summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* Fix SICRL setting in SIMPC8313Ron Madrid2010-05-17-1/+2
| | | | | | | This patch sets the SICRL_LBC bits in SICRL to change the function of the associated pins to GPIO functionality. Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2010-05-09-0/+17
|\
| * mpc83xx/mvBLM7: add usb commands and cleanup.Andre Schwarz2010-05-07-0/+6
| | | | | | | | | | | | | | | | | | Add USB commands. Rename autoscript to bootscript. Add automatic bootscript image generation to makefile. Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: Add UPMA configuration to SIMPC8313Ron Madrid2010-05-07-0/+11
| | | | | | | | | | | | | | Added UPM array table, upmconfig, and Local Bus configuration support for SIMPC8313 Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | serial: punt unused serial_addr()Mike Frysinger2010-05-07-1/+0
| | | | | | | | | | | | | | Only one file apparently defines this function, and it merely stubs it out. So if no one is defining/calling it, punt it. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | update include/asm/ gitignore after moveMike Frysinger2010-05-07-2/+0
|/ | | | | | | With the cpu include paths moved, the gitignore paths need updating. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Tom Rix <tom@bumblecow.com>
* compiler.h: add uint typedefMike Frysinger2010-05-06-0/+1
| | | | | | | | | Recent crc changes started using the "uint" type in headers that are used on the build system. This subsequently broke mingw targets as they do not provide such a type. So add this basic typedef to compiler.h so that we do not have to worry about this breaking again in the future. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* 74xx_7xx: CPCI750: Add ECC support on esd CPCI-CPU/750 boardReinhard Arlt2010-05-06-1/+3
| | | | | | | | | | Add ECC support for DDR RAM for MV64360 on esd CPCI-CPU/750 board. This patch also adds the "pldver" command to display the CPLD revision. Signed-off-by: Reinhard Arlt <reinhard.arlt@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* eNET: Implement eNET WatchdogGraeme Russ2010-05-06-9/+1
| | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* eNET: Use SC520 MMCR to reset eNET boardGraeme Russ2010-05-06-1/+1
| | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* eNET: Add support for onboard RTL8100B (RTL8139) chipsGraeme Russ2010-05-06-1/+8
| | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* eNET: Fix CONFIG_SYS_HZ to be 1000Graeme Russ2010-05-06-1/+1
| | | | | | | The clock interupt has always been 1kHz as per timer_init() in /arch/i386/cpu/sc520/sc520_timer.c Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* eNET: Fix Flash WriteGraeme Russ2010-05-06-1/+1
| | | | | | Onboard AMD Flash chip does not support buffered writes Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* x86: Fix support for booting bzImageGraeme Russ2010-05-06-0/+1252
| | | | | | | | | | | Add support for newer (up to 2.6.33) kernels Add zboot command which takes the address of a bzImage as its first argument and (optionally) the size of the bzImage as the second argument (the second argument is needed for older kernels which do not include the bzImage size in the header) Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* x86: Use CONFIG_SERIAL_MULTIGraeme Russ2010-05-06-6/+23
| | | | Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* allow print_size to print large numbers on 32-bit systemsTimur Tabi2010-05-05-1/+1
| | | | | | | | | | Modify print_size() so that it can accept numbers larger than 4GB on 32-bit systems. Add support for display terabyte, petabyte, and exabyte sizes. Change the output to use International Electrotechnical Commission binary prefix standard. Signed-off-by: Timur Tabi <timur@freescale.com>
* configs: remove unused CONFIG_COMMAND_HISTORYKim Phillips2010-05-04-3/+0
| | | | | | | | | | | | $ git grep CONFIG_COMMAND_HISTORY CHANGELOG: CONFIG_COMMAND_HISTORY include/configs/AP1000.h:#define CONFIG_COMMAND_HISTORY 1 include/configs/keymile-common.h:#define CONFIG_COMMAND_HISTORY 1 include/configs/manroland/common.h:#define CONFIG_COMMAND_HISTORY 1 $ Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Heiko Schocher <hs@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-netWolfgang Denk2010-05-04-0/+4
|\
| * Program net device MAC addresses after initializingBen Warren2010-05-03-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new function to the eth_device struct for programming a network controller's hardware address. After all network devices have been initialized and the proper MAC address for each has been determined, make a device driver call to program the address into the device. Only device instances with valid unicast addresses will be programmed. Signed-off-by: Ben Warren <biggerbadderben@gmail.com> Acked-by: Detlev Zundel <dzu@denx.de> Tested-by: Prafulla Wadaskar <prafulla@marvell.com> Tested-by: Heiko Schocher <hs@denx.de> Tested-by: Thomas Chou <thomas@wytron.com.tw>
