summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* arm: m53evk: Fix RTC bus numberMarek Vasut2014-08-08-1/+1
| | | | | | | | | A previous update to the I2C stack introduced a typo in the configuration option. Fix the typo and therefore allow the RTC to work correctly with the 'date' command again. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armStefano Babic2014-08-08-379/+1065
|\
| * ARM: convert arch_fixup_memory_node to a generic FDT fixup functionMa Haijun2014-07-28-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | Some architecture needs extra device tree setup. Instead of adding yet another hook, convert arch_fixup_memory_node to be a generic FDT fixup function. [maz: collapsed 3 patches into one, rewrote commit message] Signed-off-by: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-07-28-323/+387
| |\
| | * ARM: omap: move board specific NAND configs out from ti_armv7_common.hpekon gupta2014-07-25-8/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves some board specific NAND configs: - FROM: generic config file 'ti_armv7_common.h' - TO: individual board config files using these configs. So that each board can independently set the value as per its design. Following configs are affected in this patch: CONFIG_SYS_NAND_U_BOOT_OFFS: <refer doc/README.nand> CONFIG_CMD_SPL_NAND_OFS: <refer doc/README.falcon> CONFIG_SYS_NAND_SPL_KERNEL_OFFS: <refer doc/README.falcon> CONFIG_CMD_SPL_WRITE_SIZE: <refer doc/README.falcon> This patch also updates documentation for few of above NAND configs. Signed-off-by: Pekon Gupta <pekon@ti.com>
| | * ARM: omap: clean redundant PISMO_xx macros used in OMAP3pekon gupta2014-07-25-76/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PISMO_xx macros were used to define 'Platform Independent Storage MOdule' related GPMC configurations. This patch - Replaces these OMAP3 specific macros with generic CONFIG_xx macros as provided by current u-boot infrastructure. - Removes unused redundant macros, which are no longer required after merging of common platform code in following commit commit a0a37183bd75e74608bc78c8d0e2a34454f95a91 ARM: omap: merge GPMC initialization code for all platform +-----------------+-----------------------------------------------------------+ | Macro | Reason for removal | +-----------------+-----------------------------------------------------------+ | PISMO1_NOR_BASE | duplicate of CONFIG_SYS_FLASH_BASE | +-----------------+-----------------------------------------------------------+ | PISMO1_NAND_BASE| duplicate of CONFIG_SYS_NAND_BASE | +-----------------+-----------------------------------------------------------+ | PISMO1_ONEN_BASE| duplicate of CONFIG_SYS_ONENAND_BASE | +-----------------+-----------------------------------------------------------+ | PISMO1_NAND_SIZE| GPMC accesses NAND device via I/O mapped registers so | | | configuring GPMC chip-select for smallest allowable | | | segment (GPMC_SIZE_16M) is enough. | +-----------------+-----------------------------------------------------------+ | PISMO1_ONEN_SIZE| OneNAND uses a fixed GPMC chip-select address-space of | | | 128MB (GPMC_SIZE_128M) | +-----------------+-----------------------------------------------------------+ +-----------------+-----------------------------------------------------------+ | PISMO1_NOR | Unused Macros | | PISMO1_NAND | | | PISMO2_CS0 | | | PISMO2_CS1 | | | PISMO1_ONENAND | | | PISMO2_NAND_CS0 | | | PISMO2_NAND_CS1 | | | PISMO1_NOR_BASE | | | PISMO1_NAND_BASE| | | PISMO2_CS0_BASE | | +-----------------+-----------------------------------------------------------+ Signed-off-by: Pekon Gupta <pekon@ti.com>
| | * ARM: omap: fix GPMC address-map size for NAND and NOR devicespekon gupta2014-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes commit a0a37183bd75e74608bc78c8d0e2a34454f95a91 ARM: omap: merge GPMC initialization code for all platform 1) NAND device are not directly memory-mapped to CPU address-space, they are indirectly accessed via following GPMC registers: - GPMC_NAND_COMMAND_x - GPMC_NAND_ADDRESS_x - GPMC_NAND_DATA_x Therefore from CPU's point of view, NAND address-map can be limited to just above register addresses. But GPMC chip-select address-map can be configured in granularity of 16MB only. So this patch uses GPMC_SIZE_16M for all NAND devices. 2) NOR device are directly memory-mapped to CPU address-space, so its address-map size depends on actual addressable region in NOR FLASH device. So this patch uses CONFIG_SYS_FLASH_SIZE to derive GPMC chip-select address-map size configuration. Signed-off-by: Pekon Gupta <pekon@ti.com>
| | * board: k2e-evm: add board supportHao Zhang2014-07-25-0/+37
| | | | | | | | | | | | | | | | | | | | | This patch adds Keystone2 k2e_evm evaluation board support. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * ARM: keystone2: clock: add K2E clock supportHao Zhang2014-07-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds clock definitions and commands to support Keystone2 K2E SOC. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * configs: k2hk_evm: config: add common EVM configuration headerHao Zhang2014-07-25-244/+289
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a common config header file for all the Keystone II EVM platforms. It combines a lot of general definitions in one file. The common header included in the EVM should be specific configuration header. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * ARM: keystone2: move K2HK board files to common KS2 board directoryHao Zhang2014-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves K2HK board directory to a common Keystone II board directory. The Board related common functions are moved to a common keystone board file. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * k2hk: use common KS2_ prefix for all hardware definitionsKhoronzhuk, Ivan2014-07-25-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use KS2_ prefix in all definitions, for that replace K2HK_ prefix and add KS2_ prefix where it's needed. It requires to change names also in places where they're used. Align lines and remove redundant definitions in kardware-k2hk.h at the same time. Using common KS2_ prefix helps resolve redundant redefinitions and adds opportunity to use KS2_ definition across a project not thinking about what SoC should be used. It's more convenient and we don't need to worry about the SoC type in common files, hardware.h will think about that. The hardware.h decides definitions of what SoC to use. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * ARM: omap: tao3530: Convert to generic boardStefan Roese2014-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Use generic board setup functions by defining CONFIG_SYS_GENERIC_BOARD. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com>
