summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* fsl_pci: Move prototypes into fsl_pci.h and remove explicit externsKumar Gala2009-04-04-3/+9
| | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.hKumar Gala2009-04-04-0/+0
| | | | | | | Rename the pci header for FSL HW so we can move some prototypes in there and stop doing explicit externs Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* include/ns16550.h: Unify structure declaration for registersDetlev Zundel2009-04-04-93/+37
| | | | | | | | | | | | | | Instead of special casing the different access patterns, use common code with light macros sprinkled in to accomodate for the different layouts of the register structure. Note that this also changes the types of the registers for the "positively packed (>1)" cases. As the registers truly are unsigned chars, this is surely the Right Thing, but it is a semantic change. Note that for this case depending on the endianness on the bus, we may see a change of behaviour. Signed-off-by: Detlev Zundel <dzu@denx.de>
* Add support for building native win32 toolsPeter Tyser2009-04-04-0/+14
| | | | | | | | | | | | | Add support for compiling the host tools in the tools directory using the MinGW toolchain. This produces executables which can be used on standard Windows computers without requiring cygwin. One must specify the MinGW compiler and strip utilities as if they were the host toolchain in order to build win32 executables, eg: make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* elf.h: Use stdint.h to provide standard typedefs for WIN32Peter Tyser2009-04-04-6/+1
| | | | | | | | The original code provided an incomplete set of typedefs for WIN32 compiles and replicated the standard typedefs that are already provided by stdint.h Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* mflash: Initial mflash supportunsik Kim2009-04-03-0/+65
| | | | | | | | | | | | | | | | | | | | Mflash is fusion memory device mainly targeted consumer eletronic and mobile phone. Internally, it have nand flash and other hardware logics and supports some different operation (ATA, IO, XIP) modes. IO mode is custom mode for the host that doesn't have IDE interface. (Many mobile targeted SoC doesn't have IDE bus) This driver support mflash IO mode. Followings are brief descriptions about IO mode. 1. IO mode based on ATA protocol and uses some custom command. (read confirm, write confirm) 2. IO mode uses SRAM bus interface. Signed-off-by: unsik Kim <donari75@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2009-04-03-2/+865
|\
| * Blackfin: force all boards to HZ of 1000Mike Frysinger2009-04-02-2/+6
| | | | | | | | | | | | | | Since the Blackfin timer code requires HZ to be 1000, barf on any board that tries to use a different value. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf518f-ezbrd: new board portMike Frysinger2009-04-02-0/+147
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf526-ezbrd: new board portMike Frysinger2009-04-02-0/+190
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf538f-ezkit: new board portMike Frysinger2009-04-02-0/+139
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf527-ezkit: new board portMike Frysinger2009-04-02-0/+172
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf548-ezkit: new board portMike Frysinger2009-04-02-0/+211
| | | | | | | | Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-fdtWolfgang Denk2009-04-03-1/+1
|\ \
| * | libfdt: Fix C++ compile-time cast error on gnu 4.2.1Laurent Gregoire2009-04-01-1/+1
| | | | | | | | | | | | | | | | | | | | | Allow the inclusion of libfdt.h in C++ source. Signed-off-by: Laurent Gregoire <laurent.gregoire@tomtom.com> Acked-by: David Gibson <david@gibson.dropbear.id.au>
* | | Rename common ns16550 constants with UART_ prefix to prevent conflictsDetlev Zundel2009-04-03-141/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix problems introduced in commit 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware diagnosis functions for inka4x0] which redefined MSR_RI which is already used on PowerPC systems. Also eliminate redundant definitions in ps2mult.h. More cleanup will be needed for other redundant occurrences though. Signed-off-by: Detlev Zundel <dzu@denx.de>
* | | Add "source" command; prepare removal of "autoscr" commandWolfgang Denk2009-04-03-168/+164
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to the doc/feature-removal-schedule.txt, the "autoscr" command will be replaced by the "source" command in approximately 6 months from now. This patch prepares this change and starts a 6 month transition period as follows: - The new "source" command has been added, which implements exactly the same functionlaity as the old "autoscr" command before - The old "autoscr" command name is kept as an alias for compatibility - Command sequences, script files atc. have been adapted to use the new "source" command - Related environment variables ("autoscript", "autoscript_uname") have *not* been adapted yet; these will be renamed resp. removed in a separate patch when the support for the "autoscr" command get's finally dropped. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-04-02-212/+89
|\ \
| * | OMAP: rename timer divisorLadislav Michl2009-03-30-50/+37
| | | | | | | | | | | | | | | | | | | | | Divisor field is called PTV not PVT. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | s3c2410: move nand driver to drivers/mtd/nandJean-Christophe PLAGNIOL-VILLARD2009-03-30-0/+1
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | s3c24x0: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-03-30-0/+5
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | davinci: move nand driver to drivers/mtd/nandJean-Christophe PLAGNIOL-VILLARD2009-03-30-0/+4
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | imx: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-03-30-1/+4
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | arm720t/clps7111: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-03-29-0/+3
| | | | | | | | | | | | | | | | | | add CONFIG_CLPS7111_SERIAL to activate the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | lpc2292: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-03-29-0/+2
| | | | | | | | | | | | | | | | | | add CONFIG_LPC2292_SERIAL to activate the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | ks8695: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-03-29-0/+2
