summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* arm: imx6ul: Add Engicam GEAM6UL Starter Kit initial supportJagan Teki2016-12-16-0/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Boot Log: -------- U-Boot SPL 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30) Trying to boot from MMC1 U-Boot 2016.11-rc2-00144-g922adaa-dirty (Oct 28 2016 - 18:55:30 +0530) CPU: Freescale i.MX6UL rev1.1 528 MHz (running at 396 MHz) CPU: Industrial temperature grade (-40C to 105C) at 43C Reset cause: POR Model: Engicam GEAM6UL DRAM: 128 MiB MMC: FSL_SDHC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 geam6ul> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* arm: dts: Add devicetree for i.MX6ULJagan Teki2016-12-16-0/+1
| | | | | | | | | | | | | Add i.MX6UL dtsi support from Linux. Here is the last commit: "ARM: dts: add gpio-ranges property to iMX GPIO controllers" (sha1: bb728d662bed0fe91b152550e640cb3f6caa972c) Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* imx6: icorem6: Add custom splashscreen supportJagan Teki2016-12-16-0/+2
| | | | | | | | | | | Add custom splashscreen, engicam.bmp support for Engicam i.CoreM6 qdl board. Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* imx6: icorem6: Add framebuffer supportJagan Teki2016-12-16-0/+12
| | | | | | | | | | Add IPUv3 framebuffer support for Engicam i.CoreM6 qdl board. Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Matteo Lisi <matteo.lisi@engicam.com> Cc: Michael Trimarchi <michael@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
* arm: imx: add i.MX53 Beckhoff CX9020 Embedded PCPatrick Bruenn2016-12-16-0/+417
| | | | | | | | | | | | | | | | Add CX9020 board based on mx53loco. Add simplified imx53 base device tree from kernel v4.8-rc8, to reuse serial_mxc with DTE and prepare for device tree migration of other functions and imx53 devices. The CX9020 differs from i.MX53 Quick Start Board by: - use uart2 instead of uart1 - DVI-D connector instead of VGA - no audio - CCAT FPGA connected to emi - enable rtc Signed-off-by: Patrick Bruenn <p.bruenn@beckhoff.com>
* arm: imx: add i.MX6SLL EVK board supportPeng Fan2016-12-16-0/+152
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add i.MX6SLL EVK board support. 1. Add imx6sll-evk device tree. 2. Enable SDHC/I2C/UART. 3. Enable REGULATOR/PMIC/I2C/GPIO/SDHC/PINCTRL driver. Boot Log: U-Boot 2016.11-00127-gc635871-dirty (Nov 24 2016 - 13:28:19 +0800) CPU: Freescale i.MX6SLL rev1.0 at 792MHz CPU: Commercial temperature grade (0C to 95C)Reset cause: POR Model: Freescale i.MX6SLL EVK Board Board: MX6SLL EVK DRAM: 2 GiB i2c bus 0 at 35258368, no gpio pinctrl state. PMIC: PFUZE100! DEV_ID=0x10 REV_ID=0x21 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0 Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* arm: dts: add i.MX6SLL device treePeng Fan2016-12-16-0/+204
| | | | | | | Add i.MX6SLL device tree. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* mx6_common: correct loadaddr and text base for i.MX6SLLPeng Fan2016-12-16-1/+2
| | | | | | | Correct loadaddr and text base for i.MX6SLL Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de>
* configs: colibri_vf: Add fdt_fixup environment variableSanchayan Maity2016-12-16-3/+4
| | | | | | | | u-boot allows modifying a device tree after it is loaded into memory. Add fdt_fixup hook in u-boot environment which can facilitate such modifications. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
* board/liteboard: Add support for liteBoardMarcin Niestroj2016-12-16-0/+171
| | | | | | | | | | | | liteBoard is a development board which uses liteSOM as its base. Hardware specification: * liteSOM (i.MX6UL, DRAM, eMMC) * Ethernet PHY (id 0) * USB host (usb_otg1) * MicroSD slot (uSDHC1) Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
* udoo_neo: Add Ethernet supportBreno Lima2016-12-16-1/+16
| | | | | | | | UDOO Neo boards has one FEC port connected to KSZ8091, add support for it. Tested on a UDOO Neo Full with "dhcp zImage" command. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Add PFUZE300 PMIC supportBreno Lima2016-12-16-0/+13
| | | | | | | | UDOO Neo boards has a PFUZE300 connected to I2C1 bus. Tested on a UDOO Neo Full with "pmic PFUZE3000 dump" command. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* power: pmic: Add Voltage configuration macroBreno Lima2016-12-16-0/+5
| | | | | | | Add pfuze3000 voltage configuration macro for SW1AB, SW3 and VLDO1/2 according to tables 53, 57 and 62 on PF3000 datasheet. Signed-off-by: Breno Lima <breno.lima@nxp.com>
* udoo_neo: Add thermal supportBreno Lima2016-12-16-0/+2
| | | | | | | Add thermal support on the Kconfig file. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove console optionBreno Lima2016-12-16-1/+0
| | | | | | | It's not necessary to define the console option as we use the distro config. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove mmcautodetect optionBreno Lima2016-12-16-1/+0