| | * tricorder: convert to generic boardAndreas Bießmann2014-07-25-0/+2
| | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Thomas Weber <thomas.weber@corscience.de>
| | * k2hk_evm: add script to automate NAND flash processKhoronzhuk, Ivan2014-07-25-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add script to automate NAND flash process. As for now the board has two burn scripts - burn to boot from SPI NOR flash and burn to boot from AEMIF NAND flash, rename burn_uboot script to burn_uboot_spi. Also update README to contain NAND burn U-boot process description. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com>
| | * mtd: nand: davinci: add opportunity to write keystone U-boot imageKhoronzhuk, Ivan2014-07-25-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Keystone SoCs use the same NAND driver as Davinci. This patch adds opportunity to write Keystone U-boot image to NAND device using appropriate RBL ECC layout. This is needed only if RBL boots U-boot from NAND device and that's supposed that raw u-boot partition is used only for writing image. The main problem is that default Davinci ECC layout is different from Keystone RBL layout. To read U-boot image the RBL needs that image was written using RBL ECC layout. The BBT table is written using default Davinci layout and has to be updated using one. The BBT can be updated only while erasing chip or by forced bad block assigning, so erase function has to use native ecc layout in order to be able to write BBT correctly. So if we're writing to NAND U-boot address we use RBL layout for others we use default ECC layout. Also remove definition for CONFIG_CMD_NAND_ECCLAYOUT as there is no reasons to use ECC layout commands. It was added by mistake. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * tps65218/am43xx_evm: Add power framework support to TPS65218Tom Rini2014-07-25-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Add in an init function for the drivers/power framework so we can dump and read the registers via i2c. Cc: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@ti.com>
| | * power/pmic.h: Add prototype for power_init_board.Tom Rini2014-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | As this is a weak function that we may override, provide a prototype for it. Cc: Łukasz Majewski <l.majewski@samsung.com> Signed-off-by: Tom Rini <trini@ti.com>
| | * drivers: net: cpsw: add support for using second port as ethernetMugunthan V N2014-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | Add support for using the second slave port of cpsw to be used as primary ethernet. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
| * | Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'Albert ARIBAUD2014-07-28-0/+166
| |\ \
| | * | arm: rmobile: Add support Alt boardNobuhiro Iwamatsu2014-07-24-0/+166
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The alt board has R8A7794, 1GB DDR3-SDRAM, USB, Ethernet, QSPI, MMC, SDHI and more. This commit supports the following functions: - DDR3-SDRAM - SCIF - I2C - Ethernet - QSPI Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | Merge branch 'u-boot-sunxi/master' into 'u-boot-arm/master'Albert ARIBAUD2014-07-28-3/+102
| |\ \
| | * | sunxi: add gpio driverIan Campbell2014-07-18-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables CONFIG_CMD_GPIO for the Allwinner (sunxi) platform as well as providing the common gpio API (gpio_request/free, direction in/out, get/set etc). Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: Henrik Nordström <henrik@henriknordstrom.net> Cc: Tom Cubie <Mr.hipboi@gmail.com> Acked-by: Hans de Goede <hdegoede@redhat.com>
| | * | sunxi: use random parts of SID to set ethaddrJonathan Liu2014-07-18-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Similar to the USB NIC found on OMAP5uEVM, PandaBoard and BeagleBoard-XM boards, the sunxi SoCs have a NIC onboard without an embedded MAC address. Just like the omap used on these boards, the sunxi SoCs do have a unique chip id, in the form of the 128 bit SID register: http://linux-sunxi.org/SID_Register_Guide So mimick the BeagleBoard-XM board code (commit 548a64d8) and use the chip id to generate a unique fixed MAC address. We check for the SID not being all 0, since some early A20 batches shipped without having there SID programmed. Note we use specific parts of the 128 bits, since some parts indicate the SoC family / revision, and thus are fixed. The algorithm for this was taken from the linux-sunxi.org kernels. Signed-off-by: Jonathan Liu <net147@gmail.com> [hdegoede@redhat.com: Expanded the commit message with some more info] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add axp152 pmic supportHans de Goede2014-07-18-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the x-powers axp152 pmic which is found on most A10s boards and enable it for the r7-tv-dongle board. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add axp209 pmic supportHenrik Nordstrom2014-07-18-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the x-powers axp209 pmic which is found on most A10, A13 and A20 boards. And enable AXP209 support for the Cubietruck and Cubieboard boards. Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add i2c supportHans de Goede2014-07-18-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the i2c controller found on all Allwinner sunxi SoCs, this is the same controller as found on the Marvell orion5x and kirkwood SoC families, with a slightly different register layout, so this patch uses the existing mvtwsi code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk> Acked-By: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Heiko Schocher <hs@denx.de> [ ijc -- updated u-boot-spl-fel.lds ]
