summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* ARM: mx53: video: Add IPUv3 LCD support for M53EVKMarek Vasut2013-12-17-0/+16
| | | | | | | | This patch adds support for the AMPIRE 800x480 LCD panel that is available for M53EVK. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* ARM: mx6: Update non-Freescale boards to include CPU errata.Eric Nelson2013-12-17-0/+4
| | | | | | | | | The CPU errata expressed in include/configs/mx6_common.h apply to all i.MX6DQ and i.MX6DLS parts. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Reviewed-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefan Roese <sr@denx.de>
* configs: imx: Remove CONFIG_SYS_SPD_BUS_NUM optionFabio Estevam2013-12-17-7/+0
| | | | | | | | | | | | | | According to the README: "- CONFIG_SYS_SPD_BUS_NUM If SPD EEPROM is on an I2C bus other than the first one, specify here. Note that the value must resolve to something your driver can deal with." There is no SPD EEPROM on the imx boards, so ged rid of this option. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Stefano Babic <sbabic@denx.de>
* udoo: Add SATA support on uDoo Board.Giuseppe Pagano2013-12-17-0/+12
| | | | | | | | Add SATA support on uDoo Board. Signed-off-by: Giuseppe Pagano <giuseppe.pagano@seco.com> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
* udoo: Add ethernet support (FEC + Micrel KSZ9031).Giuseppe Pagano2013-11-28-0/+21
| | | | | | | | | | Add Ethernet and networking support on uDoo board (FEC +phy Micrel KSZ9031). Ethernet speed is currently limited to 10/100Mbps. Signed-off-by: Giuseppe Pagano <giuseppe.pagano@seco.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> CC: Stefano Babic <sbabic@denx.de> CC: Fabio Estevam <fabio.estevam@freescale.com>
* mx6sabresd: Add SPI NOR supportFabio Estevam2013-11-28-0/+12
| | | | | | | | | | | | | mx6sabre board has a m25p32 SPI NOR connected to ECSPI1 port. Add support for it. This patch allows the SPI NOR flash to be succesfully detected: => sf probe SF: Detected M25P32 with page size 256 Bytes, erase size 64 KiB, total 4 MiB Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* nitrogen6x: Remove unused OCOTP optionsFabio Estevam2013-11-27-10/+0
| | | | | | | | | OCOTP driver is currently selected via CONFIG_MXC_OCOTP option. Remove the old OCOTP related options, as they are not used anymore. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Eric Nelson <eric.nelson@boundarydevices.com>
* configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boardsFabio Estevam2013-11-13-10/+0
| | | | | | | | There is no real benefit in adding the board name into U-boot's prompt, so remove the custom CONFIG_SYS_PROMPT definitions so that the standard "=> " prompt is used across FSL boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* arm, am335x: update for the siemens boardsSamuel Egli2013-11-12-33/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - dxr2: define unused pins as input - do not enable RTC32K OSC on dxr2 board - update default environment - add splashpos=m,m to default environment, so splash screen is always centered. - adapt environment for bootcount feature - add altbootcmd to default environment - rut: SPL add early reset pulse for eth-phy, maXTouch and display - rut: display timing aenderungen - siemens boards: adapt for background color = white - add boutcount feature for the siemens boards store the bootcount in the environment, as we have no softreset save registers on this hardware. Use therefore the CONFIG_BOOTCOUNT_ENV bootcount driver. - change spi mode from 3 to 0 for the lcd init - add gpio pin for lcd reset with state 0 and add mdelay - siemens boards: use own USB id's - add dfu serial and device number for siemens boards Add for the siemens boards the possibility to define in dfu mode, the iSerialNumber and the bcdDevice fields in the USB Device descriptor. - fix upgrade mechanism based on bootcount Correct location of saveenv and remove not active variable. Add CONFIG_BOOT_RETRY_TIME and CONFIG_RESET_TO_RETRY to reboot board in case of empty kernel partition. Without these defines an empty kernel partition leads to an abort of boot process and one remains in u-boot prompt. - general cleanup of dxr2, pxm2 and rut boards all: * Remove net boot from bootcmd Ping can cause a crash on boards without ethernet phy. net_nfs command is used only for development * Add reset at the end of bootcmd In order to have an immediate reset of the boot when bootcmd fails, add reset at the end of bootcmd. rut: * add nand_img_size dxr2: * update nand_img_size * ddr3 timings updated with iocontrol property that can be modified via eeprom. New default parameters from software leveling with draco ES2. Signed-off-by: Samuel Egli <samuel.egli@siemens.com> Signed-off-by: Pascal Bach <pascal.bach@siemens.com> Signed-off-by: Roger Meier <r.meier@siemens.com> Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Matthias Michel <matthias.michel@siemens.com> Cc: Tom Rini <trini@ti.com>
