summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* Merge branch 'master' of git://git.denx.de/u-boot-blackfinTom Rini2014-08-12-6/+8
|\
| * support blackfin board initialization in generic board_fSonic Zhang2014-08-07-1/+2
| | | | | | | | | | | | | | | | | | - init hardware watchdog if applicable - use CONFIG_SYS_MONITOR_LEN as the gd monitor len for Blackfin - reserve u-boot memory at the top field of the RAM for Blackfin - avoid refer to CONFIG_SYS_MONITOR_LEN, which is not defined by Blackfin Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
| * blackfin: convert blackfin board_f and board_r to use generic board init ↵Sonic Zhang2014-08-07-5/+6
| | | | | | | | | | | | | | | | | | | | | | functions - move blackfin specific cpu init code from blackfin board.c to cpu.c - remove blackfin specific board init code and invoke generic board_f fron cpu init entry - rename section name bss_vma to bss_start in order to match the generic board init code - add a fake relocate_code function to set up the new stack only Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
* | lcd: cleanup unused functionsHannes Petermaier2014-08-10-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes following two functions: - lcd_getbgcolor(...) not used somewhere outside lcd.c, internally we use now the global variable lcd_color_bg (was return value of function before) - lcd_getfgcolor(...) not used in any place of u-boot Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at> [agust: rebased] Signed-off-by: Anatolij Gustschin <agust@denx.de>
* | Add support for 32-bit organized framebuffersHannes Petermaier2014-08-10-1/+16
| | | | | | | | | | | | | | - Adds support for 32-bit organized framebuffers to the LCD-framework. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at> Cc: agust@denx.de
* | image: introduce genimg_get_kernel_addr()Bryan Wu2014-08-09-0/+1
| | | | | | | | | | | | | | | | | | | | Kernel address is normally stored as a string argument of bootm or bootz. This function is taken out from boot_get_kernel() of bootm.c, which can be reused by others. Signed-off-by: Bryan Wu <pengw@nvidia.com> [trini: Fix warnings with CONFIG_FIT] Signed-off-by: Tom Rini <trini@ti.com>
* | ARM: rpi_b: use new generic $bootcmdStephen Warren2014-08-09-93/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the custom $bootcmd with that from <config_distro_bootcmd.h>. There should be no functional change, since the new generic $bootcmd was derived strongly from tegra-common-post.h, after which this part of rpi_b.h was modelled. The #defines to enable/disable U-Boot commands/features were moved earlier in rpi_b.h, so they are set up before config_distro_bootcmd.h is included, since it tests whether certain features should be included based on those defines. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | ARM: tegra: use new generic $bootcmdStephen Warren2014-08-09-130/+10
| | | | | | | | | | | | | | | | | | Replace the custom $bootcmd with that from <config_distro_bootcmd.h>. There should be no functional change, since the new generic $bootcmd was derived strongly from tegra-common-post.h. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org>
* | config: introduce a generic $bootcmdDennis Gilmore2014-08-09-0/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This generic $bootcmd, and associated support macros, automatically searches a defined set of storage devices (or network protocols) for an extlinux configuration file or U-Boot boot script in various standardized locations. Distros that install such a boot config file/script in those standard locations will get easy-to-set-up booting on HW that enables this generic $bootcmd. Boards can define the set of devices from which boot is attempted, and the order in which they are attempted. Users may later customize this set/order by edting $boot_targets. Users may interrupt the boot process and boot from a specific device simply by executing e.g.: $ run bootcmd_mmc1 or: $ run bootcmd_pxe This patch was originally written by Dennis Gilmore based on Tegra and rpi_b boot scripts. I have made the following modifications since then: * Boards must define the BOOT_TARGET_DEVICES macro in order to specify the set of devices (and order) from which to attempt boot. If needed, we can define a default directly in config_distro_bootcmd.h. * Removed $env_import and related variables; nothing used them, and I think it's better for boards to pre-load an environment customization file using CONFIG_PREBOOT if they need. * Renamed a bunch of variables to suit my whims:-) Signed-off-by: Dennis Gilmore <dennis@ausil.us> Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Marek Vasut <marex@denx.de> Acked-by: Simon Glass <sjg@chromium.org>
* | omap: clean-up dead configsMasahiro Yamada2014-08-09-25/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The following configs are not defined at all. - CONFIG_OMAP1510 - CONFIG_OMAP_1510P1 - CONFIG_OMAP_SX1 - CONFIG_OMAP3_DMA - CONFIG_OMAP3_ZOOM2 - CONFIG_OMAP_INNOVATOR Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Tom Rini <trini@ti.com>
