summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* arm, davinci: Use CONFIG_SPL_PAD_TO for padding the SPL in an ais imageChristian Riesch2014-05-13-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commits commit b7b5f1a16ca66dfdd817e7339f0e263a5b9f2758 Author: Albert ARIBAUD <albert.u.boot@aribaud.net> da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT and commit e7497891e34efe5cb2b3a3dc7c6c096c012ede28 Author: Albert ARIBAUD <albert.u.boot@aribaud.net> cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT replaced CONFIG_SPL_MAX_SIZE by CONFIG_SPL_MAX_FOOTPRINT. However, CONFIG_SPL_MAX_SIZE is used in the Makefile for padding the SPL when preparing an u-boot.ais image. By removing CONFIG_SPL_MAX_SIZE said commits broke the ais image of the da850evm and cam_enc_4xx configurations. This patch converts the u-boot.ais target to use CONFIG_SPL_PAD_TO instead of CONFIG_SPL_MAX_SIZE for padding the SPL and adds a #define CONFIG_SPL_PAD_TO where it is required. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Reported-by: Tom Taylor <ttaylor.tampa@gmail.com> Cc: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Cc: Heiko Schocher <hs@denx.de> Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
* siemens, draco: add new targetEgli, Samuel2014-05-13-0/+92
| | | | | | | Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Reviewed-by: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* omap3_beagle: xM A/B validate new dtb exits in file systemRobert Nelson2014-05-13-1/+7
| | | | | | | | | Fall back to previous dtb used when omap3-beagle-xm-ab.dtb doesn't exist in file system Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tom Rini <trini@ti.com> CC: Nishanth Menon <nm@ti.com> Acked-by: Tom Rini <trini@ti.com>
* omap3_beagle: use omap3-beagle-xm-ab.dtb for the xM AB revisionRobert Nelson2014-05-13-1/+1
| | | | | | | | | | | As of v3.15-rc3, omap3-beagle-xm-ab.dtb now exists with the usb hub (ehci) enabled. For older kernels versions, cherry pick from mainline: ef78f3869c37c480f1d58462a760a40dabc823f4 Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tom Rini <trini@ti.com> CC: Nishanth Menon <nm@ti.com>
* ARM: OMAP5: Power: add LDO2 support for Palmas driverDmitry Lifshitz2014-05-13-0/+4
| | | | | | Add defines required to turn on LDO2 regulator. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
* siemens: cosmetic: rename project_dirEgli, Samuel2014-05-13-1/+1
| | | | | | | Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* siemens: change LED indication in DFU modeEgli, Samuel2014-05-13-2/+7
| | | | | | | | | | | | | In order to have the same LED indication like in another product when ready for updating, enable only red led and disable status LED when entering DFU mode. The status LED is only switched off when defined in board file. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* siemens: cosmetic: remove unused and rename definesEgli, Samuel2014-05-13-2/+1
| | | | | | | | | | | | For dxr2 board DXR2_IOCTRL_VAL is set by data in EEPROM. In pxm2 board it does not make sense to have dxr2 as prefix. Replace it with more meaningful DDR prefix. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Cc: Pascal Bach <pascal.bach@siemens.com> Cc: Roger Meier <r.meier@siemens.com> Cc: Heiko Schocher <hs@denx.de> Cc: Wolfgang Denk <wd@denx.de>
* config: k2hk_evm: Add generic board supportKhoronzhuk, Ivan2014-05-13-0/+1
| | | | | | | We should use generic board in order the ARM maintainer be able to remove arch/arm/lib/board.c Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* Merge branch 'u-boot/master'Albert ARIBAUD2014-05-09-6758/+2131
|\ | | | | | | | | | | | | Conflicts: drivers/net/Makefile (trivial merge)
| * Merge branch 'master' of git://www.denx.de/git/u-boot-microblazeTom Rini2014-05-06-1/+1
| |\
| | * microblaze: Wire up OF support for emacliteStephan Linz2014-05-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | - expand the condition with CONFIG_OF_CONTROL Signed-off-by: Stephan Linz <linz@li-pro.net> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
| * | common: fixed linker-list exampleMateusz Zalega2014-05-05-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | Last argument shouldn't be there. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Cc: Tom Rini <trini@ti.com>
| * | USB: gadget: added a saner gadget downloader registration APIMateusz Zalega2014-05-05-23/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Preprocessor definitions and hardcoded implementation selection in g_dnl core were replaced by a linker list made of (usb_function_name, bind_callback) pairs. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Marek Vasut <marex@denx.de>
