| Commit message (Collapse) | Author | Age | Lines |
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes for iMX6SX SABRE SD board to support SD/MMC,
USB, QSPI2 NOR Flash, Ethernet, I2C, PMIC and
M4 command boot(bootaux).
Add board build targets of SABER SD for boot device:
mx6sxsabresd --- SD/MMC
mx6sxsabresd_qspi2 --- QuadSPI2 NOR flash
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes for iMX6SX 19x19 DDR3 ARM2 board to support SD/MMC,
USB, QSPI2 NOR Flash, SPI NOR flash, WEIM NOR Flash, Ethernet,
I2C, PMIC and M4 command boot(bootaux).
Some features has conflicts, so can't be enabled at same time:
WEIM-NOR <---> QSPI pin conflict
QSPI <---> SPI-NOR u-boot driver conflict
SPI-NOR <---> SD2 pin conflict
Add board build targets of 19x19 DDR3 ARM2 for boot device:
mx6sx_19x19_ddr3_arm2 --- SD/MMC/eMMC
mx6sx_19x19_ddr3_arm2_spinor --- SPINOR on ECSPI4 CS0
mx6sx_19x19_ddr3_arm2_eimnor --- WEIM NOR flash
mx6sx_19x19_ddr3_arm2_qspi2 --- QuadSPI2 NOR flash
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes for iMX6SX 17x17 ARM2 board to support SD/MMC,
USB, QSPI2 NOR Flash, SPI NOR flash, NAND Flash, Ethernet, I2C
,PMIC and M4 command boot (bootaux).
Some features has conflicts, so can't be enabled at same time:
QSPI <---> NAND pin conflict
QSPI <---> SPI-NOR u-boot driver conflict
SPI-NOR <---> SD2 pin conflict
Add board build targets of 17x17 ARM2 for boot device:
mx6sx_17x17_arm2 --- SD/MMC/eMMC
mx6sx_17x17_arm2_spinor --- SPINOR on ECSPI4 CS0
mx6sx_17x17_arm2_nand --- NAND flash
mx6sx_17x17_arm2_qspi2 --- QuadSPI2 NOR flash
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
Using the CONFIG_SYS_GENERIC_BOARD for imx6 arm2 board and imx6slevk to
sync the deprecation process for generic board on upstream.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Sabreauto board has pin conflict (pin EIM_D18) between NOR flash
and i2c3. To enable the USB host, the i2c3 must be used to operate
the max7310 IO expander to output the VBUS power.
As SPINOR is enabled at default, it is impossible to use USB host
at same time. Thus, remove the SYS_USE_SPINOR from sabreauto
configurations to disable SPINOR.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Enable the fuse command config "CONFIG_CMD_FUSE" and OCOTP driver
"CONFIG_MXC_OCOTP" for imx6.
Users can use "sense" and "prog" to access the fuse directly,
or use "read" and "override" to access shadow registers.
Supported boards:
mx6qdlsabresd, mx6qdlsabreauto, mx6qdlarm2, mx6slevk
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
support
Add the android header file "mx6slevkandroid.h" for imx6slevk android support.
Fix header file and pin name problems in BSP codes.
Remove build warning in cmd_fastboot.c
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2
shared the same board with i.MX6Q ARM2 board since the i.MX6DL is
pin-pin compatible with i.MX6Q.
The patch also support the DDR 32-BIT mode option. Please define
CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT
mode.But due to the board design, it's 64bit DDR buswidth physically,
so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it.
The patch has been tested on the i.MX6Q and i.MX6DL arm2 board.
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
i.MX6dl ipu hsp clock rate is 270MHz in kernel.
In uboot, i.MX6dq ipu hsp clock rate is 264MHz,
and i.MX6dl ipu hsp clock rate is 198MHz.
