| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
* Add mx7d_12x12_ddr3_arm2 target board support
* Initial support for mx7d_12x12_ddr3_arm2 target
board add support for base hardware eMMC, SD and
ECSPI boot.
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 51d69f7996cc6e6da8bb3f0af751549cb2435e44)
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
| |
* Allow to override mtest settings for target board
variants that differs on physical sdram memory size
Signed-off-by: Adrian Alonso <aalonso@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 6173a3954b83ce22e24c62bc8ee922007b0929a6)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The ARM errata 751472, 794072, 761320, 845369 only applied
to the following configuration:
This erratum affects configurations with either:
- One processor if the ACP is present
- Two or more processors
i.MX6 family does not have the ACP and thus only the MPCore system
will be impacted, which are the i.MX6DQ, i.MX6DL, and i.MX6QP.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
(cherry picked from commit 0db960784ba4f631ee5c0321b5d25f3b1ac55640)
|
|
|
|
|
|
|
|
|
|
| |
Under very rare timing circumstances, transitioning into streaming
mode might create a data corruption. Present on Two or more processors
or 1 core with ACP, all revisions. This erratum can be worked round
by setting bit[22] of the undocumented Diagnostic Control Register to 1.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
(cherry picked from commit 70ad44e523680de67dd8b7a7505d7f27799980ee)
|
|
|
|
|
|
|
| |
add this parameter in u-boot as a temporary workaround.
Signed-off-by: Han Xu <b45815@freescale.com>
(cherry picked from commit f0beee980914360c8783406ef8694974467eb07b)
|
|
|
|
|
|
|
|
| |
The mx7dsabresd uses new LCD TFT43AB which has 480 x 272 pixels.
Update panel info for this LCD.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit e77d667b20956a37de9d367a8914ef2fe79258df)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To enable the EPDC feature:
1. Uncomments CONFIG_SPLASH_SCREEN and CONFIG_MXC_EPDC settings
in mx7dsabresd.h
2. cd <kernel_dir>/firmware/imx
3. python ihex2bin.py -i epdc_ED060XD4C1_TC.fw.ihex -o epdc_splash.bin
4. cp epdc_splash.bin to [FAT partition on SD card]
Since the EPDC has pinmux conflicts with ENET and QSPI. These two
modules can't work at same time.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 8ba7f88f9efac9f90319b71644d3d1191f535d03)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
To enable the EPDC feature:
1. Uncomments CONFIG_SPLASH_SCREEN and CONFIG_MXC_EPDC settings
in mx7d_12x12_lpddr3_arm2.h
2. cd <kernel_dir>/firmware/imx
3. python ihex2bin.py -i epdc_ED060XD4C1_TC.fw.ihex -o epdc_splash.bin
4. cp epdc_splash.bin to [FAT partition on SD card]
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 414824dcb77a067213849d340cf92777e6546810)
|
|
|
|
|
|
|
|
| |
To support EPDC V2 on mx7d, update the mxc_epdc_fb.h for new registers
layout.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 04588deb8ad368e77ec3563aa012a520faa6cade)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Change to load EPDC waveform from FAT partition and allocate waveform
buffer, framebuffer and working buffer in dynamic manner not static.
So many EPDC configurations are removed.
To enable the EPDC feature, must define CONFIG_MXC_EPDC and CONFIG_SPLASH_SCREEN.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 4d55a4124be3a3a6288c3c845d17fd9d4f2b8b43)
Conflicts:
include/configs/mx6slevk.h
|
|
|
|
|
|
|
|
|
|
|
| |
This commit 155fa9af95ac5be857a7327e7a968a296e60d4c8
"spi: mxc: fix sf probe when using mxc_spi"
introduces "board_spi_cs_gpio" function to discard gpio in
CONFIG_SF_DEFAULT_CS for spi flash.
Follow this rule to make imx boards work fine.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Add CONFIG_DEFAULT_FDT_FILE macro and PHYS_SDRAM_SIZE.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Since i.MX6QP changes some CCM registers, so modify the clocks settings to
follow the hardware changes.
A new CONFIG_MX6QP is introduced here and is used for the CCM difference.
At default CONFIG_MX6Q is enabled along with the CONFIG_MX6QP.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 5e4d1537ce9a476c8404126350f05d8976c5aa35)
Conflicts:
arch/arm/cpu/armv7/mx6/clock.c
arch/arm/include/asm/arch-mx6/crm_regs.h
include/configs/mx6_common.h
|
|
|
|
|
|
|
| |
Upgrade to upstream way, using power_init_board.
Add pfuze300 support.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Add CONFIG_CMD_FASTBOOT
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
Change QSPI FLASH vendor config from to MACRONIX, otherwise the flash
device can't be recognized.
