summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* MLK-14326-7 mx6sxsabresd: Enable OF_CONTROL and DM driversYe Li2017-04-05-4/+22
| | | | | | | Update mx6sxsabresd board files and build configurations to enable OF_CONTROL and DM drivers. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-6 mx6sxsabresd: Update and add mx6sxsabresd DTS filesYe Li2017-04-05-2/+6
| | | | | | | | | | | Update i.MX6SX dtsi file and relevant DTS header files. Add the imx6sx-sdb DTS files preparing for using DTB. To support DM QSPI driver 1. Modify the n25q256a flash node's compatible to "spi-flash". 2. Add spi0 and spi1 alias for qspi1 and qspi2. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14326-3 mx6qsabreauto: Enable OF_CONTROL and DM driverYe Li2017-04-05-18/+19
| | | | | | | | | | | | | | Enable OF_CONTROL and DM driver on mx6qsabreauto. 1. Add the imx6qsabreauto relevant DTS file for using DTB. 2. Modify PMIC initialization codes to use DM PMIC driver. 3. Modify to use PCA953X DM driver 4. Remove NAND from default, since the default imx6q-sabreauto.dts disabled the nand. The pins are conflicted with UART3, while UART3 is enabled. 5. For NAND build configuration, remove the USB, since the imx6q-sabreauto-gpmi-weim.dts will have pin conflicts on steer logic. 6. GPIO requests added. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14375-1 mx6ullevk: Update board codes to align with v2016.03Ye Li2017-04-05-15/+157
| | | | | | | | | | | | | | | | | | Update mx6ull evk to add features from v2016.03. 1. Add support for NAND flash. 2. Add support for QSPI DM driver. 3. Add USB DM driver support. 4. Add two FEC support by using DM FEC driver 5. Update environments for various boot devices support: SD/NAND/eMMC/QSPI 6. Add MFGtool environments. 7. Add board codes for 9x9 EVK board For the DTS file, some changes are needed for using QSPI DM driver 1. Add spi0 alias for qspi node. Which is used for bus number 0. 2. Modify the n25q256a@0 compatible property to "spi-flash". 3. Modify spi4 (gpio_spi) node to spi5 Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14366 mx6sllevk: Update board codes to align with v2016.03Ye Li2017-04-05-1/+14
| | | | | | | | | | Update mx6sll EVK board codes for features: 1. Add SD/MMC dynamical device detect. 2. Add wdog set for kernel. 3. Add mfgtool environments. 4. Modify SD/MMC environment offset. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12723 imx: Change the env offset on NAND to 60MYe Li2017-04-05-3/+3
| | | | | | | | | | | | | | | | Current environment offset on NAND is 37MB, this will cause a alignment issue when erasing if nand erase block is 2MB. The saveenv is failed. => saveenv Saving Environment to NAND... Erasing NAND... Attempt to erase non block-aligned data Since the max erase block we supported is 4MB, adjust the env offset to 60MB, where is the last 4MB in 64MB reserved area for boot. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 22f6c4b151fbdea1985403086715de841152c880)
* MLK-12416-9: mx6qp: define CONFIG_MX6QPPeng Fan2017-04-05-0/+4
| | | | | | | | Define CONFIG_MX6QP which will also set CONFIG_MX6Q, otherwise plugin code will use wrong ddr script. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 901d9eb01736ab54822678a197fe1aeb281a81b9)
* MLK-12442: imx: mx6qarm2: lpddr2 set dram 2 channel fixed modeAdrian Alonso2017-04-05-1/+13
| | | | | | | | | | | | | | Setup MMDC in two channel fixed mode Initialize dram banks for two channel fixed mode DRAM bank = 0x00000000 -> start = 0x10000000 -> size = 0x20000000 DRAM bank = 0x00000001 -> start = 0x80000000 -> size = 0x20000000 Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com> (cherry picked from commit bf1d8faf1dab7c4245ba7b79ceef6279cff45625)
* MLK-12560 mx6: Enable eMMC boot support for all mx6Ye Li2017-04-05-1/+1
| | | | | | | | | Set the CONFIG_SUPPORT_EMMC_BOOT in mx6_common.h to enable the eMMC boot support for all mx6 platforms. Remove the duplicated definition in board's header file. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit dbe744de73c88f14e01f56a3258752ab5cd45b14)