| | * | mvtwsi: convert to CONFIG_SYS_I2C frameworkHans de Goede2014-07-16-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note this has only been tested on Allwinner sunxi devices (support for which gets introduced by a later patch). The kirkwood changes have been compile tested using the wireless_space board config, the orion5x changes have been compile tested using the edminiv2 board config. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Heiko Schocher <hs@denx.de>
| | * | sunxi: Add emac glue, enable emac on the cubieboardHans de Goede2014-07-06-0/+5
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | net: Rename and cleanup sunxi (Allwinner) emac driverStefan Roese2014-07-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There have been 3 versions of the sunxi_emac support patch during its development. Somehow version 2 ended up in upstream u-boot where as the u-boot-sunxi git repo got version 3. This bumps the version in upstream u-boot to version 3 of the patch: - Initialize MII clock earlier so mii access to allow independent use - Name change from WEMAC to EMAC to match mainline kernel & chip manual - Cosmetic code cleanup Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add sun5i supportHans de Goede2014-07-06-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Allwinner A13 and A10s SoCs also know as the Allwinner sun5i family, and the A13-OLinuXinoM A13 based and r7-tv-dongle A10s based boards. The only differences compared to the already supported sun4i and sun7i families are all in the DRAM controller initialization: -Different hcpr values -Different MBUS settings -Some other small initialization changes Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Add sun4i supportHans de Goede2014-07-06-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the Allwinner A10 SoC also known as the Allwinner sun4i family, and add the Cubieboard board which uses the A10 SoC. Compared to sun7 only the DRAM controller is a bit different: -Controller reset bits are inverted, but only for Rev. A -Different hpcr values -No MBUS on sun4i -Various other initialization changes Signed-off-by: Henrik Nordstrom <henrik@henriknordstrom.net> Signed-off-by: Stefan Roese <sr@denx.de> Signed-off-by: Oliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| | * | sunxi: Remove mmc DMA supportHans de Goede2014-07-06-1/+0
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DMA code in sunxi_mmc.c is broken. mmc_trans_data_by_dma() allocates the dma descriptors on the stack, and then exits while the dma transfer is in progress, so the dma engine is reading stack memory which at that point may be re-used. So far we've gotten away with this by luck, but recent u-boot changes have shifted the stack start address by 16 bytes, which combined with dma alignment now exposes this problem. Since we end up just busy waiting for the dma engine anyway, this commit fixes things by simply removing the dma code, resulting in smaller bug-free code. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | Merge branch 'u-boot-microblaze/zynq' into 'u-boot-arm/master'Albert ARIBAUD2014-07-26-0/+2
| |\ \
| | * | ARM: zynq: Enable generic board for Xilinx ZynqMichal Simek2014-07-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable CONFIG_SYS_GENERIC_BOARD for all Zynq boards. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Tested-by: Masahiro Yamada <yamada.m@jp.panasonic.com> [on ZC706 board]
| * | | dm: Add dm_scan_other() to locate board-specific devicesSimon Glass2014-07-23-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some boards will have devices which are not in the device tree and do not have platform data. They may be programnatically created, for example. Add a hook which boards can use to bind those devices early in boot. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Add child_pre_probe() and child_post_remove() methodsSimon Glass2014-07-23-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some devices (particularly bus devices) must track their children, knowing when a new child is added so that it can be set up for communication on the bus. Add a child_pre_probe() method to provide this feature, and a corresponding child_post_remove() method. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Introduce per-child data for devicesSimon Glass2014-07-23-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some device types can have child devices and want to store information about them. For example a USB flash stick attached to a USB host controller would likely use this space. The controller can hold information about the USB state of each of its children. The data is stored attached to the child device in the 'parent_priv' member. It can be auto-allocated by dm when the child is probed. To do this, add a per_child_auto_alloc_size value to the parent driver. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Add functions to access a device's childrenSimon Glass2014-07-23-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Devices can have childen that can be addressed by a simple index, the sequence number or a device tree offset. Add functions to access a child in each of these ways. The index is typically used as a fallback when the sequence number is not available. For example we may use a serial UART with sequence number 0 as the console, but if no UART has sequence number 0, then we can fall back to just using the first UART (index 0). The device tree offset function is useful for buses, where they want to locate one of their children. The device tree can be scanned to find the offset of each child, and that offset can then find the device. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Provide a function to scan child FDT nodesSimon Glass2014-07-23-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At present only root nodes in the device tree are scanned for devices. But some devices can have children. For example a SPI bus may have several children for each of its chip selects. Add a function which scans subnodes and binds devices for each one. This can be used for the root node scan also, so change it. A device can call this function in its bind() or probe() methods to bind its children. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Tidy up some header file commentsSimon Glass2014-07-23-6/+13
