summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* mpc85xx: configs - Add hash command in freescale platformsRuchika Gupta2014-10-16-0/+91
| | | | | | | | | Enable CAAM in platforms supporting the hardware block. Hash command enabled along with hardware accelerated support for SHA-1 and SHA-256 for platforms which have CAAM block. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl_sec: Add hardware accelerated SHA256 and SHA1Ruchika Gupta2014-10-16-0/+45
| | | | | | | | | | SHA-256 and SHA-1 accelerated using SEC hardware in Freescale SoC's The driver for SEC (CAAM) IP is based on linux drivers/crypto/caam. The platforms needto add the MACRO CONFIG_FSL_CAAM inorder to enable initialization of this hardware IP. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl_sec : Change accessor function to take care of endiannessRuchika Gupta2014-10-16-0/+16
| | | | | | | | | | | SEC registers can be of type Little Endian or big Endian depending upon Freescale SoC. Here SoC defines the register type of SEC IP. So update acessor functions with common SEC acessor functions to take care both type of endianness. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* fsl_sec : Move SEC CCSR definition to common includeRuchika Gupta2014-10-16-0/+88
| | | | | | | | | Freescale SEC controller has been used for mpc8xxx. It will be used for ARM-based SoC as well. This patch moves the CCSR defintion of SEC to common include Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* powerpc/P1010RDB:Update RESET_VECTOR_ADDRESS for 768KB u-boot sizeRuchika Gupta2014-10-16-1/+1
| | | | | | | | | | | U-boot binary size has been increased from 512KB to 768KB. So update CONFIG_RESET_VECTOR_ADDRESS to reflect the same for P1010 SPI Flash Secure boot target. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> [York Sun: Modified subject to P1010RDB] Reviewed-by: York Sun <yorksun@freescale.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2014-10-10-535/+662
|\
| * Merge branch 'u-boot-socfpga/topic/arm/socfpga-20141010' into ↵Albert ARIBAUD2014-10-11-1/+1
| |\ | | | | | | | | | 'u-boot-arm/master'
| | * arm: socfpga: Use EMAC1 on SoCDKMarek Vasut2014-10-11-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SoCDK uses EMAC1, not EMAC0. This patch fixes the issue. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <clsee@altera.com> Cc: Dinh Nguyen <dinguyen@altera.com> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Tom Rini <trini@ti.com> Cc: Wolfgang Denk <wd@denx.de> Cc: Pavel Machek <pavel@denx.de>
| * | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2014-10-11-2978/+334
| |\ \ | | |/
| * | arm, at91: add generic board support for the taurus and corvus boardHeiko Schocher2014-10-10-0/+4
| | | | | | | | | | | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Andreas Bießmann <andreas.devel@googlemail.com> Cc: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | ARM: atmel: switch at91sam9263ek to generic boardBo Shen2014-10-10-0/+2
| | | | | | | | | | | | | | | Signed-off-by: Bo Shen <voice.shen@atmel.com> Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2014-10-10-478/+256
| |\ \
| | * | exynos: Enable pre-relocation malloc()Simon Glass2014-10-08-6/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable this feature to support driver model before relocation. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | samsung: Enable device tree for smdkc100Simon Glass2014-10-08-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Change this board to add a device tree. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | samsung: Enable device tree for s5p_goniSimon Glass2014-10-08-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Change this board to add a device tree. This also adds a pinmux header file although it is not used as yet. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | config: Move smdkv310 to use common exynos4 fileSimon Glass2014-10-08-51/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the smdkv310 features are common with other exynos4 boards. To permit easier addition of driver model support, use the common file and add a device tree file. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | config: Move arndale to use common exynos5250 fileSimon Glass2014-10-08-212/+66
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Most of the arndale features are common with other exynos5250 boards. To permit easier addition of driver model support, use the common file. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | exynos: config: Move cros_ec and tps65090 out of smdk boardsSimon Glass2014-10-08-18/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | These boards do not in fact have a Chrome OS EC, nor a TPS565090 PMIC, so move the settings into a separate common file to be used by those that need it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | exynos: Move common smdk5420 things to common fileSimon Glass2014-10-08-11/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few things are common but are not in the common file. Fix this and rename the file to fit with the other exynos*-common files. