summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* ENGR00119706: Add esdhcv1 support.Terry Lv2009-12-31-0/+1
| | | | | | Add a new config CONFIG_IMX_ESDHC_V1 for v1 support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119716: MX28 basic support.Terry Lv2009-12-31-0/+627
| | | | | | Add mx28 to u-boot and pass the compiling. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119715: Add multi network support for mx35Terry Lv2009-12-31-1/+3
| | | | | | | | mx35 need to enable both smc911x and FEC. So add CONFIG_ETHPRIME for it. Also, change CONFIG_ETH_PRIME to CONFIG_ETHPRIME. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118739 Correct the board version of MX51 EVKLily Zhang2009-12-27-0/+2
| | | | | | | | | | The SD card in MMC Slot2 can not be detected. This is because the board version of MX51 EVK doesn't keep synchronization with kernel. So the card detect PIN is not configured well. Here Bit 11-Bit 8 in system_rev indicates the board version. The fix is to set Bit 11 -Bit8 as 1 for MX51 EVK board. Signed-off-by: Lily Zhang <r58066@freescale.com>
* ENGR00119660 MX35 UBOOT: Can't boot up on 2k page size nandFred Fan2009-12-25-4/+0
| | | | | | | | 1. Write boot image into nand flash. 2. Switch to external boot mode from nand flash 3. Can not show any message. Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00119526 MX25: Fix mmc read/write failure on mmc ubootrel_imx_2.6.31_09.12.00Sammy He2009-12-21-1/+1
| | | | | | Fix MMC read/write failure due to eSDHC register definition wrong Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00119254: Add mmu header for mx51 build errorTerry Lv2009-12-11-0/+135
| | | | | | Add mmu header for mx51 build error. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119246 Add CONFIG_MXC_NAND config flag in MX25 platformJason2009-12-11-0/+1
| | | | | | Add CONFIG_MXC_NAND config flag in MX25 platform Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00119224: mmu support for mx51 3stack and mx51 bbgTerry Lv2009-12-11-0/+12
| | | | | | mmu support for mx51 3stack and mx51 bbg. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00119171: ubifs support for android recovery mode.Terry Lv2009-12-11-73/+143
| | | | | | ubifs support for android recovery mode. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118789 Uboot:Update NAND scan scheme to support new nand typeJason2009-12-08-10/+25
| | | | | | | | Update NAND scan scheme to support new nand type. With this patch uboot can support new NAND flash on mx25/mx35 board while compatible with old NAND on old boards. Signed-off-by: Jason Liu <r64343@freescale.com>
* ENGR00118978: Timer adjustment for all platformsFred Fan2009-12-04-17/+24
| | | | | | | | | In current u-boot design, get_timer_masked is not correct and udelay is not accurate when the time is less than 1000us. Thus we need to use ipg clock source for accurate timer. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118579 Enable MMUrel_imx_2.6.31_09.12.00_RC1Fred Fan2009-11-30-0/+218
| | | | | | | To enable MMU, it is porting from redboot. Enable MMU and enable I/D cache. Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00118816 Fix reboot/reset failure with image on nandSammy He2009-11-26-4/+17
| | | | | | Reset CPLD registers to fix reboot/reset failure issue. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118576 MX25: Support Smc911x ethernetSammy He2009-11-20-22/+97
| | | | | | | 1. Add imx cspi support for cpld access. 2. Add smc911x ethernet support from cpld. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00118362: Correct recovery NAND cmdTerry Lv2009-11-12-32/+23
| | | | | | | | | This patch will fix three issues: 1. Add boot device detection. 2. Use right nand command in anroid for recovery mode. 3. Recovery mode code clean. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00118294: Misc changes for v2009.08 upgrade.Terry Lv2009-11-11-38/+42
| | | | | | Misc changes for v2009.08 upgrade. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00117616: PATA support in u-boot.Terry Lv2009-11-04-0/+49
| | | | | | PATA support in u-boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116924 Uboot: Boot up hang at detecting NAND when cold bootJason2009-11-04-7/+10
| | | | | | | | | | Boot from MMC card failed at detecting NAND. The fix will 1. Set RBB_MODE to 1 and using atomic status command 2. Set FW correctly by adding CONFIG_NAND_FW_8 config 3. Correct the BLS register value Signed-off-by:Jason Liu <r64343@freescale.com> (cherry picked from commit 7142651386271c340a6ae061a6e2893695675724)
* ENGR00116504-1: Sync clock and l2cc code with redboot.Terry Lv2009-11-04-1/+3
| | | | | | | Syc clock and l2cc code with redboot. Signed-off-by: Terry Lv <r65388@freescale.com> (cherry picked from commit f712613010e3bf2c186f05a1b7381483d733b925)
* u-boot v2009.08 sd/mmc support.Terry Lv2009-11-03-1726/+252
| | | | Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116472-1 U-BOOT upgrade to V2009.08Fred Fan2009-09-14-28/+6
| | | | | | | | | | U-BOOT upgrade from V2009.01 to V2009.08 Initial version for i.MX51 BBG board. Support: FEC, SPI, spi Nor Flash Boot from spi nor flash and mmc/sd Signed-off-by:Fred Fan <r01011@freescale.com>
* ENGR00116243: I2C support for mx51 3ds board.Terry Lv2009-09-10-19/+25
| | | | | | I2C support for mx51 3ds board. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116203: Change nand Makefile to use CONFIG_MXC_NAND.Terry Lv2009-09-10-3/+7
| | | | | | Change nand Makefile to use CONFIG_MXC_NAND. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00116083: Recovery mode support for Android on mx51.Terry Lv2009-09-10-11/+888
