summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* ENGR00242042 MX6DQ/DL: fix boot fail issue on mx6dl boardsjb4.2.1_1.0.0-alphaLin Fuzhen2013-01-28-1/+2
| | | | | | | | MX6DQ and MX6DL share the common board file, but only MX6DQ has built-in SATA, for the SATA PDDQ should be enabled default, so it needs to add code to distinguish different chip ID. Signed-off-by: Lin Fuzhen <fuzhen.lin@freescale.com>
* ENGR00240261 support fastboot for nand boot in sabreauto_androidb022472013-01-16-0/+6
| | | | | | Add partition table for nand boot. Signed-off-by: b02247 <b02247@freescale.com>
* ENGR00239610: Enhance the quick fastboot stabilityLiGang2013-01-11-2/+0
| | | | | | | 1. Correct oversight of setup and endpoint complete irq handler sequence 2. Add check to string descriptor index Signed-off-by: LiGang <b41990@freescale.com>
* ENGR00239607 add nand config for android sabreautob022472013-01-10-6/+395
| | | | | | Add nand config for android sabreauto Signed-off-by: b02247 <b02247@freescale.com>
* ENGR00239366: Add support for nand storage in quick fastbootLiGang2013-01-09-1/+1
| | | | | | | 1. Add more check before writing image to storage 2. Fix failure when using nand storagea Signed-off-by: LiGang <b41990@freescale.com>
* ENGR00238363: mx6dl: epdc: remove epdc macro redefinition in config fileFugang Duan2013-01-08-4/+0
| | | | | | | Remove mx6dl_arm2 and mx6dl_sabresd config file epdc macro redefinition to avoid build warning. Signed-off-by: Fugang Duan <B38611@freescale.com>
* ENGR00238834: mx6solo: add MFG support for mx6solo sabresd boardJason Liu2013-01-04-0/+303
| | | | | | add MFG support for mx6solo sabresd board Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00238371: mx6solo: sabresd: make system prompt indicate solo configJason Liu2012-12-27-1/+1
| | | | | | | make system prompt indicate solo config when using mx6solo_sabresd: "MX6Solo SABRESD U-Boot > " Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00238300: enhance the download speed for fastbootLiGang2012-12-27-0/+77
| | | | | | | | | | 1. the new fastboot is an add-on feature, the original fastboot is reserved 2. the new fastboot is a subset of original fastboot, only support "download" and "flash" command 3. type "fastboot" in uboot to launch the original fastboot utility, type "fastboot q" in uboot to launch the new fastboot utility Signed-off-by: LiGang <b41990@freescale.com>
* ENGR00238048: Add support for processor serial ATAG in uboot for iMX53Nitin Garg2012-12-21-0/+3
| | | | | | | Add support for Processor UID ATAG in uboot for iMX53. The UID is present in Fuses bank 0 at offset 0x20. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00235540 add sabreauto_6q config for androidb022472012-12-18-0/+78
| | | | | | Support fastboot and recovery Signed-off-by: b02247 <b02247@freescale.com>
* ENGR00236620: Add Android fastboot and recovery reboot supportNitin Garg2012-12-11-8/+5
| | | | | | | Add support for Android fastboot and recovery reboot commands for iMX5. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00235817 mx6: use SNVS LPGPR register to store boot mode value.Zhang Jiejing2012-12-11-0/+2
| | | | | | | | | | | | | | | | | After using POR reset, the content in SRC will be reset. See RM: 63.5.1.2.3 IPP_RESET_B(POR) Because POR reset will reset most of register in IC, so use SNVS_LP General Purpose Register (LPGPR) to store the boot mode value. Below copy from SNVS_BlockGuide.pdf: The SNVS_LP General Purpose Register provides a 32 bit read write register, which can be used by any application for retaining 32 bit data during a power-down mode This Patch will use [7,8] bits of this register. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00223037 fsl: Add new board HDMI dongle for imx6 Q/DL.Zhang Xiaodong2012-11-28-0/+2836