| | | | | | | It's not necessary to define the mmcautodetect as it is not used anywhere. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* udoo_neo: Remove USDHC3 supportBreno Lima2016-12-16-1/+0
| | | | | | | | It's not necessary to support USDHC3 in U-Boot as it's being used for the WLAN. Signed-off-by: Breno Lima <breno.lima@nxp.com> Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
* arm: imx: initial support for colibri imx6Max Krummenacher2016-12-16-0/+310
| | | | | | | | This adds board support for the Toradex module family Colibri iMX6. The familiy consists of a module with i.MX6 DualLite, i.MX6 Solo, both with a version for commercial and industrial temperature range. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* arm: imx: initial support for apalis imx6Max Krummenacher2016-12-16-0/+342
| | | | | | | | This adds board support for the Toradex module family Apalis iMX6. The familiy consists of a module with i.MX6 Dual, i.MX6 Quad with commercial and industrial temperature range. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
* davinci: omapl138_lcdk: boot from zImageFabien Parent2016-12-09-4/+5
| | | | | | | Stop booting legacy uImage and now boot zImage. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* davinci: omapl138_lcdk: fix bad NAND ECC configFabien Parent2016-12-09-5/+5
| | | | | | | | | | The configuration used to error correction was not in line with what linux and the ROM code is using. Fix it by using the correct configuration. Now u-boot and the SPL are able to read correctly anything written by them. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* davinci: omapl138_lcdk: increase u-boot load sizeFabien Parent2016-12-09-1/+1
| | | | | | | | A size of 0x200 seems way too short for u-boot. Increase the size to 512k. Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* spl: Add a name to the SPL load-image methodsSimon Glass2016-12-09-1/+14
| | | | | | | | | | | It is useful to name each method so that we can print out this name when using the method. Currently this happens using a separate function. In preparation for unifying this, add a name to each method. The name is only available if we have libcommon support (i.e can use printf()). Signed-off-by: Simon Glass <sjg@chromium.org>
* spl: Use a single underscore in the SPL_LOAD_IMAGE_METHOD() macroSimon Glass2016-12-09-7/+7
| | | | | | | A double underscore is normally reserved for compiler predefines. Use a single underscore instead. Signed-off-by: Simon Glass <sjg@chromium.org>
* Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"Tom Rini2016-12-09-24/+6
| | | | | This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.
* Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2016-12-09-6/+24
|\
| * common: miiphyutil: Add helper function for mdio bus nameMichal Simek2016-12-08-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The most of ethernet drivers are using this mdio registration sequence. strcpy(priv->bus->name, "emac"); mdio_register(priv->bus); Where driver can be used only with one MDIO bus because only unique name should be used. Other drivers are using unique device name for MDIO registration to support multiple instances. snprintf(priv->bus->name, sizeof(bus->name), "%s", name); With DM dev->seq is used more even in logs (like random MAC address generation: printf("\nWarning: %s (eth%d) using random MAC address - %pM\n", dev->name, dev->seq, pdata->enetaddr); ) where eth%d prefix is used. Simplify driver code to register mdio device with dev->seq number to simplify mdio registration and reduce code duplication across all drivers. With DM_SEQ_ALIAS enabled dev->seq reflects alias setting. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- For example: Board: Xilinx Zynq Net: ZYNQ GEM: e000b000, phyaddr 7, interface rgmii-id Warning: ethernet@e000b000 (eth0) using random MAC address - 7a:fc:90:53:6a:41 eth0: ethernet@e000b000ZYNQ GEM: e000c000, phyaddr ffffffff, interface rgmii-id Warning: ethernet@e000c000 (eth3) using random MAC address - 1a:ff:d7:1a:a1:b2 , eth3: ethernet@e000c000 ** Bad device size - mmc 0 ** Checking if uenvcmd is set ... Hit any key to stop autoboot: 0 Zynq> mdio list eth0: 17 - Marvell 88E1111S <--> ethernet@e000b000 eth3: 17 - Marvell 88E1111S <--> ethernet@e000c000 Zynq>
| * block: Move ceva driver to DMMichal Simek2016-12-08-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch also includes ARM64 zynqmp changes: - Remove platform non DM initialization - Remove hardcoded sata base address Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Series-to: sjg, agraf@suse.de Series-cc: uboot Series-version: 4 Series-changes: 2 - make ceva_init_sata static - Move SATA_CEVA to defconfig - Initalized max_lun and max_id platdata Series-changes: 3 - Extend Kconfig help description - sort dm.h - Remove SPL undefinition from board file - Fix Kconfig dependecies
