summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* TQM85xx: Various coding style fixesWolfgang Grandegger2008-06-10-46/+42
| | | | Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
* NAND FSL UPM: driver re-write using the hwcontrol callbackWolfgang Grandegger2008-06-10-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a re-write of the NAND FSL UPM driver using the more universal hwcontrol callback (instead of the cmdfunc callback). Here is a brief list of furher modifications: - For the time being, the UPM setup writing the UPM array has been removed from the driver and must now be done by the board specific code. - The bus width definition in "struct fsl_upm_nand" is now in bits to comply with the corresponding Linux driver and 8, 16 and 32 bit accesses are supported. - chip->dev_read is only set if fun->dev_ready != NULL, which is required for boards not connecting the R/B pin. - A few issue have been fixed with MxMR bit manipulation like in the corresponding Linux driver. Note: I think the "io_addr" field of "struct fsl_upm" could be removed as well, because the address is already determined by "nand->IO_ADDR_[RW]", but I'm not 100% sure. This patch has been tested on a TQM8548 modules with the NAND chip Micron MT29F8G08FABWP. This patch is based on the following patches posted to this list a few minutes ago: PPC: add accessor macros to clear and set bits in one shot 83xx/85xx/86xx: add more MxMR local bus definitions Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* PPC: add accessor macros to clear and set bits in one shotWolfgang Grandegger2008-06-10-0/+36
| | | | | | | | | | | | | PPC: add accessor macros to clear and set bits in one shot This patch adds macros from linux/include/asm-powerpc/io.h to clear and set bits in one shot using the in_be32, out_be32, etc. accessor functions. They are very handy to manipulate bits it I/O registers. This patch is required for my forthcoming FSL NAND UPM driver re-write and the support for the TQM8548 module. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
* 83xx/85xx/86xx: add more MxMR local bus definitionsWolfgang Grandegger2008-06-10-5/+38
| | | | | | | | | | | | | | | | | | | | 83xx/85xx/86xx: add more MxMR local bus definitions This patch adds more macro definitions for the UPM Machine Mode Registers They are copied from "include/mpc82xx.h" to simplify the merge of all 8xxx common local bus definitions into include/asm-ppc/fsl_lbc.h. They are required for my forthcoming FSL NAND UPM driver re-write and the support for the TQM8548 module. This patch is based on the following two patches from Anton Vorontsov: http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06511.html http://www.mail-archive.com/u-boot-users@lists.sourceforge.net/msg06587.html I leave coding style violation fixes, code beautification and name corrections to somebody else ;-(. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
* 83xx/85xx: further localbus cleanupsAnton Vorontsov2008-06-10-45/+23
| | | | | | | Merge mpc85xx.h's LBC defines to fsl_lbc.h. Also, adopt ACS names from mpc85xx.h, so ACS_0b10 renamed to ACS_DIV4, ACS_0b11 to ACS_DIV2. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* 83xx/85xx/86xx: factor out Freescale Localbus defines out of mpc83xx.hAnton Vorontsov2008-06-10-233/+256
| | | | | | | This patch moves Freescale Localbus defines out of mpc83xx.h, so we could use it on MPC85xx and MPC86xx processors. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
* 85xx: expose cpu identificationKumar Gala2008-06-10-0/+11
| | | | | | | | | | | | | The current cpu identification code is used just to return the name of the processor at boot. There are some other locations that the name is useful (device tree setup). Expose the functionality to other bits of code. Also, drop the 'E' suffix and add it on by looking at the SVR version when we print this out. This is mainly to allow the most flexible use of the name. The device tree code tends to not care about the 'E' suffix. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Socrates: Fix PCI bus frequency reportWolfgang Denk2008-06-03-1/+2
| | | | Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
* Add size #defines for Altera Cyclone-II EP2C8 and EP2C20.Andre Schwarz2008-06-03-0/+2
| | | | Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
* SPI Flash subsystemHaavard Skinnemoen2008-06-03-0/+70
| | | | | | | | | | This adds a new SPI flash subsystem. Currently, only AT45 DataFlash in non-power-of-two mode is supported, but some preliminary support for other flash types is in place as well. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* atmel_spi: Driver for the Atmel SPI controllerHans-Christian Egtvedt2008-06-03-0/+11
| | | | | | | | | | | | | | | This adds a driver for the SPI controller found on most AT91 and AVR32 chips, implementing the new SPI API. Changed in v4: - Update to new API - Handle zero-length transfers appropriately. The user may send a zero-length SPI transfer with SPI_XFER_END set in order to deactivate the chip select after a series of transfers with chip select active. This is useful e.g. when polling the status register of DataFlash. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
