summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* mx6qsabreauto: Use ttymxc3 as consoleOtavio Salvador2012-10-15-3/+7
| | | | | | | | The mx6qsabreauto console is different than mx6qsabresd so the console configuration is now set in the board file. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
* mx5/6: Define default SoC input clock frequenciesBenoît Thébaudeau2012-10-15-21/+0
| | | | | | | | | | | Define default SoC input clock frequencies for i.MX5/6 in order to get rid of duplicated definitions. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Jason Liu <r64343@freescale.com> Cc: Matt Sealey <matt@genesi-usa.com> Cc: Fabio Estevam <fabio.estevam@freescale.com>
* mx6q: Add basic support for mx6qsabreautoFabio Estevam2012-10-15-0/+20
| | | | | | | | | | | | | | | | | | | | | | mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* configs: mx6: Add a common config fileFabio Estevam2012-10-15-164/+185
| | | | | | Add a common mx6 config file that can be shared between some mx6 boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* mx6qsabresd: Add Ethernet supportFabio Estevam2012-10-15-2/+15
| | | | | | | | | | | | | | mx6qsabresd has a AR8031 Gigabit PHY. Add support for it. Also increase CONFIG_SYS_MALLOC_LEN so that FEC buffer allocation does not fail. Tested on 1Gbp and 100Mbps networks. Suggested-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mx6: Add basic support for mx6qsabresd board.Fabio Estevam2012-10-15-0/+170
| | | | | | | | | | | | | | | | | mx6qsabresd is a board based on mx6q SoC with the following features: - 1GB of DDR3 - 1 USB OTG port - 1 HDMI output port - SPI NOR - LVDS panel - Gigabit Ethernet - Camera Connector - eMMC and SD card slot - Audio Add very basic support for it. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* tegra: enable CONFIG_CMD_PARTStephen Warren2012-10-15-0/+11
| | | | | | | | This is extremely likely to be used from the boot.scr that Tegra's default bootcmd locates and executes. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Tegra20: Move some include files to arch-tegra for sharing with Tegra30Tom Warren2012-10-15-1/+1
| | | | | | | | | | | The move is pretty straight-forward. ap20.h and tegra20.h were renamed to ap.h and tegra.h. Some files remain in arch-tegra20 but 'include' a file in 'arch-tegra' with #defines & structs that will be common between T20 and T30 HW. HW-specific #defines, etc. stay in the 'arch-tegra20' 'root' file. All boards build OK w/MAKEALL -s tegra20. Checkpatch.pl runs clean. Seaboard works OK. Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: Rename Medcom to Medcom-WideThierry Reding2012-10-15-4/+4
| | | | | | | | | | Medcom is the marketing name for an older, PXA-based version of the same device. In order to avoid confusion, rename the Tegra-based version to the new marketing name. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* input: Allow key ghosting filter to be disabledSimon Glass2012-10-15-1/+4
| | | | | | | Some keyboards will not need a key ghosting filter, so make this feature optional. Signed-off-by: Simon Glass <sjg@chromium.org>
* input: Separate out keyboard repeat/delay from initSimon Glass2012-10-15-4/+10
| | | | | | | | | | | It is inconvenient to have to specify the keyboard repeat and delay at init time if it is not yet available, so move this into a separate function. Some drivers will want to do this when their keyboard init routine is actually called. Signed-off-by: Simon Glass <sjg@chromium.org>
* sata.h: Make all sata/ata drivers include <sata.h>Pavel Herrmann2012-10-15-2/+5
| | | | | | | | | | - block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt not ulong. - We also move the extern of sata_dev_desc into <sata.h> - Remove now duplicate declarations from driver-specific headers. Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Pavel Herrmann <morpheus.ibis@gmail.com>
* ide.h: Make ide_(read|write) match block_dev_desc_t block_(read|write)Tom Rini2012-10-15-2/+2
| | | | | | | block_dev_desc_t says that block_(read|write) take lbaint_t for blkcnt not ulong Signed-off-by: Tom Rini <trini@ti.com>
* usb.h: Add udc_disconnect prototype to usb.hLukasz Dalek2012-10-15-0/+11
| | | | | | | PXA25x gadget implements common function usb_disconnect(). This patch adds this function prototype into usb.h for boards using it. Signed-off-by: Lukasz Dalek <luk0104@gmail.com>
* usb: ulpi: add indicator configuration functionLucas Stach2012-10-15-2/+11
| | | | | | | | | | | Allows for easy configuration of the VBUS indicator related ULPI config bits. Also move the external indicator setup from ulpi_set_vbus() to the new function. Signed-off-by: Lucas Stach <dev@lynxeye.de> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* usb: lowlevel interface change to support multiple controllersLucas Stach2012-10-15-4/+8
