summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* Exynos5420: Add base patch for SMDK5420Rajeshwari Birje2013-12-30-0/+2
| | | | | | | | | | | Adding the base patch for Exynos based SMDK5420. This shall enable compilation and basic boot support for SMDK5420. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS5: Create a common board fileRajeshwari Birje2013-12-30-0/+2
| | | | | | | | | | | Create a common board.c file for all functions which are common across all EXYNOS5 platforms. exynos_init function is provided for platform specific code. Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* ARM: AM43XX: board: add support for reading onboard EEPROMSekhar Nori2013-12-18-0/+7
| | | | | | | | Add support for reading onboard EEPROM to enable board detection. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: AM43xx: Add extra ENV settingsLokesh Vutla2013-12-18-0/+63
| | | | | | | Add Extra env settings. This is derived from am335x Extra ENV settings. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: AM43xx: Add L2 SupportLokesh Vutla2013-12-18-0/+5
| | | | | | AM4372 uses PL310 L2 Cache. Enable the configs for the same. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* ARM: AM43xx: Adapt to ti_armv7_common.h config fileLokesh Vutla2013-12-18-102/+27
| | | | | | | Use ti_armv7_common.h config file to inclde the common configs. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* arm: omap3: Fix beagleboard SPL boot hangup (GPIO clocks not enabled)Stefan Roese2013-12-18-0/+3
| | | | | | | | | | | | | Patch f33b9bd3 [arm: omap3: Enable clocks for peripherals only if they are used] breaks SPL booting on Beagleboard. Since some gpio input's are read to detect the board revision. But with this patch above, the clocks to the GPIO subsystems are not enabled per default any more. The GPIO banks need to be configured specifically now. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Michael Trimarchi <michael@amarulasolutions.com>
* Merge remote-tracking branch 'u-boot-pxa/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-18-31/+30
|\
| * ARM: pxa: Fix CONFIG_SYS_HZ on PXAMarek Vasut2013-12-18-23/+23
| | | | | | | | | | | | | | | | | | The PXA incorrectly uses CONFIG_SYS_HZ, which should be 1000 across U-Boot. Fix this. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
| * arm: pxa: update LP-8x4x to boot DT kernelSergei Ianovich2013-12-18-5/+5
| | | | | | | | | | | | | | | | DT kernel requires CONFIG_OF_LIBFDT. 'bootm' needs to know DT location. In addition, fix kernel console device and enable U-Boot long help. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
| * arm: pxa: fix 2nd flash chip address on LP-8x4xSergei Ianovich2013-12-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Initial configuration has worng address of the second chip. There is an alias for the 1st chip at 0x02000000 in earlier verions of LP-8x4x, so the boot normally. However, new LP-8x4xs have a bigger 1st flash chip, and hang on boot without this patch. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
| * arm: pxa: fix LP-8x4x USB supportSergei Ianovich2013-12-18-2/+1
| | | | | | | | | | Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
* | Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-18-0/+86
|\ \
| * | ARM: tegra: Add the Tamonten™ NG Evaluation Carrier boardAlban Bedel2013-12-18-0/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the new Tamonten™ NG platform from Avionic Design. Currently only I2C, MMC, USB and ethernet have been tested. Signed-off-by: Alban Bedel <alban.bedel@avionic-design.de> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * | ARM: config: USB: Tegra30/114: Fix EHCI timeout issue on "bootp"Jim Lin2013-12-18-0/+2
| |/ | | | | | | | | | | | | | | | | | | | | | | Fix the timeout issue after running "bootp" command in u-boot console. For example you see "EHCI timed out on TD- token=0x...". TXFIFOTHRES bits of TXFILLTUNING register should be set to 0x10 after a controller reset and before RUN bit is set (per technical reference manual). Signed-off-by: Jim Lin <jilin@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Merge branch 'u-boot-sh/rmobile' into 'u-boot-arm/master'Albert ARIBAUD2013-12-18-2/+74
|\ \
| * | arm: koelsch: Add support reset functionNobuhiro Iwamatsu2013-12-18-0/+2
| | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | arm: koelsch: Add support I2CNobuhiro Iwamatsu2013-12-18-0/+16
| | | | | | | | | | | | | | | | | | This supports sh_i2c on koelsch board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | arm: koelsch: Add support EthernetNobuhiro Iwamatsu2013-12-18-2/+21