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | exynos: Move common exynos settings into a common fileSimon Glass2014-10-08-171/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since exynos4 and exyno5 share many settings, we should move these into a common file to avoid duplication. In effect the changes are that all exynos boards now have EXT4 and FAT write support. This affects exynos5250 and exynos5420 which previously did not. This also disables the ext2 commands which are equivalent to ext4 anyway. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | exynos: Rename -dt config files to -commonSimon Glass2014-10-08-16/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We want exynos5250-dt.h to be a board which can support any exynos5250 device. This matches the naming used by Linux. As a first step, rename the existing -dt files to -common to make it clear they are common files, and not specific boards. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | dm: exynos: Split out the cros_ec driversSimon Glass2014-10-08-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the driver model conversion we are going to be using driver model for SPI and not for I2C. This works OK so long as a board doesn't need both dm and non-dm versions of the cros_ec driver. Since pit uses SPI and snow uses I2C we need to split the configs so that only one driver is compiled for each platform. We can fix this later when driver model supports I2C. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | cros_ec: exynos: Use the correct tps65090 driver in each caseSimon Glass2014-10-08-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Exynos 5250 boards (snow, spring) use the I2C driver but Exynos 5420 boards cannot due to a hardware design decision. Select the correct driver to use in each case. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * | exynos5: Enable data cacheSimon Glass2014-10-08-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Things run faster when the data cache is enabled, so turn it on along with the 'dcache' command. Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | | arm: rmobile: koelsch: Add CONFIG_SCIF_USE_EXT_CLKNobuhiro Iwamatsu2014-10-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SCIF of koelsch use external clock mode. This enables external clock mode on koelsch board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | | arm: rmobile: lager: Add CONFIG_SCIF_USE_EXT_CLKNobuhiro Iwamatsu2014-10-09-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | SCIF of lager use external clock mode. This enables external clock mode on lager board. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | | arm: rmobile: lager: Fix value of CONFIG_SH_SCIF_CLK_FREQNobuhiro Iwamatsu2014-10-09-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The clock of SCIF (serial port) of lager is supplied from External Clock. And value of clock is 14.7456MHz. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
| * | | Merge remote-tracking branch 'u-boot-imx/master'Albert ARIBAUD2014-10-08-55/+396
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The single file conflict below is actually trivial. Conflicts: board/boundary/nitrogen6x/nitrogen6x.c
| | * | | nitrogen6x: config: enable EXT4 filesystemKevin Mihelich2014-10-06-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support reading/writing ext4 partitions. Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: enable Android fastbootEric Nelson2014-10-06-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable 'fastboot' command. This is currently enabled but not yet functional. Including it in the configuration will ease further testing and development as discussed on the mailing list. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: add gpio commandEric Nelson2014-10-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the 'gpio' command to allow reading and toggling of GPIO pins. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: disable logoEric Nelson2014-10-06-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some users (QNX and Windows CE users in particular) have asked to disable the Penguin shown on the display at boot time. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
| | * | | nitrogen6x: config: allow more bootargs parametersTroy Kisky2014-10-06-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase the maximum number of arguments allowed by the Hush parser. This prevents errors when users or scripts aren't quoting parameters when setting the "bootargs" variable et al. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: enable "i2c edid"Eric Nelson2014-10-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the "i2c edid" command to query data from an attached HDMI monitor. Usage is typically this: U-Boot > i2c dev 1 U-Boot > i2c edid 0x50 ... Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: add CONFIG_CMD_MEMTESTEric Nelson2014-10-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the 'mtest' command on Nitrogen6x and SABRE Lite boards. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: enable USB keyboard supportEric Nelson2014-10-06-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the use of USB keyboards on SABRE Lite and Nitrogen6x boards. Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: expose SATA, then MMC over USBEric Nelson2014-10-06-1/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If no boot script was found, expose internal storage over the USB mass storage gadget to allow easy programming. This is especially useful when SD cards are inaccessible or when loading SATA drives. More details are available in this blog post: http://boundarydevices.com/u-boot-usb-mass-storage-gadget/ Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: add initrd_highEric Nelson2014-10-06-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support RAM disks by setting initrd_high. See commit 7e9603e Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: use FS_GENERIC load commandKevin Mihelich2014-10-06-12/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the individual attempts to load using ext2 and fat, replace with the generic load command supporting available filesystem types. Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
| | * | | nitrogen6x: config: allow boot to USB stickDiego Rondini2014-10-06-3/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables boot to USB storage devices by expanding on the list of boot devices. Because the USB startup currently takes a long time, it places USB at the end of the list of supported devices. You can over-ride the boot order using the bootdevs environment variable. For instance, this will make USB the first (highest priority) device: U-Boot > setenv bootdevs usb mmc sata U-Boot > saveenv Signed-off-by: Diego Rondini <diego.rondini@kynetics.it> Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | nitrogen6x: config: add USB Mass Storage (ums) supportEric Nelson2014-10-06-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the USB mass storage to enable access to on-board storage (especially eMMC and SATA). Details at: http://boundarydevices.com/u-boot-usb-mass-storage-gadget/ Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
| | * | | imx6: add Bachmann OT1200 boardChristian Gmeiner2014-10-06-0/+197
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the OT1200 series of devices. Following components are used in u-boot: + ethernet + i2c + emmc + gpio For more details see README. Changes v1 > v2 - make use of enable_cspi_clock(..) - fix usage of OUTPUT_40OHM define - added README Changes v2 > v3 - improve spelling in README - added own copy of mx6q_4x_mt41j128.cfg Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
| | * | | arm: m53evk: Zap superfluous tab in envMarek Vasut2014-10-06-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove this tab from env, since it's useless, just use spaces. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * | | arm: m28evk: Zap superfluous tab in envMarek Vasut2014-10-06-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove this tab from env, since it's useless, just use spaces. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * | | mx6sxsabresd: Fix PCI reset and power GPIO assignmentsFabio Estevam2014-10-06-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | PERST_GPIO and POWER_GPIO are currently swapped. Fix the GPIO assignments as per the board schematics. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | wandboard: Select CONFIG_CMD_FUSEFabio Estevam2014-10-01-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Select CONFIG_CMD_FUSE so that the fuse API commands can be used. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| | * | | imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boardsYe.Li2014-09-30-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the ddr scripts for LPDDR2 and add two build configs for LPDDR2 arm2 board. Since the LPDDR2 arm2 board has different DDR size, use CONFIG_DDR_MB in defconfig to replace the PHYS_SDRAM_SIZE. Signed-off-by: Ye.Li <B37916@freescale.com>
| | * | | imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 boardYe.Li2014-09-30-1/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2 shared the same board with i.MX6Q ARM2 board since the i.MX6DL is pin-pin compatible with i.MX6Q. The patch also support the DDR 32-BIT mode option. Please define CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT mode.But due to the board design, it's 64bit DDR buswidth physically, so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it. Signed-off-by: Ye.Li <B37916@freescale.com>
| | * | | arm: m53evk: Enable FS_GENERICMarek Vasut2014-09-29-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the CONFIG_CMD_FS_GENERIC on m53evk to avoid per-fs specific commands and tweak the environment to cater for this new option. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| | * | | arm: m28evk: Enable FS_GENERICMarek Vasut2014-09-29-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the CONFIG_CMD_FS_GENERIC on m28evk to avoid per-fs specific commands and tweak the environment to cater for this new option. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
generated by cgit v1.1 at 2024-11-11 18:26:45 +0000