| | | | | | | | | | | Carry an index in the lowlevel usb functions to make specify the respective usb controller. Also pass through an controller struct from lowlevel_init to the creation of the root usb device of this controller. Signed-off-by: Lucas Stach <dev@lynxeye.de> Reviewed-by: Marek Vasut <marex@denx.de>
* ppc4xx: Remove AP1000 board supportStefan Roese2012-10-15-249/+2
| | | | | | | | | As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: James MacAulay <james.macaulay@amirix.com> Acked-by: Marek Vasut <marex@denx.de>
* ppc4xx: Remove ML2 board supportStefan Roese2012-10-15-257/+0
| | | | | | | | | As the board seems to be unmaintained for some time, lets remove the support in mainline completely. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Peter De Schrijver <p2@mind.be> Acked-by: Marek Vasut <marex@denx.de>
* ppc4xx: Remove IOP480 supportStefan Roese2012-10-15-400/+1
| | | | | | | | | | Since the IOP480 (PPC401/3 variant from PLX) is only used on 2 boards that are not actively maintained, lets remove support for it completely. This way the ppc4xx code will get a bit cleaner. Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu> Acked-by: Marek Vasut <marex@denx.de>
* serial: Remove CONFIG_SERIAL_MULTI from remaining sourcesMarek Vasut2012-10-15-13/+1
| | | | | | | | | | | | Remove the parts depending either on disabled CONFIG_SERIAL_MULTI or ifdefs around CONFIG_SERIAL_MULTI parts since CONFIG_SERIAL_MULTI is now enabled by default. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: Remove CONFIG_SERIAL_MULTI from config filesMarek Vasut2012-10-15-53/+0
| | | | | | | | | | | | | Remove any notion of CONFIG_SERIAL_MULTI from board config files. Since CONFIG_SERIAL_MULTI is now enabled by default, it is useless to specify this config option in the board config files. Therefore remove it. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* serial: bfin: Flip the jtag serial console to CONFIG_SERIAL_MULTIMarek Vasut2012-10-15-1/+1
| | | | | | | | | | | | | | | | | | | Rework the emulation of serial console via JTAG from simple ad-hoc implementation of serial port routines to CONFIG_SERIAL_MULTI and enable CONFIG_SERIAL_MULTI unconditionally for blackfin. In order for the JTAG serial console to take precedence over all other serial ports available in system, implement override for default_serial_console call returning this JTAG serial console. This brings in a bit of a growth of size, but eventually will allow us to unconditionally enable CONFIG_SERIAL_MULTI throughout the whole U-Boot and maintain only one serial subsystem. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* serial: zoom2: Remove zoom2 serial prototypes from serial.hMarek Vasut2012-10-15-8/+1
| | | | | | | | | | | | | | Remove the prototypes for zoom2_serial_deviceN from serial.h . This can't be done right away, as they are referenced from the zoom2 config file. Therefore, adjust the code so the config file only specifies number of the port. Then, replace the simple return in default_serial_console() with a switch across possible values, which returns the zoom2_serial_deviceN . With such adjustment in place, the exported prototypes in serial.h can be safely removed. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: bfin: Adjust serial_register_bfin_uart()Marek Vasut2012-10-15-4/+0
| | | | | | | | | | | | Rename the serial_register_bfin_uart() to bfin_initialize_serial() to be consistent with the rest of the naming. Next, remove it's prototype from serial.h and properly insert it into serial.c as the rest of the serial initialization functions. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* serial: bfin: Remove the bfin_serialN_device exports from serial.hMarek Vasut2012-10-15-4/+0
| | | | | | | | | | | | Remove the exports from serial.h as they are only used in the blackfin serial driver. Furthermore, they are only used for registration, which is handled already inside that driver and default_serial_port() call, which is also handled in that driver. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Mike Frysinger <vapier@gentoo.org>
* serial: ns16550: Move serial registration from serial_initialize()Marek Vasut2012-10-15-6/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Move the registration of eserialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented ns16550_serial_initialize() function, which is implemented inside of the ns16550 serial driver allows encapsulation of eserialN_device within the ns16550 serial driver itself. Also, remove the exports of eserialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the ns16550 serial driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu>
* serial: mpc512x: Move serial registration from serial_initialize()Marek Vasut2012-10-15-7/+0
| | | | | | | | | | | | | | | | | | | | | | | Move the registration of serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented mpc512x_serial_initialize() function, which is implemented inside of the mpc512x serial driver allows encapsulation of serialN_device within the mpc512x serial driver itself. Also, remove the exports of serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the mpx512x serial driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: microblaze: Move serial registration from serial_initialize()Marek Vasut2012-10-15-7/+0
