summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* ENGR00178989: Disable secrity boot configs.Terry Lv2012-04-05-1/+3
| | | | | | | Security boot need to use fuse item. Thus it should not be enabled as default. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00139223-1 [MX6Q] Secure Boot, enable HAB on ARM2 platform (Stage 1)Eric Sun2012-04-01-0/+82
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The first stage of High Assurance Boot (HAB) is the authentication of U-boot. A CST tool is used to generate the CSF data, which include public key, certificate and instruction of authentication process. Then it is attached to the original u-boot.bin The IVT should be modified to contain a pointer to the CSF data. The original u-boot.bin is with size between 0x27000 to 0x28000. For convinence, we first extend the u-boot.bin to 0x2F000 (with fill 0xFF). Then concatenate it with the CSF data. The combined image is again extend to a fixed length (0x31000), which is used as the IVT size parameter. The new memory layout is as the following. U-Boot Image +-------------+ | Blank | |-------------| 0x400 | IVT |-----------------------+ |-------------| | | | | | | | | | | |Remaining UB | | CSF pointer | | | | | | | | | |-------------| | | | | | Fill Data | | | | | |-------------| 0x2F000 <-------------+ | | | CSF Data | | | |-------------| | | | Fill Data | | | +-------------+ 0x31000 HAB APIs are ROM implemented, the entry table is located in a fixed location in the ROM. We export them so that during the HAB we can have some information about the secure boot process. For convinience some wrapper API is implemented based on the HAB APIs. - get_hab_status : used to dump information of authentication result - authenticate_image : used by u-boot to authenticate uImage For security hardware to function, CAAM related clock (CG0[4~6]) must be open. They are default closed in the original U-boot. "hab_caam_clock_enable" and "hab_caam_clock_disable" are created to open and close these clock gates. The generation of CSF data is not in the scope of this patch. CST tool will be used for this purpose. The procedure will be introduced in another document. Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00178024 mx6solo sabreauto: add nosmp arm_freq=800 by defaultLily Zhang2012-03-30-2/+3
| | | | | | | Add "nosmp arm_freq=800" options for mx6solo sabreauto board by default Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00178547 i.mx6dl sabresd: add android config fileLin Fuzhen2012-03-30-0/+57
| | | | | | | add android config file; support booti fastboot command and etc. Signed-off-by: Lin Fuzhen <fuzhen.lin@freescale.com>
* ENGR00177909: mx6q/mx6dl SabreSD: SPI-NOR flash not probed as expectedJason Liu2012-03-26-12/+12
| | | | | | | | | | | | SPI NOR flash(m25p32-vmw6tg) not probed and function as expected, this due to the lack of iomux pad config and incorrect CS line. This patch fix the above issue and also fix the mfg config file (For the code readable, I intent to omit the following checkpatch warning: in the iomux/mx6_pins.h WARNING: line over 80 characters) Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00177905 : i.mx6q sabresd: add fec auto discover phy configuration.Fugang Duan2012-03-26-1/+2
| | | | | | | | - i.mx6q sabresd revA ethernet phy addr is 0 (PHYADDRESS1-PHYADDRESS0:00) , but revB ethernet phy address is 0x1 (PHYADDRESS1-PHYADDRESS0:01). To avoid to change hardware, add auto discover phy address configuration. Signed-off-by: Fugang Duan <B38611@freescale.com>
* ENGR00177657: Add mfg configs for mx6dl sabresd and mx6solo sabreautoTerry Lv2012-03-23-0/+587
| | | | | | Add mfg configs for mx6dl sabresd and mx6solo sabreauto. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00176837-4 - imx6solo sabreauto : remove Ethernet phy MICREL macro.Fugang Duan2012-03-22-1/+0
| | | | | | | - FEC detect phy OUID to check phy type, so remove MICREL macro in board config file. Signed-off-by: Fugang Duan <B38611@freescale.com>
