summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* add weak entry definitionDavid Feng2014-01-09-0/+4
| | | | Signed-off-by: David Feng <fenghua@phytium.com.cn>
* Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-01-08-237/+7
|\
| * arm: omap: cm_t35: enable gpio bank 5 clocks explicitlyNikita Kiryanov2014-01-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Following commit "arm: omap3: Enable clocks for peripherals only if they are used" (f33b9bd3984fb11e1d8566a866adc5957b1e1c9d) it is now necessary to enable clocks for GPIO banks explicitly. On cm_t35, GPIO bank 5 is necessary for scf0403 lcd support. Enable GPIO bank 5 clocks. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Tom Rini <trini@ti.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
| * ARM: twister: add missing gpio clock initJeroen Hofstee2014-01-07-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Commit f33b9bd3984fb11e1d8566a866adc5957b1e1c9d breaks boards which do not explicitly enable the gpio clocks. This causes the twister spl to hang, since it uses the no longer enabled gpio 55. Add CONFIG_OMAP3_GPIO_2 to unbrick the board. Cc: Stefano Babic <sbabic@denx.de> Cc: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Stefano Babic <sbabic@denx.de>
| * ARM: tam3517-common: fix nand spl bootJeroen Hofstee2014-01-07-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit f9095aac793aa8917ab9b915c5d449e6dc8d3d30, "mtd: nand: omap: add CONFIG_NAND_OMAP_ECCSCHEME for selection of ecc-scheme" removed CONFIG_SPL_NAND_SOFTECC from the tam3517 common config, causing the spl nand boot to fail. Add it back, so derived boards boot again. Cc: Pekon Gupta <pekon@ti.com> Cc: Scott Wood <scottwood@freescale.com> Cc: Raphael Assenat <raph@8d.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tapani Utriainen <tapani@technexion.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> Acked-by: Stefano Babic <sbabic@denx.de>
| * TI:omap3: Drop omap3_zoom2Tom Rini2014-01-07-237/+0
| | | | | | | | | | | | | | The omap3_zoom2 board has not been updated for a correct CONFIG_SYS_HZ and Tom Rix's email has long been bouncing. Signed-off-by: Tom Rini <trini@ti.com>
| * cam_enc_4xx: Set CONFIG_SYS_NAND_MAX_OOBFREE / CONFIG_SYS_NAND_MAX_ECCPOSTom Rini2014-01-07-0/+2
| | | | | | | | | | | | | | | | | | | | With the changes to make OOBFREE/ECCPOS configurable but default to larger, we need to set these config options for the space savings they provide. Cc: Scott Wood <scottwood@freescale.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* | arm/km: fix i2c mux define for km_kirkwood_128m16 targetHolger Brunck2014-01-06-1/+1
| | | | | | | | | | | | | | | | Due to the i2c mux rework in u-boot we now have only to specify the busnumber and not the whole mux configuration. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Acked-by: Heiko Schocher <hs@denx.de>
* | arm/km: add support for km_kirkwood_128m16 boardKarlheinz Jerg2014-01-06-0/+10
| | | | | | | | | | | | | | | | | | | | The board is similar to the standard km_kirkwood board. From a u-boot point of view, the only difference is an increased 256 MiB DRAM (128M16). A board based on this design is for example the SUP12. Signed-off-by: Karlheinz Jerg <karlheinz.jerg@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* | kirkwood: ib62x0: use device tree and update configLuka Perkov2014-01-06-15/+23
|/ | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> CC: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
* Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2014-01-06-278/+356
|\
| * board:trats2: fix default partitions and mmc envPiotr Wilczek2013-12-31-1/+2
| | | | | | | | | | | | | | | | | | This patch add uuid disk to defualt partions necessary to restore gpt partitions and fixes mmcdev environmental variable. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * SPL: EXYNOS: Prepare for variable size SPL supportRajeshwari Birje2013-12-30-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When variable size SPL is used, the BL1 expects the SPL to be encapsulated differently: instead of putting the checksum at a fixed offset in the SPL blob, prepend the blob with a header including the size and the checksum. The enhancements include - adding a command line option, '--vs' to indicate the need for the variable size encapsulation - padding the fixed size encapsulated blob with 0xff instead of random memory contents - do not silently truncate the input file, report error instead - no need to explicitly closing files/freeing memory, this all happens on exit; removing cleanups it makes code clearer - profuse commenting - modify Makefile to allow enabling the new feature per board Signed-off-by: Vadim Bendebury <vbendeb@chromium.org> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Config: Add initial config for SMDK5420Rajeshwari Birje2013-12-30-280/+347
| | | | | | | | | | | | | | | | | | | | Adding initial config for SMDK5420 to build and boot U-Boot over Exynos based SMDK5420. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * Exynos5420: Add base patch for SMDK5420Rajeshwari Birje2013-12-30-0/+2
| | | | | | | | | | | | | | | | | | | | | | Adding the base patch for Exynos based SMDK5420. This shall enable compilation and basic boot support for SMDK5420. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * EXYNOS5: Create a common board fileRajeshwari Birje2013-12-30-0/+2
| | | | | | | | | | | | | | | | | | | | | | Create a common board.c file for all functions which are common across all EXYNOS5 platforms. exynos_init function is provided for platform specific code. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2014-01-06-35/+123
|\ \ | |/ |/| | | | | | | | | | | Conflicts: include/micrel.h The conflict above was trivial, caused by four lines being added in both branches with different whitepace.