| | | | | | | | | | | | | | | | | | | | | | Move the registration of xuartlite_serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented xuartlite_serial_initialize() function, which is implemented inside of the serial_xuartlite driver allows encapsulation of xuartlite_serialN_device within the serial_xuartlite driver itself. Also, remove the exports of xuartlite_serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the serial_xuartlite driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Michal Simek <monstr@monstr.eu>
* serial: zynq: Move serial registration from serial_initialize()Tom Rini2012-10-15-5/+0
| | | | | | | | | | | | | | | | | | | Move the registration of zynq_serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented zynq_serial_initialize() function, which is implemented inside of the serial_zynq driver allows encapsulation of zynq_serialN_device within the serial_zynq driver itself. Also, remove the exports of zynq_serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the serial_zynq driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Tom Rini <trini@ti.com>
* serial: s5p: Move serial registration from serial_initialize()Marek Vasut2012-10-15-7/+0
| | | | | | | | | | | | | | | | | | | | | | Move the registration of s5p_serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented s5p_serial_initialize() function, which is implemented inside of the serial_s5p driver allows encapsulation of s5p_serialN_device within the serial_s5p driver itself. Also, remove the exports of s5p_serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the serial_s5p driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
* serial: pxa: Move serial registration from serial_initialize()Marek Vasut2012-10-15-4/+0
| | | | | | | | | | | | | | | | | | | | | Move the registration of serial_XXuart ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented pxa_serial_initialize() function, which is implemented inside of the serial_pxa driver allows encapsulation of serial_XXuart within the serial_pxa driver itself. Also, remove the exports of serial_XXuart from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the serial_pxa driver and the default console is picked by CONFIG_CONS_IDX macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: s3c24xx: Move serial registration from serial_initialize()Marek Vasut2012-10-15-6/+0
| | | | | | | | | | | | | | | | | | | | | | Move the registration of s3c24xx_serialN_device ports from default serial_initialize() into driver specific function called from serial_initialize(). This slims down the serial_initialize() call to a bare tracker of all possible serial port registration routines in U-Boot. The newly implemented s3c24xx_serial_initialize() function, which is implemented inside of the serial_s3c24xx driver allows encapsulation of s3c24xx_serialN_device within the serial_s3c24xx driver itself. Also, remove the exports of s3c24xx_serialN_device from include/serial.h as they are no longer needed. This is simply because the implementation of default_serial_console() is wrapped into the serial_s3c24xx driver and the default console is picked by CONFIG_SERIAL<N> macro in config file. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: C Nauman <cnauman@diagraph.com>
* serial: mpc512x: Properly define CONFIG_SYS_PSC3 in config filesMarek Vasut2012-10-15-0/+3
| | | | | | | | | | | | | Some of the boards using the mpc512x serial driver didn't properly define which PSC console to use. This caused breakage when building with CONFIG_SERIAL_MULTI enabled. Fix this by defining the default PSC console. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de>
* serial: pxa: Make use of default_serial_console in serial_pxaMarek Vasut2012-10-15-1/+10
| | | | | | | | | | Make use of the newly implemented weak default_serial_console in the serial_pxa driver. This removes all reimplementations of this function from board files. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* serial: Rename .init() and .uninit() in serial_deviceMarek Vasut2012-10-15-2/+2
| | | | | | | | | | | | Rename .init() to .start() and .uninit() to .stop() in struct serial_device. This allows aligning struct serial_device with closer to struct stdio_dev. The real goal here is to allow these two structures to converge together and eventually make one to be a superset of the other. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Tom Rini <trini@ti.com>
* serial: Coding style cleanup of struct serial_deviceMarek Vasut2012-10-15-12/+11
| | | | | | | | | Do a simple cleanup of the struct serial_device and align it with current coding style. Checkpatch now reports no errors. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Tom Rini <trini@ti.com>
