| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
| |
Abstracted the CSF size in imximage from a hardcoded value to a config
setting CONFIG_CSF_SIZE. This configuration is only enabled for secure
boot.
Increased the size of the CSF default allocation to 0x4000. This size
covers the event the worst case of 4906-bits keys.
|
|
|
|
|
|
| |
For nand boot, the mtdpart info are needs to load kernel and rootfs.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
Since the flash blocks are locked at default , need to set
"CONFIG_SYS_FLASH_PROTECTION" to unlock them before write/erase.
The patch also add the pinmux for LBA (ADV) pin and set eimnor enabled at
default.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since there is another 9x9 package for mx6ul, modify the BSP names
of ddr3 arm2 board and evk board to add 14x14 package info.
Also modify the loaded dtb file to align with kernel.
After the change, the build target for mx6ul ddr3 arm2 board is:
mx6ul_14x14_ddr3_arm2_config
and the build target for mx6ul evk board is:
mx6ul_14x14_evk_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
Add the default TSOP NAND support and build target.
New build target for nand boot: mx7d_19x19_lpddr3_arm2_nand_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
Include fb.h in mxsfb.h.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add mx7d_19x19_lpddr3_arm2 target board supprt
* Enable i2c, spinor, usb, usdhc, qspi, enet, uart
* Build targets
mx7d_19x19_lpddr3_arm2_defconfig
mx7d_19x19_lpddr3_arm2_eimnor_defconfig
- Set EIMNOR settings for Intel Sibley Asynchronous mode
- Set flash sector size for 256kb (erase block size)
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
Use pmic framework to simplify code and make code clean.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
| |
Add android features booti, fastboot and recovery to i.MX6UL EVK board.
Since there is no user button on the board, we can't implement
the recovery by using button.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Since the NAND has two pins conflict with SD2, when NAND is enabled, we
must disable SD2. So the CONFIG_SYS_FSL_USDHC_NUM needs configure to 1
and should be moved to under defining CONFIG_SYS_USE_NAND.
New build target for NAND boot:
mx6ul_ddr3_arm2_nand_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
Correct the EIMNOR settings to non-mux mode and set the environment
variables configuration to FLASH when using WEIMNOR boot.
New target is added for build WEIMNOR boot u-boot:
mx6ul_ddr3_arm2_eimnor_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
Move CONFIG_IMX_THERMAL to mx6_common.h
Make CONFIG_MXC_OCOTP only depends on CONFIG_CMD_FUSE, since when
THERMAL is not implemented, we may use fuse.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add board code for mx6ul ddr3 arm2 board.
QSPI, USDHC, ENET, USB, VIDEO, SPINOR, EIMNOR
Add sd1, qspi and spinor boot support
DDR script is 1.02 version.
Signed-off-by: Fugang Duan <b38611@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes to support modules on the board:
I2C, SD/eMMC, NAND, QSPI, FEC1/FEC2, USB, LCDIF, 74LV, Serial
DDR version: 1.0
Build target: mx6ulevk_config
mx6ulevk_qspi1_config
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since the system counter driver will also be used by mx6ul, move
this timer driver to imx-common and rename it as syscounter.c
For mx6ul and mx7, configurations are used for choose the GPT timer
or system counter timer (default).
GPT timer: CONFIG_GPT_TIMER
System counter timer: CONFIG_SYSCOUNTER_TIMER
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
We should not rely on pfuze_common_init to set the voltage,
may be we should remove the voltage settings in pfuze_common_init.
This patch is to setting the voltages in power_init_board.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Move VIDEO config to the front of EPDC
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Enable thermal for mx7dsabresd board.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add mx7d_12x12_ddr3_arm2 target board support
* Initial support for mx7d_12x12_ddr3_arm2 target
board add support for base hardware eMMC, SD and
ECSPI boot.