* ENGR00177587 MX6Q_ARM2: add android config for this board.Zhang Jiejing2012-03-22-0/+83
| | | | | | | add android config to this board. only basic boot support. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00177244 - imx6 : Use common fsl_sys_rev to check board reversionFugang Duan2012-03-20-0/+10
| | | | | | | | | - Use fsl_sys_rev to check Sebreauto board reversion. - Add macro define for expedient print the board and chip name. mx6_chip_name() mx6_board_rev_name() Signed-off-by: Fugang Duan <B38611@freescale.com>
* ENGR00176834-2 - i.MX6DL sabresd: board bringupFugang Duan2012-03-20-0/+323
| | | | | | | | | | | | | The serial of patches adds the initial support for mx6dl sabra sd board: - DDR3 400MHz@64bit, 1G, 256M*4 - SD/MMC basic operations - Add PIN/IOMUX support for mmx6dl sabresd. - Ethernet is ok for 100/1000Mbps. - OTP fuse Signed-off-by: Fugang Duan <B38611@freescale.com>
* ENGR00176834-1 - [imx6] : add fsl_system_rev to check chip and board.Fugang Duan2012-03-20-1/+20
| | | | | | | | | | | | | | | - Add fsl_system_rev to distinguish chip ID and board reversion. - Add some api: mx6_chip_is_dq() mx6_chip_is_dl() mx6_chip_is_solo() mx6_chip_is_sololite() mx6_board_is_reva() mx6_board_is_revb() mx6_board_is_revc() Signed-off-by: Fugang Duan <B38611@freescale.com>
* ENGR00177070 android: isolate booti command to fix build.Zhang Jiejing2012-03-16-0/+3
| | | | | | | | | | fix build error invoke by this patch: commit e3303f5b59df570c1f76b043d85e42be3dc7a63f Author: Lily Zhang <r58066@freescale.com> Date: Fri Mar 9 21:16:51 2012 +0800 Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00176347-5 mx6solo sabreauto: set system_revLily Zhang2012-03-13-1/+4
| | | | | | | | | | | | | | | | | Add set_system_rev function. The layout of system_rev is: bit 0-7: Chip Revision ID. Read from Anatop register bit 8-11: Board Revision ID. Read from fuse OCOTP_GP1[15:8] 1: RevA Board 0: RevB board, Unknown board bit 12-19: Chip Silicon ID. Read from Anatop register 0x63: i.MX 6Dual/Quad 0x61: i.MX 6Solo/DualLite board_is_rev(system_rev,BOARD_REV_1) can be used to distinguish RevB board. board_is_rev(system_rev,BOARD_REV_2) is for RevA board. Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00176347-1 mx6solo sabreauto: add configuration supportLily Zhang2012-03-13-0/+328
| | | | | | | | | | | | | | | | | | | | The serial of patches adds the initial support for mx6solo sabra auto board: - DDR3 400MHz@32bit - SD/MMC basic operations - SPI-NOR basic operations - OTP fuse - clock command - Anatop regulator command - splash screen support by enabling "CONFIG_SPLASH_SCREEN" Because i.mx6solo share the same ARD board with i.mx6dq, the same board file is shared between i.mx6dq and i.mx6solo. CONFIG_MX6DL configuration is used to distinguish the difference. This patch is used to add mx6solo sabreauto configuration support. Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00176328 change fastboot vid to google orignalZhang Jiejing2012-03-07-5/+5
| | | | | | | Change fastboot vender id to orignal ID to avoid install USB driver. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00176235 mx6 ARD: Add splash screen supportLily Zhang2012-03-06-1/+1
| | | | | | | | | | | | | | | | | | | This patch adds splash screen support for MX6 ARD. Changes: - Configure GPIO_3 as I2C3_SCL - Change MAX7310 I2C address as 0x30 - Enable LVDS power Usage: 1. To enable splash screen by default, define CONFIG_SPLASH_SCREEN in mx6q_sabreauto.h 2. Config U-boot with followed command:() setenv splashimage '0x30000000' #Set splash position as Center setenv splashpos 'm,m' #Set LVDS via LVDS bridge 0 setenv lvds_num 0 Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00176186 mx6dq ARD: add MFG tool supportLily Zhang2012-03-06-0/+299