| | | | | | Add HDMIdongle board for imx6Q/DL under board/freescale. Signed-off-by: Zhang Xiaodong <B39117@freescale.com>
* ENGR00233168 - U-Boot fails to boot from eMMCOliver Brown2012-11-27-1/+1
| | | | | | Aligning the flash header to remove the boot plugin as in previous release. Signed-off-by: Oliver Brown <oliver.brown@freescale.com>
* ENGR00234353-2: mx6q_sabreauto_weimnor fix redundant env offsetAdrian Alonso2012-11-20-6/+9
| | | | | | | | | | | | | | | | | | | | * Fix redundant enviroment offset * Disable I2C support as they share pads * Enable flash empty information * weim-nor partition layout +-----------------+ 0x08000000 + u-boot + +-----------------+ 0x08040000 (256k) + u-boot env + +-----------------+ 0x08060000 (128k) + u-boot redundat + +-----------------+ 0x08080000 (128k) + Kernel + +-----------------+ 0x08480000 (4M) + Rootfs + +-----------------+ (~27M) Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* ENGR00234353-1: mx6_sabreauto fix weim-nor bootAdrian Alonso2012-11-20-21/+27
| | | | | | | | | | | | | * Fix weim-nor boot failure * Group weim-nor conflict modules If not defined CONFIG_CMD_WEIMNOR enable SPI-NOR and I2C (default) else enable weim-nor * Remove FLASH_SIZE macro, size is query by CFI driver * Enable flash empty information Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* ENGR00233366-5 Anatop PFUZE: move LDO bypass code to kernelRobin Gong2012-11-19-4/+0
| | | | | | | move LDO bypass code and one PFUZE1.0 workaround code to kernel. Remove CONFIG_MX6_INTER_LDO_BYPASS in u-boot Signed-off-by: Robin Gong <b38343@freescale.com>
* ENGR00233716-1: mx6q_sabreauto aling spi-nor environment offssetAdrian Alonso2012-11-15-12/+12
| | | | | | | | | | | | | | | * Aling spi-nor environment offsset to 256k this allows a partition layout +-----------------+ 0x0 + bootloader + +-----------------+ 0x40000 (256k) + boot env + +-----------------+ 0x42000 (8k) + kernel + +-----------------+ Remaining space (~3.7M) Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* ENGR00233307 Need secure/encrypted boot for Widevine support.Dan Douglass2012-11-12-9/+9
| | | | | | | | | | | | | | | | | | | | * Adding the config option CONFIG_SECURE_BOOT to the SabreSD board, but defaulting it to be disabled. Removed the CONFIG_SECURE_BOOT key from mx6q_arm2_android.h so that it is only in one file, include/configs/mx6q_arm2.h * Fixed up an address alignment check in authenticate_image(). The test would fail in the event the address is already aligned. Also, added some debug code which can be enabled to assist in testing secure images. * Added support for authenticating an image when using booti. * Adding support for secure boot to the Sabre SD board. * Added support for encrypted boot to mx6q arm2 board linker script. Signed-off-by: Dan Douglass <dan.douglass@freescale.com>
* ENGR002232258 MX6Q-ARM2: add a NAND boot config for ubootHuang Shijie2012-11-02-0/+272
| | | | | | add a new config for NAND boot in the mx6q-arm2 board. Signed-off-by: Huang Shijie <b32955@freescale.com>
* ENGR00231891-2 gpmi: fix the 4k page size limitHuang Shijie2012-10-31-2/+2
| | | | | | | We may use the 8K page nand now. So expand the page size from 4k to 8K. Also expand the oobsize to 1K size. Signed-off-by: Huang Shijie <b32955@freescale.com>
* ENGR00230967 Enable recovery mode by keys when bootLiGang2012-10-30-5/+24
| | | | | | | | | | 1. Add matrix key support 2. Add recovery mode support by pressing power key and volume down key when boot SW10 on MX6SL-EVK board configed as volume down key. SW1 on MX6SL-EVK board configed as power key Signed-off-by: LiGang <b41990@freescale.com>