| | | | | | | | | | | | | | | | | | | | | The koelsch board has one sh-ether device. This supports sh-ether. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | arm: lager: Add support reset functionNobuhiro Iwamatsu2013-12-18-0/+2
| | | | | | | | | | | | | | | | | | The lager board uses I2C for reset. ned-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | arm: lager: Add support I2CNobuhiro Iwamatsu2013-12-18-0/+14
| | | | | | | | | | | | | | | | | | | | | The lager board has I2C for rcar. This supports I2C for rcar on lager board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | arm: lager: Add support EthernetNobuhiro Iwamatsu2013-12-18-0/+19
| |/ | | | | | | | | | | | | The lager board has one sh-ether device. This supports sh-ether. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* | arm: atmel: at91sam9x5: move CONFIG_SYS_NO_FLASH to proper positionBo Shen2013-12-17-5/+3
| | | | | | | | | | | | | | | | | | | | In config_cmd_default.h, it will use CONFIG_SYS_NO_FLASH to decide whether include CONFIG_CMD_FLASH and CONFIG_CMD_IMLS. So, move the CONFIG_SYS_NO_FLASH to proper position, then we don't need to undef these two commands. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | arm: atmel: at91sam9x5: cleanup unneeded undefBo Shen2013-12-17-5/+0
|/ | | | | | | remove unneeded #undef for at91sam9x5ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
* arm: omap: cm_t35: update config fileNikita Kiryanov2013-12-12-5/+4
| | | | | | | | | | | | | | | | | | This patch makes the following updates to the cm_t35 config file: - Replace "ttyS" in default environment kernel bootargs with the new "ttyO" notation. - Remove "omapfb.debug=y" from default environment kernel bootargs. - Define a minimal power-on delay for USB hub ports so that slow-to-power-on USB sticks will have enough time to become responsive. - Add support for bootz command - ulpi_reset is not necessary and always fails with the following error message: "ULPI: ulpi_reset: failed writing reset bit" So, remove it. Cc: Tom Rini <trini@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Stefan Roese <sr@denx.de>
* am3517_evm: activate Ethernet PHYYegor Yefremov2013-12-12-0/+5
| | | | | | | Pin 30 is connected to PHY's RESET# signal, so it must be put to high. Otherwise PHY won't be found via MDIO interface. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* am335x, siemens boards: adapt default environment settingHeiko Schocher2013-12-12-1/+1
| | | | | | | | | | | | | | | | commit 16297cfb2a20c9d89834cd9e31edac5184a777a1 Author: Mateusz Zalega <m.zalega@samsung.com> Date: Fri Oct 4 19:22:26 2013 +0200 usb: new board-specific USB init interface introduced a new parameter to the dfu command. Adapt the default environment for the siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Mateusz Zalega <m.zalega@samsung.com>
* am335x_evm: Consolidate DFU environment parts into the DFU part of the fileTom Rini2013-12-12-8/+15
| | | | | | | | To make managing the environment easier, add DFUARGS to CONFIG_EXTRA_ENV_SETTINGS. Then we set DFUARGS down in the DFU part of the file, and include (or not) the NAND part, based on if NAND is set. Signed-off-by: Tom Rini <trini@ti.com>
* arm: omap3: Add SPL support to cm_t35Stefan Roese2013-12-12-2/+63
| | | | | | | | | | | | | Add SPL U-Boot support to replace x-loader on the Compulab cm_t35 board. Currently only the 256MiB SDRAM board versions are supported. Tested by booting via MMC and NAND. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* arm: omap3: Remove bootargs mem_size handlingStefan Roese2013-12-12-3/+0
| | | | | | | | | | | The memory size is autodetected and is passed to the Linux kernel either via ATAGs or device-tree (dtb). So there is no need to pass it via the bootargs. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tom Rini <trini@ti.com>
* arm: omap3: Add SPL support to tao3530Stefan Roese2013-12-12-0/+65
| | | | | | | | | | | | | Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx). Tested by booting via MMC and NAND. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tom Rini <trini@ti.com>
* arm, omap3: Add support for TechNexion modulesTapani Utriainen2013-12-12-0/+301
| | | | | | | | | | | | | | Add support for TechNexion TAO3530 SoM This patch has been posted quite a long time ago. I ported it to the latest mainline U-Boot version. With some additional cleanup and enhancements. Signed-off-by: Tapani Utriainen <tapani@technexion.com> CC: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tom Rini <trini@ti.com>