Correct i.MX6dl ipu hsp clock rate,
display will get correct pixel clock now.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds IPUv3 splash screen support for the MX6Q/SDL
Sabreauto platforms. The default display is the Hannstar-XGA
LVDS panel. Users may set the uboot variable 'panel' to be
'HDMI' to switch to use HDMI splash screen. To avoid duplicate
configures on different sabre platforms, this patch moves
the IPUv3 splash screen relevant configures to the head file
'mx6qsabre_common.h'. Also, this patch modifies the condition
to build in EPDC splash screen feature in order to avoid the
build break due to the migration of the IPUv3 splash screen
relevant configures.
Signed-off-by: Liu Ying <Ying.Liu@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
For the SPI/WEIM NOR, it can't store all the images into it due to it's
capacity, we need one default mmc device to load the left image or rootfs.
The end user need change the default setting according to their needs.
For NAND/SATA boot, the storage is big enough to hold all the stuff.
For SD/MMC boot, mmcdev is dynamiclly created due to the boot SD/MMC slot.
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
support mfgtools
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
Change the bootz command in boot script to bootm
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
| |
The CONFIG_SYS_FLASH_PROTECTION will mark env partion of the NOR flash to
RO, which will cause some problems for the tools such as MFG, thus turn it
off to make life easier.
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
CONFIG_SUPPORT_EMMC_BOOT
Since we need to support eMMC plugin card on SD slots,
enable the CONFIG_SUPPORT_EMMC_BOOT for all imx6 boards and
remove the EMMC_ENV script.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
1. Add CONFIG_SYS_MMC_ENV_PART to save env in user area.
2. Set the image load partition to first VFAT partition.
3. Set the kernel rootfs partition to second partition.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
Add the fdt address and file name.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
| |
Change the loadaddr to 0x80800000 and fdt_addr to 0x83000000
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In order to support the secureboot, please turn on the
CONFIG_SECURE_BOOT in
"include/configs/mx6qsabre_common.h" ---- sabreauto or sabresd
"include/configs/mx6slevk.h" ---- imx6slevk
"include/configs/mx6qarm2.h" ---- arm2
By default, the CONFIG_SECURE_BOOT is disabled.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
| |
This patch add the plugin mode support for imx6slevk board.
In order to enable the plugin mode, please turn on the
CONFIG_USE_PLUGIN in the include/configs/mx6slevk.h
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
| |
This patch add the plugin mode support for sabreauto board.
In order to enable the plugin mode, please turn on the
CONFIG_USE_PLUGIN in the include/configs/mx6qsabre_common.h
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
| |
This patch add the plugin mode support for arm2 board.
In order to enable the plugin mode, please turn on the
CONFIG_USE_PLUGIN in the include/configs/mx6qarm2.h
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
Current console buffer is 256 bytes long, it is too small.
increase it to 1K.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
This patch adds the SATA support for i.mx6qsabresd and
i.mx6qsabreauto board
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
| |
1. The i2c2 bus is setup twice, remove the duplication.
2. The i2c settings are duplicated in mx6qsabreauto.h and mx6sabre_common.h,
remove it from mx6qsabreauto.h
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
The CONFIG_SYS_I2C is enabled on i.mx6 boards. So the CONFIG_SYS_I2C_SLAVE becomes
to unused. Remove this setting.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
1. Change CONFIG_MMCROOT to mmcblk0p2.
Kernel always sets the first availiable MMC/SD device to mmcblk0
2. Make the MMC ENV DEV/PART independent of ENV_IS_IN_MMC
3. Add the CONFIG_SYS_MMC_ENV_PART to 0 (user area) for u-boot env saving.
CONFIG_SYS_MMC_ENV_PART: was used to tell the u-boot which
emmc (boot)partition to be used for the env_mmc.Usually, the
emmc card will have 2 boot partitions, boot1 and boot2.
0: means user area
1: means boot partition 1
2: means boot partition 2
If user want to use the boot partition to store the u-boot env, please
change the CONFIG_SYS_MMC_ENV_PART to which boot partition you want.
