summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* ENGR00124652 UBOOT: MX53 env fails to load when booting from 2nd slotAnish Trivedi2010-06-24-0/+3
| | | | | | Added dynamic check for which sd slot used for boot Signed-off-by: Anish Trivedi <anish@freescale.com>
* ENGR00123782 Fix boot partition problem for emmcAnish Trivedi2010-06-24-3/+6
| | | | | | Enable boot partition in BOOT_CONFIG byte of EXT_CSD Signed-off-by: Anish Trivedi <anish@freescale.com>
* ENGR00122651: Add dwc_ahsata supportTerry Lv2010-06-24-24/+66
| | | | | | Add dwc_ahsata support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00124391 mx35: update mfg config filePeter Chen2010-06-17-50/+47
| | | | | | | The old config has big env size, and the u-boot.bin will larger than 1MB, the new one will less than 500KB Signed-off-by: Peter Chen <b29397@freescale.com>
* ENGR00123484 mx28:support saving environment into sd1Aisheng.Dong2010-06-08-5/+73
| | | | | | | | | Original uboot did not support sd1 and can only save environment into sd0 even actually you're booting from sd1. This patch adds the capability of saving environment into sd1 when you're booting from sd1. Signed-off-by: Aisheng.Dong <b29396@freescale.com>
* ENGR00123551: Add mx25 splash screen supportTerry Lv2010-05-31-1/+100
| | | | | | | | Add mx25 splash screen support. Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Renato Frias <renato.frias@freescale.com> Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00123641 MX53: Add DDR3 CPU board supportJason Liu2010-05-20-0/+241
| | | | | | | | Add DDR3 CPU board support, DDR3 clock 400Mhz Create one config file for it since the DDR3 init script is much different wtih DDR2. Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00123418: Add peripheral clock setup supportTerry Lv2010-05-14-0/+2
| | | | | | Add peripheral clock setup support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00123278: Support clock operation functionsTerry Lv2010-05-11-0/+48
| | | | | | Support clock operation functions. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00123265 UBOOT:Preserve NAND bad block indicationJason Liu2010-05-07-3/+74
| | | | | | Preserve NAND bad block indication Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00122980: Change default env dev to mmc for bbgTerry Lv2010-04-29-2/+2
| | | | | | | As customer usually mmc to save env data. Change default env device to mmc for bbg. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00122643: Integrate linear PMICTerry Lv2010-04-20-0/+27
| | | | | | Integrate linear PMIC. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00122342: missing mx23 evk machine ID settingTerry Lv2010-04-16-69/+3592
| | | | | | Change stmp378x to mx23evk in u-boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00122395: fix license declaration issue in fsl_esdhc.hrel_imx_2.6.31_10.04.01imx_v2009.08_10.04.01Terry Lv2010-04-12-2/+1
| | | | | | fix license declaration issue in fsl_esdhc.h. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00122030 Mfg Firmware support fot imx25Yan Wang2010-04-07-0/+262
| | | | | | Add mfg firmware support for imx25 Signed-off-by:Yan Wang<r65094@freescale.com>
* ENGR00122217 Missed iomem_valid_addr in updater configrationWallace Wang2010-04-02-0/+14
| | | | | | | 1. Add definition for iomem_valid_addr 2. Add definition for CONFIG_ENV_IS_IN_FLASH Signed-off-by: Wallace Wang <r59996@freescale.com>
* ENGR00122203 UBOOT: Add MX53 ARM2 board supportJason2010-04-01-3/+243
| | | | | | | | Both EVK and ARM2 board using the same machine id. Currently, use system_rev to diff ARM2 board. DDR freq for ARM2 has been set to 400M, but 300M on EVK. Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00122085 MX35 Add Uboot Firmware supportWallace Wang2010-03-31-0/+244
| | | | | | Build Mfg firmware for mx35 3stack Signed-off-by: Wallace Wang <r59996@freescale.com>
* ENGR00119033: System can not find MMC/SD card in SD slot 1Terry Lv2010-03-30-3/+51
| | | | | | | System can not find MMC/SD card in SD slot 1 when booting from Uboot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00122050: mmc can't read data whose size exceeds 32MTerry Lv2010-03-26-2/+3
| | | | | | mmc can't read data whose size exceeds 32M. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121976 UBOOT: some fix for SD/MMC cardJason2010-03-25-2/+11
| | | | | | | | | -Update eSDHC clock setting, -Fix the GPT timer setting, -Fix the boot option pars, -Remove mdelay() function call to improve the performance Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00121832: Some code reconstructure for u-bootTerry Lv2010-03-22-70/+2
| | | | | | | | 1. Remove board specific code in mxc_i2c.c. 2. Remove board specific code in mxc_fec.c. 3. Move imx_spi_nor.h to include/asm-arm. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121731: Add mmu, l1cache, l2cache support for mx53Terry Lv2010-03-19-0/+179
| | | | | | Add mmu, l1cache, l2cache support for mx53. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121202 Add uboot support for MX53Jason2010-03-17-0/+1353
| | | | | | Add uboot support for MX53 Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR000121601: FEC not work in mx28 u-bootTerry Lv2010-03-16-0/+13
| | | | | | FEC not work in mx28 u-boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121379: MX28 U-BOOT enhancementsTerry Lv2010-03-12-627/+157
