summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* Exynos5: Add support for USB download boot modeVivek Gautam2013-04-17-0/+5
| | | | | | | | | | | | Exynos5250 supports secondary USB device boot mode. If the iROM fails to download u-boot from the primary boot device (such as SD or eMMC), it will try to retrieve from the secondary boot device (such as USB). Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Tegra: T30: Beaver board support.Tom Warren2013-04-15-0/+76
| | | | | | | | Beaver is a Tegra30 board that is nearly 100% compatible w/Cardhu. Add a Beaver build so it can begin to be differentiated, if need be. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra: TEC: Enable boot script supportThierry Reding2013-04-15-7/+3
| | | | | | | | | | Boot script support brings TEC in line with other Tegra boards. To enable booting a Linux kernel with initial ramdisk, also include support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra: Plutux: Enable NAND and boot script supportThierry Reding2013-04-15-7/+11
| | | | | | | | | | Boot script support brings Plutux in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra: Medcom-Wide: Enable NAND and boot script supportThierry Reding2013-04-15-9/+12
| | | | | | | | | | Boot script support brings Medcom-Wide in line with other Tegra boards. In order to enable booting a Linux kernel with initial ramdisk, also add support for the new FIT image type. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* Tegra: enable verify support for the crc32 commandTom Warren2013-04-15-0/+2
| | | | | | | Some 3rd-party flash tools use the -v (verify) option of crc32 command. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* smdk5250, snow: convert to CONFIG_SPL_MAX_FOOTPRINTAlbert ARIBAUD2013-04-14-1/+1
| | | | | | | | This target wants to check full SPL size, BSS included. Remove CONFIG_SPL_MAX_SIZE definition and instead define CONFIG_SPL_MAX_FOOTPRINT. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINTAlbert ARIBAUD2013-04-14-1/+1
| | | | | | | | This target wants to check full SPL size, BSS included. Remove CONFIG_SPL_MAX_SIZE definition and instead define CONFIG_SPL_MAX_FOOTPRINT. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINTAlbert ARIBAUD2013-04-14-1/+1
| | | | | | | | This target wants to check full SPL size, BSS included. Remove CONFIG_SPL_MAX_SIZE definition and instead define CONFIG_SPL_MAX_FOOTPRINT. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
* ARM: fix CONFIG_SPL_MAX_SIZE semanticsAlbert ARIBAUD2013-04-14-1/+1
| | | | | | | | | | | | | | | | | | | | Remove SPL-related ASSERT() in arch/arm/cpu/u-boot.lds as this file is never used for SPL builds. Rewrite the ASSERT() in arch/arm/cpu/u-boot-spl.lds to separately test image (text,data,rodata...) size, BSS size, and full footprint each against its own max, and make Tegra boards check full footprint. Also, output section mmutable is not used in SPL builds. Remove it. Finally, update README regarding the (now homogeneous) semantics of CONFIG_SPL_[BSS_]MAX_SIZE and add the new CONFIG_SPL_MAX_FOOTPRINT macro. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Reported-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-14-1/+3
|\
| * fsl_esdhc: Fix DMA transfer completion waiting loopAndrew Gabbasov2013-04-14-1/+3
| | | | | | | | | | | | | | | | | | | | | | Rework the waiting for transfer completion loop condition to continue waiting until both Transfer Complete and DMA End interrupts occur. Checking of DLA bit in Present State register looks not needed in addition to interrupts status checking, so it can be removed from the condition. Also, DMA Error condition is added to the list of data errors, checked in the loop. Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com>
* | Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-14-1/+1
|\ \ | |/
| * mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no argumentsOtavio Salvador2013-04-13-1/+1
| | | | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
* | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-13-1/+1
|\ \
| * | omap5_common.h: Switch to ext4Tom Rini2013-04-12-1/+1
| | | | | | | | | | | | | | | | | | | | | ext3 should not be used on SD cards, so use ext4 instead. Cc: Sricharan R <r.sricharan@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
* | | integrator: enable device treeLinus Walleij2013-04-12-0/+1
| | | | | | | | | | | | | | | | | | | | | This enables the device tree library on the Integrator platforms so we can pass a device tree when booting. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | VCMA9: Enable CONFIG_CMD_NAND_YAFFSTom Rini2013-04-12-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | As this board has NAND and supports YAFFS2, add CONFIG_MD_NAND_YAFFS Cc: David Müller <d.mueller@elsoft.ch> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: David Müller <d.mueller@elsoft.ch>
* | | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-12-143/+267
|\ \ \ | |/ / |/| | | | | | | | Conflicts: drivers/video/exynos_fb.c
| * | env: Add redundant env support to UBI envJoe Hershberger2013-04-11-0/+3
| | | | | | | | | | | | | | | | | | Allow the user to specify two UBI volumes to use for the environment Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * | env: Add support for UBI environmentJoe Hershberger2013-04-11-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | UBI is a better place for the environment on NAND devices because it handles wear-leveling and bad blocks. Gluebi is needed in Linux to access the env as an MTD partition. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * | ubi: Expose a few simple functions from the cmd_ubiJoe Hershberger2013-04-11-0/+3
| | | | | | | | | | | | | | | | | | Part, Read, and Write functionality that will be used by env_ubi. Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * | am335x_evm: Enable DFU for NAND and MMC, provide example alt_infosPantelis Antoniou2013-04-10-2/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Add CONFIG_DFU_NAND, CONFIG_DFU_MMC - Set dfu_alt_info_nand, dfu_alt_info_emmc and dfu_alt_info_mmc to show working examples for those cases. - Increase CONFIG_SYS_MAXARGS due to hush parsing bugs that would otherwise disallow 'setenv dfu_alt_info ${dfu_alt_info_nand}'. - Enable CONFIG_FAT_WRITE to allow updating on MMC Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com>
| * | am335x_evm: Add CONFIG_CMD_MTDPARTS and relevant defaultsTom Rini2013-04-10-0/+9
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * | am335x_evm: Define CONFIG_SYS_CACHELINE_SIZEPantelis Antoniou2013-04-10-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | drivers/usb/gadget/composite.c requires that this is defined early. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Tom Rini <trini@ti.com>
| * | dfu: NAND specific routines for DFU operationPantelis Antoniou2013-04-10-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | Support for NAND storage devices to work with the DFU framework. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com> Acked-by: Scott Wood <scottwood@freescale.com>
| * | nand: Extend nand_(read|write)_skip_bad with *actual and limit parametersTom Rini2013-04-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We make these two functions take a size_t pointer to how much space was used on NAND to read or write the buffer (when reads/writes happen) so that bad blocks can be accounted for. We also make them take an loff_t limit on how much data can be read or written. This means that we can now catch the case of when writing to a partition would exceed the partition size due to bad blocks. To do this we also need to make check_skip_len count not just complete blocks used but partial ones as well. All callers of nand_(read|write)_skip_bad are adjusted to call these with the most sensible limits available. The changes were started by Pantelis and finished by Tom. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com>
| * | dfu: Change indentation of defines in <dfu.h>Tom Rini2013-04-10-3/+3
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * | dfu: Support larger than memory transfers.Pantelis Antoniou2013-04-10-2/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously we didn't support upload/download larger than available memory. This is pretty bad when you have to update your root filesystem for example. This patch removes that limitation (and the crashes when you transfered any file larger than 4MB) by making raw image writes be done in chunks and making file maximum size be configurable. The sequence number is a 16 bit counter; make sure we handle rollover correctly. This fixes the wrong transfers for large (> 256MB) images. Also utilize a variable to handle initialization, so that we don't rely on just the counter sent by the host. Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com> Signed-off-by: Tom Rini <trini@ti.com>
| * | dfu: Increase DFU buffer size from 4MiB to 8MiBŁukasz Majewski2013-04-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Increase size of DMA buffer from 4MiB to 8MiB. This is necessary due to uImage size increase. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| * | Merge branch 'master' of git://www.denx.de/git/u-boot-cfi-flashTom Rini2013-04-04-20/+21
| |\ \