* omap730p2: Remove boardTom Rini2013-11-11-539/+0
| | | | Signed-off-by: Tom Rini <trini@ti.com>
* am33xx: Make SoC bootcount driver have its own symbolTom Rini2013-11-11-2/+6
| | | | | | | | | Some am33xx boards may not use the RTC block for bootcount (as it may not be wired up for the board) and use some other facility. So add another symbol for the bootcount driver for the IP block. Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Tom Rini <trini@ti.com>
* cm-t35: use gpio_led driver for status ledIgor Grinberg2013-11-11-4/+5
| | | | | | | | Switch to using the generic gpio_led driver instead of the private to cm_t35 board led implementation. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Tested-by: Nikita Kiryanov <nikita@compulab.co.il>
* arm, am33x: make RTC32K OSC enable configurableHeiko Schocher2013-11-11-0/+1
| | | | | | | | | | | | | | As http://www.denx.de/wiki/view/U-Boot/DesignPrinciples#2_Keep_it_Fast states: "Initialize devices only when they are needed within U-Boot" enable the RTC32K OSC only, if CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC is enabled. Enable this in ti_am335x_common.h, so all boards in mainline should work as before. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
* Merge branch 'iu-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-11-09-544/+534
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile board/compulab/cm_t35/Makefile board/corscience/tricorder/Makefile board/ppcag/bg0900/Makefile drivers/bootcount/Makefile include/configs/omap4_common.h include/configs/pdnb3.h Makefile conflicts are due to additions/removals of object files on the ARM branch vs KBuild introduction on the main branch. Resolution consists in adjusting the list of object files in the main branch version. This also applies to two files which are not listed as conflicting but had to be modified: board/compulab/common/Makefile board/udoo/Makefile include/configs/omap4_common.h conflicts are due to the OMAP4 conversion to ti_armv7_common.h on the ARM side, and CONFIG_SYS_HZ removal on the main side. Resolution is to convert as this icludes removal of CONFIG_SYS_HZ. include/configs/pdnb3.h is due to a removal on ARM side. Trivial resolution is to remove the file. Note: 'git show' will also list two files just because they are new: include/configs/am335x_igep0033.h include/configs/omap3_igep00x0.h
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-11-07-0/+303
| |\
| | * Revert "configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boards"Stefano Babic2013-11-04-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 178b8e15ade96c7bd59b9704b91ca51d27c391cd. Patch was merged too fast, without checking that another patch is fixing the reported issue globally - reverted. Signed-off--by: Stefano Babic <sbabic@denx.de>
| | * configs: imx: Make CONFIG_SYS_PROMPT uniform across FSL boardsFabio Estevam2013-10-31-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is no real benefit in adding the board name into U-boot's prompt. Use the simple "=> " prompt across FSL boards. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Otavio Salvador <otavio@ossystems.com.br>
| | * ARM: mxs: Add PPC-AG BG0900 boardMarek Vasut2013-10-17-0/+97
| | | | | | | | | | | | | | | | | | | | | | | | This board supports FEC Ethernet, SPI NOR and NAND flash. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de> Cc: Christoph Baumann <c.baumann@ppc-ag.de>
| | * udoo: Add initial support for mx6q udoo boardFabio Estevam2013-10-17-0/+206
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add basic support for mx6q udoo board. For further information about Udoo board: http://www.udoo.org/ Tested booting a mainline device tree kernel and a Yocto rootfs from mmc. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * | Merge branch 'u-boot-atmel/master' into 'u-boot-arm/master'Albert ARIBAUD2013-11-05-2/+37
| |\ \
