summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* drivers: net: cpsw: remove hard coding bd ram for cpswMugunthan V N2013-07-26-0/+1
| | | | | | | BD ram address may vary in various SOC, so removing the hardcoding and passing the same information through platform data Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
* am335x_evm: Correct CONFIG_CMD_SPL_WRITE_SIZETom Rini2013-07-26-1/+1
| | | | | | | | We use CONFIG_CMD_SPL_WRITE_SIZE when reading/writing the args portion of falcon mode to NAND. Previously it was half the size of the eraseblock which is too small, increase to eraseblock size. Signed-off-by: Tom Rini <trini@ti.com>
* am335x_evm: Update eMMC falcon mode locationsTom Rini2013-07-26-3/+3
| | | | | | | | | | | The previous location used for the "args" portion of falcon mode was too small to allow for a device tree to be saved there, so move the location slightly and increase the size. In addition, our previous kernel location was part of the area we set aside for U-Boot itself, so move it up a bit higher. Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
* am335x_evm: Correct DFU ALT settings for falcon modeTom Rini2013-07-26-3/+8
| | | | | | | | | | Now that we have falcon mode enabled, the partiton numbers for NAND have changed, and we need to list entries for updating these parts of the system. While adding falcon mode entires for eMMC (raw), we round up the limit on U-Boot for ease of math later. Signed-off-by: Tom Rini <trini@ti.com> Reviewed-by: Peter Korsgaard <jacmet@sunsite.dk>
* Merge branch 'u-boot/master' into u-boot-arm/masterAlbert ARIBAUD2013-07-25-14693/+3111
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-nds32Tom Rini2013-07-25-3/+121
| |\
| | * nds32: Enable the function of passing parameters to Linuxken kuo2013-07-24-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add a header file, setup.h, which copy from Linux source code, this file contain structures are used to pass initialisation parameters to Linux. Enable this function on adp-ag101/adp-ag101p target Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com> Cc: Macpaul Lin <macpaul@gmail.com>
| | * nds32: Enable SDIO and EXT2 command support for Andes boardken kuo2013-07-24-0/+4
| | | | | | | | | | | | | | | Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com> Cc: Macpaul Lin <macpaul@gmail.com>
| | * nds32: Enable two banks of SDRAM on Andes boardken kuo2013-07-24-2/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | The original adp-ag101/adp-ag101p initialize only one bank(64MB) by default at boot time, but it is not enough for some application, so increasing to two banks(128M). Signed-off-by: Kuan-Yu Kuo <ken.kuoky@gmail.com> Cc: Macpaul Lin <macpaul@gmail.com>
| | * pci: move pci_ftpci100.h to include/faraday/ftpci100.hGabor Juhos2013-07-24-0/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Even though the header files is used only by the pci_ftpci100 driver, it contains declaration for a function which is used by external code. Move the header file to a common location which lets external code use it. Compile tested only. Cc: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
| | * block: constify sect_buf argument of ide_write_dataGabor Juhos2013-07-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a const keyword to the sect_buf argument of ide_write_data to fix the following warning: cmd_ide.c: In function '__ide_output_data': cmd_ide.c:548: warning: passing argument 2 of 'ide_write_data' discards qualifiers from pointer target type /devel/u-boot.git/include/ide.h:76: note: expected 'ulong *' but argument is of type 'const ulong *' Also modify the driver-model documentation to match with the new prototype. Compile tested only. Cc: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
| * | qemu-malta: Update for SPDX license identifiersTom Rini2013-07-25-18/+3
| | | | | | | | | | | | Signed-off-by: Tom Rini <trini@ti.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-mipsTom Rini2013-07-25-0/+685
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflict over SPDX changes means that one change was effectively dropped as it was fixing typos in a removed hunk of text. Conflicts: arch/mips/cpu/mips64/start.S Signed-off-by: Tom Rini <trini@ti.com>
| | * | MIPS: qemu-malta: bring up ethernetGabor Juhos2013-07-24-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qemu emulates a PCNET PCI card for the Malta CoreLV board. Enable the pcnet driver and add board specific ethernet initialization function to bring it up. Also enable the CONFIG_CMD_NET and CONFIG_CMD_PING options. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
| | * | MIPS: qemu-malta: add PCI supportGabor Juhos2013-07-24-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Qemu emulates the Galileo GT64120 System Controller which provides a CPU bus to PCI bus bridge. The patch adds driver for this bridge and enables PCI support for the emulated Malta board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
| | * | MIPS: qemu-malta: enable flash supportGabor Juhos2013-07-24-2/+7
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
| | * | MIPS: qemu-malta: add support for emulated MIPS Malta boardGabor Juhos2013-07-24-0/+104
