summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* input: Add ANSI 3.64 escape sequence generation.Hung-Te Lin2012-10-19-0/+2
| | | | | | | | | | | | | | To support Non-ASCII keys (ex, Fn, PgUp/Dn, arrow keys, ...), we need to translate key code into escape sequence. (Updated by sjg@chromium.org to move away from a function to store keycodes, so we can easily record how many were sent. We now need to return this from input_send_keycodes() so we know whether keys were generated.) Signed-off-by: Hung-Te Lin <hungte@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@ti.com>
* input: i8042: Provide feature to disable keyboard before booting kernelLouis Yung-Chieh Lo2012-10-19-0/+13
| | | | | | | | | | | | | | | | The BIOS leaves the keyboard enabled during boot time so that any keystroke would interfere kernel driver initialization. Add a way to disable the keyboard to make sure no scancode will be generated during the boot time. Note that the keyboard will be re-enabled again after the kernel driver is up. This code can be called from the board functions. Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org> Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@ti.com>
* input: Use finer grain udelays while waitng for the i8042 keyboard buffer to ↵Gabe Black2012-10-19-0/+6
| | | | | | | | | | | | | | | | | | | | | empty On x86, the i8042 keyboard controller driver frequently waits for the keyboard input buffer to be empty to make sure the controller has had a chance to process the data it was given. The way the delay loop was structured, if the controller hadn't cleared the corresponding status bit immediately, it would wait 1ms before checking again. If the keyboard responded quickly but not instantly, the driver would still wait a full 1ms when perhaps 1us would have been sufficient. Because udelay is a busy wait anyway, this change decreases the delay between checks to 1us. Also, this change gets rid of a hardcoded 250ms delay. On Stumpy, this saves 100-150ms during boot. Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@ti.com>
* env: cosmetic: Consilidate the default env definitionJoe Hershberger2012-10-19-0/+135
| | | | | | | There used to be a huge structure duplicated 3 times in the source. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@ti.com>
* powerpc: delete Wind River SBC8560/8540 supportPaul Gortmaker2012-10-17-887/+0
| | | | | | | | The sbc8548/60 (both similar, just variations in UART hardware) support has been removed from the linux kernel as of v3.6-rc1~132 so lets also now remove it from the u-boot tree as well. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2012-10-17-2/+6
|\
| * i2c: sh_i2c.c: support I2C2, I2C3 and I2C4Tetsuyuki Kobayashi2012-10-16-1/+4
| | | | | | | | | | | | | | sh_i2c.c support I2C0 and I2C1. This patch extends it to I2C4. Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
| * i2c: sh_i2c.c: adjust for SH73A0Tetsuyuki Kobayashi2012-10-16-1/+1
| | | | | | | | | | | | | | | | Adjust i2c_raw_read() in sh_i2c.c to work for SH73A0. After this patch, "i2c md" and "i2c mw" command on U-Boot work properly on KZM-A9-GT board. Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
| * i2c: sh_i2c.c: support iccl and icch extensionTetsuyuki Kobayashi2012-10-16-0/+1
| | | | | | | | | | | | | | | | R-mobile SoC (at least SH73A0) has extension bits to store 8th bit of iccl and icch. This patch add support for the extentin bits. Acked-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
* | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2012-10-17-28/+202
|\ \
| * | MIPS: qemu_mips.h: cleanup coding style and checkpatch.pl issuesDaniel Schwierzeck2012-10-16-28/+26
| | | | | | | | | | | | Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | MIPS: add board qemu-mips64 supportZhi-zhou Zhang2012-10-16-0/+175
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Both big-endian and little-endian are tested with below commands: Rom version: (Default, Now we config it as rom version) qemu-system-mips64el -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic qemu-system-mips64 -M mips -bios u-boot.bin -cpu MIPS64R2-generic -nographic Ram version: qemu-system-mips64el -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic qemu-system-mips64 -M mips -cpu MIPS64R2-generic -kernel u-boot -nographic Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com> Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
| * | MIPS: qemu_mips: move CONFIG_SYS_TEXT_BASE to qemu-mips.hZhi-zhou Zhang2012-10-16-0/+1
