| Commit message (Collapse) | Author | Age | Lines |
... | |
|
|
|
|
|
|
| |
Add board_late_mmc_env_init to support MMC device detection for environment
variables.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
| |
Since we can use USB ethernet instead of local ethernet, add ethernet support
for it. To use USB ethernet function at u-boot, just plug in Micro-AB cable
at USBOTG1 port with USB2Ethernet adapter connected.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
(cherry picked from commit 60ffddf87cf6b8502c5d5fc6540364adfd66ebb3)
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Enable and setup board level codes for MIPI DSI splashscreen on EVK board.
User needs set env variable"panel=HX8363_WVGA" for displaying.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 49cb68f5c17e42f9290336e1252ace6ac7d0b5ce)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add the host driver base from kernel for MIPI DSI controller on i.MX7ULP.
The controller provides a DPI-2 interface for LCDIF video stream, and a APB interface
for packet transmission.
The driver provides APIs to register a MIPI panel device and its driver. The panel
driver can use the write packet function provided by the host driver to send control
packets to panel device via APB interface.
MIPI DSI has its PHY and dedicated PLL. The driver will setup them when enabling the DSI
host.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit e02115dd1c5d36ec06eabcb5a0b8e09aaf0f29a0)
|
|
|
|
|
|
|
| |
Porting codes to support USB OTG0 on the EVK board. Convert
to use DM USB driver.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
| |
Porting the QSPI flash board support from v2016.03, and convert to use
DM QSPI driver.
Since we need to support QSPI at default in u-boot, change the default
DTS file to qspi enabled DTS.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
| |
Since the SD3.0 kernel driver needs M4 image support, this causes problem to mfgtool.
To decouple the relationship, we modify the FDT file in u-boot to disable
SD3.0 when booting for mfgtool. So the kernel won't depend on M4 image.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Fugang Duan <fugang.duan@nxp.com>
(cherry picked from commit 1826d6e4dc732521190c742f812193be95eea211)
|
|
|
|
|
|
|
|
|
|
|
| |
Enable MMC support.
The fsl sdhc driver needs regulator to enable power, so enable
regulator support.
And bootcmd and more env.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add EVK board support.
Add the evk dts file.
LOG:
U-Boot 2017.03-rc2-00038-gab86c1d (Feb 22 2017 - 15:59:58 +0800)
CPU: Freescale i.MX7ULP rev1.0 at 500 MHz
Reset cause: POR
Boot mode: Dual boot
Model: NXP i.MX7ULP EVK
DRAM: 1 GiB
MMC: FSL_SDHC: 0
In: serial@402D0000
Out: serial@402D0000
Err: serial@402D0000
Net: Net Initialization Skipped
No ethernet found.
Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
|
|
|
|
|
|
|
|
| |
Add i.MX7ULP dtsi file.
Add clock and pinfun header files.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add i.MX7ULP support.
The buadrate calculation on i.MX7ULP is different,so add a new setbrg
function for i.MX7ULP.
Add a enum lpuart_devtype for runtime check for different platforms.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Shaohui Xie <Shaohui.Xie@nxp.com>
Cc: Alison Wang <b18965@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Add 19x19 LPDDR2/LPDDR3/DDR3 ARM2 board supports.
Enable the OF_CONTROL and convert them to use DM driver. Since the DTB lacks
the support for some modules. We have to use QSPI and FEC with non-DM driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add 12x12 ddr3 arm2 board support and convert it to use OF_CONTROL and
DM drivers.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add mx7d 12x12 lpddr3 arm2 support, which has enabled the OF_CONTROL
and DM drivers
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
1. Add BMODE support
2. Update environment variables to align with v2016.03
3. Remove the wdog WCR bit 4 clear. Since we have implemented reset_cpu for mx7d.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
| |
Add nand/qspi build configurations for their boot support.
Also Add gpmi-nand and qspi specified DTS files for enable them.
For QSPI, this patch changes it to use DM driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add epdc support from v2016.03.
Add a epdc specified DTS file for using epdc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Add FEC2 and convert to use FEC DM driver.
Add board rev check.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
| |
Switch to use DM USB. Enable GPIO regulator to handle vbus supply.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
|
| |
Enable GPIO/I2C/MMC/SPI/74X164 DM drivers.
Discard mxc spi support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
|
| |
Introduce dts files for i.MX 7D SabreSD platform.
From imx_4.1.y, based on "commit b423f954fb755"
Signed-off-by: Peng Fan <peng.fan@nxp.com>
|
|
|
|
|
|
|
|
|
| |
Modify the mx6qarm2 configurations to enable OF_CONTROL and DM drivers:
USB, Ethernet, UART and MMC.