* ENGR00231155 add enable_wait_mode=off for all the mx6q/dl mfg ubootTony LIU2012-10-25-11/+20
| | | | | | | | | - currently only a work around can be applied, the root cause is not identified yet The workaround is to disable wait mode, so all the mfgtool uboot need to add "enable_wait_mode=off" in the cmd line pass to kernel Signed-off-by: Tony LIU <junjie.liu@freescale.com>
* ENGR00230104 mx6q_sabreauto_nand: fix fec phy addressAdrian Alonso2012-10-18-1/+2
| | | | | | | * Fix FEC Phy address to 1 * Enable micrel phy support, revA compatibility Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* ENGR00230334: Fix the mx53_smd_android configNitin Garg2012-10-18-17/+35
| | | | | | | | Update the u-boot config for mx53 smd android to include the correct boot env, enable boot splash, increase the cmdline buffer, tokens and 1G DDR. Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
* ENGR00229931 Support for Solo configuration on ARD platformAlejandro Sierra2012-10-17-0/+2561
| | | | | | | | | Added support for Solo configuration on ARD platform. This support was replaced by DL configuration, however it was added again to emulate or use Solo chip on ARD platform. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00229711 Add weim-nor argument on uboot config Quad/DLAlejandro Sierra2012-10-16-2/+2
| | | | | | | | Missing argument "weim-nor" on uboot configuration to boot from NOR. Quad/DL Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00229709 Support 2 processors at Linux bootAlejandro Sierra2012-10-16-7/+7
| | | | | | | Remove argument "nosmp" to support dual processor configuration on Linux. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00229817: i.mx6dl/mx6solo_sabresd_config: fix the build issueJason Liu2012-10-16-0/+4
| | | | | | | | | | | This patch fixed the following build issue: mx6q_sabresd.c:1382: undefined reference to `imx_pwm_config' mx6q_sabresd.c:1383: undefined reference to `imx_pwm_enable' And also removed the extra '_' in the config name. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00229456 Support for 64bit DDR configuration for ARDAlejandro Sierra2012-10-12-16/+8
| | | | | | | Added support for 64bit DDR configuration on DL chip. On ARD platform Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00227413 Change configuration file names on AIAlejandro Sierra2012-10-12-0/+0
| | | | | | | Change configuration file names for AI platform. From solo to DL. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00228238 i.mx6/i.mx6dl: sabresd: add solo-ddr32bit supportJason Liu2012-10-11-0/+352
| | | | | | | | This patch adds the solo-ddr32bit config support. The DDR script got from: http://compass.freescale.net/livelink/livelink/227589697/ MX6DL_init_DDR3_400MHz_32bit_For_SD_1.0.inc.txt?func=doc.Fetch&nodeid=227589697 Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00223794 MX6 SabreSD:Enable LVDS panel pwm backlightLiu Ying2012-09-27-0/+8
| | | | | | | | | | | | | This patch enables pwm backlight for LVDS panel and stops using gpio backlight to align with kernel to avoid unstable backlight when booting into kernel, as kernel usually uses pwm backlight instead of gpio backlight. Following items are done to support this: 1) Add PWM1 and PWM2 controller base addresses. 2) Change PIN SD1_DAT3 mux from GPIO to PWM1_PWMO. 3) Set default backlight density to 50%. Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
* ENGR00226048 Fix weim nor for mfg toolAlejandro Sierra2012-09-26-3/+2
| | | | | | | | Weim interface share pins with I2C. A define was declared to enable weim pins and disable I2C when mfg tool is used. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00225691 NAND support on i.MX6Solo ARDAlejandro Sierra2012-09-24-0/+628