| |/ | | | | | | | | | | | | We define CONFIG_SYS_TEXT_BASE in board's specified header file. So config.mk is useless, then remove it. Signed-off-by: Zhizhou Zhang <etou.zh@gmail.com>
* | change all versions of input_data() and output_data() to global weak aliasesPavel Herrmann2012-10-17-0/+11
| | | | | | | | | | | | | | | | | | | | This changes input_data() and friends from static function to global symbols under weak alias, to enable board specific overrides (and therefore get rid of board-specific code in cmd_ide.c) Also declare ide_bus_offset in the header file, so other files can use ATA_CURR_BASE as well. Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
* | split mpc8xx hooks from cmd_ide.cPavel Herrmann2012-10-17-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | move most of mpc8xx hooks from cmd_ide.c into ide_preinit() and newly created ide_init_postreset() (invoked after calling ide_reset after ide_preinit), some cleanup to make checkpatch happy, enable IDE init hooks in configs of affected boards. confusingly, these hooks are used by more than just mpc8xx-based boards, and therefore are placed in arch/ppc/lib/ note: checkpatch still emits warnings about using volatile Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
* | serial: Implement default_serial_puts()Marek Vasut2012-10-17-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot contains a lot of duplicit implementations of serial_puts() call which just pipes single characters into the port in loop. Implement function that does this behavior into common code, so others can make easy use of it. This function is called default_serial_puts() and it's sole purpose is to call putc() in loop on the whole string passed to it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* | mpc82xx: Remove BMW board portStefan Roese2012-10-17-302/+0
|/ | | | | | | | | | | As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: James F. Dougherty <jfd@broadcom.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Marek Vasut <marex@denx.de>
* Merge branch 'agust@denx.de-next' of git://git.denx.de/u-boot-stagingTom Rini2012-10-15-0/+85
|\
| * bootstage: Add new bootstage IDs for board, LCDSimon Glass2012-10-03-0/+5
| | | | | | | | | | | | Add bootstage IDs for board init and LCD. Signed-off-by: Simon Glass <sjg@chromium.org>
| * bootstage: Add feature to stash/unstash bootstage infoSimon Glass2012-10-03-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | It is useful to be able to write the bootstage information to memory for use by a later utility, or the Linux kernel. Provide a function to do this as well as a function to read bootstage information back and incorporate it into the current table. This also makes it possible for U-Boot to chain to another U-Boot and pass on its bootstage information. Signed-off-by: Simon Glass <sjg@chromium.org>
| * bootstage: Store boot timings in device treeSimon Glass2012-10-02-0/+7
| | | | | | | | | | | | | | | | Add an option, CONFIG_BOOTSTAGE_FDT to pass boot timings to the kernel in the device tree, if available. To use this, you must have CONFIG_OF_LIBFDT defined. Signed-off-by: Simon Glass <sjg@chromium.org>
| * bootstage: Add time accumulation featureSimon Glass2012-10-02-0/+27
| | | | | | | | | | | | | | | | | | | | | | Sometimes we want to add up the amount of time spent in a particular activity when it is happening in a number of discrete chunks. Add bootstage_start() to mark the start of an acitivity and bootstage_accum() to accumulate the time since the last start. Calling these function in pairs results in the accumulated time being collected. Signed-off-by: Simon Glass <sjg@chromium.org>
| * bootstage: Export bootstage_add_record() functionSimon Glass2012-10-02-0/+17
| | | | | | | | | | | | | | This function is not static, but not exported either. Add a prototype in the header file and move the required enum to the header also. Signed-off-by: Simon Glass <sjg@chromium.org>
* | configs: mx6qsabre_common.h: Use default clock definitionsFabio Estevam2012-10-15-2/+0
| | | | | | | | | | | | | | Since commit 50d4a707f0 (mx5/6: Define default SoC input clock frequencies) we can use the default clock values. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx31: Fix PDR0_CSI_PODFBenoît Thébaudeau2012-10-15-5/+5
| | | | | | | | | | | | | | | | | | | | The CSI PODF bit-field used by the previous code for the i.MX31 CCM PDR0 register is actually composed of two bit-fields: one pre-divider and one post-divider. This patch fixes the CCM access macros and the code using them accordingly. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de>