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 51d69f7996cc6e6da8bb3f0af751549cb2435e44)
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
| |
* Allow to override mtest settings for target board
variants that differs on physical sdram memory size
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 6173a3954b83ce22e24c62bc8ee922007b0929a6)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ARM errata 751472, 794072, 761320, 845369 only applied
to the following configuration:
This erratum affects configurations with either:
- One processor if the ACP is present
- Two or more processors
i.MX6 family does not have the ACP and thus only the MPCore system
will be impacted, which are the i.MX6DQ, i.MX6DL, and i.MX6QP.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
(cherry picked from commit 0db960784ba4f631ee5c0321b5d25f3b1ac55640)
|
|
|
|
|
|
|
|
|
|
| |
Under very rare timing circumstances, transitioning into streaming
mode might create a data corruption. Present on Two or more processors
or 1 core with ACP, all revisions. This erratum can be worked round
by setting bit[22] of the undocumented Diagnostic Control Register to 1.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
(cherry picked from commit 70ad44e523680de67dd8b7a7505d7f27799980ee)
|
|
|
|
|
|
|
| |
add this parameter in u-boot as a temporary workaround.
Signed-off-by: Han Xu <b45815@freescale.com>
(cherry picked from commit f0beee980914360c8783406ef8694974467eb07b)
|
|
|
|
|
|
|
|
| |
The mx7dsabresd uses new LCD TFT43AB which has 480 x 272 pixels.
Update panel info for this LCD.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit e77d667b20956a37de9d367a8914ef2fe79258df)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To enable the EPDC feature:
1. Uncomments CONFIG_SPLASH_SCREEN and CONFIG_MXC_EPDC settings
in mx7dsabresd.h
2. cd <kernel_dir>/firmware/imx
3. python ihex2bin.py -i epdc_ED060XD4C1_TC.fw.ihex -o epdc_splash.bin
4. cp epdc_splash.bin to [FAT partition on SD card]
Since the EPDC has pinmux conflicts with ENET and QSPI. These two
modules can't work at same time.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 8ba7f88f9efac9f90319b71644d3d1191f535d03)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To enable the EPDC feature:
1. Uncomments CONFIG_SPLASH_SCREEN and CONFIG_MXC_EPDC settings
in mx7d_12x12_lpddr3_arm2.h
2. cd <kernel_dir>/firmware/imx
3. python ihex2bin.py -i epdc_ED060XD4C1_TC.fw.ihex -o epdc_splash.bin
4. cp epdc_splash.bin to [FAT partition on SD card]
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 414824dcb77a067213849d340cf92777e6546810)
|
|
|
|
|
|
|
|
| |
To support EPDC V2 on mx7d, update the mxc_epdc_fb.h for new registers
layout.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 04588deb8ad368e77ec3563aa012a520faa6cade)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change to load EPDC waveform from FAT partition and allocate waveform
buffer, framebuffer and working buffer in dynamic manner not static.
So many EPDC configurations are removed.
To enable the EPDC feature, must define CONFIG_MXC_EPDC and CONFIG_SPLASH_SCREEN.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 4d55a4124be3a3a6288c3c845d17fd9d4f2b8b43)
Conflicts:
include/configs/mx6slevk.h
|
|
|
|
|
|
|
|
|
|
|
| |
This commit 155fa9af95ac5be857a7327e7a968a296e60d4c8
"spi: mxc: fix sf probe when using mxc_spi"
introduces "board_spi_cs_gpio" function to discard gpio in
CONFIG_SF_DEFAULT_CS for spi flash.
Follow this rule to make imx boards work fine.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Add CONFIG_DEFAULT_FDT_FILE macro and PHYS_SDRAM_SIZE.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since i.MX6QP changes some CCM registers, so modify the clocks settings to
follow the hardware changes.
A new CONFIG_MX6QP is introduced here and is used for the CCM difference.
