=disable in the cmdline, the board do OTA ↵guoyin.chen2016-03-04-3/+0
| | | | | | | | | | | | update will fail" This reverts commit 24356fe059abbc9eae1b192f7af8a46f204a36f4. Conflicts: common/image-android.c Conflicts: common/image-android.c
* MLK-11837 mfgtool: add dummy fat file to avoid windows popup format dialogFrank Li2015-11-11-0/+9
| | | | | | | | | Windows DeviceIoControl SCSI_PASSTHROUGH is not stable when report media is not ready. Use dummy fat file to workaround this issue and avoid windows popup format dialog. Signed-off-by: Frank Li <Frank.Li@freescale.com>
* MA-7053 when I add selinux=disable in the cmdline, the board do OTA update ↵zhang sanshan2015-11-06-0/+3
| | | | | | | | | | | will fail The ota update script will set selinux label with set_metadata when do nand ota update. The root cause is set_metadata will fail if disable selinux in recovery mode. This patch is a workaround which will enable selinux in recovery mode, even if have disable selinux in commandline. Signed-off-by: zhang sanshan <b51434@freescale.com>
* MLK-11767:imx: Modify the u-boot ENV offset for NAND storageYe.Li2015-10-27-7/+7
| | | | | | | | The current 36M offset will conflict with NAND FCB firmware2 when the nand chip block is 1MB size. This patch change it to 36M + 1M offset, so the redundant u-boot at firmware2 will not be broken. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11706: imx6sx: SabreSD: Expand malloc pool to 32MSandor Yu2015-10-16-1/+1
| | | | | | | | | | | Same issue as ENGR00321137, commit 3695635. GIS module need total 3M+3M+1.5M+1.5M=9M video memory. and sys reserved 16M memory for malloc. When gis module enabled, malloc may failed to allocate memory for other modules, that may cause system hang. Expand malloc pool to 32M. Signed-off-by: Sandor Yu <R01008@freescale.com>
* MLK-11718-3: imx: change the NAND env setting addressHan Xu2015-10-15-8/+8
| | | | | | | | The previous 8M address for NAND env might conflict with other boot parameters as the NAND block size increasing, change it to 36M to avoid it. Signed-off-by: Han Xu <b45815@freescale.com>
* MLK-11718-1: mtd: nand: change the maximum nange page size and oob sizeHan Xu2015-10-15-2/+2
| | | | | | | enlarge the maximum nand page size and oob size to 16k byte and 1280byte. Signed-off-by: Han Xu <b45815@freescale.com>
* MLK-11662-1 imx: mx6ul: Change 14x14 LPDDR2 ARM2 memory size to 256MBYe.Li2015-09-30-1/+9
| | | | | | | The actual memory size is 256MB not 512MB, otherwise it has a wrap problem in memory and will cause memtester failed. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11554 imx: mx6ulevk: Modify the mtest memory end to half of PHYS_SDRAM_SIZEYe.Li2015-09-16-1/+1
| | | | | | | Since the mx6ul 9x9 evk has different DDR size with 14x14 evk, change to use the half of PHYS_SDRAM_SIZE for mtest end. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11548 imx: imx6qp: add SabreSD board supportAnson Huang2015-09-15-1/+4
| | | | | | Add i.MX6QP SabreSD board support. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11528 imx: mx6ul check fuse before init beePeng Fan2015-09-10-0/+3
| | | | | | | | | | | Need to check fuse bit 25 of bank 0 word 4 before initialize bee. The bit: 0 means bee enabled, 1 means bee disabled. If disabled, continuing initialize bee will cause system hang, so need to check this bit before initialize bee. Add macro to enable BEE in header file, default disabled. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11461 imx: imx6ul: enable LDO bypass for 9x9 EVK boardAnson Huang2015-09-01-1/+5
| | | | | | | i.MX6UL-9x9-EVK board has PFUZE3000, so enable LDO bypass support for this board. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11408-2 imx: mx7d: Isolate 26 IP resources to domain 0 for A coreYe.Li2015-08-25-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | In current design, if any peripheral was assigned to both A7 and M4, it will receive ipg_stop or ipg_wait when any of the 2 platforms enter low power mode. We will have a risk that, if A7 enter wait, M4 enter stop, peripheral will have chance to get ipg_stop and ipg_wait asserted same time. There are 26 peripherals impacted by this IC issue: SIM2(sim2/emvsim2) SIM1(sim1/emvsim1) UART1/UART2/UART3/UART4/UART5/UART6/UART7 SAI1/SAI2/SAI3 WDOG1/WDOG2/WDOG3/WDOG4 GPT1/GPT2/GPT3/GPT4 PWM1/PWM2/PWM3/PWM4 ENET1/ENET2 Software Workaround: The solution is set M4 to a different domain with A core. So the peripherals are not shared by them. This way requires the uboot implemented the RDC driver and set the 26 IPs above to domain 0 only. CM4 image will set the M4 to domain 1 only. This patch enables the CONFIG_MXC_RDC for mx7d SABRESD board and ARM2 boards, and setup the 26 IP resources to domain 0. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11388 imx: mx7d: add support for mx7d 19x19 lpddr2 arm2 boardYe.Li2015-08-20-0/+4