* | mx6qsabreauto: Use ttymxc3 as consoleOtavio Salvador2012-10-15-3/+7
| | | | | | | | | | | | | | | | The mx6qsabreauto console is different than mx6qsabresd so the console configuration is now set in the board file. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* | mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau2012-10-15-21/+0
| | | | | | | | | | | | | | | | | | | | | | Define default SoC input clock frequencies for i.MX5/6 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Jason Liu <r64343@freescale.com> Cc: Matt Sealey <matt@genesi-usa.com> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* | mx6q: Add basic support for mx6qsabreautoFabio Estevam2012-10-15-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | configs: mx6: Add a common config fileFabio Estevam2012-10-15-164/+185
| | | | | | | | | | | | Add a common mx6 config file that can be shared between some mx6 boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | mx6qsabresd: Add Ethernet supportFabio Estevam2012-10-15-2/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6qsabresd has a AR8031 Gigabit PHY. Add support for it. Also increase CONFIG_SYS_MALLOC_LEN so that FEC buffer allocation does not fail. Tested on 1Gbp and 100Mbps networks. Suggested-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* | mx6: Add basic support for mx6qsabresd board.Fabio Estevam2012-10-15-0/+170
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mx6qsabresd is a board based on mx6q SoC with the following features: - 1GB of DDR3 - 1 USB OTG port - 1 HDMI output port - SPI NOR - LVDS panel - Gigabit Ethernet - Camera Connector - eMMC and SD card slot - Audio Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | tegra: enable CONFIG_CMD_PARTStephen Warren2012-10-15-0/+11
| | | | | | | | | | | | | | | | This is extremely likely to be used from the boot.scr that Tegra's default bootcmd locates and executes. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Tegra20: Move some include files to arch-tegra for sharing with Tegra30Tom Warren2012-10-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | The move is pretty straight-forward. ap20.h and tegra20.h were renamed to ap.h and tegra.h. Some files remain in arch-tegra20 but 'include' a file in 'arch-tegra' with #defines & structs that will be common between T20 and T30 HW. HW-specific #defines, etc. stay in the 'arch-tegra20' 'root' file. All boards build OK w/MAKEALL -s tegra20. Checkpatch.pl runs clean. Seaboard works OK. Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Rename Medcom to Medcom-WideThierry Reding2012-10-15-4/+4
| | | | | | | | | | | | | | | | | | | | Medcom is the marketing name for an older, PXA-based version of the same device. In order to avoid confusion, rename the Tegra-based version to the new marketing name. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | input: Allow key ghosting filter to be disabledSimon Glass2012-10-15-1/+4
| | | | | | | | | | | | | | Some keyboards will not need a key ghosting filter, so make this feature optional. Signed-off-by: Simon Glass <sjg@chromium.org>
* | input: Separate out keyboard repeat/delay from initSimon Glass2012-10-15-4/+10
| | | | | | | | | | | | | | | | | | | | | | It is inconvenient to have to specify the keyboard repeat and delay at init time if it is not yet available, so move this into a separate function. Some drivers will want to do this when their keyboard init routine is actually called. Signed-off-by: Simon Glass <sjg@chromium.org>
* | sata.h: Make all sata/ata drivers include <sata.h>Pavel Herrmann2012-10-15-2/+5
| | | | | | | | | | | | | | | | | | | | - block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt not ulong. - We also move the extern of sata_dev_desc into <sata.h> - Remove now duplicate declarations from driver-specific headers. Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
* | ide.h: Make ide_(read|write) match block_dev_desc_t block_(read|write)Tom Rini2012-10-15-2/+2
| | | | | | | | | | | | | | block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt not ulong Signed-off-by: Tom Rini <trini@ti.com>
* | usb.h: Add udc_disconnect prototype to usb.hLukasz Dalek2012-10-15-0/+11
| | | | | | | | | | | | | | PXA25x gadget implements common function usb_disconnect(). This patch adds this function prototype into usb.h for boards using it. Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
* | usb: ulpi: add indicator configuration functionLucas Stach2012-10-15-2/+11
