summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* omap: am335x_evm: enable i2c1 channelSteve Sakoman2012-09-01-0/+1
| | | | | | | This patch sets up pinmux, enables fclk, and defines CONFIG_I2C_MULTI_BUS Signed-off-by: Steve Sakoman <steve@sakoman.com>
* beagle: fix termination of buddy env settingPeter Meerwald2012-09-01-1/+1
| | | | Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
* igep00x0: default mmcrootfstype to EXT4Javier Martinez Canillas2012-09-01-1/+1
| | | | | | | | | omap2plus_defconfig now has built-in compile support for EXT4 enabled by default now. So, we can use EXT4 as the default root file system type for MMC. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
* igep00x0: default to OMAP-specific serial driverJavier Martinez Canillas2012-09-01-1/+1
| | | | | | | | | An OMAP specific serial driver was merged on the Linux kenel a long time ago. So, it makes sense to default the console name to OMAP ttyO instead of the generic ttyS naming. Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Acked-by: Enric Balletbo i Serra <eballetbo@gmail.com>
* da850/omap-l138: add support for direct NOR boot modeLad, Prabhakar2012-09-01-2/+20
| | | | | | | | | | | This patch adds support for direct NOR boot mode on da850/omap-l138. Added da850evm_direct_nor entry in boards.cfg to allow to build targets. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
* da850/omap-l138: Add support for NAND SPLLad, Prabhakar2012-09-01-0/+26
| | | | | | | | | | This patch adds configuration required for NAND SP on DA850/OMAP-L138. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
* da850/omap-l138: Add support to read u-boot image from MMC/SDLad, Prabhakar2012-09-01-0/+13
| | | | | | | | | | | | | | | DA850/OMAP-L138 does not support strict MMC/SD boot mode. SPL will be in SPI flash and U-Boot image will be in MMC/SD card. SPL will do the low level initialization and then loads the u-boot image from MMC/SD card. Define CONFIG_SPL_MMC_LOAD macro in the DA850/OMAP-L138 configuration file to enable this feature. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
* da850/omap-l138: Define SPI specific configs for SPL only when SPI is usedLad, Prabhakar2012-09-01-7/+10
| | | | | | | | | | define SPI specific configs for SPL only when CONFIG_USE_SPIFLASH config is defined Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
* da850/omap-l138: Make MMC and NOR support mutually exclusiveRajashekhara, Sudhakar2012-09-01-0/+2
| | | | | | | | | | | | On Logic PD Rev.3 DA850/OMAP-L138 EVM, NOR and MMC/SD cannot work together. This patch enables the MMC/SD support only when NOR support is disabled. NOR Flash identification works even without this patch, but erase and write will have issues. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
* da850/omap-l138: Add MMC support for DA850/OMAP-L138Lad, Prabhakar2012-09-01-0/+17
| | | | | | | | | This patch adds support for MMC/SD on DA850/OMAP-L138. Tested-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com> Signed-off-by: Hadli, Manjunath <manjunath.hadli@ti.com>
* omap: am335x_evm: remove unused definitionsSteve Sakoman2012-09-01-1/+0
| | | | | | | | | | UART_RESET, UART_CLK_RUNNING_MASK, and UART_SMART_IDLE_EN are defined inn evm.c but not used. Also removes unnecessary include of serial.h PHYS_DRAM_1_SIZE is defined in am335x_evm.h but never used. Signed-off-by: Steve Sakoman <steve@sakoman.com>
* OMAP3: mcx: read hot-water-button after resetStefano Babic2012-09-01-0/+2
| | | | | | | Detect hot-water-button to start a differnt image. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tom Rini <trini@ti.com>
* OMAP3: mcx: updated default environmentStefano Babic2012-09-01-37/+91
| | | | | | | | Patch drops also not used CFI setup in the configuration file. Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tom Rini <trini@ti.com>
* mcx: increased buffer for command lineStefano Babic2012-09-01-1/+1
| | | | | Signed-off-by: Stefano Babic <sbabic@denx.de> CC: Tom Rini <trini@ti.com>