Add two DTS files for imx6q/dl arm2 board and imx6q pop arm2 board.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6sx 14x14/17x17/19x19 lpddr2/ddr3 arm2 board codes and build
configurations to enable OF_CONTROL and DM drivers.
1. Update GPIO codes for adding gpio request
2. Enable USB DM driver
3. Update PMIC code for using DM PMIC
4. Add spinor/qspi/nand/eimnor boot support.
5. Add defconfig for using plugin.
6. Enable Ethernet DM driver
7. Update for using QSPI DM driver
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
| |
Copy the board codes and build configurations for i.MX6SX 14x14/17x17/19x19
ARM2 boards from v2016.03 as the base for converting to OF_CONTROL and
DM driver.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6sll lpddr2/3 arm2 board codes and build configurations
to enable OF_CONTROL and DM drivers.
1. Update GPIO codes for adding gpio request
2. Enable USB DM driver
3. Update PMIC code for using DM PMIC
4. Add spinor boot support, pin conflict with LCD, will disable LCD.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Move the mx6sll lpddr2/3 arm2 board codes and defconfigs from v2016.03
as the base for converting to use DTB OF_CONTROL.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6ull ddr3 arm2 board codes and build configurations
to enable OF_CONTROL and DM drivers.
1. Update QSPI settings and codes for DM QSPI driver.
2. Update GPIO codes for adding gpio request
3. Enable FEC DM driver and update relevant configurations
4. Enable USB DM driver
5. Update PMIC and LDO by-pass codes for DM PMIC
6. Add various boot media support, QSPI/NAND/SPINOR
7. Add rework support for eMMC/QSPIB/TSC
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
| |
Enable the module disable fuse checking configurations, and ENET fuse checking during
ENET setup.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Bai Ping <ping.bai@nxp.com>
(cherry picked from commit d2192a3909be8ab9433082e7c04c917489b28e25)
|
|
|
|
|
|
|
|
| |
add splash screen feature for epdc.
it's tested on imx6ull arm2 board.
Signed-off-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit bcdbe240bb2a97d38ba30dd244a51ece87662b06)
|
|
|
|
|
|
|
| |
Move the mx6ull ddr3 arm2 board codes and defconfigs from v2016.03
as the base for converting to use DTB OF_CONTROL.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6ul ddr3 arm2 and lpddr2 arm2 boards codes and build configurations
to enable OF_CONTROL and DM drivers.
1. Update QSPI settings and codes for DM QSPI driver.
2. Update GPIO codes for adding gpio request
3. Enable FEC DM driver and update relevant configurations
4. Enable USB DM driver
5. Update PMIC and LDO by-pass codes for DM PMIC
6. Add various boot media support, QSPI/NAND/SPINOR/EIMNOR
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Move the mx6ul DDR3/LPDDR2 ARM2 boards codes from v2016.03 u-boot as
the base for OF_CONTROL enabling.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6ulevk board files and build configurations to enable
OF_CONTROL and DM drivers.
1. QSPI settings and codes update for using DM QSPI driver.
For DM and non-DM driver, the AMBA address is not same.
2. Update configurations for DM i2c driver, using CONFIG_SYS_I2C for non-DM driver
3. GPIO update for adding gpio_request
4. Add FEC DM driver support for two FEC controllers.
5. Enable USB DM driver.
6. Enable 74X164 DM driver for 74LV controlling.
7. Enable PMIC DM driver for 9x9 EVK
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6slevk board files and build configurations to enable
OF_CONTROL and DM drivers.
1. Update PMIC and LDO-bypass codes for DM PMIC driver.
2. Update configurations for DM i2c driver
3. GPIO update for adding gpio_request
4. Remove duplicated configurations from build config
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Update i.MX6SL dtsi file and dt-binding header files.
Add the imx6sl-evk DTS file preparing for using DTB.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Enable FEC, USB and QSPI DM driver in build configuration and update
board file for them.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
| |
Update mx6sxsabresd board files and build configurations to enable
OF_CONTROL and DM drivers.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Update i.MX6SX dtsi file and relevant DTS header files.
Add the imx6sx-sdb DTS files preparing for using DTB.
To support DM QSPI driver
1. Modify the n25q256a flash node's compatible to "spi-flash".
2. Add spi0 and spi1 alias for qspi1 and qspi2.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable OF_CONTROL and DM driver on mx6qsabreauto.
1. Add the imx6qsabreauto relevant DTS file for using DTB.
2. Modify PMIC initialization codes to use DM PMIC driver.
3. Modify to use PCA953X DM driver
4. Remove NAND from default, since the default imx6q-sabreauto.dts disabled
the nand. The pins are conflicted with UART3, while UART3 is enabled.
