summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* arm: pxa: update LP-8x4x to boot DT kernelSergei Ianovich2013-12-18-5/+5
| | | | | | | | DT kernel requires CONFIG_OF_LIBFDT. 'bootm' needs to know DT location. In addition, fix kernel console device and enable U-Boot long help. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
* arm: pxa: fix 2nd flash chip address on LP-8x4xSergei Ianovich2013-12-18-1/+1
| | | | | | | | | | | | Initial configuration has worng address of the second chip. There is an alias for the 1st chip at 0x02000000 in earlier verions of LP-8x4x, so the boot normally. However, new LP-8x4xs have a bigger 1st flash chip, and hang on boot without this patch. Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
* arm: pxa: fix LP-8x4x USB supportSergei Ianovich2013-12-18-2/+1
| | | | | Signed-off-by: Sergei Ianovich <ynvich@gmail.com> CC: Marek Vasut <marex@denx.de>
* arm: omap: cm_t35: update config fileNikita Kiryanov2013-12-12-5/+4
| | | | | | | | | | | | | | | | | | This patch makes the following updates to the cm_t35 config file: - Replace "ttyS" in default environment kernel bootargs with the new "ttyO" notation. - Remove "omapfb.debug=y" from default environment kernel bootargs. - Define a minimal power-on delay for USB hub ports so that slow-to-power-on USB sticks will have enough time to become responsive. - Add support for bootz command - ulpi_reset is not necessary and always fails with the following error message: "ULPI: ulpi_reset: failed writing reset bit" So, remove it. Cc: Tom Rini <trini@ti.com> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Stefan Roese <sr@denx.de>
* am3517_evm: activate Ethernet PHYYegor Yefremov2013-12-12-0/+5
| | | | | | | Pin 30 is connected to PHY's RESET# signal, so it must be put to high. Otherwise PHY won't be found via MDIO interface. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
* am335x, siemens boards: adapt default environment settingHeiko Schocher2013-12-12-1/+1
| | | | | | | | | | | | | | | | commit 16297cfb2a20c9d89834cd9e31edac5184a777a1 Author: Mateusz Zalega <m.zalega@samsung.com> Date: Fri Oct 4 19:22:26 2013 +0200 usb: new board-specific USB init interface introduced a new parameter to the dfu command. Adapt the default environment for the siemens boards. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Mateusz Zalega <m.zalega@samsung.com>
* am335x_evm: Consolidate DFU environment parts into the DFU part of the fileTom Rini2013-12-12-8/+15
| | | | | | | | To make managing the environment easier, add DFUARGS to CONFIG_EXTRA_ENV_SETTINGS. Then we set DFUARGS down in the DFU part of the file, and include (or not) the NAND part, based on if NAND is set. Signed-off-by: Tom Rini <trini@ti.com>
* arm: omap3: Add SPL support to cm_t35Stefan Roese2013-12-12-2/+63
| | | | | | | | | | | | | Add SPL U-Boot support to replace x-loader on the Compulab cm_t35 board. Currently only the 256MiB SDRAM board versions are supported. Tested by booting via MMC and NAND. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Igor Grinberg <grinberg@compulab.co.il> Cc: Nikita Kiryanov <nikita@compulab.co.il> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* arm: omap3: Remove bootargs mem_size handlingStefan Roese2013-12-12-3/+0
| | | | | | | | | | | The memory size is autodetected and is passed to the Linux kernel either via ATAGs or device-tree (dtb). So there is no need to pass it via the bootargs. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tom Rini <trini@ti.com>
* arm: omap3: Add SPL support to tao3530Stefan Roese2013-12-12-0/+65
| | | | | | | | | | | | | Add SPL support for the Technexion TAO3530 SOM to replace x-loader. Tested with the Thunder baseboard. Currently this is only tested with the TAO3530 SOM revision (Ax/Bx). Tested by booting via MMC and NAND. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tapani Utriainen <tapani@technexion.com> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tom Rini <trini@ti.com>
* arm, omap3: Add support for TechNexion modulesTapani Utriainen2013-12-12-0/+301
| | | | | | | | | | | | | | Add support for TechNexion TAO3530 SoM This patch has been posted quite a long time ago. I ported it to the latest mainline U-Boot version. With some additional cleanup and enhancements. Signed-off-by: Tapani Utriainen <tapani@technexion.com> CC: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thorsten Eisbein <thorsten.eisbein@head-acoustics.de> Cc: Tom Rini <trini@ti.com>
* ARM: OMAP4: Move TEXT_BASE down to non-HS limitLokesh Vutla2013-12-12-3/+8
| | | | | | | | | | | | | | | With the current scenario SPL size is being overlapped with the public stack and not allowing any OMAP4 device to boot. So the suggestion came up was to move the TEXT_BASE down to non-HS limit. Fixing the same and also moving the SRAM_SCRATCH_SPACE_ADDR up to the end of image downloadable area. Discussion on this can be seen here: https://www.mail-archive.com/u-boot@lists.denx.de/msg127147.html Tested on OMAP4460 PANDA. Reported-by: Chao Xu <caesarxuchao@gmail.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-12-10-677/+1233
|\ | | | | | | | | | | | | | | Conflicts: board/samsung/trats2/trats2.c include/configs/exynos5250-dt.h Signed-off-by: Tom Rini <trini@ti.com>
| * Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-10-1200/+4625