* SPI API improvementsHaavard Skinnemoen2008-06-03-25/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch gets rid of the spi_chipsel table and adds a handful of new functions that makes the SPI layer cleaner and more flexible. Instead of the spi_chipsel table, each board that wants to use SPI gets to implement three hooks: * spi_cs_activate(): Activates the chipselect for a given slave * spi_cs_deactivate(): Deactivates the chipselect for a given slave * spi_cs_is_valid(): Determines if the given bus/chipselect combination can be activated. Not all drivers may need those extra functions however. If that's the case, the board code may just leave them out (assuming they know what the driver needs) or rely on the linker to strip them out (assuming --gc-sections is being used.) To set up communication parameters for a given slave, the driver needs to call spi_setup_slave(). This returns a pointer to an opaque spi_slave struct which must be passed as a parameter to subsequent SPI calls. This struct can be freed by calling spi_free_slave(), but most driver probably don't want to do this. Before starting one or more SPI transfers, the driver must call spi_claim_bus() to gain exclusive access to the SPI bus and initialize the hardware. When all transfers are done, the driver must call spi_release_bus() to make the bus available to others, and possibly shut down the SPI controller hardware. spi_xfer() behaves mostly the same as before, but it now takes a spi_slave parameter instead of a spi_chipsel function pointer. It also got a new parameter, flags, which is used to specify chip select behaviour. This may be extended with other flags in the future. This patch has been build-tested on all powerpc and arm boards involved. I have not tested NIOS since I don't have a toolchain for it installed, so I expect some breakage there even though I've tried fixing up everything I could find by visual inspection. I have run-time tested this on AVR32 ATNGW100 using the atmel_spi and DataFlash drivers posted as a follow-up. I'd like some help testing other boards that use the existing SPI API. But most of all, I'd like some comments on the new API. Is this stuff usable for everyone? If not, why? Changed in v4: - Build fixes for various boards, drivers and commands - Provide common struct spi_slave definition that can be extended by drivers - Pass a struct spi_slave * to spi_cs_activate and spi_cs_deactivate - Make default bus and mode build-time configurable - Override default SPI bus ID and mode on mx32ads and imx31_litekit. Changed in v3: - Add opaque struct spi_slave for controller-specific data associated with a slave. - Add spi_claim_bus() and spi_release_bus() - Add spi_free_slave() - spi_setup() is now called spi_setup_slave() and returns a struct spi_slave - soft_spi now supports four SPI modes (CPOL|CPHA) - Add bus parameter to spi_setup_slave() - Convert the new i.MX32 SPI driver - Convert the new MC13783 RTC driver Changed in v2: - Convert the mpc8xxx_spi driver and the mpc8349emds board to the new API. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Tested-by: Guennadi Liakhovetski <lg@denx.de>
* Move definition of container_of() to common.hHaavard Skinnemoen2008-06-03-22/+11
| | | | | | | | | | | AVR32 and AT91SAM9 both have their own identical definitions of container_of() taken from the Linux kernel. Move it to common.h so that all architectures can use it. container_of() is already used by some drivers, and will be used extensively by the new and improved SPI API. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* Fix warnings from gcc-4.3.0 build on a ppc hostKumar Gala2008-06-03-1/+1
| | | | | | | | | | | * The cfi_flash.c memset fix actual allows the board to boot so there is a bit more going on here than just resolving warnings associated with uninitialized variables. * include/asm/bitops.h:302: warning: '__swab32p' is static but used in inline function 'ext2_find_next_zero_bit' which is not static Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* Avoid initrd and logbuffer area overlapsMarian Balakowicz2008-06-03-0/+1
| | | | | | | | | Add logbuffer to reserved LMB areas to prevent initrd allocation from overlaping with it. Make sure to use correct logbuffer base address. Signed-off-by: Marian Balakowicz <m8@semihalf.com>
* PPC: Add print_bats() to lib_ppc/bat_rw.cBecky Bruce2008-06-03-0/+1
| | | | | | | | | This function prints the values of all the BAT register pairs - I needed this for debug earlier this week; adding it to lib_ppc so others can use it (and add it to reginfo commands if so desired). Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* PPC: Change lib_ppc/bat_rw.c to use high batsBecky Bruce2008-06-03-1/+5
| | | | | | | | Currently, this code only deals with BATs 0-3, which makes it useless on systems that support BATs 4-7. Add the support for these registers. Signed-off-by: Becky Bruce <Becky.bruce@freescale.com>
* PPC: Create and use CONFIG_HIGH_BATSBecky Bruce2008-06-03-1/+78
| | | | | | | | | | | Change all code that conditionally operates on high bat registers (that is, BATs 4-7) to look at CONFIG_HIGH_BATS instead of the myriad ways this is done now. Define the option for every config for which high bats are supported (and enabled by early boot, on parts where they're not always enabled) Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