* hawkboard/omapl-138: Add support for generating ais image for hawkboardSughosh Ganu2012-09-01-0/+1
| | | | | | | | | Parameters used for configuring certain SoC peripherals are parsed from the cfg file and appended as part of the ais image's header. The u-boot-spl.ais generated is flashed separately to the nand, so do not delete the file after generation of u-boot.ais. Signed-off-by: Sughosh Ganu <urwithsughosh@gmail.com>
* Consolidate bootcount code into drivers/bootcountStefan Roese2012-09-01-0/+57
| | | | | | | | | | | | | | | | | | | This patch moves all bootcount implementations into a common directory: drivers/bootcount. The generic bootcount driver is now usable not only by powerpc platforms, but others as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Valentin Longchamp <valentin.longchamp@keymile.com> Cc: Christian Riesch <christian.riesch@omicron.at> Cc: Manfred Rudigier <manfred.rudigier@omicron.at> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Reinhard Meyer <reinhard.meyer@emk-elektronik.de> Tested-by: Valentin Longchamp <valentin.longchamp@keymile.com> Tested-by: Christian Riesch <christian.riesch@omicron.at> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* mpc52xx: remove o2dnt boardAnatolij Gustschin2012-09-01-297/+0
| | | | | | | Remove old o2dnt board without OF support. New support for this board is added by the previous patch, O2I configuration. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* mpc52xx: add common o2dnt and o2dnt2 support and configurationsAnatolij Gustschin2012-09-01-0/+834
| | | | | | | | Add common code for o2dnt and o2dnt2 based boards and add different board configuration files for O2D, O2I, O2DNT2, O2D300, O2MNT and O3DNT boards. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* mpc5xxx: add pci_mpc5xxx_init prototype to common headerAnatolij Gustschin2012-09-01-0/+3
| | | | | | | Add pci_mpc5xxx_init() prototype to the header file, so board .c files do not need to add extern pci_mpc5xxx_init() declaration. Signed-off-by: Anatolij Gustschin <agust@denx.de>
* sh: tmu: Changed TMU driver using array of structuresNobuhiro Iwamatsu2012-08-21-0/+75
| | | | | | | | | This changed into access using array of structure from access to the register using the definition of the register by macro. And removed white space. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* mtd/cfi_flash: fix write problems for Numonyx P33/30 32 MBit flashsHolger Brunck2012-08-13-0/+1
| | | | | | | | | | | | | | | | | | commit 54652991 Work around bug in Numonyx P33/P30 256-Mbit 65nm flash chips fixes a problem for Numonyx P33/P30 flashes for 256-Mbit, but this leads to problems for smaller versions of this chip e.g. the 32Mbit version with deviceid 0x16 on mgcoge. So move the code for this work around to an own function and check previously manufacturer id and device id to not break other flashes which don't need this work around. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Heiko Schocher <hs@denx.de> cc: Stefan Roese <sr@denx.de> cc: Philippe De Muyter <phdm@macqel.be> cc: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Stefan Roese <sr@denx.de>
* cfi_flash: add support for Spansion flash PPB sector protectionAnatolij Gustschin2012-08-13-0/+7
| | | | | | | | | | Erasing flash sectors protected with persistent protection bit (PPB) mechanism on Spansion flash chips doesn't work. Add sector protection status checking and sector lock and unlock commands to fix this. Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Stefan Roese <sr@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* zfs: Add ZFS filesystem supportJorgen Lundman2012-08-09-0/+1571
| | | | | | | | | | | | | | | | | | | | | U-Boot port is based on sources forked from GRUB-0.97 by Sun in 2004, which can be found here: http://src.opensolaris.org/source/xref/onnv/onnv-gate/usr/src/grub/grub-0.97/stage2/zfs-include/zfs.h Released by Sun for GRUB under the license: * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. GRUB official releases include ZFS in version: ftp://alpha.gnu.org/gnu/grub/grub-1.99~rc1.tar.gz And patched against GRUB Bazaar repository for ashift fixes (4KB HDDs) more conveniently found at github: https://github.com/pendor/grub-zfs/commit/e7b6ef3ac3b9685ac4c394c897b1d4221b7381f1 Signed-off-by: Jorgen Lundman <lundman@lundman.net>