Also change default sf probe parameter to 0:0 which means bus 0, cs 0.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit f250cf69571851eb092252275418daf8de11a68e)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Update board codes to support GPMI NAND flash. Since the GPMI NAND needs
board rework, it is disabled at default. Two ways to enable GPMI NAND:
1. Define CONFIG_SYS_BOOT_NAND for NAND boot case
2. Modify the line 306 in mx7dsabresd.h from QSPI to NAND.
#define CONFIG_SYS_USE_QSPI /* Enable the QSPI flash at default */
to
#define CONFIG_SYS_USE_NAND /* Enable the NAND flash at default */
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 5db03facf3add6a95728bc97ac2300003a103932)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable android fastboot, recovery, booti features for mx7d sabresd
board by using new build target: mx7devkandroid_config
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit bfc2b467ddac9c6eccb3f39aad3663a959546b64)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When booting in eMMC fast boot, the uboot v2013.04 always hangs.
The root cause is that MMC host does not exit from boot mode after
bootrom loading image. So the first command 'CMD0' sent
in uboot will pull down the CMD line to low and cause errors.
This patch cleans the MMC boot register in "mmc_init" to put the
MMC host back to normal mode.
Signed-off-by: Ye Li <b37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
(cherry picked from commit 2ead2f9501c6d2571e0f5365bd808ed7c73257ef)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
drivers/mmc/fsl_esdhc.c
|
|
|
|
|
|
|
|
|
| |
Update driver codes and registers define for MX7. Implement udc callback
function in MX7 arch.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit e55c4f7bf5a66b34c2d01c42bac667cb3789b0c1)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add udc and fastboot support
We did not use the upstream way.
Currently use CI_UDC and USB_GAGDET of upstream can make fastboot work,
but lack of flash operation, so we still use our way.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
LCD_MONOCHROME is removed in commit f4469f50b0367820121ef2d313517d422ed70e1d.
Add related code back to support epdc.
In this patch, also include crm_regs.h in mx6slevk.c to make epdc code
be compiled ok.
COLOR_MASK is also added from commit a7de2953f51e70754190d3516167d58d27d17219
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Add thermal driver for mx7
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Change macro name to make driver support more platforms.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add i.MX7D SABRESD board BSP codes, with enabled modules:
UART, PMIC, USB/OTG, SD, eMMC, ENET, I2C, 74LV IOX.
Build target: mx7dsabresd_config
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 3bf52a153e2964d4fdc17f0e8cb816686cbb6c2b)
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes, configuration head file and build target for
19x19 DDR3L ARM2 board with basic functions:
ENET2, I2C, SD/eMMC/MMC, USB, QSPI, ECSPI, pfuze3000 PMIC.
Build target: mx7d_19x19_ddr3_arm2_config
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 58fd869e3097b7461fbfae3d94e3ebbd30ae2474)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes, configuration head file and build target for
12x12 LPDDR3 ARM2 board with basic functions:
ENET, I2C, SD/eMMC/MMC, USB, LCD Splash screen, QSPI, ECSPI,
pfuze3000 PMIC.
Note: pmic and video is still not upstream way
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit ac0d51ef07fdec880e6da318c08d521506640efa)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
boards.cfg
|
|
|
|
|
|
|
|
| |
Add mx7d_arm2.h for common part of all i.MX7D arm2 boards
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 6cc15cf8c4e1f9a08130c5e232f23af75407fa50)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
| |
Add common head file mx7_common.h for all i.MX7 platform
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit e38c9a7a543890e0879f89627a3f404d8068d602)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
| |
Add bsp and configuration file
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
| |
Add bsp and configuration file
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Update bsp and add configuration file
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Update bsp and add configuration file
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
| |
Update bsp and add configuration file
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Update mx6sxsabresd board and config file
Note:
Fastboot Android support is not added.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Update board header and bsp code in board/freescale/mx6slevk
Update board config file
Note:
Fastboot will be added in future
Android config is not included.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
If boot from usb, reset environment to default value.
Auto apply mfgtools setting and boot mfgtools kernel.
Signed-off-by: Frank Li <Frank.li@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is from commit b79371410aa44972dea53d5c19d256170928dcbd
"ENGR00315499-9: ARM:iMX6SL EVK: Add keyboard support"
Since board file already added related bsp and pin settings,
this patch only add driver.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement simple functionalities for MAX7310 GPIO input and output.
Because MAX7310 is a off-chip device and need to co-exist with
on-chip GPIO, new APIs are added specifically for expander device.
CONFIG_MAX7310_IOEXP is used to enable the MAX7310 driver. The I2C
related configurations also need to set together.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
(cherry picked from commit e3b699dab2c92268799b56c28c6a8fcda4f6110b)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
drivers/gpio/Makefile
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add EPDC splash screen feature for MX6SL EVK, and MX6DL SABRESD board.