* | fdt: Sync up with libfdtSimon Glass2014-08-09-5/+68
| | | | | | | | | | | | | | | | | | | | | | This brings in changes up to commit f9e91a48 in the libfdt repo. Mostly this is whitespace/minor changes. But there are a few new features: - fdt_size_cells() and fdt_address_cells() - fdt_resize() Signed-off-by: Simon Glass <sjg@chromium.org>
* | fdt: Rename fdt_resize() to fdt_shrink_to_minimum()Simon Glass2014-08-09-1/+1
| | | | | | | | | | | | | | Since libfdt now has an fdt_resize() function, we need to rename the U-Boot one. Signed-off-by: Simon Glass <sjg@chromium.org>
* | ext4: trats: trats2: Modify dfu_alt_info's file names to have absolute pathŁukasz Majewski2014-08-09-6/+6
| | | | | | | | | | | | | | After the clean up performed in the commit 1151b7ac10b81ecbb the DFU subsystem requires absolute patch for correct operation. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
* | Implement generalised RSA public exponents for verified bootMichael van der Westhuizen2014-08-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the verified boot limitation that only allows a single RSA public exponent of 65537 (F4). This change allows use with existing PKI infrastructure and has been tested with HSM-based PKI. Change the configuration OF tree format to store the RSA public exponent as a 64 bit integer and implement backward compatibility for verified boot configuration trees without this extra field. Parameterise vboot_test.sh to test different public exponents. Mathematics and other hard work by Andrew Bott. Tested with the following public exponents: 3, 5, 17, 257, 39981, 50457, 65537 and 4294967297. Signed-off-by: Andrew Bott <Andrew.Bott@ipaccess.com> Signed-off-by: Andrew Wishart <Andrew.Wishart@ipaccess.com> Signed-off-by: Neil Piercy <Neil.Piercy@ipaccess.com> Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com> Cc: Simon Glass <sjg@chromium.org>
* | usb: ehci: rmobile: Remove xHCI addressNobuhiro Iwamatsu2014-08-09-2/+2
| | | | | | | | | | | | | | | | echi-rmobile does not support xHCI. This removes xHCI address from address table. And this revise a value of CONFIG_USB_MAX_CONTROLLER_COUNT for lager board and koelsh board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
* | dfu: add SF backendStephen Warren2014-08-09-0/+22
| | | | | | | | | | | | This allows SPI Flash to be programmed using DFU. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | dfu: add free_entity() to struct dfu_entityStephen Warren2014-08-09-0/+2
| | | | | | | | | | | | | | | | This allows the backend to free any resources allocated during the relevant dfu_fill_entity_*() call. This will soon be used by the SF backend. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | dfu: allow backend to specify a maximum buffer sizeStephen Warren2014-08-09-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | CONFIG_SYS_DFU_DATA_BUF_SIZE may be large to allow for FAT/ext layouts to transfer large files. However, this means that individual write operations will take a long time. Allow backends to specify a maximum buffer size, so that each write operation is limited to a smaller data block. This prevents the DFU protocol from timing out when e.g. writing to SPI flash. I would guess that NAND might benefit from setting this value too, but I can't test that. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | dfu: defer parsing of device string to IO backendStephen Warren2014-08-09-9/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Devices are not all identified by a single integer. To support this, defer the parsing of the device string to the IO backed, so that it can apply the appropriate rules. SPI devices are specified as controller:chip_select. SPI/SF support will be added soon. MMC devices can also be specified as controller[.hwpart][:partition] in many commands, although we don't support that syntax in DFU. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | dfu: fix some issues with reads/uploadsStephen Warren2014-08-09-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DFU read support appears to rely upon dfu->read_medium() updating the passed-by-reference len parameter to indicate the remaining size available for reading. dfu_read_medium_mmc() never does this, and the implementation of dfu_read_medium_nand() will only work if called just once; it hard-codes the value to the total size of the NAND device irrespective of read offset. I believe that overloading dfu->read_medium() is confusing. As such, this patch introduces a new function dfu->get_medium_size() which can be used to explicitly find out the medium size, and nothing else. dfu_read() is modified to use this function to set the initial value for dfu->r_left, rather than attempting to use the side-effects of dfu->read_medium() for this purpose. Due to this change, dfu_read() must initially set dfu->b_left to 0, since no data has been read. dfu_read_buffer_fill() must also be modified not to adjust dfu->r_left when simply copying data from dfu->i_buf_start to the upload request buffer. r_left represents the amount of data left to be read from HW. That value is not affected by the memcpy(), but only by calls to dfu->read_medium(). After this change, I can read from either a 4MB or 1.5MB chunk of a 4MB eMMC boot partion with CONFIG_SYS_DFU_DATA_BUF_SIZE==1MB. Without this change, attempting to do that would result in DFU read returning no data at all due to r_left never being set. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* | fs: implement size/fatsize/ext4sizeStephen Warren2014-08-09-0/+12