| * net: add altera triple speeds ethernet mac driverThomas Chou2010-05-03-0/+2
| | | | | | | | | | | | | | | | This driver supports the Altera triple speeds 10/100/1000 ethernet mac. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
| * net: add opencore 10/100 ethernet mac driverThomas Chou2010-05-03-0/+1
| | | | | | | | | | | | | | | | This patch ports the opencore 10/100 ethernet mac driver ethoc.c from linux kernel to u-boot. Signed-off-by: Thomas Chou <thomas@wytron.com.tw> Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-05-04-292/+653
|\ \ | |/ |/|
| * pm9263 converted to at91 soc accessAsen Dimov2010-04-30-44/+43
| | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
| * MX31: Add UBI support to QONG moduleStefano Babic2010-04-30-4/+9
| | | | | | | | | | | | The UBI/UBIFS support is added to the QONG module. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * MX31: Add support for NAND to QONG boardStefano Babic2010-04-30-0/+27
| | | | | | | | | | | | | | | | The NAND device is connected to the FPGA of the QONG board and not to the NFC controller. For this reason, the FPGA must be set and initialized before accessing to the NAND itself. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * configs/openrd_base.h: reordered macrosFrans Meulenbroeks2010-04-30-2/+2
| | | | | | | | | | | | | | moved CONFIG_CMD_FAT to filesystem section swapped CONFIG_CMD_NAND and CONFIG_CMD_MII so they are alpha correct Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
| * configs/sheevaplug: added a few additional commandsFrans Meulenbroeks2010-04-30-5/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch includes a few additional commands in the sheevaplug version of u-boot: - support for LONGHELP so you can get help messages - auto completion and command editing - ubi and mii support - ext2 filesystem (convenient if you have an ext2 from which you want to boot) - jffs2 and ubifs filesystems (if you want to use these in NAND) This also makes it more similar to openrd client. Side effect of this patch is that the code now needs 3 sectors i.s.o. 2 so an existing env is overwritten Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
| * Marvell GuruPlug Board SupportSiddarth Gore2010-04-30-0/+198
| | | | | | | | | | | | | | | | | | | | | | | | | | | | GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0 GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot References: http://www.globalscaletechnologies.com/t-guruplugdetails.aspx http://plugcomputer.org This patch is for GuruPlug Plus, but it supports Standard version as well. Signed-off-by: Siddarth Gore <gores@marvell.com>
| * Moved board specific values in config fileStefano Babic2010-04-30-0/+3
| | | | | | | | | | | | | | | | The lowlevel_init file contained some hard-coded values to setup the RAM. These board related values are moved into the board configuration file. Signed-off-by: Stefano Babic <sbabic@denx.de>
| * arm, i.mx27: add support for magnesium board from projectiondesignHeiko Schocher2010-04-30-196/+312
| | | | | | | | | | | | | | | | | | | | | | This patch adds support for the magnesium board from projectiondesign. This board uses i.MX27 SoC and has 8MB NOR flash, 128MB NAND flash, FEC ethernet controller integrated into i.MX27. As this port is based on the imx27lite port, common config options are collected in include/configs/imx27lite-common.h Signed-off-by: Heiko Schocher <hs@denx.de>
| * SAMSUNG: serial: modify name from s5pc1xx to s5pMinkyu Kang2010-04-30-4/+4
| | | | | | | | | | | | | | Because of other s5p series SoC will use these serial functions, modify function's name and structure's name. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * pm9263: remove CONFIG_CMD_AUTOSCRIPTAsen Dimov2010-04-30-1/+0
| | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
| * pm9261: remove CONFIG_CMD_AUTOSCRIPTAsen Dimov2010-04-30-1/+0
| | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
| * pm9261 converted to at91 soc accessAsen Dimov2010-04-30-35/+33
| | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
* | Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/masterWolfgang Denk2010-05-01-0/+309
|\ \
| * | ppc4xx: Fix APC405 build breakageStefan Roese2010-04-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes APC405 build, by defining CONFIG_PPC4XX_I2C. This is needed since the move of the PPC4xx I2C driver into the drivers/i2c directory. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Matthias Fuchs <matthias.fuchs@esd.eu>
| * | ppc4xx: Add support for ICON board (PPC440SPe)Stefan Roese2010-04-29-0/+308
| |/ | | | | | | | | | | | | | | | | | | This patch adds support for the Mosaix Technologies, Inc. ICON board, based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM (512MB standard) and 64MByte of NOR FLASH. Support for the onboard SM502 will be added later. Signed-off-by: Stefan Roese <sr@denx.de>
* | QONG: Adapt flash addresses and mtdparts to grown image sizeWolfgang Denk2010-04-28-5/+9
|/ | | | | | Also enable HUSH shell. Signed-off-by: Wolfgang Denk <wd@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2010-04-28-0/+11