| | | | | | Add MFG tool support for i.MX6DQ ARD board Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00175981-2 mx53 smd android: fix build errorLily Zhang2012-03-02-1/+1
| | | | | | | | | Fix the following build error when building mx53_smd_android config: mx53_smd_android.h:175: error: expected identifier or xx before string constant Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00175981-1 mx53 smd: add CPU 1.2GHz configurationLily Zhang2012-03-02-2/+8
| | | | | | | | | CONFIG_CPU_1_2G is used to enable 1.2GHz@1.3V. To enable 1.2GHz by default, enable CONFIG_CPU_1_2G into config file. For example, uncomment CONFIG_CPU_1_2G in mx53_smd.h or mx53_smd_android.h. Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00175117 [MX6DL LPDDR2 Board] Apply Initializtion script and enable U-BootEric Sun2012-02-29-0/+320
| | | | | | | | | | | | | | | | | Apply script "Mx6DL_init_LPDDR2_400MHz_Micron_1.1.inc" in IVT, make U-boot work for the LPDDR2 Board. The Make target name for the new board is "MX6DL_ARM2_LPDDR2_CONFIG" The script is provided by Chen Wei - B26879 for a quick bring up, which don't have a corresponding compass link. It is uploaded to CR ticket page for reference. Originally for MX6DL DDR3 board, "CONFIG_MX6DL" is defined. It is used by "board/freescale/mx6q_arm2/flash_header.S" to select the correct IVT. Since MX6DL LPDDR2 board also define this macro, for distiguish purpose, another 2 macros "CONFIG_MX6DL_DDR3", "CONFIG_MX6DL_LDPPR2" are defined Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00175091 MX6Q_SABRESD: android: add recovery checkZhang Jiejing2012-02-27-0/+4
| | | | | | | | define a new macro to show which mmc bus was main storage in recovery check, only check the main storage /cache partition. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00174868 mx6dl arm2: change the default console as ttymxc3Lily Zhang2012-02-27-1/+1
| | | | | | | The default console on i.MX6DL ARM2 CPU board is ttymxc3 Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00174841 [U-Boot]Add a command to erase any pre-saved environmentEric Sun2012-02-27-28/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A "destroyenv" command is provided to erase any pre-save environment in the boot storage. The command simply add 1 to the CRC section and write it back to the storage. Per the logic of U-Boot, this means after a reset, the software will recognize the stored environment settings as "damaged" and turn to use the default one, which is defined in "default_environment" With this command, platform bring up owner can maintain a "ready-to-use" environment settings in software which others can use very conviniently. U-boot users can also use it to do a environment restore if they want. ----------------------------------- Usage Example: > destroyenv invalidate the CRC write invalidate enviroment data to storage Erasing SPI flash...Erasing SPI NOR flash 0xc0000 [0x2000 bytes] ..SUCCESS Writing to SPI flash...Writing SPI NOR flash 0xc0000 [0x2000 bytes] <- ram 0x276009b8 SUCCESS done > ----------------------------------- Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00174536-2 MX6Q_SABRE[SD/Lite]: change bootcmd to bootiZhang Jiejing2012-02-27-32/+13
| | | | | | change boot command and recovery command to booti. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00174536-1 booti: add booti command support.Zhang Jiejing2012-02-27-0/+110
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support booti command which can boot from a boot.img boot.img is a zImage + ramdisk.img + bootargs + boot addr which include these info can be used to avoid mis match between kernel and ramdisk, also can avoid commit to chagne default bootargs. For example: > booti mmc1 command will read the boot.img from 1M offset, and then parser the bootargs and ramdisk then do the boot from that zImage. > booti mmc1 recovery will going to read the recovery's partition no and offset and boot from recovery image. this recovery image also a zImage + ramdisk bootargs: if uboot have define a env var 'bootargs', booti command will use this bootargs as kernel cmdline if you want use boot.img 's bootargs, just type: > setenv bootargs in uboot to clear the bootargs in uboot env. our default uboot env will be NULL in config file. also, android use boot.img to support OTA. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00139213: Add read and change voltage support for mx6Terry Lv2012-02-16-0/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | dd read and change voltage support for mx6. For help, pls type "help regul" Detail command info: regul list - List all regulators' name regul show all - Display all regulators' voltage regul show core - Show core voltage in mV regul show periph - Show peripheral voltage in mV regul show <regulator name> - Show regulator's voltage in mV regul set core <voltage value> - Set core voltage in mV regul set periph <voltage value> - Set periph voltage in mV regul set <regulator name> <voltage value> - Set regulator's voltage in mV Example: MX6Q ARM2 U-Boot > regul list Name Voltage vddpu vddcore vddsoc vdd2p5 vdd1p1 vdd3p0 MX6Q ARM2 U-Boot > regul show all Name Voltage vddpu 1100000 vddcore 1100000 vddsoc 1200000 vdd2p5 2400000 vdd1p1 1100000 vdd3p0 3000000 MX6Q ARM2 U-Boot > regul show periph Name Voltage periph: 1100000 MX6Q ARM2 U-Boot > regul show core Name Voltage core: 1100000 MX6Q ARM2 U-Boot > regul set core 1100000 Set voltage succeed! Name Voltage core: 1100000 Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00174326 MX6Q_SABRESD: add android related function and config.Zhang Jiejing2012-02-15-1/+387
| | | | | | | | | | enable mfg profile. enable recovery mode. mx6q_sabresd board's usb otg have HW issue, disable it in android profile. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00174407 imx6dl: add MFG tool supportLily Zhang2012-02-14-0/+305
| | | | | | Add MFG tool support in imx6dl U-boot Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00174230: Move partition command from nand to sata in mx6Terry Lv2012-02-13-16/+24
| | | | | | | Move partition command from nand to sata in mx6 for nand don't need these partition command. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00174104-3: Fix mx6 iram boot configs' issueTerry Lv2012-02-13-28/+2
| | | | | | | | Two issues are fixed: 1. Enlarge malloc size to 10K. 2. Too many configs in sabresd's iram config, remove redundent configs. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00174104-2: Add mx6dl iram boot configTerry Lv2012-02-13-0/+168
| | | | | | Add mx6dl iram boot config. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00174221 imx6dl remove unnecessary configs for NANDAllen Xu2012-02-10-4/+0
| | | | | | | CONFIG_DOS_PARTITION, CONFIG_CMD_FAT, CONFIG_CMD_EXT2 are only for MMC and SATA, remove from NAND config segment Signed-off-by: Allen Xu <allen.xu@freescale.com>
* ENGR00174155-3 i.mx6sdl: enable i.mx6solo config by defaultJason Liu2012-02-10-1/+1
| | | | | | remove arm_freq=800 from default env thus keep 1GHz for kernel Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00174155-2 i.mx6sdl: enable i.mx6solo config by defaultrel_imx_3.0.15_12.02.01imx_v2009.08_12.02.01Jason Liu2012-02-09-1/+2
| | | | | | enable i.mx6solo config by default Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00174155: i.mx6sdl: add 32bit DDR support on ARM2 boardJason Liu2012-02-09-0/+5
| | | | | | | | | | | The 32bit DDR script got from the following link: http://compass.freescale.net/livelink/livelink/225194568/ MX6DL_init_DDR3_400MHZ_32bit_1.0.inc.txt?func=doc.Fetch&nodeid=225194568 The DDR hw connection on the ARM2 board is 64bit wire, but we can make it use as 32bit, the side effect is that DDR access size will reduce to the half Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00173966-4: ARM2: add initial support for i.mx6sdlJason Liu2012-02-07-0/+316