* rename EB+MCF-EV123 to its current marketing name EB+CPU5282Jens Scharsig2012-08-09-5/+5
| | | | | | | | | * rename board directory to eb_cpu5282 * rename EB+MCF-EV123_.*config to eb_cpu5282_.*config * add Maintainer for EB+CPU5282 board * rename prompt Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
* configs: Remove unused symbol CONFIG_DISCOVER_PHYFabio Estevam2012-08-09-10/+0
| | | | | | CONFIG_DISCOVER_PHY is not used anywhere, so remove it from config files. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* Add run_command_list() to run a list of commandsSimon Glass2012-08-09-0/+13
| | | | | | | | | This new function runs a list of commands separated by semicolon or newline. We move this out of cmd_source so that it can be used by other code. The PXE code also uses the new function. Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Simon Glass <sjg@chromium.org>
* Malloc: Fix -Wundef warningsMarek Vasut2012-08-09-3/+3
| | | | | | | | | | In file included from arch/arm/lib/board.c:43:0: include/malloc.h:490:5: warning: "HAVE_MMAP" is not defined [-Wundef] include/malloc.h:590:5: warning: "HAVE_USR_INCLUDE_MALLOC_H" is not defined [-Wundef] include/malloc.h:757:5: warning: "HAVE_MMAP" is not defined [-Wundef] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Cc: Wolfgang Denk <wd@denx.de>
* global_data: unify global flag definesMike Frysinger2012-08-09-0/+28
| | | | | | | All the global flag defines are the same across all arches. So unify them in one place, and add a simple way for arches to extend for their needs. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2012-08-09-24/+72
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mpc85xx: powerpc/85xx: use CONFIG_SYS_FSL_PCIE_COMPAT macro when setting the PCI LIODNs powerpc/mpc85xx: Ignore E bit for BSC9130/1 powerpc/sgmii: To support PHY link state auto detect in SGMII mode powerpc/85xx: improve definition of BR_PHYS_ADDR macro powerpc/p2041: configure the CPLD lane_mux according to RCW powerpc/ddr: fix fsl_ddr_get_dimm_params compile error powerpc/corenet: fix compile error when CONFIG_SYS_NO_FLASH is defined powerpc/mpc8xxx: fix workaround for errata DDR111 and DDR134 for DDR over 4GB powerpc/p1022ds: fix DIU/LBC switching with NAND enabled powerpc/p1022ds: add support for SPI and SD boot Signed-off-by: Wolfgang Denk <wd@denx.de>
| * powerpc/85xx: improve definition of BR_PHYS_ADDR macroTimur Tabi2012-08-08-20/+18
| | | | | | | | | | | | | | | | The BR_PHYS_ADDR(x) macro was missing parentheses around "x" in the macro definition, so callers had to supply their own parenthesis. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * powerpc/corenet: fix compile error when CONFIG_SYS_NO_FLASH is definedShaohui Xie2012-08-08-1/+6
| | | | | | | | | | | | | | | | | | | | ENV location compile logic is wrong, and when CONFIG_SYS_NO_FLASH is defined and non-NOR u-boot is building, it will cause compile error. Also, add CONFIG_SYS_FLASH_USE_BUFFER_WRITE for p2041, which will improve NOR flash write performance. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
| * powerpc/p1022ds: add support for SPI and SD bootMatthew McClintock2012-08-08-3/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add TLB mappings, board target options, and configuration items need for SPI/SD boot. Since P1022DS RevB board, the NOR flash have been changed to 16 bit/28bit address flash, therefore, when SDHC/ESPI booting and access to eLBC, the PMUXCR[0~1] must be set to 10b, and PMUXCR[9~10] must be set to 00b for them. Configure the PX_BRDCFG0[0~1] to 10b which is connected to SPI devices as SPI_CS(0:3)_B. Signed-off-by: Matthew McClintock <msm@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Jiang Yutang <b14898@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com>