| | * | ARM: ATMEL: eb_cpux9k2: fix TEXT_BASE for ramboot targetJens Scharsig (BuS Elektronik)2013-11-04-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since more functions are enabled, the eb_cpux9k2_ram target does not boot. This patch changed the TEXT_BASE, that the code fits between TEXT_BASE and ram end. Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| | * | arm: atmel: get rid of too many ifdefferyBo Shen2013-11-04-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Get rid of too many ifdeffery in usb ohci driver Add following two configuration for USB clock selecting - CONFIG_USB_ATMEL_CLK_SEL_PLLB: using PLLB as usb ohci input clock - CONFIG_USB_ATMEL_CLK_SEL_UPLL: using UPLL as usb ohci input clock Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| | * | arm: atmel: at91sam9n12ek: add usb host supportBo Shen2013-11-04-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add usb host support for at91sam9n12ek board. Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | | TI:omap5: Add rdaddr, use consistent loadaddr valuesTom Rini2013-11-01-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rdaddr was missing which is a common location for loading ramdisks to. loadaddr was higher than it needs to be, so use the same value other TI platforms use. Signed-off-by: Tom Rini <trini@ti.com>
| * | | cm_t35: turn on GPIO commandsNikita Kiryanov2013-11-01-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Turn on GPIO commands for cm-t35 and cm-t3730. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * | | cm_t35: reduce default bootdelay to 3 secondsNikita Kiryanov2013-11-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current default bootdelay of 10 seconds is too long. Reduce default bootdelay to 3 seconds. Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
| * | | dra7xx_evm: Enabled UART-boot mode and add dra7xx_evm_uart3 buildMinal Shah2013-11-01-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | UART booting is supported on this SoC, but via UART3 rather than UART1. Because of this we must change the board to use UART3 for all console access (only one UART is exposed on this board and a slight HW mod is required to switch UARTs). Signed-off-by: Minal Shah <minal.shah@ti.com> [trini: Make apply to mainline, reword commit] Signed-off-by: Tom Rini <trini@ti.com>
| * | | TI:armv7: Change CONFIG_SYS_SPL_ARGS_ADDR to a higher addressTom Rini2013-11-01-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With changes to increase the size of the device tree (required to move more data out of the kernel and into DT), loading the args at the old address leads to us overwriting things later on. To correct this, load the args file to where we load the device tree anyhow. This is also safe for non-DT booting as in either case we use r2 to pass in the location of things. Signed-off-by: Tom Rini <trini@ti.com>
| * | | am335x: Enable CONFIG_OMAP_WATCHDOG supportTom Rini2013-11-01-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | There is a board-specific portion for calling watchdog enable itself, in main U-Boot. Signed-off-by: Tom Rini <trini@ti.com>
| * | | tricorder: support 256MiB SDRAM on revision > DAndreas Bießmann2013-11-01-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: read kernel directly from NANDAndreas Bießmann2013-11-01-1/+2
| | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: switch to alternative memtestThomas Weber2013-11-01-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase the tested memory region for mtest and define CONFIG_SYS_MEMTEST_SCRATCH for CONFIG_SYS_ALT_MEMTEST Signed-off-by: Thomas Weber <thomas.weber@corscience.de> Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: Make u-boot fasterThomas Weber2013-11-01-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Silent u-boot and no bootdelay Signed-off-by: Thomas Weber <thomas.weber@corscience.de> Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: add led supportAndreas Bießmann2013-11-01-0/+14
| | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: panic() on unknown boardAndreas Bießmann2013-11-01-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Also hang() the board on panic(). Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: add tricordereeprom commandAndreas Bießmann2013-11-01-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The new tricordereeprom command can read and write the eeprom for hardware detection on tricorder devices. Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: add mtdparts to environmentAndreas Bießmann2013-11-01-5/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Before we always ran 'mtdparts default' which also set the mtdparts and mtdids environment. But if we changed that values by intention we will overwrite them with our default values. This is obviously bad! Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: add cmdline historyAndreas Bießmann2013-11-01-15/+57
| | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: use generic provided loadaddrAndreas Bießmann2013-11-01-1/+4
| | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: update flash partitioningAndreas Bießmann2013-11-01-18/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The new flash layout respects posible bad blocks in sectors reserved for e.g. SPL, u-boot, kernel, env a.s.o. Additionally this patch prepares for U-Boot Falcon mode for boot time saving. Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | tricorder: remove lcdmode from bootargsThomas Weber2013-11-01-4/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Thomas Weber <thomas.weber@corscience.de> Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
| * | | arm, da85x: update for the ipam390 boardHeiko Schocher2013-11-01-13/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - switch to correct ecc layout used by the RBL enable CONFIG_NAND_6BYTES_OOB_FREE_10BYTES_ECC - update default environment - change A2CR to correct value for UART boot mode - adapt cs3cfg timings for nand - change LED bootmode signalization Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
| * | | ARM: OMAP4: Convert to ti_armv7_common.hLokesh Vutla2013-11-01-165/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update omap4_common.h to use ti_armv7_common.h Testing: * Boot tested on OMAP4430 ES2.1 OMAP4460 ES1.1 SDP, OMAP4 PANDA/PANDA ES * Verified ./MAKEALL -s omap Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
| * | | OMAP3: igep00x0: rename config file to omap3_igep00x0.hJavier Martinez Canillas2013-11-01-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There seems to be a naming convention for the configuration files for boards using the same SoC family. This makes easier to do changes that affect different boards based on the same SoC. Since the IGEPv2 board and the IGEP COM Module use a TI OMAP35xx/DM37xx processor, is better to rename its board config to use this naming scheme. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
| * | | ARM: IGEP0033: rename config file to am335x_igep0033.hJavier Martinez Canillas2013-11-01-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There seems to be a naming convention for the configuration files for boards using the same SoC family. This makes easier to do changes that affect different boards based on the same SoC. Since the IGEP COM AQUILA use a TI AM335x processor is better to rename its board config to use this naming scheme. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
| * | | TI:am33xx: Add bootcount support to ti_am335x_common.hTom Rini2013-11-01-0/+7
| |/ / | | | | | | | | | | | | | | | | | | Enable the bootcount driver for am335x in general. We leave adding a bootlimit and altbootcmd to the environment to the board ports. Signed-off-by: Tom Rini <trini@ti.com>
| * | arm: Remove IXP425 boards pdnb3 and scpuStefan Roese2013-10-17-322/+0
| |/ | | | | | | | | | | | | | | | | | | Remove Prodrive pdnb3 board (including the scpu variant) support from mainline. As its unmaintained and not needed any more for quite some time. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Martijn de Gouw <martijn.de.gouw@prodrive.nl> Cc: Albert Aribaud <albert.u.boot@aribaud.net>
* | Merge branch 'master' of git://www.denx.de/git/u-boot-usbTom Rini2013-11-08-18/+28
|\ \
| * | usb, g_dnl: make iSerialNumber board configurableHeiko Schocher2013-11-08-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | add the possibility to set the iSerialNumber board specific. Default value for iSerialNumber is 0x0. This value can changed board specific through the new function g_dnl_set_serialnumber() which must be called from the board specific function g_dnl_bind_fixup(). Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Lukasz Majewski <l.majewski@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Lukasz Majewski <l.majewski@samsung.com>
| * | usb: ums: add ums exit feature by ctrl+c or by detach usb cablePrzemyslaw Marczak2013-11-08-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows exiting from UMS mode to u-boot prompt by detaching usb cable or by pressing ctrl+c. Add new config: CONFIG_USB_CABLE_CHECK. If defined then board file should provide function: usb_cable_connected() (include/usb.h) that return 1 if cable is connected and 0 otherwise. Changes v2: - add a note to the README Signed-off-by: Przemyslaw Marczak <p.marczak@samsung.com> Cc: Marek Vasut <marex@denx.de>
generated by cgit v1.1 at 2024-11-02 21:33:08 +0000