| | | | | | | | NAND support on i.MX6Solo ARD. Two files were added. mx6solo_sabreauto_nand.h --> bootloader's image mx6solo_sabreauto_nand_mfg.h --> mfg tool bootloader Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00225486 Support for spi-nor bootAlejandro Sierra2012-09-21-0/+725
| | | | | | | | | | | Support for spi-nor boot with valid "extra_env_settings". It used to be the same as the SD Card boot, however it couldn't read/write the env settings because the CONFIG_FSL_ENV_IN_MMC was set instead of CONFIG_FSL_ENV_IN_SF. Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00224313:i.MX6 general:enable CONFIG_CMD_IMXOTP to fix the build errorimx-android-r13.5-betaimx-android-r13.4-gaEric Sun2012-09-14-0/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | Commit 7942886(ENGR00221503-2 imx6: add cpu serial number support) introduces dependency on "CONFIG_SERIAL_TAG" and "CONFIG_CMD_IMXOTP". On U-boot configuration header files which only defines the first one, build error will be met. --- build error message --- arm_cortexa8/mx6/libmx6.a(generic.o): In function `get_board_serial': arm_cortexa8/mx6/generic.c:1438: undefined reference to `imx_otp_read_one_u32' arm_cortexa8/mx6/generic.c:1439: undefined reference to `imx_otp_read_one_u32' --------------------------- To fix it, add missing "CONFIG_CMD_IMXOTP" macro definition in the config head file. Configs affected are: --------------------------- mx6q_arm2_iram mx6q_sabresd_iram mx6dl_arm2_iram mx6sl_arm2_iram mx6sl_evk_iram Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00224291:i.MX6Q/ARM2-LPDDR2:enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu2012-09-14-0/+11
| | | | | | | | | Need enable CONFIG_CMD_IMXOTP to fix the build error: arm_cortexa8/mx6/generic.c:1438: undefined reference to `imx_otp_read_one_u32' arm_cortexa8/mx6/generic.c:1439: undefined reference to `imx_otp_read_one_u32' Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00224272: MFG:i.mx6q/ARM2 enable CONFIG_CMD_IMXOTP to fix the build errorJason Liu2012-09-14-0/+11
| | | | | | | | | Need enable CONFIG_CMD_IMXOTP to fix the build error: arm_cortexa8/mx6/generic.c:1438: undefined reference to `imx_otp_read_one_u32' arm_cortexa8/mx6/generic.c:1439: undefined reference to `imx_otp_read_one_u32' Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00223788 mx6sl_evk: change boot args to boot from mmc/sdRobby Cai2012-09-13-2/+2
| | | | | | | | | default setting is to boot via nfs. By this way, after mfgtool burned the whole image on EVK, the system will probably not load the Linux kernel if the network is not correctly set or not availabe for it. Change to mmc/sd boot to make sure an entire boot process can be completed, in order to easily verify mfgtool. Signed-off-by: Robby Cai <R63905@freescale.com>
* ENGR00223027 Add support for nand on MFG for IMX6QAlejandro Sierra2012-09-11-2/+303
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for nand flash on IMX6Q. Modifying partitions number and size. mx6q_sabreauto_nand_boot.h --> Modify the size of partitions used to 3. PARTITION 0 (16M) ------------------------------ | | | uboot | | | ------------------------------ PARTITION 1 (16M) ------------------------------ | | | Kernel | | | ------------------------------ PARTITION 2 (128M) ------------------------------ | | | | | Root file system | | | | | ------------------------------ mx6q_sabreauto_mfg_enable_nand.h --> Enable partitions on manufacturing tool Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00222170: Add mx6sl_evk_android_config for mx6sl evk boardLiGang2012-09-06-0/+78