| | | | | | | | | | | | | | | | | | | | | | | | Fix up the style of a few comments and add/clarify a few others. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | fdt: Add a function to get the node offset of an aliasSimon Glass2014-07-23-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | This simple function returns the node offset of a named alias. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Allow a device to be found by its FDT offsetSimon Glass2014-07-23-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each device that was bound from a device tree has an node that caused it to be bound. Add functions that find and return a device based on a device tree offset. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Introduce device sequence numberingSimon Glass2014-07-23-0/+83
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In U-Boot it is pretty common to number devices from 0 and access them on the command line using this numbering. While it may come to pass that we will move away from this numbering, the possibility seems remote at present. Given that devices within a uclass will have an implied numbering, it makes sense to build this into driver model as a core feature. The cost is fairly small in terms of code and data space. With each uclass having numbered devices we can ask for SPI port 0 or serial port 1 and receive a single device. Devices typically request a sequence number using aliases in the device tree. These are resolved when the device is probed, to deal with conflicts. Sequence numbers need not be sequential and holes are permitted. At present there is no support for sequence numbers using static platform data. It could easily be added to 'struct driver_info' if needed, but it seems better to add features as we find a use for them, and the use of -1 to mean 'no sequence' makes the default value somewhat painful. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | fdt: Add a function to get the alias sequence of a nodeSimon Glass2014-07-23-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Aliases are used to provide U-Boot's numbering of devices, such as: aliases { spi0 = "/spi@12330000"; } spi@12330000 { ... } This tells us that the SPI controller at 12330000 is considered to be the first SPI controller (SPI 0). So we have a numbering for the SPI node. Add a function that returns the numbering for a node assume that it exists in the list of aliases. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | Add a flag indicating when the serial console is readySimon Glass2014-07-23-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For sandbox we have a fallback console which is used very early in U-Boot, before serial drivers are available. Rather than try to guess when to switch to the real console, add a flag so we can be sure. This makes sure that sandbox can always output a panic() message, for example, and avoids silent failure (which is very annoying in sandbox). Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | stdio: Provide functions to add/remove devices using stdio_devSimon Glass2014-07-23-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current functions for adding and removing devices require a device name. This is not convenient for driver model, which wants to store a pointer to the relevant device. Add new functions which provide this feature and adjust the old ones to call these. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Support driver model prior to relocationSimon Glass2014-07-23-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Initialise devices marked 'pre-reloc' and make them available prior to relocation. Note that this requires pre-reloc malloc() to be available. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Allow drivers to be marked 'before relocation'Simon Glass2014-07-23-5/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Driver model currently only operates after relocation is complete. In this state U-Boot typically has a small amount of memory available. In adding support for driver model prior to relocation we must try to use as little memory as possible. In addition, on some machines the memory has not be inited and/or the CPU is not running at full speed or the data cache is off. These can reduce execution performance, so the less initialisation that is done before relocation the better. An immediately-obvious improvement is to only initialise drivers which are actually going to be used before relocation. On many boards the only such driver is a serial UART, so this provides a very large potential benefit. Allow drivers to mark themselves as 'pre-reloc' which means that they will be initialised prior to relocation. This can be done either with a driver flag or with a 'dm,pre-reloc' device tree property. To support this, the various dm scanning function now take a 'pre_reloc_only' parameter which indicates that only drivers marked pre-reloc should be bound. Signed-off-by: Simon Glass <sjg@chromium.org>
| * | | dm: Provide a way to shut down driver modelSimon Glass2014-07-23-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a new method which removes and unbinds all drivers. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-08-20 22:41:58 +0000