|/ | | | | | | | | | These commands may be used to determine the size of a file without actually reading the whole file content into memory. This may be used to determine if the file will fit into the memory buffer that will contain it. In particular, the DFU code will use it for this purpose in the next commit. Signed-off-by: Stephen Warren <swarren@nvidia.com>
* Change Andy Fleming's email addressAndy Fleming2014-08-06-1/+1
| | | | | | | Messages to afleming@freescale.com now bounce, and should be directed to my personal address at afleming@gmail.com Signed-off-by: Andy Fleming <afleming@gmail.com>
* Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2014-08-06-0/+12
|\
| * kmp204x: CPU watchdog enabledBoschung, Rainer2014-08-01-0/+8
| | | | | | | | | | | | | | | | The booting of the board is now protected by the CPU watchdog. A failure during the boot phase will end up in board reset. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * mpc85xx: watchdog initialisation addedBoschung, Rainer2014-08-01-0/+4
| | | | | | | | | | | | | | | | Function to inititialize the cpu watchdog added. Signed-off-by: Rainer Boschung <rainer.boschung@keymile.com> [York Sun: Add prototype in watchdog.h] Reviewed-by: York Sun <yorksun@freescale.com>
* | env_mmc: support env partition setup in runtimeDmitry Lifshitz2014-08-01-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | Add callback with __weak annotation to allow setup of environment partition number in runtime from a board file. Propagate mmc_switch_part() return value into init_mmc_for_env() instead of -1 in case of failure. Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | env_mmc: add mmc_get_env_addr() prototypeDmitry Lifshitz2014-08-01-0/+6
| | | | | | | | | | | | | | Add missing mmc_get_env_addr() prototype in environment.h Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | MMC: atmel_mci: add configuration register definitionBo Shen2014-08-01-1/+13
| | | | | | | | | | | | | | | | Add configuration register definition, this register only exists on MCI IP version >= 0x300. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | MMC: atmel_mci: refactor setting the mode registerBo Shen2014-08-01-0/+4
| | | | | | | | | | | | | | | | The mode register is different between MCI IP version. So, according to MCI IP version to set the mode register. Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | ARM: kirkwood: add mvsdio driverDrEagle2014-08-01-0/+297
| | | | | | | | | | | | | | | | | | This patch add Marvell kirkwood MVSDIO/MMC driver and enable it for Sheevaplugs and OpenRD boards. Signed-off-by: Gerald Kerma <drEagle@doukki.net> Reviewed-by: Stefan Roese <sr@denx.de> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com>
* | include: remove CONFIG_SPL/CONFIG_TPL definition in config headersMasahiro Yamada2014-07-30-69/+0
| | | | | | | | | | | | | | | | | | Now CONFIG_SPL and CONFIG_TPL are defined in Kconfig. Remove the redundant definition in config headers. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | kconfig: delete redundant CONFIG_${ARCH} definitionMasahiro Yamada2014-07-30-1/+0
| | | | | | | | | | | | | | CONFIG_${ARCH} is defined by Kconfig. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | kconfig: switch to KconfigMasahiro Yamada2014-07-30-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit enables Kconfig. Going forward, we use Kconfig for the board configuration. mkconfig will never be used. Nor will include/config.mk be generated. Kconfig must be adjusted for U-Boot because our situation is a little more complicated than Linux Kernel. We have to generate multiple boot images (Normal, SPL, TPL) from one source tree. Each image needs its own configuration input. Usage: Run "make <board>_defconfig" to do the board configuration. It will create the .config file and additionally spl/.config, tpl/.config if SPL, TPL is enabled, respectively. You can use "make config", "make menuconfig" etc. to create a new .config or modify the existing one. Use "make spl/config", "make spl/menuconfig" etc. for spl/.config and do likewise for tpl/.config file. The generic syntax of configuration targets for SPL, TPL is: <target_image>/<config_command> Here, <target_image> is either 'spl' or 'tpl' <config_command> is 'config', 'menuconfig', 'xconfig', etc. When the configuration is done, run "make". (Or "make <board>_defconfig all" will do the configuration and build in one time.) For futher information of how Kconfig works in U-Boot, please read the comment block of scripts/multiconfig.py. By the way, there is another item worth remarking here: coexistence of Kconfig and board herder files. Prior to Kconfig, we used C headers to define a set of configs. We expect a very long term to migrate from C headers to Kconfig. Two different infractructure must coexist in the interim. In our former configuration scheme, include/autoconf.mk was generated for use in makefiles. It is still generated under include/, spl/include/, tpl/include/ directory for the Normal, SPL, TPL image, respectively. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Acked-by: Simon Glass <sjg@chromium.org>
* | include: define CONFIG_SPL and CONFIG_TPL as 1Masahiro Yamada2014-07-30-68/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We are about to switch to Kconfig in the next commit. But there are something to get done beforehand. In Kconfig, include/generated/autoconf.h defines boolean CONFIG macros as 1. CONFIG_SPL and CONFIG_TPL, if defined, must be set to 1. Otherwise, when switching to Kconfig, the build log would be sprinkled with warning messages like this: warning: "CONFIG_SPL" redefined [enabled by default] Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | kconfig: import Kconfig files from Linux 3.16-rc7Masahiro Yamada2014-07-30-0/+46
| | | | | | | | | | | | | | | | | | | | Import - scripts/kconfig/* - include/linux/kconfig.h from Linux 3.16-rc7. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-07-29-329/+660
|\ \
| * | ARM: convert arch_fixup_memory_node to a generic FDT fixup functionMa Haijun2014-07-28-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some architecture needs extra device tree setup. Instead of adding yet another hook, convert arch_fixup_memory_node to be a generic FDT fixup function. [maz: collapsed 3 patches into one, rewrote commit message] Signed-off-by: Ma Haijun <mahaijuns@gmail.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | Merge branch 'u-boot-ti/master' into 'u-boot-arm/master'Albert ARIBAUD2014-07-28-323/+387
| |\ \
| | * | ARM: omap: move board specific NAND configs out from ti_armv7_common.hpekon gupta2014-07-25-8/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves some board specific NAND configs: - FROM: generic config file 'ti_armv7_common.h' - TO: individual board config files using these configs. So that each board can independently set the value as per its design. Following configs are affected in this patch: CONFIG_SYS_NAND_U_BOOT_OFFS: <refer doc/README.nand> CONFIG_CMD_SPL_NAND_OFS: <refer doc/README.falcon> CONFIG_SYS_NAND_SPL_KERNEL_OFFS: <refer doc/README.falcon> CONFIG_CMD_SPL_WRITE_SIZE: <refer doc/README.falcon> This patch also updates documentation for few of above NAND configs. Signed-off-by: Pekon Gupta <pekon@ti.com>
| | * | ARM: omap: clean redundant PISMO_xx macros used in OMAP3pekon gupta2014-07-25-76/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PISMO_xx macros were used to define 'Platform Independent Storage MOdule' related GPMC configurations. This patch - Replaces these OMAP3 specific macros with generic CONFIG_xx macros as provided by current u-boot infrastructure. - Removes unused redundant macros, which are no longer required after merging of common platform code in following commit commit a0a37183bd75e74608bc78c8d0e2a34454f95a91 ARM: omap: merge GPMC initialization code for all platform +-----------------+-----------------------------------------------------------+ | Macro | Reason for removal | +-----------------+-----------------------------------------------------------+ | PISMO1_NOR_BASE | duplicate of CONFIG_SYS_FLASH_BASE | +-----------------+-----------------------------------------------------------+ | PISMO1_NAND_BASE| duplicate of CONFIG_SYS_NAND_BASE | +-----------------+-----------------------------------------------------------+ | PISMO1_ONEN_BASE| duplicate of CONFIG_SYS_ONENAND_BASE | +-----------------+-----------------------------------------------------------+ | PISMO1_NAND_SIZE| GPMC accesses NAND device via I/O mapped registers so | | | configuring GPMC chip-select for smallest allowable | | | segment (GPMC_SIZE_16M) is enough. | +-----------------+-----------------------------------------------------------+ | PISMO1_ONEN_SIZE| OneNAND uses a fixed GPMC chip-select address-space of | | | 128MB (GPMC_SIZE_128M) | +-----------------+-----------------------------------------------------------+ +-----------------+-----------------------------------------------------------+ | PISMO1_NOR | Unused Macros | | PISMO1_NAND | | | PISMO2_CS0 | | | PISMO2_CS1 | | | PISMO1_ONENAND | | | PISMO2_NAND_CS0 | | | PISMO2_NAND_CS1 | | | PISMO1_NOR_BASE | | | PISMO1_NAND_BASE| | | PISMO2_CS0_BASE | | +-----------------+-----------------------------------------------------------+ Signed-off-by: Pekon Gupta <pekon@ti.com>