| * dm: Add support for scsi/sata based devicesMichal Simek2016-12-08-2/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | All sata based drivers are bind and corresponding block device is created. Based on this find_scsi_device() is able to get back block device based on scsi_curr_dev pointer. intr_scsi() is commented now but it can be replaced by calling find_scsi_device() and scsi_scan(). scsi_dev_desc[] is commented out but common/scsi.c heavily depends on it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol is reassigned to a block description allocated by uclass. There is only one block description by device now but it doesn't need to be correct when more devices are present. scsi_bind() ensures corresponding block device creation. uclass post_probe (scsi_post_probe()) is doing low level init. SCSI/SATA DM based drivers requires to have 64bit base address as the first entry in platform data structure to setup mmio_base. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Simon Glass <sjg@chromium.org> Series-changes: 2 - Use CONFIG_DM_SCSI instead of mix of DM_SCSI and DM_SATA Ceva sata has never used sata commands that's why keep it in SCSI part only. - Separate scsi_scan() for DM_SCSI and do not change cmd/scsi.c - Extend platdata Series-changes: 3 - Fix scsi_scan return path - Fix header location uclass-internal.h - Add scsi_max_devs under !DM_SCSI - Add new header device-internal because of device_probe() - Redesign block device creation algorithm - Use device_unbind in error path - Create block device with id and lun numbers (lun was there in v2) - Cleanup dev_num initialization in block device description with fixing parameters in blk_create_devicef - Create new Kconfig menu for SATA/SCSI drivers - Extend description for DM_SCSI - Fix Kconfig dependencies - Fix kernel doc format in scsi_platdata - Fix ahci_init_one - vendor variable Series-changes: 4 - Fix Kconfig entry - Remove SPL ifdef around SCSI uclass - Clean ahci_print_info() ifdef logic
* | net: fman: fix 2.5G SGMII settingsshaohui xie2016-12-08-0/+1
| | | | | | | | | | | | | | | | | | The settings for 2.5G SGMII are wrong, which the 2.5G case is missed in set_if_mode(), and the serdes PCS configuration are wrong, this patch uses the correct settings took from Linux. Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | socfpga: add support for Terasic DE1-SoC boardAnatolij Gustschin2016-12-06-0/+57
|/ | | | | | | | Add CycloneV based Terasic DE1-SoC board. The board boots from SD/MMC. Ethernet and USB host is supported. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Marek Vasut <marex@denx.de>
* Merge git://git.denx.de/u-boot-fsl-qoriqTom Rini2016-12-05-1/+4
|\
| * fsl/ddr: Add erratum_a009942_check_cpo and clean related erratumShengzhou Liu2016-12-05-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | - add additional function erratum_a009942_check_cpo to check if the board needs tuning CPO calibration for optimal setting. - move ERRATUM_A009942(with revision to check cpo_sample option) from fsl_ddr_gen4.c to ctrl_regs.c for reuse on all DDR4/DDR3 parts. - move ERRATUM_A008378 from fsl_ddr_gen4.c to ctrl_regs.c - remove obsolete ERRATUM_A004934 which is replaced with ERRATUM_A009942. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> [YS: Replaced CONFIG_QEMU_E500 with CONFIG_ARCH_QEMU_E500] Reviewed-by: York Sun <york.sun@nxp.com>
* | davinci: omapl138_lcdk: increase PLL0 frequencyBartosz Golaszewski2016-12-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LCDC controller on the lcdk board has high memory throughput requirements. Even with the kernel-side tweaks to master peripheral and peripheral bus burst priorities, the default PLL0 frquency of 300 MHz is not enough to service the LCD controller and causes DMA FIFO underflows. Increment the PLL0 multiplier to 37, resulting in PLL0 frequency of 456 MHz - the same value that downstream reference u-boot from Texas Instruments uses. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | arm: baltos: enable booting from USBYegor Yefremov2016-12-05-0/+33
| | | | | | | | | | | | | | | | | | | | | | First of all U-Boot would search for a USB mass storage device with either uEnv.txt or kernel-fit.itb and boot. If USB mass storage device is not available or doesn't provide these files then MMC will be tried. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | Merge git://www.denx.de/git/u-boot-i2cTom Rini2016-12-05-101/+0
|\ \ | |/ |/|
| * arm: samsung: Convert s5p_goni and smdkc100 to DM_I2CSimon Glass2016-12-05-19/+0
| | | | | | | | | | | | | | | | These are the last two samsung boards that don't use DM_I2C. Move them over, leaving #ifdefs to allow the maintainer to complete this work. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