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/armv7/rmobile/Makefile doc/README.scrapyard Needed manual fix: arch/arm/cpu/armv7/omap-common/Makefile board/compulab/cm_t335/u-boot.lds
| * | vexpress: use correct timer address on extended memory map systemsIan Campbell2013-12-10-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Ian Campbell <ijc@hellion.org.uk> Cc: albert.u.boot@aribaud.net
| * | arm: at91: support for the Calao USB-A9263 board (based on AT91SAM9263)Mateusz Kulikowski2013-12-09-0/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for USB-A9263 board manufactured by Calao Systems (http://www.calao-systems.com/). Code is based on old U-Boot sources (2010.09) released by Calao. Signed-off-by: Mateusz Kulikowski <mateusz.kulikowski@gmail.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | arm, at91: add siemens corvus boardHeiko Schocher2013-12-09-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enable support for the siemens AT91SAM9G20 based board corvus. Signed-off-by: Boris Schmidt <boris.schmidt@siemens.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | arm, at91: add Siemens board taurus and axmHeiko Schocher2013-12-09-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enable support for the siemens AT91SAM9G20 based boards taurus and axm. Signed-off-by: Roger Meier <r.meier@siemens.com> Reviewed-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | at91: switch coloured LED to gpio APIAndreas Bießmann2013-12-09-7/+7
| | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | at91: nand: switch atmel_nand to generic GPIO APIAndreas Bießmann2013-12-09-17/+17
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Acked-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik)<esw@bus-elektronik.de> Acked-by: Scott Wood <scottwood@freescale.com>
| * | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-06-47/+51
| |\ \
| | * | arm: arndale: disable spi bootMinkyu Kang2013-12-06-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | arndale board is booted from mmc Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net> Cc: Inderpal Singh <inderpal.singh@linaro.org>
| | * | board: trats2: update Tizen partition definitionsPiotr Wilczek2013-12-03-10/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch updates Tizen partions layout. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | board: trats2: fix environmental variablesPiotr Wilczek2013-12-03-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In this patch variable names are used instead of hardcoded names Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | board: trats2: remove unused defines from config filePiotr Wilczek2013-12-03-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | exynos: spl: Add a custom spi copy functionRajeshwari Shinde2013-12-03-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch implements a custom spi_copy funtion to copy u-boot from SF to RAM. This is faster then iROM spi_copy funtion as this runs spi at 50Mhz and also in WORD mode of operation. Changed a printf in pinmux.c to debug just to avoid the compilation error in SPL. Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Rajeshwari S Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | trats: usb: Add usb_cable_connected() functionPrzemyslaw Marczak2013-12-03-0/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | trats2: enable dfu and thor protocol for Tizen downloadPiotr Wilczek2013-12-02-4/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Trats2 config is updated to support DFU mode. Malloc pool must be increased for DFU buffer allocation. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | trats2: enable ums support on Trats2Piotr Wilczek2013-12-02-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for USB and enables 'ums' command on Trats2 board. Signed-off-by: Piotr Wilczek <p.wilczek@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | config: arm: exynos5250: remove duplicate definesLuka Perkov2013-11-29-22/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SPI section is already defined in this file (lines 268-288) so we can remove the duplicate definitions. While at it, also fix one tiny whitespace typo. Signed-off-by: Luka Perkov <luka@openwrt.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-12-06-13/+262
| |\ \ \
| | * | | AM3517 EVM: Enable ethernetTom Rini2013-12-06-2/+12
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| | * | | omap4_panda: Don't use ulpi_resetRoger Quadros2013-12-06-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes this error message when USB is started. "ULPI: ulpi_reset: failed writing reset bit" It is pointless to manually reset the ULPI as the USB Host Reset and PHY RESET line should take care of that. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Roger Quadros <rogerq@ti.com>
| | * | | omap3_beagle: Don't use ulpi_resetRoger Quadros2013-12-06-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes this error message when USB is started. "ULPI: ulpi_reset: failed writing reset bit" It is pointless to manually reset the ULPI as the USB Host Reset and PHY RESET line should take care of that. Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Stefan Roese <sr@denx.de> Signed-off-by: Roger Quadros <rogerq@ti.com>