| | | | | | | | | | | | | | | | | This patch add the initial support for i.mx6dl ARM2 board -SD/MMC basic -DDR 400Mhz, -FEC,basic Due to i.mx6dl shares the same board with i.mx6q on ARM2, the most common code should be the same as the i.mx6q ARM2 So, no need to create one seperate board file for i.mx6dl. But We can't simply resue anything from the board file since the i.mx6dl iomux is changed and thus we have to deal with the difference between i.mx6q and i.mx6dl for the pad setting part. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00173966-1: i.mx6dl: add the iomux head fileJason Liu2012-02-07-0/+3717
| | | | | | | | | | | Checkpatch will throw some warnings in iomux-mx6dl.h file as: WARNING: line over 80 characters But for the readable, I intend not to fix these warnings, and linux/uboot upstream also has so many such kind of cases Acked-by: Lily Zhang <r58066@freescale.com> Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00173659 MX6Q_UART Change Phyisical to Virtural Port MappingEric Sun2012-02-03-12/+12
| | | | | | | For ARM2 and Sabreauto, change TTY0 to TTY3 (which is physical UART4) For SabreSD, Change TTY3 to TTY0 (which is physical UART1) Signed-off-by: Eric Sun <jian.sun@freescale.com>
* ENGR00172343 Add suport for i.MX 6Q Sabre Smart DeviceNancy Chen2012-01-24-0/+539
| | | | | | | | Add suport for i.MX 6Quad SABRE Smart Device. Signed-off-by: Nancy Chen <Nancy.Chen@freescale.com> Signed-off-by: Tony Lin <tony.lin@freescale.com> Signed-off-by: Frank Li <Frank.Li@freescale.com>
* ENGR00172541 Delete bootcmd_base from the MX6 Sabre-lite configMahesh Mahadevan2012-01-23-4/+2
| | | | | | | Update the config to delete bootcmd_base from the default env settings for Sabre-lite Signed-off-by: Mahesh Mahadevan <r9aadq@freescale.com>
* ENGR00171968 mx6q sabrelite: fixup the sabrelite default bootargs typoXinyu Chen2012-01-13-1/+1
| | | | | | change default console to ttymxc1 Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00171872 Android: update sabrelite default config fix a typo.Zhang Jiejing2012-01-12-1/+1
| | | | | | Fix a typo in default config. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00171633 MX6Q: config: android: update default config.Zhang Jiejing2012-01-12-10/+10
| | | | | | | | | | 1. C macro don't eval, so the rd_loadaddr will be (CONFIG_LOADADDR + 0x300000) rather then number, will cause uboot can't boot, change this to a number which make default boot env correct. 2. update android mx6q saberlite config to align lastest code status. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00171115 add fec support in mx6q sabreauto boardHake Huang2011-12-31-1/+2
| | | | | | | | | | Add fec support for sabreauto board Need hardware rework: 1. Add R450 10.0k 2. Remove R1105 1k 3. short Pin 1,2 of u516, will impact CAN1 Signed-off-by: Hake Huang <b20222@freescale.com>
* ENGR00171008 MX6Q/MFGTOOL : disable the workaround for MFGTOOLHuang Shijie2011-12-28-0/+2
| | | | | | Disable the uboot workaround. It will crash the MFGTOOL. Signed-off-by: Huang Shijie <b32955@freescale.com>
* ENGR00170876 Android: align boot commands with user guide.Zhang Jiejing2011-12-23-3/+3
| | | | | | Align latest boot command with user guide. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
* ENGR00170644: Enlarge mmc read size to 4M in default envTerry Lv2011-12-20-4/+4
| | | | | | | For uImage's size of mx6q is larger than 3M, we enlarge mmc read size to 4M in default env. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00170372 mx6q sabrelite: make TF card as default boot mediaXinyu Chen2011-12-15-2/+2
| | | | | | | As we want TF to be default boot media. Then SD slot can be used by WIFI dongle. Signed-off-by: Xinyu Chen <xinyu.chen@freescale.com>
* ENGR00170299-3 Android: add android board configure file.Zhang Jiejing2011-12-15-0/+315
| | | | | | add android mx6q sabrelite configure file. Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com>
generated by cgit v1.1 at 2024-12-01 22:40:03 +0000