summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* Merge branch 'master' of git://www.denx.de/git/u-boot-netWolfgang Denk2007-11-16-50/+64
|\
| * NET: Add Ethernet 1000BASE-X support for PPC4xxLarry Johnson2007-11-06-0/+22
| | | | | | | | | | | | | | | | | | | | This patch adds support for 1000BASE-X to functions "miiphy_speed ()" and "miiphy_duplex()". It also adds function "miiphy_is_1000base_x ()", which returns non-zero iff the PHY registers are configured for 1000BASE-X. The "mii info" command is modified to distinguish between 1000BASE-T and -X. Signed-off-by: Larry Johnson <lrj@acm.org> Signed-off-by: Ben Warren <bwarren@qstreams.com>
| * NET: Cosmetic changesLarry Johnson2007-11-06-50/+42
| | | | | | | | | | Signed-off-by: Larry Johnson <lrj@acm.org> Signed-off-by: Ben Warren <bwarren@qstreams.com>
* | [UC101] SRAM now with 2 MB working.Heiko Schocher2007-11-13-1/+1
|/ | | | Signed-off-by: Heiko Schocher <hs@denx.de>
* Cleanup coding style; update CHANGELOGWolfgang Denk2007-11-03-1/+1
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* Fix USB support issue for MPC8641HPCN board.Zhang Wei2007-11-03-0/+2
| | | | | | | | | | | The configuration file has already enabled USB, but it missed definition of CFG_OHCI_SWAP_REG_ACCESS, the USB on MPC8641HPCN can not work because of the wrong USB register endian. And add the USB command to U-Boot commands list. Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
* Use config_cmd_default.h instead of config_cmd_all.hJean-Christophe PLAGNIOL-VILLARD2007-11-03-229/+160
| | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* changes for IDS8247 board supportSergej Stepanov2007-11-03-10/+28
| | | | | | | | | | | | To get the IDS8247 board working following are done: - FCC2 is deactivated - FCC1 is activated - I2C is activated - CFI driver is activated - Adapted for use with LIBFDT Signed-off-by: Sergej Stepanov <Sergej.Stepanov@ids.de> --
* Merge branch 'master' of /home/wd/git/u-boot/workWolfgang Denk2007-11-02-29/+31
|\
| * Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2007-11-02-27/+26
| |\
| | * ATSTK1002: Remove default ethernet addressesHaavard Skinnemoen2007-11-01-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Wolfgang is right: It's not a good idea to set up default initial ethernet addresses for a board, even though they belong to the local range. This will change the failure mode from "IT manager screams at you for using duplicate ethernet addresses" to a nice error message explaining that the ethernet address hasn't been set properly. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| | * Merge branch 'master' of git://www.denx.de/git/u-boot-coldfireWolfgang Denk2007-11-01-19/+23
| | |\
| | | * ColdFire 54455: Fix correct boot location for atmel and intelTsiChungLiew2007-10-25-16/+20
| | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | | * ColdFire 5329: Assign correct SDRAM size and fix cacheTsiChungLiew2007-10-25-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | | * ColdFire 5253: Assign correct SDRAM sizeTsiChungLiew2007-10-25-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | | * ColdFire 5282: Fix external flash boot and return dramsizeTsiChungLiew2007-10-25-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
| | * | Merge branch 'master' of git://www.denx.de/git/u-boot-tq-groupWolfgang Denk2007-11-01-1/+1
| | |\ \
| | | * | TQM5200: fix spurious characters on second serial interfaceMartin Krause2007-10-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch PSC3 is configured as UART. This is done, because if the pins of PSC3 are not configured at all (-> all pins are GPI), due to crosstalk, spurious characters may be send over the RX232_2_TXD signal line. Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
| | | * | Merge branch 'u-boot' of /home/mkr/git/u-boot-tq-group into bugfixMartin Krause2007-10-23-0/+4
| | | |\ \ | | | | |/
| * | | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2007-11-01-2/+5
| |\ \ \ \ | | |/ / /
| | * | | Merge branch 'master' of git://www.denx.de/git/u-boot-mipsWolfgang Denk2007-11-01-1/+1
| | |\ \ \
| | | * | | [MIPS] Fix UNCACHED_SDRAMVlad Lungu2007-10-21-1/+1