| | | | | | | - mx6sl_evk_android.h is a new file, copied from mx6sl_arm2_android.h - set default sdio port as mmc1 Signed-off-by: LiGang <b41990@freescale.com>
* ENGR00221503-2 imx6: add cpu serial number support.Zhang Jiejing2012-08-31-0/+41
| | | | | | | | add cpu serial number tag, kernel will read this number and put it in /proc/cpuinfo, as 'Serial' part it can be used as a UUID source in software. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00222005 mfgtool can't work on mx6slrel_imx_3.0.35_12.09.02Tony LIU2012-08-30-1/+316
| | | | | | | | - for arm2 board, the I2C module is not defined in mfg config - and a new config file for evk board - change some prompt information Signed-off-by: Tony LIU <junjie.liu@freescale.com>
* ENGR00219316-1: mx6 sabreauto: enable mxc_gpio supportAdrian Alonso2012-08-29-9/+20
| | | | | | | | * Enable mxc_gpio support in order to configure steer logic circuits so attached pads can be used by dedicated IP modules I2C3, SPI-NOR, WEIM-NOR. Signed-off-by: Adrian Alonso <aalonso@freescale.com>
* ENGR00221332: U_BOOT: remove "boot" and "enable" from configs' nameTerry Lv2012-08-24-0/+0
| | | | | | | | | | | | | | | | | | | | | Remove "boot" and "enable" from some configs' name. Affacted configs: mx6q_sabreauto_boot_weimnor mx6q_sabreauto_mfg_enable_weimnor mx6solo_sabreauto_boot_weimnor mx6solo_sabreauto_mfg_enable_weimnor mx6q_sabreauto_mfg_enable_spi-nor mx6solo_sabreauto_mfg_enable_spi-nor mx6q_sabreauto_nand_boot Currently, various u-boot are built in nightlybuild, to make it easier, we naming u-boot binary name and config as <soc_name>_<board_type>_<ddr_type>_<boot_device>. Then it is easier to be parsed, also easier to be maintained in nightlybuild and u-boot git. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00221135: imx6x: clear PowerDown Enable bit of WDOG1_WMCRRobby Cai2012-08-24-0/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | From IC spec: --- The Power down Counter inside WDOG-1 will be enabled out of reset. This counter has a fixed time-out value of 16 seconds, after which it will drive the WDOG-1 signal low. To prevent this, the software must disable this counter by clearing the PDE bit of Watchdog Miscellaneous Control Register (WDOG_WMCR) within 16 seconds of reset de-assertion. Once disabled, this counter cannot be enabled again until the next system reset occurs. This feature is provided to prevent the hanging up of cores after reset, as WDOG-1 is not enabled out of reset. --- NOTE for the last sentence: This feature requires a dedicated WDOG_B pin for it. The fact that changing the IOMUX configuration can alter the WDOG_B functionality (GPIO by default) is not ideal as it defeats the purpose of this feature. But it still takes effect when the muxed pin is configured as WDOG_B within 16 seconds. Clear PDE bit to avoid WDOG_B (aka, WDOG-1) assertion. Tested on MX6SL. May add this for other MX6x. Signed-off-by: Robby Cai <R63905@freescale.com>
* ENGR00221150 Support spi-nor on manufacturing toolimx-android-r13.4-betaAlejandro Sierra2012-08-22-0/+588
| | | | | | | | | | | Two configuration files were included to suppoort spi-nor on the manufacturing tool. Basically these files send the parameter "spi-nor" to the kernel, so the SPI interface can be setup. Files included are: mx6q_sabreauto_mfg_enable_spi-nor.h --> For Quad mx6solo_sabreauto_mfg_enable_spi-nor.h --> For solo Signed-off-by: Alejandro Sierra <b18039@freescale.com>
* ENGR00220824: mx6sl_evk: mmc: only SD1 supports 8bit on evk board.Ryan QIAN2012-08-21-2/+2
| | | | | | - configure SD1 to support 8bit on evk Signed-off-by: Ryan QIAN <b32804@freescale.com>
generated by cgit v1.1 at 2024-12-18 23:28:46 +0000