| | | | | | Recovery mode support for Android on mx51. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00115046: Add new MMC config option for mx35.Terry Lv2009-09-10-26/+254
| | | | | | Add new MMC config option for mx35. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113941 MX233: Make UBOOT v2009.01 work on EVK boardLionel Xu2009-09-10-0/+628
| | | | | | | | Porting MX233 UBOOT from 1.3.3 to V2009.01. Clear old cfg macro, such as CFG_HZ. Change MAC address getting source from initial configuration to On-Chip OTP. Signed-off-by: Lionel Xu <r63889@freescale.com>
* ENGR00114746: Disable flash header for mx35 nand bootTerry Lv2009-09-10-4/+7
| | | | | | Disable flash header for mx35 nand boot. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114367: Add BABBAGE machine id, BBG2.5 rev id for rootfs init.Terry Lv2009-09-10-0/+1
| | | | | | Update mach-types for BBG board. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114393: Support Atmel AT45DB321D SPI NOR flash.Terry Lv2009-09-10-1/+17
| | | | | | Support Atmel AT45DB321D SPI NOR flash. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00114178 Support MMC/SD boot and enable dhcp in uboot on MX25Sammy2009-09-10-2/+270
| | | | | | | | 1. Support MMC/SD boot in uboot, however, it is disabled default and user needs to enable manually by changing mx25_3stack.h; 2. Enable dhcp for network. Signed-off-by: Sammy He <r62914@freescale.com>
* ENGR00114201: Add MMC configs to mx35 3stack config file.Terry Lv2009-09-10-1/+35
| | | | | | Add MMC configs to mx35 3stack config file. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113611: Add FEC support for BBG2.Terry Lv2009-09-10-6/+30
| | | | | | Add FEC support for BBG2. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113475: Add auto-complete and platform prompt for each platform.Terry Lv2009-09-10-4/+8
| | | | | | Add auto-complete and platform prompt for each platform. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113439: BBG2, enable SPI NOR and MMC in one image.Terry Lv2009-09-10-13/+9
| | | | | | BBG2, enable SPI NOR and MMC in one image. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00113148 Add build option to uboot for different media typeJason2009-09-10-8/+6
| | | | | | | 1. Add build option to uboot for different media type 2. fix the spi-nor link error Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00112845 spi nor boot and pmic support for BBG2.Terry Lv2009-09-10-2/+179
| | | | | | spi nor boot support for BBG2. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00112273 BBG2: MMC boot support.Terry Lv2009-09-10-0/+1380
| | | | | | BBG2: MMC boot support. Signed-off-by: Terry Lv <r65388@freescale.com>
* ENGR00112298 BBG2: Basic boot.r653882009-09-10-0/+221
| | | | | | Basic boot on BBG2 board. Signed-off-by: r65388 <r65388@freescale.com>
* ENGR00110586 MX31: Resolve Copyright issue for mx31 filesr653882009-09-10-0/+1
| | | | | | Add freescale copyright. Signed-off-by: r65388 <r65388@freescale.com>
* ENGR00109851 Add nand driver for MX51 ubootJason2009-09-10-132/+291
| | | | | | Add nand driver for MX51 uboot Signed-off-by:Jason Liu <r64343@freescale.com>
* ENGR00107840 Add U-Boot for MX25 PDK boardAlan Carvalho de Assis2009-09-10-0/+200
| | | | | | | These patches add functional support to iMX25PDK. Currently only the internal FEC is supported. Signed-off-by: Alan Carvalho de Assis <alan.assis@freescale.com>
* ENGR00108673 Add i.MX25 core to U-BootAlan Carvalho de Assis2009-09-10-60/+1138
| | | | | | This patch add support on U-Boot to i.MX25 processor. Signed-off-by: Alan Carvalho de Assis <alan.assis@freescale.com>
* ENGR00108473 Porting i.MX51 3stack TO2 support to V2009.01Fred Fan2009-09-10-0/+1422
| | | | | | | Support i.MX51 TO2.0 3stack board. And enable LAN9217 support. NAND is not supported in this patch. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00107886 Porting MX31, MX35 3stack to u-boot V2009.01Fred Fan2009-09-10-31/+29
| | | | | | Modify and Verfiy MX31 & MX35 3stack according to the changes in V2009.01 Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00104583 MX35 can not boot up kernelFred Fan2009-09-10-1/+11
| | | | | | | | uboot can not boot kernel. There are no more messages excepts uncompression message. The root cause is wrong romfile version offset. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00103914 Support i.MX35 TO2 and 3stack board version 2Fred Fan2009-09-09-0/+4
| | | | | | | | | 1. Check Soc version 2. Check Board version based on TO2 pmic chip version. 3. Based on soc version, skips To1 workaround code 4. based on board version, enables FEC power and select pin mux. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00102788 Remove CONFIG_NAND_BOOT on i.MX31 3stackFred Fan2009-09-09-1/+0
| | | | | | | | | 1. Change NAND driver Makefile to bulild individual nand driver on i.MX31 and i.MX35. 2. Remove CONFIG_NAND_BOOT to common boot code which supports boot from nand and nor. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00102776 Support boot from NAND on i.mx35 3stack TO1Fred Fan2009-09-09-0/+39
| | | | | | | | | 1. Support boot from NAND Changes link script to separate initial code to multiple sections. 2. One binary support boot from NOR and NAND Changes common file start.S to support multiple sections. Signed-off-by: Fred Fan <r01011@freescale.com>
* ENGR00099697 Add nand driver for mx35Fred Fan2009-09-09-1/+216
| | | | | | Add nand driver for mx35 Signed-off-by:Jason Liu <r64343@freescale.com>
generated by cgit v1.1 at 2024-11-29 05:26:01 +0000