| | | | |/ | | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | PHYSADDR is for physical address, KSEG1ADDR is for uncached. Signed-off-by: Vlad Lungu <vlad@comsys.ro> Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
| | * | | Merge branch 'master' of git://www.denx.de/git/u-boot-mpc85xxWolfgang Denk2007-11-01-1/+4
| | |\ \ \
| | | * | | Improve handling of PCI interrupt device tree fixup on MPC85xx CDSKumar Gala2007-10-19-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the MPC85xx CDS we have two issues: 1. The device tree fixup code did not check to see if the property we are trying to update is actually found. Its possible that it would update random memory starting at 0. 2. Newer Linux kernel's have moved the location of the PCI nodes to be sibilings of the soc node and not children. The explicit PATH to the PCI node would not be found for these device trees. Add the ability to handle both paths. In the future we shouldn't handle such fixups by explicit path. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| | | * | | Set OF_STDOUT_PATH to match the default console on MPC8568 MDSKumar Gala2007-10-19-1/+1
| | | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On the MPC8568 MDS we use ttyS0, UART0, etc. as the standard configured console. Make it so we match that config what we tell Linux as the early STDOUT console. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | | | | TQM5200: increase kernel_addr_r and fdt_addr_r (hinted by Wolfgang Denk).Bartlomiej Sieka2007-10-25-2/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
* | | | | Merge branch 'motionpro_ng' of /home/tur/git/u-bootWolfgang Denk2007-10-24-14/+15
|\ \ \ \ \ | |/ / / / |/| | | |
| * | | | Motion-PRO: Update configuration to accomodate next generation board.Bartlomiej Sieka2007-10-23-14/+15
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | New board has faster oscillator and a different Flash chip. This affects: - CFG_MPC5XXX_CLKIN - SDRAM timings - Flash CS configuration (timings) - Flash sector size, and thus MTD partition layout - malloc() arena size (due to bigger Flash sectors) - smaller memory test range (due to bigger malloc() arena) This patch also enables more extensive memory testing via "mtest". Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
* | | | TQM5200: fix spurious characters on second serial interfaceMartin Krause2007-10-24-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With this patch PSC3 is configured as UART. This is done, because if the pins of PSC3 are not configured at all (-> all pins are GPI), due to crosstalk, spurious characters may be send over the RX232_2_TXD signal line. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* | | | Mips: Fix string functions differ prototype declarationJean-Christophe PLAGNIOL-VILLARD2007-10-24-5/+5
| | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | | delta: Fix OHCI_REGS_BASE undeclared and wait_ms implicit declarationJean-Christophe PLAGNIOL-VILLARD2007-10-24-0/+2
| | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | | xsengine: Fix no partition type specified, use DOS as defaultJean-Christophe PLAGNIOL-VILLARD2007-10-24-0/+1
| | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | | lubbock: Fix no partition type specified, use DOS as defaultJean-Christophe PLAGNIOL-VILLARD2007-10-24-0/+1
| | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
* | | | fix pxa255_idp boardMarcel Ziswiler2007-10-23-9/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The pxa255_idp being an old unmaintained board showed several issues: 1. CONFIG_INIT_CRITICAL was still defined. 2. Neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION was defined. 3. Symbol flash_addr was undeclared. 4. The boards lowlevel_init function was still called memsetup. 5. The TEXT_BASE was still 0xa3000000 rather than 0xa3080000. 6. Using -march=armv5 instead of -march=armv5te resulted in lots of 'target CPU does not support interworking' warnings on recent compilers. 7. The PXA's serial driver redefined FFUART, BTUART and STUART used as indexes rather than the register definitions from the pxa-regs header file. Renamed them to FFUART_INDEX, BTUART_INDEX and STUART_INDEX to avoid any ambiguities. 8. There were several redefinition warnings concerning ICMR, OSMR3, OSCR, OWER, OIER, RCSR and CCCR in the PXA's assembly start file. 9. The board configuration file was rather outdated. 10. The part header file defined the vendor, product and revision arrays as unsigned chars instead of just chars in the block_dev_desc_t structure. Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* | | | Make MPC8266ADS command selection more robustRune Torgersen2007-10-23-33/+20