4. Add the CONFIG_SYS_MMC_IMG_LOAD_PART for the partition number where the kernel
and DTB will load from. At default, it is the first partition in VFAT format.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add the GPMI nand support to the iMX6 sabreauto:
--Enable the GPMI NAND at default.
--Enable the clocks
--Set the default environment for nand boot
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
Add the WEIM-NOR support
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
| |
This patch adds the SPI-NOR support for the i.mx6q/dl/solo:sabresd/auto board:
- Support the SPI-NOR function with sf command,
- Support the enviroment from SPI-NOR when CONFIG_SYS_BOOT_SPINOR
Signed-off-by: Jason Liu <r64343@freescale.com>
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
| |
The DTB for mx6qsabreauto is empty. To support more iMX6 sabreauto boards,
remove this DTB in building.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
iMX6 boards
1. Make the DDR size configurable based on the boards.cfg
2. Make the FDT file configurable based on the boards.cfg
3. Add DDR and boot configuration script for iMX6dl.
Change default boot from SD card.
The DDR script has been updated to the v1.5 version from ddr-scripts-rel
commit: bfd157a Updated MX6DL and MX6DQ ARD and SabreSD scripts.
Signed-off-by: Ye.Li <B37916@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This patch adds support for the Android boot-image format. The header
file is from the Android project and got slightly alterted so the struct +
its defines are not generic but have something like a namespace. The
header file is from bootloader/legacy/include/boot/bootimg.h. The header
parsing has been written from scratch and I looked at
bootloader/legacy/usbloader/usbloader.c for some details.
The image contains the physical address (load address) of the kernel and
ramdisk. This address is considered only for the kernel image.
The "second image" defined in the image header is currently not
supported. I haven't found anything that is creating this.
v3 (Rob Herring):
This is based on http://patchwork.ozlabs.org/patch/126797/ with the
following changes:
- Rebased to current mainline
- Moved android image handling to separate functions in
common/image-android.c
- s/u8/char/ in header to fix string function warnings
- Use SPDX identifiers for licenses
- Cleaned-up file source information:
android_image.h is from file include/boot/bootimg.h in repository:
https://android.googlesource.com/platform/bootable/bootloader/legacy
The git commit hash is 4205b865141ff2e255fe1d3bd16de18e217ef06a
usbloader.c would be from the same commit, but it does not appear
to have been used for any actual code.
v4:
- s/andriod/android/
- Use a separate flag ep_found to track if the entry point has been set
rather than using a magic value.
Cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Tom Rini <trini@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
-Change HDMI video mode to VGA.
-Add pixel clock fraction part setting in IPU driver,
fix video mode timing issue.
-Add overflow state clear workaround,
fix kernel hang in HDMI driver issue.
-Correct IPU clock to 264MHz.
Signed-off-by: Sandor Yu <R01008@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When booting in eMMC fast boot, the uboot v2013.04 always hangs.
The root cause is that MMC host does not exit from boot mode after
bootrom loading image. So the first command 'CMD0' sent
in uboot will pull down the CMD line to low and cause errors.
This patch cleans the MMC boot register in "mmc_init" to put the
MMC host back to normal mode.
Signed-off-by: Ye Li <b37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Implement simple functionalities for MAX7310 GPIO input and output.
Because MAX7310 is a off-chip device and need to co-exist with
on-chip GPIO, new APIs are added specifically for expander device.
CONFIG_MAX7310_IOEXP is used to enable the MAX7310 driver. The I2C
related configurations also need to set together.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
| |
Add BSP codes to support SPI NOR flash read, write and erase by using
"sf" command.
In addition, add a new configuration "mx6slevk_spinor" for building
the uboot that can be booted from SPI NOR flash and stored the
environments variables in it.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
Enable the USB EHCI for the imx6slevk board. Add VBUS control
pin settings and related BSP codes.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
| |
Enable the USB EHCI on sabresd and arm2 boards to support USB mass
storage device.