| | | | | | | | | | This mx7d 19x19 lpddr2 arm2 board is based on 19x19 lpddr3 arm2 board with DDR changed to 512M LPDDR2. We added DDR script for LPDDR2 and a new u-boot build target: mx7d_19x19_lpddr2_arm2_config LPDDR2 script source: lpddr2_0_1.ds Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11367 imx: mx6ul: Add cma bootargs for 6ul 9x9 boardYe.Li2015-08-17-0/+6
| | | | | | | | | | | Since the i.MX6ul 9x9 evk board only has 256MB LPDDR2, while the CMA size used in kernel configuration is 320MB, so we have to set another value for the 9x9 evk board. This patch sets the cma=96M bootargs to in uboot. So the kernel will overwrite to use the new value. Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11364 imx: mx6ul : Add support for i.MX6UL 9x9 EVK boardYe.Li2015-08-17-1/+14
| | | | | | | | | | | | | | The i.mx6ul 9x9 EVK shares the same base board with 6ul 14x14 EVK with two main changes on CPU board: 1. Change to use pfuze 3000. 2. Use 256MB LPDDR2 memory. This patch uses a macro CONFIG_6UL_9X9_LPDDR2 to distinguish the changes above, basing on 14x14 EVK board level codes. The new build target for the 9x9 EVK: mx6ul_9x9_evk_config Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11281-2 ARM: imx7d: enable plug in mode by default for lpsr modeAnson Huang2015-08-05-0/+1
| | | | | | | | | | As we need to support LPSR mode resume and due to hardware design requirement, DCD can NOT put DRAM exit from retention mode, so only plug in mode can do that to support LPSR mode, so enabled plug in mode by default for imx7d 12x12-lpddr3-arm2 board. Signed-off-by: Anson Huang <b20788@freescale.com>
* MLK-11263-2 video: epdc: move setup_waveform_file to board commonPeng Fan2015-08-03-1/+1
| | | | | | | | | | | Since setup_waveform_file in different boards code have same implementation, move setup_waveform_file to board common code. Also rename it to board_setup_waveform_file This patch also fix a bug when using flush_cache. We should pass 'waveform_buf' to flush_cache, but not a string named 'addr'. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11263-1 video: epdc: support display logo on E-Ink screenPeng Fan2015-08-03-0/+6
| | | | | | | | | | | | | | | | | | | Support draw image on E-ink screen. 1. The image format should be PGM-P5 raw data format. 2. The image should be named epdc_logo.pgm. 3. If no epdc_logo.pgm found in the first partition(FAT), will choose to draw black border on the screen. 4. Default configuration is to draw image at pos (0,0). If 'splashpos' env is set, will choose the pos from 'splashpos'. 5. The image size should not be bigger than screen total pixel size. 6. Implement board_setup_logo_file in board/freescale/common/epdc_setup.c 7. Introudce function prototype for board_setup_logo_file. Note: i.MX7D EPDC supports advanced mode and standard mode. Since current PXP in uboot for i.MX7D not ready, only support standard mode now. advanced and standard mode needs waveform firmware's support. Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
* MLK-11228-3 android: Add "data" partition in fastbootYe.Li2015-07-13-0/+6
| | | | | | | | | Enable fastboot command "fastboot flash data" Custom may need to update data partition in fastboot mode. This patch enable flash data partition in emmc\sd. Signed-off-by: Zhang Sanshan <b51434@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11228-1 android: Integrate community fastboot with FSL i.MX fastbootYe.Li2015-07-13-551/+331
| | | | | | | | | | | | | | | | | | | | | 1. Replace the UDC driver with community's USB gadget d_dnl driver. 2. Integrate the FSL SD/SATA/NAND flash operations, since the GPT and EFI partitions are not support by i.MX. 3. Add FDT support to community's android image. 4. Change the booti command to boota, due to the booti has been used for ARM64 image boot. 5. Modify boota implementation to load ramdisk and fdt to their loading addresses specified in boot.img header, while bootm won't do it for android image. 6. Modify the android image HAB implementation. Authenticate the boot.img on the "load_addr" for both SD and NAND. 7. Enable new configuration CONFIG_FSL_FASTBOOT for Freescale's fastboot with relevant header file "fsl_fastboot.h". While disabling the configuration, the community fastboot is used. 8. Use community's way to combine cmdline in boot.img and u-boot environment, not overwrite the cmdline in boot.img Signed-off-by: Ye.Li <B37916@freescale.com>
* MLK-11227 imx: mx6ul_14x14_lpddr2_arm2 add weimnor defconfigPeng Fan2015-07-09-5/+18
| | | | | | | | | | | | | 1. Add weimnor boot defconfig 2. move CONFIG_FSL_USDHC and CONFIG_VIDEO to board header 3. Add CONFIG_SYS_FLASH_PROTECTION for mx6ul 14x14 lpddr2 arm2 4. correct CONFIG_SYS_FLASH_SECT_SIZE and CONFIG_SYS_MAX_FLASH_SECT 5. Add comments for setup_eimnor, since ENET2_RXER pin conflicts with ENET2. Also eimnor support will disable SD1/SD2, need ENET to boot kernel and nfs using enet. So setup_eimnor should be invoked after setup_fec Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
generated by cgit v1.1 at 2024-11-22 11:20:29 +0000