|\
| * MX31: Added LCD support for QONG moduleStefano Babic2010-04-27-0/+11
| | | | | | | | | | | | | | Added support for LCD and splash image to the QONG module. The supported display is VBEST-VGG322403. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2010-04-28-28/+58
|\ \ | |/ |/|
| * mpc83xx: turn on icache in core initialization to improve u-boot boot timeKim Phillips2010-04-22-25/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | before, MPC8349ITX boots u-boot in 4.3sec: column1 is elapsed time since first message column2 is elapsed time since previous message column3 is the message 0.000 0.000: U-Boot 2010.03-00126-gfd4e49c (Apr 11 2010 - 17:25:29) MPC83XX 0.000 0.000: 0.000 0.000: Reset Status: 0.000 0.000: 0.032 0.032: CPU: e300c1, MPC8349E, Rev: 1.1 at 533.333 MHz, CSB: 266.667 MHz 0.032 0.000: Board: Freescale MPC8349E-mITX 0.032 0.000: UPMA: Configured for compact flash 0.032 0.000: I2C: ready 0.061 0.028: DRAM: 256 MB (DDR1, 64-bit, ECC off, 266.667 MHz) 1.516 1.456: FLASH: 16 MB 2.641 1.125: PCI: Bus Dev VenId DevId Class Int 2.652 0.011: 00 10 1095 3114 0180 00 2.652 0.000: PCI: Bus Dev VenId DevId Class Int 2.652 0.000: In: serial 2.652 0.000: Out: serial 2.652 0.000: Err: serial 2.682 0.030: Board revision: 1.0 (PCF8475A) 3.080 0.398: Net: TSEC1: No support for PHY id ffffffff; assuming generic 3.080 0.000: TSEC0, TSEC1 4.300 1.219: IDE: Bus 0: .** Timeout ** after, MPC8349ITX boots u-boot in 3.0sec: 0.010 0.010: U-Boot 2010.03-00127-g4b468cc-dirty (Apr 11 2010 - 17:47:29) MPC83XX 0.010 0.000: 0.010 0.000: Reset Status: 0.010 0.000: 0.017 0.007: CPU: e300c1, MPC8349E, Rev: 1.1 at 533.333 MHz, CSB: 266.667 MHz 0.017 0.000: Board: Freescale MPC8349E-mITX 0.038 0.020: UPMA: Configured for compact flash 0.038 0.000: I2C: ready 0.038 0.000: DRAM: 256 MB (DDR1, 64-bit, ECC off, 266.667 MHz) 0.260 0.222: FLASH: 16 MB 1.390 1.130: PCI: Bus Dev VenId DevId Class Int 1.390 0.000: 00 10 1095 3114 0180 00 1.390 0.000: PCI: Bus Dev VenId DevId Class Int 1.400 0.010: In: serial 1.400 0.000: Out: serial 1.400 0.000: Err: serial 1.400 0.000: Board revision: 1.0 (PCF8475A) 1.832 0.432: Net: TSEC1: No support for PHY id ffffffff; assuming generic 1.832 0.000: TSEC0, TSEC1 3.038 1.205: IDE: Bus 0: .** Timeout ** also tested on these boards (albeit with a less accurate boottime measurement method): seconds: before after 8349MDS ~2.6 ~2.2 8360MDS ~2.8 ~2.6 8313RDB ~2.5 ~2.3 #nand boot 837xRDB ~3.1 ~2.3 also tested on an 8323ERDB. v2: also remove the delayed icache enablement assumption in arch ppc's board.c, and add a CONFIG_MPC83xx define in the ITX config file for consistency (even though it was already being defined in 83xx' config.mk). Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * mpc83xx: enable command line autocompletionKim Phillips2010-04-22-3/+17
| | | | | | | | | | | | because it's convenient. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxxWolfgang Denk2010-04-27-0/+563
|\ \
| * | mpc5121: pdm360ng: add coprocessor POSTAnatolij Gustschin2010-04-24-0/+6
| | | | | | | | | | | | | | | | | | Adds coprocessor communication POST code Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: add support for PDM360NG boardAnatolij Gustschin2010-04-24-0/+534
| | | | | | | | | | | | | | | | | | | | | | | | PDM360NG is a MPC5121E based board by ifm ecomatic gmbh. Signed-off-by: Michael Weiss <michael.weiss@ifm.com> Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: determine RAM size using get_ram_size()Anatolij Gustschin2010-04-24-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Configure CONFIG_SYS_MAX_RAM_SIZE address range in DDR Local Access Window and determine the RAM size. Fix DDR LAW afterwards using detected RAM size. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc512x: make MEM IO Control configuration a board config optionAnatolij Gustschin2010-04-24-0/+6
| | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc5121: add PSC serial communication routinesAnatolij Gustschin2010-04-24-0/+7
| | | | | | | | | | | | Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | mpc512x: add multi serial PSC supportAnatolij Gustschin2010-04-24-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Extend mpc512x serial driver to support multiple PSC ports. Subsequent patches for PDM360NG board support make use of this functionality by defining CONFIG_SERIAL_MULTI in the board config file. Additionally the used PSC devices are specified by defining e.g. CONFIG_SYS_PSC1, CONFIG_SYS_PSC4 and CONFIG_SYS_PSC6. Support for PSC devices other than 1, 3, 4 and 6 is not added by this patch because these aren't used currently. In the future it can be easily added using DECLARE_PSC_SERIAL_FUNCTIONS(N) and INIT_PSC_SERIAL_STRUCTURE(N) macros in cpu/mpc512x/serial.c. Additionally you have to add code for registering added devices in serial_initialize() in common/serial.c. Signed-off-by: Anatolij Gustschin <agust@denx.de>
generated by cgit v1.1 at 2024-12-29 07:04:18 +0000