* COMMON: Use __stringify() instead of rest of implementationsMarek Vasut2012-10-15-15/+9
| | | | | | | Fix up the rest of implementations of __stringify(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* COMMON: Use __stringify() instead of MK_STR()Marek Vasut2012-10-15-395/+395
| | | | | | | | | Kill multiple occurances and redeclaration of MK_STR in favor of __stringify(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* COMMON: Use __stringify() instead of xstr()Marek Vasut2012-10-15-147/+104
| | | | | | | Kill multiple occurances and redeclaration of xstr in favor of __stringify(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* COMMON: Add __stringify() functionMarek Vasut2012-10-15-0/+13
| | | | | | | | | | | | | Copied from Linux kernel: commit 8f7c2c37319a81ef4c2bfdec67b1ccd5744d97e4 Date: Wed Apr 8 16:58:57 2009 +0800 Pull in the __stringify() macro from Linux kernel. This macro is usually used to convert numbers to strings at preprocessor level, yet it is not limited only to that. This is useful as it allows higher usage of puts() in favour of printf(). Signed-off-by: Marek Vasut <marex@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* gth2: Remove this platformTom Rini2012-10-15-222/+0
| | | | | | | After taking with the former maintainer, delete this platform. The patch is from the former maintainer. Signed-off-by: Tom Rini <trini@ti.com>
* m28: Properly configure the SPI flash chipselectMarek Vasut2012-10-12-3/+5
| | | | | | | | | | The SPI flash is not properly detected by plain "sf probe" due to it being located on different bus and different chipselect. Fix this problem. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@ti.com>
* ide: Correct IDE_BUS(dev) macroLuka Perkov2012-10-08-1/+1
| | | | | | | | | | | | | | The IDE_BUS(dev) macro was previously doing dev >> 1. This however is a mis-match of the usage in common/cmd_ide.c and would cause boards with multiple ports / devices to not correctly detect all devices. For more details please see: http://lists.denx.de/pipermail/u-boot/2012-April/122525.html [Tom Rini: Reword commit message only] Tested-by: Luka Perkov <uboot@lukaperkov.net> Signed-off-by: Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Tom Rini <trini@ti.com>
* ml507: Fix Xilinx uartlite driver hangRommel Custodio2012-10-08-1/+1
| | | | | | | | | | | The default configuration for ml507 will generate a hang() in the Xilinx uartlite driver. userial_ports[] in drivers/serial/serial_xuartlite.c does not get initialized properly. CONFIG_SERIAL_BASE is unused. XILINX_UARTLITE_BASEADDR is used instead. Signed-off-by: Rommel Custodio <sessyargc+uboot@gmail.com>
* MPC85xx: remove support for TQM85xx boardsWolfgang Denk2012-10-05-697/+0
| | | | | | | | | | | | Due to grown code sizes the TQM85xx boards don't build any more with some older tool chains (like ELDK 4.2). As these boards have long reached EOL it seems a waste of effort trying to fix them. The vendor has agreed to drop support for them, too. So let's get rid of them. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> cc: Kim Phillips <kim.phillips@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2012-10-04-53/+1514
|\
| * ARM: Add Altera SOCFPGA Cyclone5Dinh Nguyen2012-10-04-0/+236
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add minimal support for Altera's SOCFPGA Cyclone 5 hardware. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Chin Liang See <clsee@altera.com> Signed-off-by: Pavel Machek <pavel@denx.de> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Tom Trini <trini@ti.com> Cc: Wolfgang Denx <wd@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Stefan Roese <sr@denx.de> ---- v8: Remove no_return attribute for reset_cpu Based on v2012.10-rc2
| * xilinx: Add new Zynq boardMichal Simek2012-10-04-0/+112
| | | | | | | | | | | | | | | | Add support for Xilinx Zynq board. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Marek Vasut <marex@denx.de> CC: Joe Hershberger <joe.hershberger@gmail.com>
| * serial: Add Zynq serial driverMichal Simek2012-10-04-0/+5
| | | | | | | | | | | | | | | | | | The driver is used on Xilinx Zynq platform. Signed-off-by: Michal Simek <monstr@monstr.eu> CC: Joe Hershberger <joe.hershberger@gmail.com> CC: Marek Vasut <marex@denx.de> Acked-by: Marek Vasut <marex@denx.de>
| * ARM: Add X600 board support (SPEAr600 based)Stefan Roese2012-10-04-0/+339
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the X600 SPEAr600 based board. Its also the first SPEAr600 board that uses the newly introduced SPEAr600 SPL support. Xloader is not necessary any more. By using the new "u-boot.spr" make target, one image will generated containing both, U-Boot SPL (with mkimage header as needed by the SPEAr BootROM, and the main U-Boot with mkimage header. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Amit Virdi <amit.virdi@st.com> Cc: Vipin Kumar <vipin.kumar@st.com>