| * | am335x: dfu: disable DFU in am335x_evm SPL buildMateusz Zalega2014-05-05-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Future patches will make DFU too large to fit in this board's SPL build. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Tom Rini <trini@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
| * | dfu: mmc: change offset base handlingMateusz Zalega2014-05-05-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previously offsets handled by dfu_fill_entity_mmc(), defined in boards' CONFIG_DFU_ALT were treated as hexadecimal regardless of their prefix, which sometimes led to confusion. This patch forces usage of explicit numerical base prefixes. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * | dfu: mmc: raw data write fixMateusz Zalega2014-05-05-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When user attempted to perform a raw write using DFU (vide dfu_fill_entity_mmc) with MMC interface not initialized before, get_mmc_blk_size() reported invalid (zero) block size - it wasn't possible to write ie. a new u-boot image. This commit fixes that by initializing MMC device before use in dfu_fill_entity_mmc(). While fixing initialization sequence, I had to change about half of dfu_fill_entity_mmc's body, so I refactored it on the way to make it, IMHO, considerably more comprehensible. Being left as dead code, get_mmc_blk_size() was removed. Tested on Samsung Goni. Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * | usb: dfu: fix boards wo USB cable detectionMateusz Zalega2014-05-05-11/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Former usb_cable_connected() patch broke compilation of boards which do not support this feature. I've renamed usb_cable_connected() to g_dnl_usb_cable_connected() and added its default implementation to gadget downloader driver code. There's only one driver of this kind and it's unlikely there'll be another, so there's no point in keeping it in /common. Previously this function was declared in usb.h. I've moved it, since it's more appropriate to keep it in g_dnl.h - usb.h seems to be intended for USB host implementation. Existing code, confronted with default -EOPNOTSUPP return value, continues as if the cable was connected. CONFIG_USB_CABLE_CHECK was removed. Change-Id: Ib9198621adee2811b391c64512f14646cefd0369 Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Lukasz Majewski <l.majewski@samsung.com>
| * | part: header fixMateusz Zalega2014-05-05-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implementation made use of types defined in common.h, even though it wasn't #included. It worked in circumstances when .c files included every needed header (all). Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Cc: Tom Rini <trini@ti.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * | mmc: mmc header fixMateusz Zalega2014-05-05-0/+1
| |/ | | | | | | | | | | | | | | | | | | | | Structure definition used type block_dev_desc_t, defined in part.h, which wasn't included in mmc.h. It worked only in circumstances when common.h, or another header using part.h was incuded in implementation files. Change-Id: I5b203928b689887e3e78beb00a378955e0553eb7 Signed-off-by: Mateusz Zalega <m.zalega@samsung.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> Cc: Minkyu Kang <mk7.kang@samsung.com>
| * driver/mxc_i2c: Move static data structure to global_dataYork Sun2014-04-29-0/+3
| | | | | | | | | | | | | | | | | | This driver needs a data structure in SRAM before SDRAM is available. This is not alway the case using .data section. Moving this data structure to global_data guarantees it is writable. Signed-off-by: York Sun <yorksun@freescale.com> CC: Troy Kisky <troy.kisky@boundarydevices.com>
| * Merge branch 'master' of git://www.denx.de/git/u-boot-arcTom Rini2014-04-25-3/+3
| |\
| | * axs101: bump DDR size from 256 to 512 MbAlexey Brodkin2014-04-25-2/+2
| | | | | | | | | | | | Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| | * axs101: increase EEPROM page write delay from 32 to 64 msecAlexey Brodkin2014-04-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | With 32 milliseconds delay on some boards EEMPROM got written inconsistently. With 64 msec all of our existig boards show properly written EEPROM. Cc: Tom Rini <trini@ti.com> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxTom Rini2014-04-25-0/+587
| |\ \
| | * | mpc83xx: add ids8313 supportHeiko Schocher2014-04-23-0/+587
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add support for the ids8313 board. CPU: e300c3, MPC8313, Rev: 2.1 at 396 MHz, CSB: 132 MHz I2C: ready SPI: ready DRAM: 128 MiB (DDR2, 32-bit, ECC off, 264 MHz) Flash: 8 MiB NAND: 128 MiB Net: TSEC0, TSEC1 [PRIME] public key on NOR flash start Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-04-25-915/+1295