| | * | | arm: am335x: Add DT (FDT) support to Siemens boardsStefan Roese2013-12-04-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable FDT support for all Siemens AM335x boards. To support newer Linux kernels with DT booting. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Roger Meier <r.meier@siemens.com> Cc: Lukas Stockmann <lukas.stockmann@siemens.com> Cc: Tom Rini <trini@ti.com> Acked-by: Heiko Schocher<hs@denx.de>
| | * | | am335x_evm: Update nandboot to use partitions and DTTom Rini2013-12-04-5/+4
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| | * | | ARM: dra7_evm: Add SATA supportRoger Quadros2013-12-04-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The evm has a SATA port. Enable SATA configuration and inititialize the SATA controller. Signed-off-by: Roger Quadros <rogerq@ti.com>
| | * | | ARM: omap5_uevm: Add SATA supportRoger Quadros2013-12-04-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The uevm has a SATA port. Inititialize the SATA controller. Signed-off-by: Roger Quadros <rogerq@ti.com>
| | * | | ARMV7: OMAP4: Add twl6032 supportOleg Kosheliev2013-12-04-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Added chip type detection and twl6032 support in the battery control and charge functions. Based on Balaji T K <balajitk@ti.com> patches for TI u-boot. Signed-off-by: Oleg Kosheliev <oleg.kosheliev@ti.com>
| | * | | ARMV7: OMAP4: Add struct for twl603x dataOleg Kosheliev2013-12-04-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The data struct is used to support different PMIC chip types. It contains the chip type and the data (e.g. registers addresses, adc multiplier) which is different for twl6030 and twl6032. Replaced some hardcoded values with the structure vars. Based on Balaji T K <balajitk@ti.com> patches for TI u-boot. Signed-off-by: Oleg Kosheliev <oleg.kosheliev@ti.com>
| | * | | cm_t335: add support for pca9555 i2c gpio extenderIlya Ledvich2013-12-04-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the 16 bits pca9555 i2c to gpio extender featured by the SB-T335 baseboard. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| | * | | cm_t335: add support for status LEDIlya Ledvich2013-12-04-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for status LED. Use the STATUS_LED APIs for indicating a boot progress. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| | * | | cm_t335: add cm_t335 board supportIlya Ledvich2013-12-04-0/+160
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add cm_t335 board directory, config file. Enable build. Signed-off-by: Ilya Ledvich <ilya@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> [trini: Adapt Makefile] Signed-off-by: Tom Rini <trini@ti.com>
| * | | | arm: rmobile: Add support koelsch boardNobuhiro Iwamatsu2013-12-03-0/+133
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The koelsch board has R8A7791, 2GB DDR3-SDRAM, USB, Quad SPI, Ethernet, and more. This patch supports the following functions: - DDR3-SDRAM - SCIF Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
| * | | | arm: rmobile: Add support lager boardNobuhiro Iwamatsu2013-12-03-0/+141
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The lager board has R8A7790, 4GB DDR3-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - DDR3-SDRAM - SCIF Signed-off-by: Kouei Abe <kouei.abe.cp@renesas.com> Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com> Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org> CC: Albert Aribaud <albert.u.boot@aribaud.net>
| * | | arm: atmel: eb_cpux9k2: config clean upJens Scharsig (BuS Elektronik)2013-12-01-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * remove mature defines from board config Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | | arm: atmel: sam9m10g45ek: let CONFIG_SYS_NO_FLASH at proper positionBo Shen2013-12-01-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In config_cmd_default.h, it will use CONFIG_SYS_NO_FLASH to decide whether include CONFIG_CMD_FLASH and CONFIG_CMD_IMLS. So, if the CONFIG_SYS_NO_FLASH defined later than include/config_cmd_default.h, These two commands will be included always. So move CONFIG_SYS_NO_FLASH definition to proper position. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | | arm926ejs, at91: add common phy_reset functionHeiko Schocher2013-12-01-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add common phy reset code into a common function. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Cc: Jens Scharsig <esw@bus-elektronik.de> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Stelian Pop <stelian@popies.net> Cc: Albin Tonnerre <albin.tonnerre@free-electrons.com> Cc: Eric Benard <eric@eukrea.com> Cc: Markus Hubig <mhubig@imko.de> Acked-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Tested-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Tested-by: Bo Shen <voice.shen@atmel.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | | arm: atmel: sama5d3: spl boot from fat fs SD cardBo Shen2013-12-01-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable Atmel sama5d3xek boart spl boot support, which can load u-boot from SD card with FAT file system. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | | arm: at91: pm9261: remove undefined bit in mckrBo Shen2013-12-01-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The PLLADIV2 bit is not defined in at91sam9261 SoC, so remove it. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
generated by cgit v1.1 at 2024-11-07 01:33:10 +0000