| * arm: exynos: i2c: Convert exynos boards to use DM_I2CSimon Glass2016-12-05-82/+0
| | | | | | | | | | | | | | | | | | | | Three boards are still not converting to use DM_I2C. They are also using the old PMIC framework. Rather than removing them, add #ifdefs to allow them to continue to build. This will give the maintainers a little more time to decide whether to convert them or not. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de>
* | arm64: mvebu: Add PCI support to DB-88F8040 boardStefan Roese2016-12-05-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds PCI support to the Marvell Armada-8K devel board. Additionally the Intel E1000 ethernet driver is enabled so that network support is available on this board, even without the internal network interfaces being supported (yet). Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
* | arm64: mvebu: Rename db-88f7040 files to armada-8kStefan Roese2016-12-05-3/+3
|/ | | | | | | | | | | | | | | | | This moves some of the Armada DB-88F7040 board specific files to a more generic name: armada-8k. This is in preparation for the Armada-8k support which will be added soon. And since both platforms share most devices, lets also share most source files to not duplicate the code here. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Neta Zur Hershkovits <neta@marvell.com> Cc: Kostya Porotchkin <kostap@marvell.com> Cc: Omri Itach <omrii@marvell.com> Cc: Igal Liberman <igall@marvell.com> Cc: Haim Boot <hayim@marvell.com> Cc: Hanna Hawa <hannah@marvell.com>
* Merge git://git.denx.de/u-boot-mpc85xxTom Rini2016-12-04-76/+0
|\
| * powerpc: mpc86xx: Move CONFIG_FSL_LAW to KconfigYork Sun2016-12-02-4/+0
| | | | | | | | | | | | Clean up existing definitions and drop from white list. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: mpc85xx: Move CONFIG_FSL_LAW to KconfigYork Sun2016-12-02-68/+0
| | | | | | | | | | | | | | Some header files have this macro defined conditionally and redefined unconditionally. Remove all existing definitions. Signed-off-by: York Sun <york.sun@nxp.com>
| * powerpc: mpc86xx: Convert CONFIG_SYS_CCSRBAR_DEFAULT to Kconfig optionYork Sun2016-12-02-4/+0
| | | | | | | | | | | | Move default value definitions to Kconfig SYS_CCSRBAR_DEFAULT. Signed-off-by: York Sun <york.sun@nxp.com>
* | arm: Remove VCMA9 boardSimon Glass2016-12-04-205/+0
| | | | | | | | | | | | | | | | | | This board has not been converted to DM_SERIAL by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jagan Teki <jagan@openedev.com>
* | arm: Remove smdk2410 boardSimon Glass2016-12-04-180/+0
| | | | | | | | | | | | | | | | This board has not been converted to DM_SERIAL by the deadline. Remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: David Müller <d.mueller@elsoft.ch>
* | ti_armv7_common: env: Increase IO buffer sizeLokesh Vutla2016-12-04-1/+1
| | | | | | | | | | | | | | | | | | There are certain environment variables whose length is greater than the defined IO buffer size. So, increase the IO buffer size to print the entire variables. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: am57xx: Add support for the am571x idkSteve Kipisz2016-12-04-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AM571x Industrial Development Kit (IDK) is a board based on TI's AM571x SoC which has a single core 1.5GHz Cortex-A15processor. This board is a development platform for the Industrial Market with: - 1GB of DDR3L - Dual 1Gbps Ethernet - HDMI - PRU-ICSS - uSD - 16GB eMMC - CAN - RS-485 - PCIe - USB3.0 - Video Input Port - Industrial IO port and expansion connector The PRU/ICSS will be supported by 3rd party software for EtherCat, Profibus, and other Industrial protocols. The link to the data sheet and TRM can be found here: http://www.ti.com/product/AM5718 Signed-off-by: Steve Kipisz <s-kipisz2@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: am57xx: Add support for detection of X15 revb1Lokesh Vutla2016-12-04-0/+2
| | | | | | | | | | | | | | | | | | | | BeagleBoard-X15 Rev B1 with SR1.1 platform have incompatible changes for HDMI GPIO requiring new dtb support. This implies we have to properly identify the platform now as well. Hence provide a different board name for the Rev B1 variants. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | board: ti: am57xx: Add support for detection of reva3 variations for GPEVMNishanth Menon2016-12-04-0/+2
| | | | | | | | | | | | | | | | | | | | | | AM57xx evm Rev A3 with SR2.0 platform have incompatible changes for HDMI GPIO requiring new dtb support. This implies we have to properly identify the platform now as well. Hence provide a different board name for the Rev A3 variations. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
generated by cgit v1.1 at 2024-07-04 21:24:58 +0000