| |/ / |/| | | | | | | | | | | | | | Fix MPC8266 command line definition so it won't break when new commands are added to u-boot. Signed-off-by Rune Torgersen <runet@innovsys.com>
* | | Merge branch 'master' of git://www.denx.de/git/u-boot-tq-groupWolfgang Denk2007-10-21-24/+38
|\ \ \ | | |/ | |/|
| * | TQM860M: adjust for doubled flash sector size.Martin Krause2007-10-15-4/+9
| | | | | | | | | | | | | | | | | | | | | Adjust flash map to support the new S29GLxxN (N-Type) Flashes with doubled sector size. Signed-off-by: Martin Krause <martin.krause@tqs.de>
| * | TQM866M: fix SDRAM refreshMartin Krause2007-10-15-16/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At 133 MHz the current SDRAM refresh rate is too fast (measured 4 * 1.17 us). CFG_MAMR_PTA changes from 39 to 97. This result in a refresh rate of 4 * 7.8 us at the default clock 50 MHz. At 133 MHz the value will be then 4 * 2.9 us. This is a compromise until a new method is found to adjust the refresh rate. Signed-off-by: Martin Krause <martin.krause@tqs.de>
| * | TQM866M: adjust for doubled flash sector size.Martin Krause2007-10-15-4/+9
| | | | | | | | | | | | | | | | | | | | | Adjust flash map to support the new S29GLxxN (N-Type) Flashes with doubled sector size. Signed-off-by: Martin Krause <martin.krause@tqs.de>
* | | Merge branch 'master' of /home/git/u-boot/Wolfgang Denk2007-10-21-0/+4
|\ \ \ | | |/ | |/|
| * | ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia & YosemiteStefan Roese2007-10-15-0/+4
| |/ | | | | | | | | | | | | | | | | | | | | The BCSR status bit for the 66MHz PCI operation was correctly addressed (MSB/LSB problem). Now the correct currently setup PCI frequency is displayed upon bootup. This patch also fixes this problem on Rainier & Yellowstone, since these boards use the same souce code as Sequoia & Yosemite do. Signed-off-by: Stefan Roese <sr@denx.de>
* | Make MPC8266ADS board compile again.runet@innovsys.com2007-10-16-0/+2
|/ | | | Signed-off-by: Runet Torgersen <runet@innovsys.com>
* [FIX] XUPV2P change command handlingMichal Simek2007-10-14-19/+17
| | | | and remove code violation
* Merge branch 'master' of git://www.denx.de/git/u-boot-avr32Wolfgang Denk2007-10-13-13/+27
|\
| * Fix memtest breakageHaavard Skinnemoen2007-10-02-6/+2
| | | | | | | | | | | | | | | | CFG_MEMTEST_START uses weird magic involving gd, which fails to compile. Use hardcoded values instead (we actually know how much RAM we have on board.) Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * Merge commit 'origin/master'Haavard Skinnemoen2007-10-02-2203/+14644
| |\
| * | Update atstk1002 bootargs.Eirik Aanonsen2007-09-18-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Updates to atstk1002 U-Boot header file: - Changed bootargs: * Set the bootargs for at1002 to point to the SD-card partition instead * ... of the boot flash. * Removing the rootfstype since that argument are not needed. Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | Add some comments to clocks in atstk1002.hEirik Aanonsen2007-09-18-2/+20
| | | | | | | | | | | | | | | | | | | | | | | | This patch applies some clarifying comments to how the different clocks are setup according to atstk1002.h Some of the previous comments where stating wrongful information. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | Reduce BOOTDELAY variable to 1 second by default for STK1002Hans-Christian Egtvedt2007-08-30-1/+1
| | | | | | | | | | | | | | | Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
| * | Remove double quotation marks around MAC address for STK1002Hans-Christian Egtvedt2007-08-30-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
generated by cgit v1.1 at 2024-11-25 21:12:34 +0000