* Merge remote branch 'u-boot-at91/for-1.3.4'Wolfgang Denk2008-06-03-17/+1505
|\
| * Merging Stelian Pop AT91 patchesJean-Christophe PLAGNIOL-VILLARD2008-05-24-17/+1505
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge branch 'testing-V2' Conflicts: board/atmel/at91cap9adk/Makefile Fixing copyright board/atmel/at91sam9260ek/Makefile Fixing copyright board/atmel/at91sam9260ek/u-boot.lds Delete no more needed ld script Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91: Cleanup unused config header file definitions.Stelian Pop2008-05-10-10/+0
| | | | | | | | | | | | | | | | | | | | | | | | CONFIG_ENV_OVERWRITE is commented out in the config header files, so let's cleanup the files by removing the whole definition. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * Support AT91CAP9 revC CPUsStelian Pop2008-05-10-1/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AT91CAP9 revC CPU has a few differences over the previous, revB CPU which was distributed in small quantities only (revA was an internal Atmel product only). The revC silicon needs a special initialisation sequence to switch from the internal (imprecise) RC oscillator to the external 32k clock. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9RLEK: hook up the ATMEL LCD driverStelian Pop2008-05-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the necessary adaptations (PIO configurations and defines in config header file) to hook up the Atmel LCD driver to the AT91SAM9RLEK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9263EK: hook up the ATMEL LCD driverStelian Pop2008-05-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the necessary adaptations (PIO configurations and defines in config header file) to hook up the Atmel LCD driver to the AT91SAM9263EK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9261EK: hook up the ATMEL LCD driverStelian Pop2008-05-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the necessary adaptations (PIO configurations and defines in config header file) to hook up the Atmel LCD driver to the AT91SAM9261EK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91CAP9ADK: hook up the ATMEL LCD driverStelian Pop2008-05-10-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes the necessary adaptations (PIO configurations and defines in config header file) to hook up the Atmel LCD driver to the AT91CAP9ADK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * Add ATMEL LCD driverStelian Pop2008-05-10-1/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the ATMEL LCDC driver which is used on some AT91 and AVR platforms. Is has been tested with the AT91CAP9ADK, AT91SAM9261EK, AT91SAM9263EK and AT91SAM9RLEK boards. Adaptation for AVR32 should probably be easy. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9RLEK supportStelian Pop2008-05-10-0/+377
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the AT91SAM9RL chip and the AT91SAM9RLEK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9263EK supportStelian Pop2008-05-10-0/+455
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the AT91SAM9263 chip and the AT91SAM9263EK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9261EK supportStelian Pop2008-05-10-0/+363
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the AT91SAM9261 chip and the AT91SAM9261EK board. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9260EK: Fix dataflash offsets in CONFIG_BOOTCOMMANDStelian Pop2008-05-10-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND in order to cope with the changes in DataFlash partitionning scheme (cset c3a60cb3). Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9260EK: Normalize BOOTARGSStelian Pop2008-05-10-2/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from DataFlash or from NAND), and gives to Linux a fully specified mtdparts variable. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9260EK: Normalize SPI timingsStelian Pop2008-05-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch changes the SPI timings to closely match the ones used by the Linux kernel and the Atmel's own bootstrap project. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91SAM9260EK: Handle 8 or 16 bit NANDStelian Pop2008-05-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Atmel boards can handle 8 or 16 bit NAND memories. This patch makes the support configurable in the board config header file (CFG_NAND_DBW_8 or CFG_NAND_DBW_16). Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91CAP9ADK: Fix dataflash offsets in CONFIG_BOOTCOMMANDStelian Pop2008-05-10-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the dataflash offsets used in CONFIG_BOOTCOMMAND in order to cope with the changes in DataFlash partitionning scheme (cset c3a60cb3). Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91CAP9ADK: Normalize BOOTARGSStelian Pop2008-05-10-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adapts CONFIG_BOOTARGS to the chosen boot method (boot from DataFlash or from NAND), and gives to Linux a fully specified mtdparts variable. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91CAP9ADK: Normalize SPI timingsStelian Pop2008-05-10-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | This patch changes the SPI timings to closely match the ones used by the Linux kernel and the Atmel's own bootstrap project. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * AT91CAP9ADK: Handle 8 or 16 bit NANDStelian Pop2008-05-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Atmel boards can handle 8 or 16 bit NAND memories. This patch makes the support configurable in the board config header file (CFG_NAND_DBW_8 or CFG_NAND_DBW_16). Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * Update origin and copyright information in arch-at91sam9 header filesStelian Pop2008-05-10-152/+96