| |\ \ | | |/ | |/|
| | * powerpc/T4QDS: add two stage boot of nand/sdShaohui Xie2014-04-22-21/+95
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2 stage NAND/SD boot loader using SPL framework. PBL initialise the internal SRAM and copy SPL, this further initialise DDR using SPD and environment and copy u-boot from NAND/SD to DDR, finally SPL transfer control to u-boot. NOR uses CS1 instead of CS2 when NAND boot, fix it. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t2080rdb: some update for t2080rdbShengzhou Liu2014-04-22-4/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - update readme. - add CONFIG_SYS_CORTINA_FW_IN_* for loading Cortina PHY CS4315 ucode from NOR/NAND/SPI/SD/REMOTE. - update cpld vbank with SW3[5:7]=000 as default vbank0 instead of previous SW3[5:7]=111 as default vbank. - fix CONFIG_SYS_I2C_EEPROM_ADDR_LEN to 2. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t208xrdb: Add support of 2-stage NAND/SPI/SD bootShengzhou Liu2014-04-22-17/+91
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2-stage NAND/SPI/SD boot loader using SPL framework. PBL initializes the internal CPC-SRAM and copy SPL(160K) to it, SPL further initializes DDR using SPD and environment and copy u-boot(768K) from SPI/SD/NAND to DDR, finally SPL transfers control to u-boot. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t208xqds: Add support of 2-stage NAND/SPI/SD bootShengzhou Liu2014-04-22-20/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2-stage NAND/SPI/SD boot loader using SPL framework. PBL initializes the internal CPC-SRAM and copy SPL(160K) to it, SPL further initializes DDR using SPD and environment and copy u-boot(768 KB) from SPI/SD/NAND to DDR, finally SPL transfers control to u-boot. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> [York Sun: fix boards.cfg for T2081QDS_SDCARD and _SPIFLASH] Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/mpc85xx: Add Differential SYSCLK config support T1040Nikhil Badola2014-04-22-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for clock sourcing from sysclk(100MHz) for usb on T104xRDB and T1040QDS. This requires changing reference divisor and multiplication factor to derive usb clock from sysclk. Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/85xx: Enhance get_sys_info() to check clocking modevijay rai2014-04-22-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040 and it's variants provide "Single Oscillator Source" Reference Clock Mode. In this mode, single onboard oscillator(DIFF_SYSCLK) can provide the reference clock (100MHz) to the following PLLs: • Platform PLL • Core PLLs • USB PLL • DDR PLL, etc The cfg_eng_use0 of porsr1 register identifies whether the SYSCLK (single-ended) or DIFF_SYSCLK (differential) is selected as the clock input to the chip. get_sys_info has been enhanced to add the diff_sysclk so that the various drivers can be made aware of ths diff sysclk configuration and act accordingly. Other changes: -single_src to ddr_refclk_sel, as it is use for checking ddr reference clock -Removed the print of single_src from get_sys_info as this will be -printed whenever somebody calls get_sys_info which is not appropriate. -Add print of single_src in checkcpu as it is called only once during initialization Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * Powerpc/mpc8536DS: Increase SPI/SD uboot Image size to 768KHaijun.Zhang2014-04-22-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot binary size for Freescale mpc8536DS platforms is 512KB. This has been reached to upper limit of the platforms and causig linker error. So increase the u-boot binary size to 768KB. Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/mpc85xx:Update MONITOR_LEN for 768KB u-boot sizePrabhakar Kushwaha2014-04-22-19/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | U-boot binary size has been increased from 512KB to 768KB. So update CONFIG_SYS_MONITOR_LEN to reflect the same. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t104xrdb: Add support of NAND, SD, SPI boot for T104xRDBPrabhakar Kushwaha2014-04-22-17/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2 stage NAND, SD, SPI boot loader using SPL framework. here, PBL initialise the internal SRAM and copy SPL(160KB). This further initialise DDR using SPD and environment and copy u-boot(768 KB) from NAND to DDR. Finally SPL transer control to u-boot. Initialise/create followings required for SPL framework - Add spl.c which defines board_init_f, board_init_r - update tlb and ddr accordingly Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/b4qds:Add support of 2 stage NAND boot-loaderPrabhakar Kushwaha2014-04-22-7/+57