* MLK-12531 mx6sxsabresd: Add CM4 fast boot up demoYe Li2017-04-05-2/+11
| | | | | | | | | | | | | | | | | | This is a demo that CM4 will boot up by u-boot without typing any command. It boots up at u-boot early init, try to minimize the time from power up to the CM4 running. Since CM4 runs on QSPI NOR XIP, we have to disable the QSPI driver in u-boot to avoid conflict. RDC for shared GPIO1 is added, but not enabled, because the kernel is not ready for shared GPIO1. Users can uncomment the CONFIG_IMX_RDC to enable it. Some legacy codes in mx6sxsabreauto are removed. We only need this work on mx6sxsabresd as a demo. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit f66842f79d4e33ace45762466eed23a86d367642)
* MLK-12493-1 Add support for various boot deviceYe Li2017-04-05-104/+293
| | | | | | | | | | Add support for various boot devices like NAND, QSPINOR, SPINOR, eMMC, EIMNOR, SATA. Modify board level files to support the feature and add corresponding defconfig files Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 72c35e80b86f7f75a52db45959793882bb730793)
* MLK-12500-2 HAB: Add commented secure boot configurationsYe Li2017-04-05-0/+6
| | | | | | | | | | | | CONFIG_SECURE_BOOT is used for signed image building, this configuration is not enabled at default. Comment it in mx6/mx7 common header file. Users can uncomment it to enable. Also add CONFIG_CSF_SIZE for defining the CSF reserved size and resize the CONFIG_CSF_SIZE to 0x4000 to align with v2016.03. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 01cc7d9bc205251c13712418d51f3a4d7b20861b)
* MLK-12495 mx6: Add LDO bypass supportYe Li2017-04-05-0/+6
| | | | | | | | | | | | | | | | Port LDO bypass support from v2015 to support the features: 1. Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz, enable LDO bypass and setup PMIC voltages. LDO bypass is dependent on the flatten device tree file. 2. We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to reboot whole board, so split these code to independent function so that board file can call it freely. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 5b87d04dba66fa45375d59648838ef89f559f75d)
* MLK-12436-17: imx: mx6sxsabreauto: update board and headerYe Li2017-04-05-2/+30
| | | | | | | | | | | | Align with imx_v2016.03 1. Update pmic settings to enable SD3 power and use PMIC common init codes. 2. Enable bmode. 3. Update MMC root parameters 4. Update AUXBOOT for M4 Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 0816a496fbe3f7d0e4f1a9322c76908a5c557c8c) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12436-16: imx: mx6sxsabresd: update board and headerPeng Fan2017-04-05-5/+26
| | | | | | | | | | | | | | Align with imx_v2016.03. Add emmc support which needs board rework. Add I2C2. Update pmic settings. Add bmode. Move partial code from board_early_init_f to board_init. Add PCI power and reset GPIO and disable PCI at default. Update QSPI settings. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 9613a2d07760f56b3c93779b14ad32ef69856da7)
* MLK-12436-13: mx6ulevk: Add usb ethernetPeng Fan2017-04-05-0/+2
| | | | | | | | Align with imx_v2016.03. Add usb ethernet support, since there is no FEC on this i.MX6UL Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 9811e3db89f535e54ae10a10caa660f8e6036270)
* MLK-12436-12: mx6slevk: update board codePeng Fan2017-04-05-2/+13
| | | | | | | | | | | | | | Add elan code, to handle epdc which has i2c devices. In imx_v2015.04, the two pathces are for elan. b6ba68516b681a38025252bd0ef6a6ed3e8adfa0 MLK-10215 Add elan init in i.MX6SL-EVK board 0c600f6a67f00fe0c674c08c355bea3789109679 MLK-10885 imx: mx6slevk ignore elan init when no epdc on board Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit cb249aa1d57788c52145d28f2e2c68cb320d8ae3) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12436-10: mx6sabresd: update board code and header fileYe Li2017-04-05-5/+27