Pins are configured in board_ehci_hcd_init for VBUS control.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
imx6 boards (sabresd, sabreauto, arm2 and slevk) have multiple SD/MMC ports to boot.
But current uboot hard code the SD/MMC port for environment variables storage. So
if customer changes a port without modifying the configuration "CONFIG_SYS_MMC_ENV_DEV",
error will issue at saving and loading environment.
Implement a mechanism to detect SD/MMC port from SRC SMBR register, and override the
default "mmc_get_env_devno". The "board_late_mmc_env_init" is used to set "mmcdev"
when booting from SD/MMC port. Finally after booting from SD/MMC, the environment storage
device and "mmcdev" are both set to current SD/MMC port. Customers don't need to re-build
the image if booting from different SD/MMC port.
This patch also adds SD1 and SD3 support to imx6slevk BSP, and adds support for sabreauto
SD1 slot on base board.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Support android features:
fastboot, booti command and recovery for sabresd SD, sabresd eMMC,
sabreauto SD, sabreauto NAND.
For all booting media (SD, eMMC, NAND), inherits the partitions layout
from v2009.08. Fastboot will detect the booting media to replace
hardcoding fastboot device. SATA is not supported.
FDT is supported to use the "unused" fields in bootimg header which
requires the FDT to be combined into the boot.img.
For non-FDT boot.img, the "unused" fields should left to NULL and is
compatible to boot.
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
| |
i.MX6sl evk has keyboards on the board, so add mxc_keyb driver to
support key press checking.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
If boot from usb, reset environment to default value.
Auto apply mfgtools setting and boot mfgtools kernel.
Signed-off-by: Frank Li <Frank.li@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Add EPDC splash screen feature for MX6SL EVK, and MX6DL SABRESD board.
- Currently, splash screen consists of a simple black border
around a white screen. Done this way to save in memory footprint.
- EPDC splash screen is disabled by default in the config file for MX6DL_SABRESD
and MX6SL_EVK. If left enabled, the U-Boot image will not boot correctly
(hang), since some additional content on the boot device (waveform file) is
required for EPDC splash to work correctly.
Please refer to Linux Reference Manual for how to flash WAVEFORM file.
Signed-off-by: Robby Cai <R63905@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
fastboot
Android fastboot leans on the USB gadget driver to communicate with host. Porting
the imx_udc driver from v2009.08 with two changes: adding resource/memory release
APIs and replacing the uncached memory with cache flush&invalidate operations.
Pins and Clocks initialization are added to support boards:
mx6qdlsabresd, mx6qdlsabreauto, mx6slevk
Signed-off-by: Ye.Li <B37916@freescale.com>
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
Add check for 1.2GHz core speed. If Speed grading fuse is for 1.2GHz,
enable LDO bypass and setup PMIC voltages. LDO bypass is dependent
on the flatten device tree file.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
| |
Support generating plugin images. Make sure not to effect the size
of DCD images.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
| |
Enabled CONFIG_SYS_GENERIC_BOARD for i.MX6 sabresd boards.
Signed-off-by: Nitin Garg <nitin.garg@freescale.com>
|
|
|
|
|
|
|
|
| |
Add CONFIG_SYS_GENERIC_BOARD to use common/board_[fr].c for kzm9g.
Signed-off-by: Tetsuyuki Kobayashi <koba@kmckk.co.jp>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
|
|
|
|
|
|
|
|
|
|
|
| |
Commit d016dc42cedbf6102e100fa9ecb58462edfb14f8 changed the layout of BCH8 SW
on omap3 boards. We need to adopt the ecc layout for the nand_spl_simle
driver to avoid wrong ecc errors.
Signed-off-by: Andreas Bießmann <andreas.biessmann@corscience.de>
Cc: Thomas Weber <thomas.weber@corscience.de>
Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
|