* | sh: Add support pin function control using GPIONobuhiro Iwamatsu2012-08-08-0/+192
|/ | | | | | | | Renesas SH and R-Mobile set up device using PFC. This provide the framework. Most codes were brought from linux kernel. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* powerpc/82xx: adapt SDRAM settings for mgcoge3neGerlando Falauto2012-07-31-2/+4
| | | | | | | | | | The HW guys suggested to change these two values. And these values are now identical to the values we use on mgcoge. PSDMR_WRC was set to 1C as it should lead to better performance. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* powerpc/82xx: use SDRAM detection for mgcoge2neGerlando Falauto2012-07-31-4/+13
| | | | | | | | | | | | | | mgcoge2ne was an intermediate step towards mgcoge3ne. One difference is the smaller SDRAM on mgcoge2ne (128MB). To support both boards with the same u-boot we use here the SDRAM detection. This patch enables SDRAM detection between 256MB and 128MB. So in addition to the existing 256MB geometry: 4 chips x 8M (13 rows, 10 cols) x 16 bit x 4 banks we can now also have 128MB geometry: 4 chips x 4M (13 rows, 9 cols) x 16 bit x 4 banks Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
* powerpc/82xx: move km/km82xx-common.h within km82xx.hGerlando Falauto2012-07-31-318/+289
| | | | | | | The only file including km82xx-common.h is km82xx.h. So there is no need to have it as a separate file. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
* powerpc/82xx: merge mgcoge.h and mgcoge3ne.h into km82xx.hGerlando Falauto2012-07-31-94/+57
| | | | | | | | | Since mgcoge and mgcoge3ne are the only km82xx boards, there is no need to keep them as separate .h config files. Therefore, make mgcoge3ne.h and mgcoge.h converge into a single km82xx.h file. Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
* powerpc/82xx: move mgcoge, mgcoge3ne defines to ease subsequent mergeGerlando Falauto2012-07-31-34/+34
| | | | Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
* powerpc/82xx: remove unused define for mgcoge3neHolger Brunck2012-07-31-3/+0
| | | | Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cWolfgang Denk2012-07-31-4/+12
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-i2c: km/common: remove printfs for i2c deblocking code CONFIG: SMDK5250: I2C: Enable I2C I2C: Add support for Multi channel I2C: Modify the I2C driver for EXYNOS5 I2C: Move struct s3c24x0_i2c to a common place. EXYNOS: PINMUX: Add pinmux support for I2C EXYNOS5: define EXYNOS5_I2C_SPACING EXYNOS: Add I2C base address. EXYNOS: CLK: Add i2c clock mx6qsabrelite: add i2c multi-bus support imx-common: add i2c.c for bus recovery support i.mx53: add definition for I2C3_BASE_ADDR i.mx: iomux-v3.c: move to imx-common directory i.mx: iomux-v3.h: move to imx-common include directory iomux-v3: remove include of mx6x_pins.h mxc_i2c: finish adding CONFIG_I2C_MULTI_BUS support mxc_i2c: add bus recovery support mxc_i2c: prep work for multiple busses support mxc_i2c: add i2c_regs argument to i2c_imx_stop mxc_i2c: add retries mxc_i2c: check for arbitration lost mxc_i2c: change slave addr if conflicts with destination. mxc_i2c: don't disable controller after every transaction mxc_i2c: place i2c_reset code inline mxc_i2c: place imx_start code inline mxc_i2c: remove redundant read mxc_i2c: combine i2c_imx_bus_busy and i2c_imx_trx_complete into wait_for_sr_state mxc_i2c.c: code i2c_probe as a 0 length i2c_write mxc_i2c: call i2c_imx_stop on error in i2c_read/i2c_write mxc_i2c: create i2c_init_transfer mxc_i2c: clear i2sr before waiting for bit mxc_i2c: create tx_byte function mxc_i2c: remove ifdef of CONFIG_HARD_I2C mxc_i2c: fix i2c_imx_stop i2c: deblock i2c bus also if accessed before realocation Signed-off-by: Wolfgang Denk <wd@denx.de>
| * CONFIG: SMDK5250: I2C: Enable I2CRajeshwari Shinde2012-07-31-0/+10
| | | | | | | | | | | | | | | | | | | | | | This enables I2C support on smdk5250. Pinmux setting moved to board file to avoid repeated setting of gpio lines. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org>