| | | | | | | | | | | Align board code and header file with imx_v2016.03. Update pmic settings for i.MX6QP. wrap spi code together using CONFIG_MXC_SPI macro. To i.MX6SOLO, need to define nosmp in bootargs. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit bb35d09d140efc7ff9b74bbcd77d7827c1dd503e) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12436-8: imx: mx6qsabreauto: misc board updatePeng Fan2017-04-05-4/+16
| | | | | | | | | | | | | | | | To Align with imx_v2016.03. 1. Add USDHC1 support on mother board 2. Add SPINOR flash support. 3. Add enet ref clk pinmux setting and enet settings 4. Use CONFIG_SYS_USE_EIMNOR to wrap eimnor settings. 5. update mmc board settings 6. update board_init and move nand settings to board_init, but not in board_early_init_f 7. update pmic settings to align with datasheet. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit f05f2281548ab7b47f69b2c517eb6f85ad09a5d2) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14261-2 mx6solo: Add nosmp kernel bootargsYe Li2017-04-05-2/+9
| | | | | | | For i.MX6 SOLO sabreauto and sabresd boards, add the "nosmp" kernel bootargs. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14261-1 mx6solo: Rename the CONFIG_MX6SOLO to CONFIG_MX6SYe Li2017-04-05-1/+5
| | | | | | | | | | | | | Since there is already CONFIG_MX6S used for i.MX6 SOLO in u-boot codes, we don't need to add new CONFIG_MX6SOLO. Rename the existing CONFIG_MX6SOLO to CONFIG_MX6S. Additional, for CONFIG_MX6S, we should select CONFIG_MX6DL. The major difference for these two chips are core number and DDR controller. So all duallite relevant definitions can apply to solo. User can combine the two configs if any code only apply to solo or duallite. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12436-4: mx6qarm2: update board headerPeng Fan2017-04-05-2/+4
| | | | | | | | | Define CONFIG_MMCROOT, CONFIG_SYS_MMC_ENV_PART to align with imx_v2016.03. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit b06ddb7a09346bf21028a239e77d5bf92469a284) Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12444-2 mx6: Modify kernel and fdt load address to align with mfgtoolYe Li2017-04-05-4/+5
| | | | | | | | | Change the CONFIG_LOADADDR to 0x80800000 and environment variable "fdt_addr" to 0x83000000 for i.MX6SX, i.MX6SL and i.MX6UL to align the address used in mfgtool. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 41a6f612f6ae638ac6db61c60e19dcfebf052820)
* MLK-12444-1 mfgtool: Add mfgtool supportYe Li2017-04-05-1/+107
| | | | | | | | | | | | | If boot from usb, reset environment to default value. Auto apply mfgtools setting and boot mfgtools kernel. Porting this from fsl uboot to uboot 2016. The 7dsabresd has already added the environment and usb boot related functions. No need to add them more. Only need to add NAND parts environment for mfgtools. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit a352ed3c5184b95c4c9f7468f5fbb5f43de5e412)
* MLK-14259-3 mx6ulevk: Add support for NANDYe Li2017-04-05-1/+18
| | | | | | | Add NAND pinmux settings, clock setting and related configurations. Default not enabled, need hardware rework. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14259-2 mx6ulevk: Add PHYS_SDRAM_SIZE and CMA macroYe Li2017-04-05-0/+10
| | | | | | | | Define PHYS_SDRAM_SIZE future usage. Define CMA for kernel usage, default is 320MB, but we do not have enough memory on 9x9 evk lpddr2 board, so swith to 96MB. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12483-5 mx6ul: Enable module fuse check EVK boardYe Li2017-04-05-0/+2
| | | | | | | | Enable the configurations CONFIG_MODULE_FUSE and CONFIG_OF_SYSTEM_SETUP for module fuse check. And modify board level codes for SD, FEC and EIM. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 9232e9f7637afa3b71b43ab2d1361582ec5a080a)
* ENGR00315894-55 iMX6SX: add debug monitor supportYe.Li2017-04-05-0/+2
