summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* mpc83xx: MPC8360ERDK: fix environment offset configuration bugAnatolij Gustschin2009-04-23-2/+2
| | | | | | | | | | | The size of U-Boot binary for MPC8360ERDK increased (> 2 flash sectors now), so 'saveenv' will partially overwrite U-Boot in flash and will brick the board. This patch moves environment offset to fourth flash sector and also fixes CONFIG_SYS_MONITOR_LEN. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* fix DaVinci NS16550_REG_SIZE regressionDavid Brownell2009-04-16-4/+4
| | | | | | | | | | | | | Update the DaVinci DM6446 boards to use the new convention for CONFIG_SYS_NS16550_REG_SIZE ... the size hasn't changed from the original 4 bytes, but these chips are little-endian. (Resolves a regression added recently by the include/ns16550.h patch to "Unify structure declaration for registers". The code previously worked just fine because the registers were accessed as host-endian words, not as bytes.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
* ppc4xx: Disable POST memory test on NAND-booting KilaueaStefan Roese2009-04-16-1/+12
| | | | | | | | | Don't run the memory POST on the NAND-booting version. It will overwrite part of the U-Boot image which is already loaded from NAND to SDRAM. We were just lucky that it booted at all with this SDRAM test enabled. Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Disable POST memory test on NAND-booting SequoiaStefan Roese2009-04-16-2/+13
| | | | | | | | | Don't run the memory POST on the NAND-booting version. It will overwrite part of the U-Boot image which is already loaded from NAND to SDRAM. We were just lucky that it booted at all with this SDRAM test enabled. Signed-off-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2009-04-07-69/+150
|\
| * Blackfin: update anomaly sheetsMike Frysinger2009-04-06-69/+150
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Support for PXA27X UDC.Remy Bohmer2009-04-06-53/+312
| | | | | | | | | | | | | | | | This Patch adds Support for PXA27X UDC. (Rebased to drivers/usb reorganisation) Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* | drivers/usb: regorganisationJean-Christophe PLAGNIOL-VILLARD2009-04-06-39/+0
|/ | | | | | | | | | | | | move to linux usb driver organisation as following drivers/usb/gadget drivers/usb/host drivers/usb/musb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
* Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-04-05-22/+153
|\
| * integratorap: fix PCI supportJean-Christophe PLAGNIOL-VILLARD2009-04-05-2/+2
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * arm: clean cache managementJean-Christophe PLAGNIOL-VILLARD2009-04-05-0/+59
| | | | | | | | | | | | unify arm cache management except for non standard cache as ARM7TDMI Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * arm: update co-processor 15 accessJean-Christophe PLAGNIOL-VILLARD2009-04-05-0/+84
| | | | | | | | | | | | import system.h from linux Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * s3c64xx: fix the wrong gpio offsetMinkyu Kang2009-04-05-3/+3
| | | | | | | | | | | | This patch fix the wrong gpio offset Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Move machine specific code to board at s3c64xx (v2)Kyungmin Park2009-04-05-0/+5
| | | | | | | | | | | | | | | | | | | | Move machine specific code to smdk6400. Some board use OneNAND instead of NAND. Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w. So it's better to use macro instead of hard-coded value. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| * ZOOM1 Remove legacy NAND definesTom Rix2009-04-05-17/+0
| | | | | | | | Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
* | Update CHANGELOG, coding style cleanup.Wolfgang Denk2009-04-05-2/+0
| |
* | MPC8260ADS: Add nfsboot/ramboot to default environment.Scott Wood2009-04-04-0/+42
| | | | | | | | | | | | This brings it in line with other Freescale boards. Signed-off-by: Scott Wood <scottwood@freescale.com>
* | UBI/cfi-mtd: Fix mtd name for multiple chipsAndreas Huber2009-04-04-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | On platforms with multiple NOR chips, currently only the first one can be selected using the "ubi part" command. This patch fixes this problem by using different names for the NOR "mtd devices". It also changes the name of the NOR MTD device from "cfi-mtd" to "norX" (X indexing the device numer) to better match the mtdparts defaults. Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
* | eSPI: add the eSPI register supportMingkai Hu2009-04-04-0/+17
|/ | | | Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-at91Wolfgang Denk2009-04-04-1/+387
|\
| * at91sam9263ek: enable hush and auto complete supportJean-Christophe PLAGNIOL-VILLARD2009-04-04-0/+3
| | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Stelian Pop <stelian@popies.net>
| * at91: move dataflash spi driver to drivers/spiJean-Christophe PLAGNIOL-VILLARD2009-04-04-0/+6
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * at91: move usb driver to drivers/usbJean-Christophe PLAGNIOL-VILLARD2009-04-04-0/+5
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * at91rm9200: move serial shutdown code to serial driversJean-Christophe PLAGNIOL-VILLARD2009-04-04-0/+1
| | | | | | | | | | | | | | introduce serial_exit for this purpose. Use it only when the rm9200 serial driver is active Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * at91rm9200: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-04-04-0/+7
| | | | | | | | | | | | add CONFIG_AT91RM9200_USART to activate the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * Add support for the AT91RM9200EK Board.Ulf Samuelsson2009-04-04-0/+326
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AT91RM9200-EK Evaluation Board supports the AT91RM9200 ARM9-based 32-bit RISC microcontroller and enables real-time code development and evaluation. Here is the chip page on Atmel website: http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507 with - NOR (cfi driver) - DataFlash - USB OHCI - Net - I2C (hard) Signed-off-by: Ulf Samuelsson <ulf@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECTJean-Christophe PLAGNIOL-VILLARD2009-04-04-1/+1
| | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * at91sam9: add watchdog supportJean-Christophe PLAGNIOL-VILLARD2009-04-04-0/+38
| | | | | | | | | | Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2009-04-04-3/+9
|\ \ | |/ |/|
| * fsl_pci: Move prototypes into fsl_pci.h and remove explicit externsKumar Gala2009-04-04-3/+9
| | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.hKumar Gala2009-04-04-0/+0
| | | | | | | | | | | | | | Rename the pci header for FSL HW so we can move some prototypes in there and stop doing explicit externs Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | MPC8260ADS: Define CONFIG_HAS_ETH0.Scott Wood2009-04-04-0/+2
| | | | | | | | | | | | This is required so that the MAC address will be updated in the device tree. Signed-off-by: Scott Wood <scottwood@freescale.com>
* | PQ2FADS: Enable PCI.Scott Wood2009-04-04-4/+13
| | | | | | | | | | | | PCI on PQ2FADS is very similar to PCI on MPC8272ADS. Signed-off-by: Scott Wood <scottwood@freescale.com>
* | rename include/zlib.h to include/u-boot/zlib.hJean-Christophe PLAGNIOL-VILLARD2009-04-04-0/+0
|/ | | | | | | | | Some systems have zlib.h installed in /usr/include/. This isn't the desired file for u-boot code - we want the one in include/zlib.h. This rename will avoid the conflict. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* include/ns16550.h: Unify structure declaration for registersDetlev Zundel2009-04-04-93/+37
| | | | | | | | | | | | | | Instead of special casing the different access patterns, use common code with light macros sprinkled in to accomodate for the different layouts of the register structure. Note that this also changes the types of the registers for the "positively packed (>1)" cases. As the registers truly are unsigned chars, this is surely the Right Thing, but it is a semantic change. Note that for this case depending on the endianness on the bus, we may see a change of behaviour. Signed-off-by: Detlev Zundel <dzu@denx.de>
* Add support for building native win32 toolsPeter Tyser2009-04-04-0/+14
| | | | | | | | | | | | | Add support for compiling the host tools in the tools directory using the MinGW toolchain. This produces executables which can be used on standard Windows computers without requiring cygwin. One must specify the MinGW compiler and strip utilities as if they were the host toolchain in order to build win32 executables, eg: make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* elf.h: Use stdint.h to provide standard typedefs for WIN32Peter Tyser2009-04-04-6/+1
| | | | | | | | The original code provided an incomplete set of typedefs for WIN32 compiles and replicated the standard typedefs that are already provided by stdint.h Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* mflash: Initial mflash supportunsik Kim2009-04-03-0/+65
| | | | | | | | | | | | | | | | | | | | Mflash is fusion memory device mainly targeted consumer eletronic and mobile phone. Internally, it have nand flash and other hardware logics and supports some different operation (ATA, IO, XIP) modes. IO mode is custom mode for the host that doesn't have IDE interface. (Many mobile targeted SoC doesn't have IDE bus) This driver support mflash IO mode. Followings are brief descriptions about IO mode. 1. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) 2. IO mode uses SRAM bus interface. Signed-off-by: unsik Kim <donari75@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2009-04-03-2/+865
|\
| * Blackfin: force all boards to HZ of 1000Mike Frysinger2009-04-02-2/+6
| | | | | | | | | | | | | | Since the Blackfin timer code requires HZ to be 1000, barf on any board that tries to use a different value. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf518f-ezbrd: new board portMike Frysinger2009-04-02-0/+147
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf526-ezbrd: new board portMike Frysinger2009-04-02-0/+190
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf538f-ezkit: new board portMike Frysinger2009-04-02-0/+139
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf527-ezkit: new board portMike Frysinger2009-04-02-0/+172
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf548-ezkit: new board portMike Frysinger2009-04-02-0/+211
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-fdtWolfgang Denk2009-04-03-1/+1
|\ \
| * | libfdt: Fix C++ compile-time cast error on gnu 4.2.1Laurent Gregoire2009-04-01-1/+1
| | | | | | | | | | | | | | | | | | | | | Allow the inclusion of libfdt.h in C++ source. Signed-off-by: Laurent Gregoire <laurent.gregoire@tomtom.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
* | | Rename common ns16550 constants with UART_ prefix to prevent conflictsDetlev Zundel2009-04-03-141/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix problems introduced in commit 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware diagnosis functions for inka4x0] which redefined MSR_RI which is already used on PowerPC systems. Also eliminate redundant definitions in ps2mult.h. More cleanup will be needed for other redundant occurrences though. Signed-off-by: Detlev Zundel <dzu@denx.de>
* | | Add "source" command; prepare removal of "autoscr" commandWolfgang Denk2009-04-03-168/+164
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the doc/feature-removal-schedule.txt, the "autoscr" command will be replaced by the "source" command in approximately 6 months from now. This patch prepares this change and starts a 6 month transition period as follows: - The new "source" command has been added, which implements exactly the same functionlaity as the old "autoscr" command before - The old "autoscr" command name is kept as an alias for compatibility - Command sequences, script files atc. have been adapted to use the new "source" command - Related environment variables ("autoscript", "autoscript_uname") have *not* been adapted yet; these will be renamed resp. removed in a separate patch when the support for the "autoscr" command get's finally dropped. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-04-02-212/+89
|\ \
generated by cgit v1.1 at 2024-12-18 16:33:25 +0000