| | | | | | MX28 U-BOOT enhancements. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121079: Unable to get IP address in ubootTerry Lv2010-03-04-3/+31
| | | | | | | | It was found that the failure is caused by sending DCHP Discover request with empty "Parameter Request List" option. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00120520: Enable MMU for mx51 and mx35Terry Lv2010-03-04-15/+268
| | | | | | | MMU enable code is missed in mx51 and mx35 u-boot. So add these codes. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00121029 Add MX51-BBG Uboot Firmware supportFrank Li2010-02-22-0/+232
| | | | | | Build Mfg firmware for mx51-bbg Signed-off-by: Frank Li <frank.li@freescale.com>
* ENGR00120830: Add eMMC and eSD fast boot supportTerry Lv2010-02-08-32/+27
| | | | | | | Add eMMC and eSD fast boot support. Signed-off-by: Terry Lv <r65388@freescale.com> Signed-off-by: Brian Liu <b14843@freescale.com>
* ENGR00120476: Add fuse support for mx51Terry Lv2010-01-27-1/+79
| | | | | | Add fuse support for mx51. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00120206 iMX28 Enable Ethernet and MMC boot supportrel_imx_2.6.31_10.02.00Frank Li2010-01-25-51/+8312
| | | | | | Enable Ethernet and MMC boot support for imx28-evk Signed-off-by: Frank Li <frank.li@freescale.com>
* ENGR00120202 MX51: enable L2 cacheLily Zhang2010-01-18-6/+2
| | | | | | Enable L2 cache in MX51 for uboot and kernel Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00120207: Change recovery mode combo keysTerry Lv2010-01-18-2/+2
| | | | | | Change recovery mode combo keys. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119894: Read right value in mxc_i2cTerry Lv2010-01-11-4/+20
| | | | | | | The value read from mxc_i2c is not complete. The last byte is lost. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119706: Add esdhcv1 support.Terry Lv2009-12-31-0/+1
| | | | | | Add a new config CONFIG_IMX_ESDHC_V1 for v1 support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119716: MX28 basic support.Terry Lv2009-12-31-0/+627
| | | | | | Add mx28 to u-boot and pass the compiling. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119715: Add multi network support for mx35Terry Lv2009-12-31-1/+3
| | | | | | | | mx35 need to enable both smc911x and FEC. So add CONFIG_ETHPRIME for it. Also, change CONFIG_ETH_PRIME to CONFIG_ETHPRIME. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118739 Correct the board version of MX51 EVKLily Zhang2009-12-27-0/+2
| | | | | | | | | | The SD card in MMC Slot2 can not be detected. This is because the board version of MX51 EVK doesn't keep synchronization with kernel. So the card detect PIN is not configured well. Here Bit 11-Bit 8 in system_rev indicates the board version. The fix is to set Bit 11 -Bit8 as 1 for MX51 EVK board. Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00119660 MX35 UBOOT: Can't boot up on 2k page size nandFred Fan2009-12-25-4/+0
| | | | | | | | 1. Write boot image into nand flash. 2. Switch to external boot mode from nand flash 3. Can not show any message. Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00119526 MX25: Fix mmc read/write failure on mmc ubootrel_imx_2.6.31_09.12.00Sammy He2009-12-21-1/+1
| | | | | | Fix MMC read/write failure due to eSDHC register definition wrong Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00119254: Add mmu header for mx51 build errorTerry Lv2009-12-11-0/+135
| | | | | | Add mmu header for mx51 build error. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119246 Add CONFIG_MXC_NAND config flag in MX25 platformJason2009-12-11-0/+1
| | | | | | Add CONFIG_MXC_NAND config flag in MX25 platform Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00119224: mmu support for mx51 3stack and mx51 bbgTerry Lv2009-12-11-0/+12
| | | | | | mmu support for mx51 3stack and mx51 bbg. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119171: ubifs support for android recovery mode.Terry Lv2009-12-11-73/+143
| | | | | | ubifs support for android recovery mode. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118789 Uboot:Update NAND scan scheme to support new nand typeJason2009-12-08-10/+25
| | | | | | | | Update NAND scan scheme to support new nand type. With this patch uboot can support new NAND flash on mx25/mx35 board while compatible with old NAND on old boards. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00118978: Timer adjustment for all platformsFred Fan2009-12-04-17/+24
| | | | | | | | | In current u-boot design, get_timer_masked is not correct and udelay is not accurate when the time is less than 1000us. Thus we need to use ipg clock source for accurate timer. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118579 Enable MMUrel_imx_2.6.31_09.12.00_RC1Fred Fan2009-11-30-0/+218
| | | | | | | To enable MMU, it is porting from redboot. Enable MMU and enable I/D cache. Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00118816 Fix reboot/reset failure with image on nandSammy He2009-11-26-4/+17
| | | | | | Reset CPLD registers to fix reboot/reset failure issue. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118576 MX25: Support Smc911x ethernetSammy He2009-11-20-22/+97
| | | | | | | 1. Add imx cspi support for cpld access. 2. Add smc911x ethernet support from cpld. Signed-off-by: Sammy He <r62914@freescale.com>
generated by cgit v1.1 at 2024-12-30 20:17:48 +0000