| * mx6qsabrelite: add i2c multi-bus supportTroy Kisky2012-07-31-4/+2
| | | | | | | | | | | | | | This includes bus recovery support. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Jason Liu <r64343@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-microblazeWolfgang Denk2012-07-31-16/+113
|\ \ | |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-microblaze: microblaze: Wire up SPI driver spi: microblaze: Adds driver for Xilinx SPI controller microblaze: intc: Clear interrupt code microblaze: Call serial multi initialization microblaze: Move __udelay implementation microblaze: Remove extern from board.c microblaze: Wire up dts configuration fdt: Add board specific dts inclusion microblaze: Move individual board linker scripts to common script in cpu tree. microblaze: Add gpio.h microblaze: Add missing undefs for UBI and UBIFS microblaze: Expand and correct configuration comments microblaze: Enable ubi support microblaze: Avoid compile error on systems without cfi flash microblaze: Remove wrong define CONFIG_SYS_FLASH_PROTECTION Conflicts: drivers/spi/Makefile Signed-off-by: Wolfgang Denk <wd@denx.de>
| * microblaze: Wire up SPI driverStephan Linz2012-07-31-3/+52
| | | | | | | | | | | | | | | | | | | | | | | | | | Depending on XILINX_SPI_FLASH_BASEADDR enable SPI flash and environment in SPI flash. Expected values from xparameters.h are: - XILINX_SPI_FLASH_BASEADDR - XILINX_SPI_FLASH_MAX_FREQ - XILINX_SPI_FLASH_CS Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Michal Simek <monstr@monstr.eu>
| * microblaze: intc: Clear interrupt codeMichal Simek2012-07-10-1/+0
| | | | | | | | | | | | | | | | | | Clear and prepare for device-tree driven configuration. Remove CONFIG_SYS_INTC_0 definition Use dynamic allocation instead of static. Signed-off-by: Michal Simek <monstr@monstr.eu> Acked-by: Simon Glass <sjg@chromium.org>
| * microblaze: Wire up dts configurationStephan Linz2012-07-10-0/+5
| | | | | | | | | | | | | | | | | | - enable OF control and embedded OF - set default device tree file name to 'microblaze' - add CPP to dtc proxy: board/xilinx/dts/microblaze.dts - add an empty but processable dts for microblaze-generic Signed-off-by: Stephan Linz <linz@li-pro.net>
| * microblaze: Add missing undefs for UBI and UBIFSStephan Linz2012-07-09-0/+2
| | | | | | | | | | | | | | In the case of missing flash usage disaple (undef) all the UBI support in the same way as for JFFS2. Signed-off-by: Stephan Linz <linz@li-pro.net>
| * microblaze: Expand and correct configuration commentsStephan Linz2012-07-09-7/+29
| | | | | | | | | | | | | | | | | | | | | | | | - fix CONFIG_SYS_MALLOC_BASE from 0x11FB_F000 to 0x13EF_F000 - add new size calculation for CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_MALLOC_LEN derived from SIZE - change CONFIG_SYS_MONITOR_BASE and CONFIG_SYS_MALLOC_BASE calculation to a symbolic equation with the corresponding _LEN definitions - add a "CFI flash memory layout - Example" comment Signed-off-by: Stephan Linz <linz@li-pro.net>
| * microblaze: Enable ubi supportStephan Linz2012-06-27-2/+18
| | | | | | | | | | | | | | | | | | Increase malloc area for UBI to >= 512k -- foreseeing of UBIFS set to 768k. To save memory in flash (CONFIG_SYS_MONITOR_LEN) the UBIFS is disabled by default. Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Michal Simek <monstr@monstr.eu>
| * microblaze: Avoid compile error on systems without cfi flashStephan Linz2012-06-27-3/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | Use XILINX_FLASH_START to set/unset FLASH and RAMENV. Error: board.c: In function 'board_init': board.c:134: error: 'XILINX_FLASH_START' undeclared (first use in this function) board.c:134: error: (Each undeclared identifier is reported only once board.c:134: error: for each function it appears in.) Signed-off-by: Stephan Linz <linz@li-pro.net> Signed-off-by: Michal Simek <monstr@monstr.eu>
generated by cgit v1.1 at 2024-12-26 22:12:41 +0000