- Currently, splash screen consists of a simple black border
around a white screen. Done this way to save in memory footprint.
- EPDC splash screen is disabled by default in the config file for MX6DL_SABRESD
and MX6SL_EVK. If left enabled, the U-Boot image will not boot correctly
(hang), since some additional content on the boot device (waveform file) is
required for EPDC splash to work correctly.
Please refer to Linux Reference Manual for how to flash WAVEFORM file.
Signed-off-by: Robby Cai <R63905@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
(cherry picked from commit b8ab9b3eabb94bbbc1eea63e7c0e2a87d2d645f4)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
Conflicts:
arch/arm/include/asm/arch-mx6/mx6sl_pins.h
board/freescale/mx6sabresd/mx6sabresd.c
board/freescale/mx6slevk/mx6slevk.c
drivers/video/Makefile
include/configs/mx6sabresd.h
include/configs/mx6slevk.h
include/lcd.h
drivers/video/Makefile
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add gis module, current gis is support vadc input.
Add power down function to lcdif driver.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793)
Conflicts:
drivers/video/Makefile
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add a new interface "mxs_lcd_panel_setup" to setup fb parameters and
specifies the LCDIF controller for multiple controllers of iMX6SX.
Pass fb parameters via "videomode" env remains work if the new interface
is not called before video initialization.
Modify LCDIF clock interface "mxs_set_lcdclk" to support multiple
LCDIF controllers on iMX6SX.
Signed-off-by: Ye.Li <B37916@freescale.com>
(cherry picked from commit 054fed6bab5b05a054c7e3cb5362635a40e6ee18)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Change HDMI video mode to VGA.
-Add pixel clock fraction part setting in IPU driver,
fix video mode timing issue.
-Add overflow state clear workaround,
fix kernel hang in HDMI driver issue.
-Correct IPU clock to 264MHz.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
(cherry picked from commit 45d532a0237f5baf2ec95b4364ec5bc94d312689)
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch is from two commits:
1.
748eac71fde78aa0c2e8cb3a3bab94bd994c06f5
ENGR00315499-5: Support i.MX6 1.2GHz via LDO bypass
Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz,
enable LDO bypass and setup PMIC voltages. LDO bypass is dependent
on the flatten device tree file.
2.
93d457e4c601ee5266bc30b7dfa5fa1bbfa8500a
MLK-9891-1: ARM: imx6: split WDOG_B setting from set_anatop_bypass() function
We set WDOG_B in set_anatop_bypass() before, because it is the only case, but now
on i.mx6sabreauto board, we didn't use ldo-bypass mode, but have to use WDOG_B to
reboot whole board, so split these code to independent function so that board file
can call it freely.
Board code is not included, board ldo bypass code will be in bsp update code.
Signed-off-by: Peng Fan <Peng.Fan@freescale.com>
|
|\ |
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Add support for Inverse Path USB armory board, an open source
flash-drive sized computer based on Freescale i.MX53 SoC.
http://inversepath.com/usbarmory
Signed-off-by: Andrej Rosano <andrej@inversepath.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Chris Kuethe <chris.kuethe@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Vagrant Cascadian <vagrant@debian.org>
Tested-By: Vagrant Cascadian <vagrant@debian.org>
Tested-by: Chris Kuethe <chris.kuethe@gmail.com>
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
Since commit 32df39c741788e ("mx5: fix get_reset_cause") we have the following
boot messages on a mx53qsb:
U-Boot 2015.04-rc5-00029-gd68df02 (Apr 06 2015 - 11:15:39)
CPU: Freescale i.MX53 rev2.1 at 800 MHz
Reset cause: POR
Board: MX53 LOCO
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1
In: serial
Out: serial
Err: serial
CPU: Freescale i.MX53 rev2.1 at 1000 MHz
Reset cause: unknown reset
Net: FEC [PRIME]
The CPU and Reset cause lines appear twice.
Initially mx53 boots at 800MHz, then at a later point the PMIC is configured via
I2C to raise the CPU voltage so that it can run at 1GHz.
To avoid such misleading double printings, disable printing cpu info for now.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
|
|\ \ |
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
There're 2 versions of motherboards that could be used in ARC SDP.
The only important difference for U-Boot is different NAND IC in use:
[1] v2 board (we used to support up until now) sports MT29F4G08ABADAWP
while
[2] v3 board sports MT29F4G16ABADAWP
They are almost the same except data bus width 8-bit in [1] and 16-bit
in [2]. And for proper support of 16-bit data bus we have to pass
NAND_BUSWIDTH_16 option to NAND driver core - which we do now knowing
board type we're running on.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
|
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
This consolidates the flash settings for the Integrator
and activates the new ARM flash image support for them
so images can be loaded by name from flash.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|