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of 2 stage NAND boot loader using SPL framework. here, PBL initialise the internal SRAM and copy SPL(160KB). This further initialise DDR using SPD and environment and copy u-boot(768 KB) from NAND to DDR. Finally SPL transer control to u-boot. Initialise/create followings required for SPL framework - Add spl.c which defines board_init_f, board_init_r - update tlb and ddr accordingly Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * driver: Add support of image load for MMC & SPI in SPLPrabhakar Kushwaha2014-04-22-0/+2
| | | | | | | | | | | | | | | | | | | | | Add support of loading image, binary for MMC and SPI during SPL boot. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t1042rdb_pi: Disable CONFIG_QE and CONFIG_U_QEPrabhakar Kushwaha2014-04-22-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | T1042RDB_PI board does not have QE connector. So disable CONFIG_QE and CONFIG_U_QE for T1042RDB_PI Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * T1040QDS/U-QE: Add u-qe support to t1040qdsZhao Qiang2014-04-22-0/+3
| | | | | | | | | | | | | | | | | | | | | Add u-qe support for t1040qds Signed-off-by: Zhao Qiang <B45475@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * mpc85xx: Add deep sleep support on T104xRDBTang Yuantian2014-04-22-0/+4
| | | | | | | | | | | | | | | | | | | | | Add deep sleep support on T104xRDB platforms. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * mpc85xx: Add deep sleep support on T1040QDSTang Yuantian2014-04-22-0/+4
| | | | | | | | | | | | | | | | | | | | | Add deep sleep support on T1040QDS platform. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * mpc85xx/t104x: Add deep sleep framework supportTang Yuantian2014-04-22-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When T104x soc wakes up from deep sleep, control is passed to the primary core that starts executing uboot. After re-initialized some IP blocks, like DDRC, kernel will take responsibility to continue to restore environment it leaves before. Signed-off-by: Tang Yuantian <Yuantian.Tang@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * fsl/usb: Increase TXFIFOTHRESH value for usb write in T4 Rev 2.0Nikhil Badola2014-04-22-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase TXFIFOTHRES field value in TXFILLTUNING register of usb for T4 Rev 2.0. This decreases data burst rate with which data packets are posted from the TX latency FIFO to compensate for latencies in DDR pipeline during DMA. This avoids Tx buffer underruns and leads to successful usb writes Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com> Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * board/t104xrdb: Add support of CPLDPrabhakar Kushwaha2014-04-22-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040RDB and T1042RDB_PI has CPLD. Here CPLD controls board mux/features. This support of CPLD includes - files and register defintion - Commands to swtich alternate bank and default bank Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/T1040: add mtdparts suppport for T104xRDB and T1040QDSPrabhakar Kushwaha2014-04-22-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | We use dynamical mtdparts partition instead of directly puting mtd partitions nodes in device tree. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/T208xRDB: add mtdparts suppportShengzhou Liu2014-04-22-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | We use dynamical mtdparts partition instead of directly puting mtd partitions nodes in device tree. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/T208xQDS: add mtdparts suppportShengzhou Liu2014-04-22-0/+17
| | | | | | | | | | | | | | | | | | | | | | | | We use dynamical mtdparts partition instead of directly puting mtd partitions nodes in device tree. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/t104xrdb: Unification of T104xRDB header filesvijay rai2014-04-22-719/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | T1040RDB, T1042RDB header files are very similar so merged into new header file T104xRDB. T104xRDB header file can support both T1040RDB and T1042RDB_PI header. Patch makes following changes -Update Boards.cfg file for T1040RDB and T1042RDB_PI -Add new T104xRDB header file -Delete T1040RDB, T1042RDB_PI header file Signed-off-by: Vijay Rai <vijay.rai@freescale.com> Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| | * powerpc/t208xqds: fix nor chip selection when nand bootShengzhou Liu2014-04-22-10/+18
| | | | | | | | | | | | | | | | | | | | | | | | NOR flash is on CS1 instead of CS2 when NAND boot. So correct NOR chip selection to CS1 from CS2. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
generated by cgit v1.1 at 2024-11-18 00:34:07 +0000