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add minimal support for the MIPS Malta CoreLV board emulated by Qemu. The only supported peripherial is the UART. This is enough to boot U-Boot to the command prompt both in little and big endian mode. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
| | * | MIPS: import gt64120.h header from LinuxGabor Juhos2013-07-24-0/+550
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Linux specific register access macros, the extern function declarations and the UL suffixes has been removed. The header file will be used for the qemu-malta board. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Cc: Daniel Schwierzeck <daniel.schwierzeck@googlemail.com>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2013-07-24-1159/+1453
| |\ \ \ | | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
| | * | fdtdec: Add compatible string for High speed i2cnaveen krishna chatradhi2013-07-23-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds a new COMPAT string exynos5-hsi2c for high speed i2c controller available on exynos5 SoCs from Samsung. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
| | * | vf610: Add I2C support for Vybrid VF610 platformAlison Wang2013-07-23-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds I2C support for Vybrid VF610 platform and adds I2C0 support to VF610TWR board. Signed-off-by: Alison Wang <b18965@freescale.com>
| | * | arm/km: fix u-boot update functionalityHolger Brunck2013-07-23-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Due to the new I2C framework we need to adapt the u-boot update function. Due to the new framework all i2c leafs behind a mux are present in the system and not only those who are defined and used. So it is bus number 5 after the rework. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> cc: Heiko Schocher <hs@denx.de> cc: Prafulla Wadaskar <prafulla@marvell.com>
| | * | i2c, ppc4xx_i2c: switch to new multibus/multiadapter supportDirk Eibach2013-07-23-252/+301
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Cc: Heiko Schocher <hs@denx.de> Cc: Stefan Roese <sr@denx.de> Tested-by: Stefan Roese <sr@denx.de>
| | * | tegra: i2c: Enable new CONFIG_SYS_I2C frameworkSimon Glass2013-07-23-16/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This enables CONFIG_SYS_I2C on Tegra, updating existing boards and the Tegra i2c driver to support this. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Heiko Schocher <hs@denx.de>
| | * | i2c, multibus, keymile: get rid of EEprom_ivm envvariableHeiko Schocher2013-07-23-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | as the keymile boards use now the new i2c multibus/multiadapter framework, remove the EEprom_ivm Environmentvar, as not longer needed. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-By: Holger Brunck <holger.brunck@keymile.com>
| | * | i2c, multibus: get rid of CONFIG_I2C_MUXHeiko Schocher2013-07-23-21/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_I2C_MUX is replaced through the new i2c multibus/multiadapter framework, configured through CONFIG_SYS_I2C. As CONFIG_I2C_MUX is only used on the keymile boards, and they are now completely moved to the new framework, remove CONFIG_I2C_MUX. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Holger Brunck <holger.brunck@keymile.com> Tested-By: Holger Brunck <holger.brunck@keymile.com>
| | * | i2c, fsl_i2c: switch to new multibus/multiadapter supportHeiko Schocher2013-07-23-495/+519
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - added to fsl_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
| | * | i2c, soft-i2c: switch to new multibus/multiadapter supportHeiko Schocher2013-07-23-376/+419
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - added to soft_i2c driver new multibus/multiadpater support - adapted all config files, which uses this driver Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Simon Glass <sjg@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
| | * | i2c: common changes for multibus/multiadapter supportHeiko Schocher2013-07-23-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Cc: Henrik Nordström <henrik@henriknordstrom.net>
| | * | i2c: add i2c_core and prepare for new multibus supportHeiko Schocher2013-07-23-9/+209
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This Patch introduce the new i2c_core file, which holds the I2C core functions, for the rework of the multibus/ multiadapter support. Also adds changes in i2c.h for the new I2C multibus/multiadapter support. This new support can be activated with the CONFIG_SYS_I2C define. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Simon Glass <sjg@chromium.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Stephen Warren <swarren@wwwdotorg.org>
| * | Add eCos-2.0 SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-65/+2
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | Add LGPL-2.1+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-27/+2
| | | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-13439/+863
| |/ | | | | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* | highbank: enable keyed autoboot stopRob Herring2013-07-25-0/+2
| | | | | | | | | | | | | | Restrict autoboot interruption to "s" or "d" keys. This will prevent some unwanted stopping and also allow disabling the reset on command timeout. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | ARM: highbank: setup peripherals based on power domain statusRob Herring2013-07-25-0/+1