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When doing the AT91CAP9/AT91SAM9 port, a number of header files were copied from the Linux kernel sources. This patch explicitly specifies this origin for all the copied headers, and for those missing copyright information, adds it. Additionaly, the header file 'at91sam926x_mc.h' has been superceeded in the latest kernel sources by 'at91sam9_smc.h'. The copyright information has been confirmed by the AT91 Linux kernel maintainer, Andrew Victor <avictor.za@gmail.com>. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| | * Fix @ -> <at> substitutionStelian Pop2008-05-08-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When applying the AT91CAP9 patches upstream, something transformed the '@' character into the ' <at> ' sequence. The patch below restores the original form in all the places where it has been modified (the AT91CAP9 files, the AT91SAM9260 files which were copied from AT91CAP9, and a couple of other files where the ' <at> ' sequence was present). Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | Merge remote branch 'u-boot-avr32/master'Wolfgang Denk2008-06-03-284/+477
|\ \ \
| * | | avr32: Rework SDRAM initialization codeHaavard Skinnemoen2008-05-27-44/+77
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This cleans up the SDRAM initialization and related code a bit, and allows faster booting. * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h * Remove memory test from sdram_init() and make caller responsible for verifying the SDRAM and determining its size. * Remove base_address member from struct sdram_config (was sdram_info) * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT * Add support for a common STK1000 hack: 16MB SDRAM instead of 8. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | | avr32: Rename pm_init() as clk_init() and make SoC-specificHaavard Skinnemoen2008-05-27-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pm_init() was always more about clock initialization than anything else. Dealing with PLLs, clock gating and such is also inherently SoC-specific, so move it into a SoC-specific directory. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | | avr32: Clean up the HMATRIX codeHaavard Skinnemoen2008-05-27-232/+192
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rework the HMATRIX configuration interface so that it becomes easier to configure the HMATRIX for boards with special needs, and add new parts. The HMATRIX header file has been split into a general, chip-independent part with register definitions, etc. and a chip-specific part with SFR bitfield definitions and master/slave identifiers. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | | avr32: Add support for the ATSTK1006 boardHaavard Skinnemoen2008-05-27-0/+202
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a replacement for ATSTK1002 with 64MB SDRAM and NAND flash on board. It's currently in production and will be available soon. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | | avr32: Get rid of the .flashprog sectionHaavard Skinnemoen2008-05-27-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The .flashprog section was only needed back when we were running directly from flash, and it's even more useless on NGW100 since it uses the CFI flash driver which never used this workaround in the first place. Remove it on STK1000 as well, and get rid of all the associated code and annotations. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | | avr32: Use correct condition around macb clock accessorsHaavard Skinnemoen2008-05-27-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | get_macb_pclk_rate() and get_macb_hclk_rate() should be available when the chip has a MACB controller, not when it has a USART. Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
| * | | avr32: stk1002 and ngw100 convergenceDavid Brownell2008-05-27-6/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make STK1002 and NGW100 boards act more alike: - STK boards can use as many arguments as NGW - STK boards don't need to manage FPGAs either - NGW commands should match STK ones Also spell U-Boot right in prompts for STK1002 and NGW100. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> [haavard.skinnemoen@atmel.com: update STK100[34] as well] Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
* | | | Merge remote branch 'u-boot-nand-flash/master'Wolfgang Denk2008-06-03-0/+9
|\ \ \ \
| * | | | Make onenand_uboot.h self-sufficient.Scott Wood2008-05-28-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Don't assume types are provided by previously included headers. Signed-off-by: Scott Wood <scottwood@freescale.com>
generated by cgit v1.1 at 2024-11-20 13:19:10 +0000