| | | | | | | | | | | | | | Debug monitor will print out last failed AXI access info when system reboot is caused by AXI access failure, only works when debug monitor is enabled. Enable this module on i.MX6SX. Signed-off-by: Anson Huang <b20788@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit df6ac8531d498021ed379c74fc1847bd2cec7179) Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit 4f4ecdbf6fe2673b8ad117df1a4974bdb7e6aa4a)
* MLK-10576 ARM: i.MX6: exclude the ARM errata from i.MX6 UP systemNitin Garg2017-04-05-0/+9
| | | | | | | | | | | | | | | | | The ARM errata 751472, 794072, 761320, 845369 only applied to the following configuration: This erratum affects configurations with either: - One processor if the ACP is present - Two or more processors i.MX6 family does not have the ACP and thus only the MPCore system will be impacted, which are the i.MX6DQ, i.MX6DL, and i.MX6QP. Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com> (cherry picked from commit 0db960784ba4f631ee5c0321b5d25f3b1ac55640) (cherry picked from commit 850f27d137a083a141c99fe9828d596807937d38)
* MLK-12557 mx6ul: Enable syscounter as default timerYe Li2017-04-05-0/+4
| | | | | | | | | Use syscounter for i.MX6UL platform as default timer, not use GPT. Add a CONFIG_GPT_TIMER for selecting GPT. Using CONFIG_SYSCOUNTER_TIMER for selecting system counter. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 1c27c9ecf80b3cc63a7c9751ebfd11755f847b1d)
* MLK-12452-4 mx6sxsabreauto: Add secondary enet supportYe Li2017-04-05-0/+7
| | | | | | | Add configurations and board codes for second enet. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 4dfd06dc649615f8dd3e1ac8018a0a7109fc4147)
* MLK-12452-3 mx6sxsabresd: Add secondary enet supportYe Li2017-04-05-0/+7
| | | | | | | Add configurations and board codes for second enet. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit b646262f1f201e11e08968ddf88aeb8ab41fcf21)
* MLK-12439 mx6sxsabreauto: Enable GIS for the AI boardYe Li2017-04-05-0/+6
| | | | | | | | | Enable the GIS feature for i.MX6SX sabreauto board. Need to define the "gis=vadc" environment variable for the gis input. At default this variable is not set. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 2271dcfee3500e96503a9fc59929e73167e3c4a2)
* ENGR00315894-81 gis: Add gis moduleYe.Li2017-04-05-0/+19
| | | | | | | | | | | Add gis module, current gis is support vadc input. Add power down function to lcdif driver. Signed-off-by: Sandor Yu <R01008@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793) (cherry picked from commit a31dcdafb0963381e7213c59f79a340ef27ec2e2) (cherry picked from commit 02dfe2e4af5f51d39a51542fb0e81f93faf505bc)
* MLK-14365-2 mx6ullevk: Add LCD splash screen supportYe Li2017-04-05-0/+12
| | | | | | | Add LCD configurations and TFT43AB display settings for mx6sllevk. Enable the CONFIG_VIDEO for this feature. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-14365-1 mx6sllevk: Add LCD splash screen supportYe Li2017-04-05-0/+12
| | | | | | | Add LCD configurations and MCIMX28LCD display settings for mx6sllevk. Enable the CONFIG_VIDEO for this feature. Signed-off-by: Ye Li <ye.li@nxp.com>
* MLK-12437-5 mx6ulevk: Update display to support panel selectionYe Li2017-04-05-2/+2
| | | | | | | | Change to panel environment for display at default. Align this feature to v2015.04 uboot. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit ea93a34a3348f80462ea5b61a4ca2e9a1d267f4c)
* MLK-12437-4 mx6sxsabreauto: Update display to support panel selectionYe Li2017-04-05-1/+21
| | | | | | | | Support two display panels, one for LVDS, another for parallel LCD. Align the feature to v2015.04 uboot. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit d5f7833adf6236357cf3c139e14e46d718e20524)
* MLK-12437-3 mx6sxsabresd: Update display to support panel selectionYe Li2017-04-05-3/+5
| | | | | | | | Support two display panels, one for LVDS, another for parallel LCD. Align the feature to the v2015.04 uboot. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit d7f54f22607ffcace6cda97984649a5ae4f65996)
* ENGR00315894-70 iMX6SX:Video Update MXS LCDIF driverYe.Li2017-04-05-0/+27
| | | | | | | | | | | | | | | Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and specifies the LCDIF controller for multiple controllers of iMX6SX. Pass fb parameters via "videomode" env remains work if the new interface is not called before video initialization. Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple LCDIF controllers on iMX6SX. Signed-off-by: Ye.Li <B37916@freescale.com> Signed-off-by: Peng Fan <Peng.Fan@freescale.com> (cherry picked from commit d7f49b9378547c3a57b96bcdb907fc44616beb3d) (cherry picked from commit e1343191b9de227c582847e7eeb5ce9238be0754)
* MLK-12434-6: mx6slevk: dynamic setting mmcdev and mmcrootPeng Fan2017-04-05-0/+1
| | | | | | | Dynamic setting mmcdev and mmcroot for mx6slevk. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 3308f3c48c644938c415ead23ed9acedc2fd7981)
* MLK-12434-5: mx6sxsabreauto: dynamic setting mmcdev and mmcrootPeng Fan2017-04-05-0/+1
| | | | | | | Dynamic setting mmcdev and mmcroot for mx6sxsabresd. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit ebb43ae292d43817202b71b25368516887f4686b)
* MLK-12434-4: mx6sxsabresd: dynamic setting mmcdev and mmcrootPeng Fan2017-04-05-0/+1
| | | | | | | Dynamic setting mmcdev and mmcroot for mx6sxsabresd. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit fb53c90269ead4f72028fd9bcc764e4924921a30)
* MLK-12434-3: mx6sabre: dynamic setting mmcdev and mmcrootPeng Fan2017-04-05-0/+1
| | | | | | | Dynamic setting mmcdev and mmcroot for mx6sabresd and mx6qsabreauto. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 14040e07549a394500c11e815f31299e4fb0ac50)
* MLK-12434-2: mx6qarm2: dynamic setting mmcdev and mmcrootPeng Fan2017-04-05-1/+2
| | | | | | | Dynamic setting mmcdev and mmcroot for mx6qarm2. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 54ea563dbe1804e426afbbf0710ffa815551d92b)
* MLK-12425-4: mx6dlsabresd: support epdcPeng Fan2017-04-05-2/+22
| | | | | | | | | Support epdc for mx6dlsabresd board. Introduce a new configuration file mx6dlsabresd_epdc_defconfig. Add related settings. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 467974ffda4b874e16f0c84974c3d65d85f84f6a)
* MLK-12425-3: mx6slevk: support epdcPeng Fan2017-04-05-2/+24
| | | | | | | | | Support epdc for mx6slevk board. Introduce a new configuration file mx6slevk_epdc_defconfig. Add related settings. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit 8e4304c2ab95928fb6fbb24ba83115cf1cd1e6d2)
* MLK-12425-2: video: epdc: introduce epdc supportPeng Fan2017-04-05-1/+645
| | | | | | | | | | | | | | | | | | | | | | | | | Support EPDC. E-Ink feature is supported by i.MX6DL/SL and i.MX7D. For now this driver only supports i.MX6DL/SL, because the i.MX7D EPDC driver needs pxp support which is not included in U-Boot. Support user defined logo file, if there is no logo file, it will draw a black border around a white screen. If need to enable EPDC, a waveform file is required to let all work. Since we need LCD_MONOCHROME mode for EPDC, we introduce LCD_MONOCHROME support. Please refer to Linux Reference Manual for how to flash WAVEFORM file. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Robby Cai <R63905@freescale.com> Signed-off-by: Nitin Garg <nitin.garg@freescale.com> Signed-off-by: Ye.Li <B37916@freescale.com> (cherry picked from commit a7244f279cc3c3994bcd103f5e9a183b1075ae71)
* MLK-12416-10: mx6ul: Add comments for BEEPeng Fan2017-03-14-0/+3
| | | | | | | Add comments for enabling BEE. Signed-off-by: Peng Fan <peng.fan@nxp.com> (cherry picked from commit e5cc58b71e28b2bb3c66fbe8af373cff31eb3017)
* MLK-13335 mx6sl: Fix build break for all i.MX6SL boardsYe Li2017-03-14-2/+2
| | | | | | | | | Since the UART1 register base name is changed from UART1_IPS_BASE_ADDR to UART1_BASE to align with other i.MX6 chips. Should update the board configuration header file with the new name. Signed-off-by: Ye Li <ye.li@nxp.com> (cherry picked from commit 18019b8f4b65d3261db6488e416eae66a6500316)
generated by cgit v1.1 at 2024-07-05 01:19:32 +0000