5. For NAND build configuration, remove the USB, since the imx6q-sabreauto-gpmi-weim.dts
will have pin conflicts on steer logic.
6. GPIO requests added.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update mx6ull evk to add features from v2016.03.
1. Add support for NAND flash.
2. Add support for QSPI DM driver.
3. Add USB DM driver support.
4. Add two FEC support by using DM FEC driver
5. Update environments for various boot devices support: SD/NAND/eMMC/QSPI
6. Add MFGtool environments.
7. Add board codes for 9x9 EVK board
For the DTS file, some changes are needed for using QSPI DM driver
1. Add spi0 alias for qspi node. Which is used for bus number 0.
2. Modify the n25q256a@0 compatible property to "spi-flash".
3. Modify spi4 (gpio_spi) node to spi5
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
| |
Update mx6sll EVK board codes for features:
1. Add SD/MMC dynamical device detect.
2. Add wdog set for kernel.
3. Add mfgtool environments.
4. Modify SD/MMC environment offset.
Signed-off-by: Ye Li <ye.li@nxp.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Current environment offset on NAND is 37MB, this will cause a alignment
issue when erasing if nand erase block is 2MB. The saveenv is failed.
=> saveenv
Saving Environment to NAND...
Erasing NAND...
Attempt to erase non block-aligned data
Since the max erase block we supported is 4MB, adjust the env offset to 60MB,
where is the last 4MB in 64MB reserved area for boot.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 22f6c4b151fbdea1985403086715de841152c880)
|
|
|
|
|
|
|
|
| |
Define CONFIG_MX6QP which will also set CONFIG_MX6Q, otherwise
plugin code will use wrong ddr script.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 901d9eb01736ab54822678a197fe1aeb281a81b9)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Setup MMDC in two channel fixed mode
Initialize dram banks for two channel fixed mode
DRAM bank = 0x00000000
-> start = 0x10000000
-> size = 0x20000000
DRAM bank = 0x00000001
-> start = 0x80000000
-> size = 0x20000000
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
(cherry picked from commit bf1d8faf1dab7c4245ba7b79ceef6279cff45625)
|
|
|
|
|
|
|
|
|
| |
Set the CONFIG_SUPPORT_EMMC_BOOT in mx6_common.h to enable the eMMC
boot support for all mx6 platforms. Remove the duplicated definition
in board's header file.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit dbe744de73c88f14e01f56a3258752ab5cd45b14)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is a demo that CM4 will boot up by u-boot without typing any
command. It boots up at u-boot early init, try to minimize the time
from power up to the CM4 running.
Since CM4 runs on QSPI NOR XIP, we have to disable the QSPI driver in
u-boot to avoid conflict.
RDC for shared GPIO1 is added, but not enabled, because the kernel is
not ready for shared GPIO1. Users can uncomment the CONFIG_IMX_RDC to
enable it.
Some legacy codes in mx6sxsabreauto are removed. We only need this work
on mx6sxsabresd as a demo.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit f66842f79d4e33ace45762466eed23a86d367642)
|
|
|
|
|
|
|
|
|
|
| |
Add support for various boot devices like NAND, QSPINOR, SPINOR,
eMMC, EIMNOR, SATA.
Modify board level files to support the feature and add corresponding defconfig files
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 72c35e80b86f7f75a52db45959793882bb730793)
|
|
|
|
|
|
|
|
|
|
|
|
| |
CONFIG_SECURE_BOOT is used for signed image building, this configuration is
not enabled at default. Comment it in mx6/mx7 common header file. Users can
uncomment it to enable.
Also add CONFIG_CSF_SIZE for defining the CSF reserved size and resize
the CONFIG_CSF_SIZE to 0x4000 to align with v2016.03.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 01cc7d9bc205251c13712418d51f3a4d7b20861b)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Port LDO bypass support from v2015 to support the features:
1. Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz,
enable LDO bypass and setup PMIC voltages. LDO bypass is dependent
on the flatten device tree file.
2. We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now
on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to
reboot whole board, so split these code to independent function so that board file
can call it freely.
Signed-off-by: Ye Li <ye.li@nxp.com>
(cherry picked from commit 5b87d04dba66fa45375d59648838ef89f559f75d)
|
|
|
|
|
|
|
|
|
|
|
|
| |
Align with imx_v2016.03
1. Update pmic settings to enable SD3 power and use PMIC common init codes.
2. Enable bmode.
3. Update MMC root parameters
4. Update AUXBOOT for M4
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 0816a496fbe3f7d0e4f1a9322c76908a5c557c8c)
Signed-off-by: Ye Li <ye.li@nxp.com>
|