| | | | | | | | | | | | | | | | Accessing powered down peripherals will hang the bus, so check power domain status before initializing SATA and fixup the FDT to disable unused peripherals. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | ARM: highbank: enable reset on command timeoutRob Herring2013-07-25-0/+3
| | | | | | | | | | | | | | Enable resetting on command timeout. The timeout is set with environment setting bootretry. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* | ARM: highbank: update config optionsRob Herring2013-07-25-2/+12
|/ | | | | | | | | | | | | Various changes to highbank config: Enable EFI partitions Enable ext4 and FAT filesystems Enable bootz command and raw initrd Increase cmd and print buffer size to 1K Change serial baudrate to 115200 Enable hush shell Signed-off-by: Rob Herring <rob.herring@calxeda.com>
* arm:trats:fix: Correction of loaddtb environment variable.Łukasz Majewski2013-07-19-1/+1
| | | | | | | | Missing space for loaddtb command has been added. When missing, ext4load fails with wrong number of passed parameters. Acked-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* mpc85xx: Add gdsys ControlCenter Digital boardDirk Eibach2013-07-16-0/+522
| | | | | | | | | | | | | | | | | The gdsys ControlCenter Digital board is based on a Freescale P1022 QorIQ SOC. It boots from SPI-Flash but can be configured to boot from SD-card for factory programming and testing. On board peripherals include: - 2x GbE - Lattice ECP3 FPGA connected via PCIe - mSATA RAID1 - USB host - DisplayPort video output - Atmel TPM Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc> Signed-off-by: Andy Fleming <afleming@freescale.com>
* tpm: add AUTH1 cmds for LoadKey2 and GetPubKeyReinhard Pfau2013-07-16-0/+174
| | | | | | | | | | | | | | | | | | | | | | Extend the tpm library with support for single authorized (AUTH1) commands as specified in the TCG Main Specification 1.2. (The internally used helper functions are implemented in a way that they could also be used for double authorized commands if someone needs it.) Provide enums with the return codes from the TCG Main specification. For now only a single OIAP session is supported. OIAP authorized version of the commands TPM_LoadKey2 and TPM_GetPubKey are provided. Both features are available using the 'tpm' command, too. Authorized commands are enabled with CONFIG_TPM_AUTH_SESSIONS. (Note that this also requires CONFIG_SHA1 to be enabled.) Signed-off-by: Reinhard Pfau <reinhard.pfau@gdsys.cc> Signed-off-by: Dirk Eibach <dirk.eibach@gdsys.cc> Acked-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Andy Fleming <afleming@freescale.com>
* Fix ext2/ext4 filesystem accesses beyond 2TiBFrederic Leroy2013-07-15-4/+6
| | | | | | | | | | | | | | | | | With CONFIG_SYS_64BIT_LBA, lbaint_t gets defined as a 64-bit type, which is required to represent block numbers for storage devices that exceed 2TiB (the block size usually is 512B), e.g. recent hard drives We now use lbaint_t for partition offset to reflect the lbaint_t change, and access partitions beyond or crossing the 2.1TiB limit. This required changes to signature of ext4fs_devread(), and type of all variables relatives to block sector. ext2/ext4 fs uses logical block represented by a 32 bit value. Logical block is a multiple of device block sector. To avoid overflow problem when calling ext4fs_devread(), we need to cast the sector parameter. Signed-off-by: Frédéric Leroy <fredo@starox.org>
* Revert "MIPS: Jz4740: Add qi_lb60 board support"Tom Rini2013-07-15-206/+0
| | | | | | | | | | The files board/qi/qi_lb60/qi_lb60.c and include/configs/qi_lb60.h were licensed under the GPL v3 or later, and not v2 or later. As this is incompatible with the project, revert this board support until the responsible parties are available to re-license (if so desired) under GPL v2. Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-07-12-27/+492
|\ | | | | | | | | | | | | | | | | | | Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial. Conflicts: arch/arm/dts/exynos5250.dtsi Signed-off-by: Tom Rini <trini@ti.com>
| * Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-07-12-12/+13
| |\
| | * mx53ard: Change default environment to cope with OE changesOtavio Salvador2013-07-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx51evk: Change default environment to cope with OE changesOtavio Salvador2013-07-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Stefano Babic <sbabic@denx.de>
| | * wandboard: Change default environment to cope with OE changesOtavio Salvador2013-07-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6slevk: Change default environment to cope with OE changesOtavio Salvador2013-07-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx6qsabrelite: Change default environment to cope with OE changesOtavio Salvador2013-07-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * mx53loco: Change default environment to cope with OE changesOtavio Salvador2013-07-12-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | OpenEmbedded has change partitioning layout of generated image so it does not raise warnings during the boot regarding unkown partition being used for U-Boot. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Jason Liu <r64343@freescale.com>
generated by cgit v1.1 at 2024-11-17 20:53:53 +0000