| | | | | | | | | | | | | | | | | | | | | | Allows for easy configuration of the VBUS indicator related ULPI config bits. Also move the external indicator setup from ulpi_set_vbus() to the new function. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* | usb: lowlevel interface change to support multiple controllersLucas Stach2012-10-15-4/+8
| | | | | | | | | | | | | | | | | | | | | | Carry an index in the lowlevel usb functions to make specify the respective usb controller. Also pass through an controller struct from lowlevel_init to the creation of the root usb device of this controller. Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de>
* | ppc4xx: Remove AP1000 board supportStefan Roese2012-10-15-249/+2
| | | | | | | | | | | | | | | | | | As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: James MacAulay <james.macaulay@amirix.com> Acked-by: Marek Vasut <marex@denx.de>
* | ppc4xx: Remove ML2 board supportStefan Roese2012-10-15-257/+0
| | | | | | | | | | | | | | | | | | As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peter De Schrijver <p2@mind.be> Acked-by: Marek Vasut <marex@denx.de>
* | ppc4xx: Remove IOP480 supportStefan Roese2012-10-15-400/+1
| | | | | | | | | | | | | | | | | | | | Since the IOP480 (PPC401/3 variant from PLX) is only used on 2 boards that are not actively maintained, lets remove support for it completely. This way the ppc4xx code will get a bit cleaner. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Marek Vasut <marex@denx.de>
* | serial: Remove CONFIG_SERIAL_MULTI from remaining sourcesMarek Vasut2012-10-15-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | Remove the parts depending either on disabled CONFIG_SERIAL_MULTI or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI is now enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* | serial: Remove CONFIG_SERIAL_MULTI from config filesMarek Vasut2012-10-15-53/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | Remove any notion of CONFIG_SERIAL_MULTI from board config files. Since CONFIG_SERIAL_MULTI is now enabled by default, it is useless to specify this config option in the board config files. Therefore remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* | serial: bfin: Flip the jtag serial console to CONFIG_SERIAL_MULTIMarek Vasut2012-10-15-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework the emulation of serial console via JTAG from simple ad-hoc implementation of serial port routines to CONFIG_SERIAL_MULTI and enable CONFIG_SERIAL_MULTI unconditionally for blackfin. In order for the JTAG serial console to take precedence over all other serial ports available in system, implement override for default_serial_console call returning this JTAG serial console. This brings in a bit of a growth of size, but eventually will allow us to unconditionally enable CONFIG_SERIAL_MULTI throughout the whole U-Boot and maintain only one serial subsystem. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* | serial: zoom2: Remove zoom2 serial prototypes from serial.hMarek Vasut2012-10-15-8/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the prototypes for zoom2_serial_deviceN from serial.h . This can't be done right away, as they are referenced from the zoom2 config file. Therefore, adjust the code so the config file only specifies number of the port. Then, replace the simple return in default_serial_console() with a switch across possible values, which returns the zoom2_serial_deviceN . With such adjustment in place, the exported prototypes in serial.h can be safely removed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* | serial: bfin: Adjust serial_register_bfin_uart()Marek Vasut2012-10-15-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Rename the serial_register_bfin_uart() to bfin_initialize_serial() to be consistent with the rest of the naming. Next, remove it's prototype from serial.h and properly insert it into serial.c as the rest of the serial initialization functions. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* | serial: bfin: Remove the bfin_serialN_device exports from serial.hMarek Vasut2012-10-15-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Remove the exports from serial.h as they are only used in the blackfin serial driver. Furthermore, they are only used for registration, which is handled already inside that driver and default_serial_port() call, which is also handled in that driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-12-19 12:04:38 +0000