| * ARM: mx6: Change the FDT loading address to avoid overlapingOtavio Salvador2014-01-03-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes allow for the DeviceTree and initrd relocation fixing the boot of FSL 3.10.9-1.0.0-alpha kernel. This changes following boards: - mx6sabreauto - mx6sabresd - wandboard - udoo - nitrogen6x - cgtqmx6eval The reasoning, as explained by Hui Liu, is: ,---- | The FDT blob will be placed at DDR physical addr: 0x11000000. When Linux kernel | Boot up, it will decompress the compressed kernel image and place the decompressed | kernel image at the low end of the DDR memory and start running from it. If the | decompressed kernel image is bigger for example than 16M, it may over written the | fdt blob which u-boot loaded to the DDR memory @0x11000000 with fdt_addr=0x11000000 | | To expand the fdt_addr from 0x11000000 to 0x18000000, which can avoid the override | Since we will not likely have one kernel image larger than 128MB. `---- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
| * mx28evk: Extend environment to easy write of NAND systemOtavio Salvador2014-01-03-1/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds following new targets: - update_nand_kernel - update_nand_fdt - update_nand_filesystem and to avoid confusion, the 'update_nand_full' has been renamed to 'update_nand_firmware_full'. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mx28evk: Add 'nandboot' environment commandOtavio Salvador2014-01-03-1/+17
| | | | | | | | | | | | | | | | | | This reads the kernel, ftd and boot into ubifs filesystem. While on that, the SD firmware filename definition has been moved next to the other SD related commands. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx28evk: Use 512k for fdt partition to align itOtavio Salvador2014-01-03-1/+1
| | | | | | | | | | | | | | | | Using 512k for fdt partition allow it to be aligned with the other small partitions and 512k erase block size. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
| * mx6: soc: Add the required LDO ramp up delayFabio Estevam2014-01-02-0/+1
| | | | | | | | | | | | | | | | | | | | When changing LDO voltages we need to wait for the required amount of time for the voltage to settle. Also, as the timer is still not available when arch_cpu_init() is called, we need to call it later at board_postclk_init() phase. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sabre_common.h: Add CONFIG_CMD_FUSE supportFabio Estevam2014-01-02-0/+5
| | | | | | | | | | | | | | Add CONFIG_CMD_FUSE option, so that the fuse API can be used. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
| * ARM: mx53: video: Add IPUv3 LCD support for M53EVKMarek Vasut2013-12-17-0/+16
| | | | | | | | | | | | | | | | This patch adds support for the AMPIRE 800x480 LCD panel that is available for M53EVK. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * ARM: mx6: Update non-Freescale boards to include CPU errata.Eric Nelson2013-12-17-0/+4
| | | | | | | | | | | | | | | | | | The CPU errata expressed in include/configs/mx6_common.h apply to all i.MX6DQ and i.MX6DLS parts. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
| * configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM optionFabio Estevam2013-12-17-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the README: "- CONFIG_SYS_SPD_BUS_NUM If SPD EEPROM is on an I2C bus other than the first one, specify here. Note that the value must resolve to something your driver can deal with." There is no SPD EEPROM on the imx boards, so ged rid of this option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
| * udoo: Add SATA support on uDoo Board.Giuseppe Pagano2013-12-17-0/+12
| | | | | | | | | | | | | | | | Add SATA support on uDoo Board. Signed-off-by: Giuseppe Pagano <giuseppe.pagano@seco.com> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
| * udoo: Add ethernet support (FEC + Micrel KSZ9031).Giuseppe Pagano2013-11-28-0/+21
| | | | | | | | | | | | | | | | | | | | Add Ethernet and networking support on uDoo board (FEC +phy Micrel KSZ9031). Ethernet speed is currently limited to 10/100Mbps. Signed-off-by: Giuseppe Pagano <giuseppe.pagano@seco.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6sabresd: Add SPI NOR supportFabio Estevam2013-11-28-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | mx6sabre board has a m25p32 SPI NOR connected to ECSPI1 port. Add support for it. This patch allows the SPI NOR flash to be succesfully detected: => sf probe SF: Detected M25P32 with page size 256 Bytes, erase size 64 KiB, total 4 MiB Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * nitrogen6x: Remove unused OCOTP optionsFabio Estevam2013-11-27-10/+0
| | | | | | | | | | | | | | | | | | OCOTP driver is currently selected via CONFIG_MXC_OCOTP option. Remove the old OCOTP related options, as they are not used anymore. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
| * configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boardsFabio Estevam2013-11-13-10/+0