| | * | ARM: omap: fix GPMC address-map size for NAND and NOR devicespekon gupta2014-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes commit a0a37183bd75e74608bc78c8d0e2a34454f95a91 ARM: omap: merge GPMC initialization code for all platform 1) NAND device are not directly memory-mapped to CPU address-space, they are indirectly accessed via following GPMC registers: - GPMC_NAND_COMMAND_x - GPMC_NAND_ADDRESS_x - GPMC_NAND_DATA_x Therefore from CPU's point of view, NAND address-map can be limited to just above register addresses. But GPMC chip-select address-map can be configured in granularity of 16MB only. So this patch uses GPMC_SIZE_16M for all NAND devices. 2) NOR device are directly memory-mapped to CPU address-space, so its address-map size depends on actual addressable region in NOR FLASH device. So this patch uses CONFIG_SYS_FLASH_SIZE to derive GPMC chip-select address-map size configuration. Signed-off-by: Pekon Gupta <pekon@ti.com>
| | * | board: k2e-evm: add board supportHao Zhang2014-07-25-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds Keystone2 k2e_evm evaluation board support. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * | ARM: keystone2: clock: add K2E clock supportHao Zhang2014-07-25-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds clock definitions and commands to support Keystone2 K2E SOC. Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * | configs: k2hk_evm: config: add common EVM configuration headerHao Zhang2014-07-25-244/+289
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a common config header file for all the Keystone II EVM platforms. It combines a lot of general definitions in one file. The common header included in the EVM should be specific configuration header. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * | ARM: keystone2: move K2HK board files to common KS2 board directoryHao Zhang2014-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch moves K2HK board directory to a common Keystone II board directory. The Board related common functions are moved to a common keystone board file. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Hao Zhang <hzhang@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * | k2hk: use common KS2_ prefix for all hardware definitionsKhoronzhuk, Ivan2014-07-25-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use KS2_ prefix in all definitions, for that replace K2HK_ prefix and add KS2_ prefix where it's needed. It requires to change names also in places where they're used. Align lines and remove redundant definitions in kardware-k2hk.h at the same time. Using common KS2_ prefix helps resolve redundant redefinitions and adds opportunity to use KS2_ definition across a project not thinking about what SoC should be used. It's more convenient and we don't need to worry about the SoC type in common files, hardware.h will think about that. The hardware.h decides definitions of what SoC to use. Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
| | * | ARM: omap: tao3530: Convert to generic boardStefan Roese2014-07-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use generic board setup functions by defining CONFIG_SYS_GENERIC_BOARD. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com>
| | * | tricorder: convert to generic boardAndreas Bießmann2014-07-25-0/+2
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Thomas Weber <thomas.weber@corscience.de>
| | * | k2hk_evm: add script to automate NAND flash processKhoronzhuk, Ivan2014-07-25-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add script to automate NAND flash process. As for now the board has two burn scripts - burn to boot from SPI NOR flash and burn to boot from AEMIF NAND flash, rename burn_uboot script to burn_uboot_spi. Also update README to contain NAND burn U-boot process description. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com>
| | * | mtd: nand: davinci: add opportunity to write keystone U-boot imageKhoronzhuk, Ivan2014-07-25-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Keystone SoCs use the same NAND driver as Davinci. This patch adds opportunity to write Keystone U-boot image to NAND device using appropriate RBL ECC layout. This is needed only if RBL boots U-boot from NAND device and that's supposed that raw u-boot partition is used only for writing image. The main problem is that default Davinci ECC layout is different from Keystone RBL layout. To read U-boot image the RBL needs that image was written using RBL ECC layout. The BBT table is written using default Davinci layout and has to be updated using one. The BBT can be updated only while erasing chip or by forced bad block assigning, so erase function has to use native ecc layout in order to be able to write BBT correctly. So if we're writing to NAND U-boot address we use RBL layout for others we use default ECC layout. Also remove definition for CONFIG_CMD_NAND_ECCLAYOUT as there is no reasons to use ECC layout commands. It was added by mistake. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>