* ARM: OMAP4: Move TEXT_BASE down to non-HS limitLokesh Vutla2013-12-12-3/+8
| | | | | | | | | | | | | | | With the current scenario SPL size is being overlapped with the public stack and not allowing any OMAP4 device to boot. So the suggestion came up was to move the TEXT_BASE down to non-HS limit. Fixing the same and also moving the SRAM_SCRATCH_SPACE_ADDR up to the end of image downloadable area. Discussion on this can be seen here: https://www.mail-archive.com/u-boot@lists.denx.de/msg127147.html Tested on OMAP4460 PANDA. Reported-by: Chao Xu <caesarxuchao@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-12-10-677/+1233
|\ | | | | | | | | | | | | | | Conflicts: board/samsung/trats2/trats2.c include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
| * Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-10-1200/+4625
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/armv7/rmobile/Makefile doc/README.scrapyard Needed manual fix: arch/arm/cpu/armv7/omap-common/Makefile board/compulab/cm_t335/u-boot.lds
| * | vexpress: use correct timer address on extended memory map systemsIan Campbell2013-12-10-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: albert.u.boot@aribaud.net
| * | arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)Mateusz Kulikowski2013-12-09-0/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for USB-A9263 board manufactured by Calao Systems (http://www.calao-systems.com/). Code is based on old U-Boot sources (2010.09) released by Calao. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | arm, at91: add siemens corvus boardHeiko Schocher2013-12-09-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enable support for the siemens AT91SAM9G20 based board corvus. Signed-off-by: Boris Schmidt <boris.schmidt@siemens.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | arm, at91: add Siemens board taurus and axmHeiko Schocher2013-12-09-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enable support for the siemens AT91SAM9G20 based boards taurus and axm. Signed-off-by: Roger Meier <r.meier@siemens.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | at91: switch coloured LED to gpio APIAndreas Bießmann2013-12-09-7/+7
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | at91: nand: switch atmel_nand to generic GPIO APIAndreas Bießmann2013-12-09-17/+17
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de> Acked-by: Scott Wood <scottwood@freescale.com>
| * | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-06-47/+51
| |\ \
| | * | arm: arndale: disable spi bootMinkyu Kang2013-12-06-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arndale board is booted from mmc Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Inderpal Singh <inderpal.singh@linaro.org>
| | * | board: trats2: update Tizen partition definitionsPiotr Wilczek2013-12-03-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates Tizen partions layout. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | board: trats2: fix environmental variablesPiotr Wilczek2013-12-03-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In this patch variable names are used instead of hardcoded names Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | board: trats2: remove unused defines from config filePiotr Wilczek2013-12-03-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | exynos: spl: Add a custom spi copy functionRajeshwari Shinde2013-12-03-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a custom spi_copy funtion to copy u-boot from SF to RAM. This is faster then iROM spi_copy funtion as this runs spi at 50Mhz and also in WORD mode of operation. Changed a printf in pinmux.c to debug just to avoid the compilation error in SPL. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | trats: usb: Add usb_cable_connected() functionPrzemyslaw Marczak2013-12-03-0/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | trats2: enable dfu and thor protocol for Tizen downloadPiotr Wilczek2013-12-02-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trats2 config is updated to support DFU mode. Malloc pool must be increased for DFU buffer allocation. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | trats2: enable ums support on Trats2Piotr Wilczek2013-12-02-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for USB and enables 'ums' command on Trats2 board. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
generated by cgit v1.1 at 2024-10-12 15:57:32 +0000