| | | | | | | | | | | | | | | | There is no real benefit in adding the board name into U-boot's prompt, so remove the custom CONFIG_SYS_PROMPT definitions so that the standard "=> " prompt is used across FSL boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | ARM: AM43XX: board: add support for reading onboard EEPROMSekhar Nori2013-12-18-0/+7
| | | | | | | | | | | | | | | | Add support for reading onboard EEPROM to enable board detection. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: AM43xx: Add extra ENV settingsLokesh Vutla2013-12-18-0/+63
| | | | | | | | | | | | | | Add Extra env settings. This is derived from am335x Extra ENV settings. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: AM43xx: Add L2 SupportLokesh Vutla2013-12-18-0/+5
| | | | | | | | | | | | AM4372 uses PL310 L2 Cache. Enable the configs for the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | ARM: AM43xx: Adapt to ti_armv7_common.h config fileLokesh Vutla2013-12-18-102/+27
| | | | | | | | | | | | | | Use ti_armv7_common.h config file to inclde the common configs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* | arm: omap3: Fix beagleboard SPL boot hangup (GPIO clocks not enabled)Stefan Roese2013-12-18-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | Patch f33b9bd3 [arm: omap3: Enable clocks for peripherals only if they are used] breaks SPL booting on Beagleboard. Since some gpio input's are read to detect the board revision. But with this patch above, the clocks to the GPIO subsystems are not enabled per default any more. The GPIO banks need to be configured specifically now. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Michael Trimarchi <michael@amarulasolutions.com>
* | Merge remote-tracking branch 'u-boot-pxa/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-18-31/+30
|\ \
| * | ARM: pxa: Fix CONFIG_SYS_HZ on PXAMarek Vasut2013-12-18-23/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | The PXA incorrectly uses CONFIG_SYS_HZ, which should be 1000 across U-Boot. Fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
| * | arm: pxa: update LP-8x4x to boot DT kernelSergei Ianovich2013-12-18-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | DT kernel requires CONFIG_OF_LIBFDT. 'bootm' needs to know DT location. In addition, fix kernel console device and enable U-Boot long help. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
| * | arm: pxa: fix 2nd flash chip address on LP-8x4xSergei Ianovich2013-12-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Initial configuration has worng address of the second chip. There is an alias for the 1st chip at 0x02000000 in earlier verions of LP-8x4x, so the boot normally. However, new LP-8x4xs have a bigger 1st flash chip, and hang on boot without this patch. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
| * | arm: pxa: fix LP-8x4x USB supportSergei Ianovich2013-12-18-2/+1
| | | | | | | | | | | | | | | Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
* | | Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-18-0/+86
|\ \ \
| * | | ARM: tegra: Add the Tamonten™ NG Evaluation Carrier boardAlban Bedel2013-12-18-0/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the new Tamonten™ NG platform from Avionic Design. Currently only I2C, MMC, USB and ethernet have been tested. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | | ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"Jim Lin2013-12-18-0/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix the timeout issue after running "bootp" command in u-boot console. For example you see "EHCI timed out on TD- token=0x...". TXFIFOTHRES bits of TXFILLTUNING register should be set to 0x10 after a controller reset and before RUN bit is set (per technical reference manual). Signed-off-by: Jim Lin <jilin@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | | Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'Albert ARIBAUD2013-12-18-2/+74
|\ \ \
| * | | arm: koelsch: Add support reset functionNobuhiro Iwamatsu2013-12-18-0/+2
| | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | | arm: koelsch: Add support I2CNobuhiro Iwamatsu2013-12-18-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | This supports sh_i2c on koelsch board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | | arm: koelsch: Add support EthernetNobuhiro Iwamatsu2013-12-18-2/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The koelsch board has one sh-ether device. This supports sh-ether. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | arm: lager: Add support reset functionNobuhiro Iwamatsu2013-12-18-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | The lager board uses I2C for reset. ned-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | | arm: lager: Add support I2CNobuhiro Iwamatsu2013-12-18-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The lager board has I2C for rcar. This supports I2C for rcar on lager board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
generated by cgit v1.1 at 2024-11-09 19:23:46 +0000