| | * | mtd: cfi_flash: Fix CFI flash driver for 8-bit bus supportaaron.williams@caviumnetworks.com2013-04-02-20/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit is based on that patch from aaron.williams@caviumnetworks.com with same commit title. pulled the same code changes into current u-boot tree. http://patchwork.ozlabs.org/patch/140863/ http://lists.denx.de/pipermail/u-boot/2011-April/089606.html This patch corrects the addresses used when working with Spansion/AMD FLASH chips. Addressing for 8 and 16 bits is almost identical except in the 16-bit case the LSB of the address is always 0. The confusion arose because the addresses in the datasheet for 16-bit mode are word addresses but this code assumed it was byte addresses. I have only been able to test this on our Octeon boards which use either an 8-bit or 16-bit bus. I have not tested the case where there's an 8-bit part on a 16-bit bus. This patch also adds some delays as suggested by Spansion. If a part can be both 8 and 16-bits, it forces it to work in 8-bit mode if an 8-bit bus is detected. Apart from the pulled changes, fixed few minor code cleanups and tested on 256M29EW, 512M29EW flashes. Before this fix: --------------- Bank # 1: CFI conformant flash (8 x 8) Size: 64 MB in 512 Sectors AMD Standard command set, Manufacturer ID: 0xFF, Device ID: 0xFF Erase timeout: 4096 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 1024 bytes After this fix: -------------- Bank # 1: CFI conformant flash (8 x 8) Size: 64 MB in 512 Sectors AMD Standard command set, Manufacturer ID: 0x89, Device ID: 0x7E2301 Erase timeout: 4096 ms, write timeout: 2 ms Buffer write timeout: 5 ms, buffer size: 1024 bytes Signed-off-by: Aaron Williams <aaron.williams@caviumnetworks.com> Signed-off-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com> Tested-by: Jagannadha Sutradharudu Teki <jaganna@xilinx.com>
| * | | Consolidate bool typeYork Sun2013-04-01-52/+9
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
| * | Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini2013-03-31-4/+83
| |\ \
| | * | RX-51: Add support for bootmenuPali Rohár2013-03-29-3/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * default bootmenu entries: attached kernel, internal eMMC memory, external SD card, u-boot boot order * in CONFIG_PREBOOT try load bootmenu.scr from first partition of internal eMMC memory (also known as MyDocs) which (should) overwrite default bootmenu entries * when keyboard slide is closed boot first menu entry * when keyborad slide is open show bootmenu Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | New command bootmenu: ANSI terminal boot menu supportPali Rohár2013-03-29-0/+42
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The "bootmenu" command uses U-Boot menu interfaces and provides a simple mechanism for creating menus with several boot items. When running this command the menu will be assembled as defined by a set of environment variables which contain a title and command key-value pairs. The "Up" and "Down" keys are used for navigation through the items. Current active menu item is highlighted and can be selected using the "Enter" key. The command interprets and generates various ANSI escape sequencies, so for proper menu rendering and item selection the used terminal should support them. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> [agust: various fixes and documentation updates] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | menu: export menu_default_choice() functionAnatolij Gustschin2013-03-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Checking the default menu item and obtaining its data can be useful in custom menu code. Export menu_default_choice() function which serves this purpose. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | menu: Add support for user defined item choice functionPali Rohár2013-03-29-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Selecting menu items is currently done in menu_interactive_choice() by reading the user input strings from standard input. Extend menu_interactive_choice() to support user defined function for selecting menu items. This function and its argument can be specified when creating the menu. Signed-off-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | | Merge branch 'for-v2013.04'Anatolij Gustschin2013-03-29-58/+33
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | Conflicts: drivers/video/Makefile Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | common/lcd.c: move the macro's to the c fileJeroen Hofstee2013-03-21-28/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hide the console macros since some reference global data which is no longer present. cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