At default CONFIG_MX6Q is enabled along with the CONFIG_MX6QP.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 5e4d1537ce9a476c8404126350f05d8976c5aa35)
Conflicts:
arch/arm/cpu/armv7/mx6/clock.c
arch/arm/include/asm/arch-mx6/crm_regs.h
include/configs/mx6_common.h
|
|
|
|
|
|
|
| |
Upgrade to upstream way, using power_init_board.
Add pfuze300 support.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Add CONFIG_CMD_FASTBOOT
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
Change QSPI FLASH vendor config from to MACRONIX, otherwise the flash
device can't be recognized.
Also change default sf probe parameter to 0:0 which means bus 0, cs 0.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit f250cf69571851eb092252275418daf8de11a68e)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update board codes to support GPMI NAND flash. Since the GPMI NAND needs
board rework, it is disabled at default. Two ways to enable GPMI NAND:
1. Define CONFIG_SYS_BOOT_NAND for NAND boot case
2. Modify the line 306 in mx7dsabresd.h from QSPI to NAND.
#define CONFIG_SYS_USE_QSPI /* Enable the QSPI flash at default */
to
#define CONFIG_SYS_USE_NAND /* Enable the NAND flash at default */
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 5db03facf3add6a95728bc97ac2300003a103932)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable android fastboot, recovery, booti features for mx7d sabresd
board by using new build target: mx7devkandroid_config
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit bfc2b467ddac9c6eccb3f39aad3663a959546b64)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When booting in eMMC fast boot, the uboot v2013.04 always hangs.
The root cause is that MMC host does not exit from boot mode after
bootrom loading image. So the first command 'CMD0' sent
in uboot will pull down the CMD line to low and cause errors.
This patch cleans the MMC boot register in "mmc_init" to put the
MMC host back to normal mode.
Signed-off-by: Ye Li <b37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
(cherry picked from commit 2ead2f9501c6d2571e0f5365bd808ed7c73257ef)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
drivers/mmc/fsl_esdhc.c
|
|
|
|
|
|
|
|
|
| |
Update driver codes and registers define for MX7. Implement udc callback
function in MX7 arch.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit e55c4f7bf5a66b34c2d01c42bac667cb3789b0c1)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add udc and fastboot support
We did not use the upstream way.
Currently use CI_UDC and USB_GAGDET of upstream can make fastboot work,
but lack of flash operation, so we still use our way.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
LCD_MONOCHROME is removed in commit f4469f50b0367820121ef2d313517d422ed70e1d.
Add related code back to support epdc.
In this patch, also include crm_regs.h in mx6slevk.c to make epdc code
be compiled ok.
COLOR_MASK is also added from commit a7de2953f51e70754190d3516167d58d27d17219
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Add thermal driver for mx7
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Change macro name to make driver support more platforms.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add i.MX7D SABRESD board BSP codes, with enabled modules:
UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX.
Build target: mx7dsabresd_config
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 3bf52a153e2964d4fdc17f0e8cb816686cbb6c2b)
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes, configuration head file and build target for
19x19 DDR3L ARM2 board with basic functions:
ENET2, I2C, SD/eMMC/MMC, USB, QSPI, ECSPI, pfuze3000 PMIC.
Build target: mx7d_19x19_ddr3_arm2_config
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 58fd869e3097b7461fbfae3d94e3ebbd30ae2474)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes, configuration head file and build target for
12x12 LPDDR3 ARM2 board with basic functions:
ENET, I2C, SD/eMMC/MMC, USB, LCD Splash screen, QSPI, ECSPI,
pfuze3000 PMIC.
Note: pmic and video is still not upstream way
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit ac0d51ef07fdec880e6da318c08d521506640efa)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
| |
Add mx7d_arm2.h for common part of all i.MX7D arm2 boards
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 6cc15cf8c4e1f9a08130c5e232f23af75407fa50)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
| |
Add common head file mx7_common.h for all i.MX7 platform
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit e38c9a7a543890e0879f89627a3f404d8068d602)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
| |
Add bsp and configuration file
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
| |
Add bsp and configuration file
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Update bsp and add configuration file
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|