| | | | | | | | | | | | | | | | | | add CONFIG_KS8695_SERIAL to activate the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | s3c64xx: move usb driver to drivers/usbJean-Christophe PLAGNIOL-VILLARD2009-03-29-0/+1
| | | | | | | | | | | | | | | | | | add CONFIG_USB_S3C64XX to activate the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | netarm: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-03-29-0/+1
| | | | | | | | | | | | | | | | | | add CONFIG_NETARM_SERIAL to activate the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | sa1100: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-03-29-0/+5
| | | | | | | | | | | | | | | | | | add CONFIG_SA1100_SERIAL to activate the driver Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | s3c44b0: move serial driver to drivers/serialJean-Christophe PLAGNIOL-VILLARD2009-03-29-0/+1
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | s3c44b0: move rtc driver to drivers/rtcJean-Christophe PLAGNIOL-VILLARD2009-03-29-0/+1
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | s3c44b0: move i2c driver to drivers/i2cJean-Christophe PLAGNIOL-VILLARD2009-03-29-0/+2
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | s3c4510b: move specific code to soc directoryJean-Christophe PLAGNIOL-VILLARD2009-03-29-3/+1
| | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| * | NetStar: add RTC supportLadislav Michl2009-03-29-0/+9
| | | | | | | | | | | | | | | | | | Add RTC support. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
| * | NetStar: use generic flash driverLadislav Michl2009-03-29-10/+10
| | | | | | | | | | | | Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
| * | Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZLadislav Michl2009-03-29-148/+0
| | | | | | | | | | | | Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
* | | mpc83xx: Set guarded bit on BAT that covers the end of the address spaceScott Wood2009-04-01-6/+10
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mpc8313erdb board currently sets DBAT6 to cover all of the final 256MiB of address space; however, not all of this space is covered by a device. In particular, flash sits at 0xfe000000-0xfe7fffff, and nothing is mapped at the far end of the address space. In zlib, there is a loop that references p[-1] if p is non-NULL. Under some circumstances, this leads to the CPU speculatively loading from 0xfffffff8 if p is NULL. This leads to a machine check. Signed-off-by: Scott Wood <scottwood@freescale.com> continuation to the remaining mpc83xx boards that suffer from the same problem. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2009-04-01-420/+674
|\ \
| * | 86xx: Cleanup MP supportKumar Gala2009-04-01-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx * Introduce determine_mp_bootpg() helper. We'll need this to address a bug introduced in v2009.03 with 86xx MP booting. We have to make sure to reserve the region of memory used for the MP bootpg() so other u-boot code doesn't use it. * Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to allow cmd_mp.c to build and work. In the future we should look at implementing all these functions. This could be common w/85xx if we use spin tables on 86xx. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | MPC85xx: Add MPC8569MDS board supportHaiying Wang2009-03-30-0/+454
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | MPC85xx: Add MPC8569 CPU supportHaiying Wang2009-03-30-4/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage, then invalidate it after LBCR bit 13 is set. Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | fsl-ddr: add the DDR3 SPD infrastructureDave Liu2009-03-30-2/+49
| | | | | | | | | | | | | | | | | | | | | | | | | | | - support mirrored DIMMs, not support register DIMMs - test passed on P2020DS board with MT9JSF12872AY-1G1D1 - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1 Signed-off-by: Dave Liu <daveliu@freescale.com> Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
| * | 83xx: Use common LSDMR defines from asm/fsl_lbc.hKumar Gala2009-03-30-172/+31
| | | | | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Kim Phillips <kim.phillips@freescale.com>
| * | 85xx: Use common LSDMR defines from asm/fsl_lbc.hKumar Gala2009-03-30-242/+61
| | | | | | | | | | | | Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | Add LSDMR (SDRAM Mode Register) definition on localbusKumar Gala2009-03-30-0/+27
| | | | | | | | | | | | | | | | | | | | | The masks for various bit defines of LSDMR are common and thus we can define them in one place rather than replicating them in each config.h Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | rtc: remove broken rtc_read and rtc_write declarationsKim Phillips2009-04-01-4/+0
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit 04e11cf3 "rtc: add support for 4543 RTC (manufactured by e.g. EPSON)" introduces the following build error on boards configuring e.g, the ds1374 rtc: Configuring for MPC837XEMDS board... ds1374.c:103: error: static declaration of 'rtc_read' follows non-static declaration /home/r1aaha/git/u-boot/include/rtc.h:64: error: previous declaration of 'rtc_read' was here ds1374.c:104: error: conflicting types for 'rtc_write' /home/r1aaha/git/u-boot/include/rtc.h:65: error: previous declaration of 'rtc_write' was here this reverts the erroneous chunk. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Acked-by: Detlev Zundel <dzu@denx.de> CC: Detlev Zundel <dzu@denx.de> CC: Andreas Pfefferle <ap@denx.de>
* | inka4x0: Add hardware diagnosis and RTC in configuration.Detlev Zundel2009-03-30-5/+85
| | | | | | | | | | | | | | | | This patch adds the board specific communication routines needed by the external 4543 RTC. Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Andreas Pfefferle <ap@denx.de>
* | inka4x0: Add hardware diagnosis functions for inka4x0Detlev Zundel2009-03-30-0/+12
| | | | | | | | | | | | | | This patch adds advanced diagnosis functions for the inka4x0 board. Signed-off-by: Andreas Pfefferle <ap@denx.de> Signed-off-by: Detlev Zundel <dzu@denx.de>
* | rtc: add support for 4543 RTC (manufactured by e.g. EPSON)Detlev Zundel2009-03-30-0/+4
| | | | | | | | | | Signed-off-by: Detlev Zundel <dzu@denx.de> Signed-off-by: Andreas Pfefferle <ap@denx.de>
* | drivers/twserial: Add protocol driver for "three wire serial" interface.Detlev Zundel2009-03-30-0/+38
|/ | | | | | This pretty unintelligent interface is used on some RTC chips. Signed-off-by: Detlev Zundel <dzu@denx.de>
generated by cgit v1.1 at 2024-11-17 22:28:52 +0000