| | * | common/lcd: cosmetic: clean up a bitJeroen Hofstee2013-03-21-21/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Make the brackets of the function calls more consistent - Remove really unnecessary brackets - Removes the extern from the function definitions - Remove curly brackets from single line statements - Remove lcd_setmem proto since it is already in common.h - Cleanup comments, remove useless comments - Remove NOT_USED_SO_FAR ifdef - Cleanup coding style cc: Anatolij Gustschin <agust@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> [agust: rebased the original patch] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | common/lcd.c: remove global lcd_baseJeroen Hofstee2013-03-21-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lcd_base is available as gd->fb_base as well, there is no need to keep a seperate copy. For completeness the ack of Bo Shen is for the atmel part. Cc: Alessandro Rubini <rubini@unipv.it> Cc: Anatolij Gustschin <agust@denx.de> Cc: Bo Shen <voice.shen@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Simon Glass <sjg@chromium.org> Cc: Stelian Pop <stelian@popies.net> Cc: Tom Warren <twarren@nvidia.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> [agust: also fix cm_t35 board while rebasing] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | common/lcd.c: cleanup use of global variablesJeroen Hofstee2013-03-21-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | console_col, console_row, lcd_line_length, lcd_console_address had to be declared in board / driver specific code, but were not actually used there on many boards. Get rid of the global variables. for completeness, the ack of Bo Shen is for the atmel part Cc: Alessandro Rubini <rubini@unipv.it> Cc: Anatolij Gustschin <agust@denx.de> Cc: Bo Shen <voice.shen@atmel.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Simon Glass <sjg@chromium.org> Cc: Stelian Pop <stelian@popies.net> Cc: Tom Warren <twarren@nvidia.com> Acked-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl> [agust: rebased and fixed cm_t35 board] Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | lcd, pxafb: move the pxafb to drivers/videoJeroen Hofstee2013-03-21-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the lcd code was compiled unconditionally for pxa also add CONFIG_PXA_LCD to the boards using this framebuffer. Since driver/video contains video and lcd drivers, add lcd to the name to make clear it belongs to common/lcd.c. cc: Anatolij Gustschin <agust@denx.de> cc: Cliff Brake <cliff.brake@gmail.com> cc: Marek Vasut <marek.vasut@gmail.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
| | * | lcd, mpc8xx: move the mpc8xx driver to drivers/videoJeroen Hofstee2013-03-21-1/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the lcd code was compiled unconditionally in arch also add CONFIG_MPC8XX_LCD to the boards using this driver. cc: Anatolij Gustschin <agust@denx.de> cc: Wolfgang Denk <wd@denx.de> Signed-off-by: Jeroen Hofstee <jeroen@myspectrum.nl>
| | * | common/lcd.c: cleanup use of global variablesWolfgang Denk2013-03-21-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | lcd_color_fg and lcd_color_bg had to be declared in board specific code, but were not actually used there; in addition, we have getter / setter functions for these, which were not used either. Get rid of the global variables, and use the getter function where needed (so far no setter calls are needed). Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Alessandro Rubini <rubini@unipv.it> Cc: Anatolij Gustschin <agust@denx.de> Cc: Bo Shen <voice.shen@atmel.com> Cc: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Nikita Kiryanov <nikita@compulab.co.il> Cc: Simon Glass <sjg@chromium.org> Cc: Stelian Pop <stelian@popies.net> Cc: Tom Warren <twarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Jeroen Hofstee <jeroen@myspectrum.nl> [agust: also fixed cm_t35 board while rebasing] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | | | arm/km: add support for kmsuv31 boardHolger Brunck2013-04-12-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This board is from a u-boot point of view a mixture between kmnusa and a standard km_kirkwood board. We have our u-boot environment in the spi NOR flash, but we have a direct connection between the kirkwood and the piggy. A FPGA is connected via the PCIe interface. So we only have to select the specific features in the board setup. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
* | | | arm/km: use CONFIG_NAND_ECC_BCHHolger Brunck2013-04-12-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch from 1-bit ecc to 4-bit ecc. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-By: Prafulla Wadaskar <prafulla@marvell.com>
* | | | arm/km: rename BOARD_LATE_INIT to CONFIG_BOARD_LATE_INITHolger Brunck2013-04-12-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 9660e442 cosmetic: s/BOARD_LATE_INIT/CONFIG_BOARD_LATE_INIT removes BOARD_LATE_INIT and uses CONFIG_BOARD_LATE_INIT instead. Therefore we have to use this define. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Valentin Longchamp <valentin.longchamp@keymile.com> cc: Prafulla Wadaskar <prafulla@marvell.com> Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
* | | | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-12-8/+10
|\ \ \ \