summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* mii: miiphy register address width changeChandan Nath2011-12-06-6/+6
| | | | | | | | | | | This patch is added for PHY whose register offset value exceeds 0xFF and cannot be used with "unsigned char" datatype in miiphy_read, miiphy_write and miiphy_register functions. Datatype of register offset is changed to unsigned short instead of unsigned char so that offset value greater then 0xFF can be used. Signed-off-by: Chandan Nath <chandan.nath@ti.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Standalone Apps: Standalone apps should need only exports.h.Mike Partington2011-12-06-4/+1
| | | | | | | | | Modify exports.h to remove its dependencies on other files, thus enabling standalone apps to require only exports.h from the U-Boot source tree. This appears to be the intent based on the following note: http://lists.denx.de/pipermail/u-boot/2010-January/067174.html Signed-off-by: Mike Partington <mparting@lexmark.com>
* Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk2011-12-05-5/+5
|\ | | | | | | | | | | | | | | | | | | * 'agust@denx.de' of git://git.denx.de/u-boot-staging: Makefile: add tools/mkenvimage to target 'clean' mv_common.c: get rid of 'defined but not used' warning m68k: fix ambiguous bit testing sparc: fix unknown escape sequence warnings sparc: fix unused variable warnings sf: fix erase debug output
| * sparc: fix unknown escape sequence warningsMike Frysinger2011-12-05-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I don't know what exactly the code was going for, but the object code is the same before/after my change, and in looking at the env strings, this seems to be OK. Otherwise gcc warns: cc1: warning: unknown escape sequence: '\$' cc1: warning: unknown escape sequence: '\)' cc1: warning: unknown escape sequence: '\040' cc1: warning: unknown escape sequence: '\$' cc1: warning: unknown escape sequence: '\)' Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | serial: constify serial_assign()Gerlando Falauto2011-12-05-1/+1
| | | | | | | | | | Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | serial: cosmetic checkpatch complianceGerlando Falauto2011-12-05-9/+10
| | | | | | | | | | Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | sh: Add support for ecovec boardNobuhiro Iwamatsu2011-12-02-0/+200
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The ecovec board has SH7724, 256MB DDR2-SDRAM, USB, Ethernet, and more. This patch supports the following functions: - 256MB DDR2-SDRAM - USB - I2C - Ethernet Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: espt: change config for new sh_eth driverYoshihiro Shimoda2011-12-02-0/+4
| | | | | | | | | | | | | | The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh7763rdp: change config for new sh_eth driverYoshihiro Shimoda2011-12-02-0/+4
| | | | | | | | | | | | | | The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh: Add a flag which controls the DDR ECC mode of sh7757lcrNobuhiro Iwamatsu2011-12-02-0/+1
| | | | | | | | | | | | | | | | | | | | | | When DDR-ECC is effective, the physical memory which can be used reduces this boardby half. However, this mode can chenge to disable. When it was disabled, user can use 512 MB of physical memory. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com> Acked-by: "Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* | sh7757lcr: change config for new sh_eth driverYoshihiro Shimoda2011-12-02-0/+4
|/ | | | | | | The new sh_eth driver uses the phy driver. So, this patch enables it. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
* Merge branch 'sr@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk2011-12-02-0/+1
|\ | | | | | | | | | | * 'sr@denx.de' of git://git.denx.de/u-boot-staging: image: Don't detect XIP images as overlapping. image: Implement IH_TYPE_KERNEL_NOLOAD
| * image: Implement IH_TYPE_KERNEL_NOLOADStephen Warren2011-12-01-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The legacy uImage format includes an absolute load and entry-point address. When bootm operates on a kernel uImage in memory that isn't loaded at the address in the image's load address, U-Boot will copy the image to its address in the header. Some kernel images can actually be loaded and used at any arbitrary address. An example is an ARM Linux kernel zImage file. To represent this capability, IH_TYPE_KERNEL_NOLOAD is implemented, which operates just like IH_TYPE_KERNEL, except that the load address header is ignored, and U-Boot does not copy the image to its load address, but rather uses it in-place. This is useful when sharing a single (uImage-wrapped) zImage across multiple boards with different memory layouts; in this case, a specific load address need not be picked when creating the uImage, but instead is selected by the board-specific U-Boot environment used to load and boot that image. v2: Rename from IH_TYPE_KERNEL_ANYLOAD to IH_TYPE_KERNEL_NOLOAD. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-ppc4xxWolfgang Denk2011-12-02-0/+587
|\ \ | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-ppc4xx: ppc4xx: Add Io64 board support ppc4xx: fix PMC440 painit command ppc4xx: remove invalid access to PCI_BRDGOPT2 register ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementation
| * | ppc4xx: Add Io64 board supportDirk Eibach2011-12-01-0/+585
| | | | | | | | | | | | | | | | | | | | | Board support for the Guntermann & Drunck Io64. Signed-off-by: Dirk Eibach <eibach@gdsys.de> Signed-off-by: Stefan Roese <sr@denx.de>
| * | ppc4xx: use CONFIG_PCI_BOOTDELAY instead of private implementationMatthias Fuchs2011-12-01-0/+2
| |/ | | | | | | | | | | | | | | | | This patch switches PMC440 board code to the CONFIG_PCI_BOOTDELAY option instead of using a private implemention. This relies on Anatolji's patch that moves the pcidelay handling behind pci_target_init. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxWolfgang Denk2011-12-01-26/+669
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mpc85xx: mpc85xx: support for Freescale COM Express P2020 arch/powerpc/cpu/mpc8xxx/ddr/interactive.c: Fix GCC 4.6 build warning mpc85xx: support board-specific reset function powerpc/85xx: verify the localbus device tree address before booting the OS mpc8xxx: update module_type values from JEDEC DDR3 SPD Specification powerpc/p3060qds: Add board related support for P3060QDS platform powerpc/85xx: clean up and document the QE/FMAN microcode macros powerpc/85xx: always implement the work-around for Erratum SATA_A001 powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.h powerpc/85xx: Add workaround for erratum A-003474 powerpc/85xx: fixup flexcan device tree clock-frequency powerpc/85xx: Add workaround for erratum CPU-A003999
| * | mpc85xx: support for Freescale COM Express P2020Ira W. Snyder2011-11-29-0/+576
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Freescale COM Express P2020 board. This board is similar to the P1_P2_RDB, but has some extra (as well as missing) peripherals. Unlike all other mpc85xx boards, it uses a watchdog timeout to reset. Using the HRESET_REQ register does not work. This board has no NOR flash, and can only be booted via SD or SPI. This procedure is documented in Freescale Document Number AN3659 "Booting from On-Chip ROM (eSDHC or eSPI)." Some alternative documentation is provided in Freescale Document Number P2020RM "P2020 QorIQ Integrated Processor Reference Manual" (section 4.5). Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | mpc8xxx: update module_type values from JEDEC DDR3 SPD SpecificationIra W. Snyder2011-11-29-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Newer JEDEC DDR3 SPD Specifications define several additional values for the DDR3 module_type field which were undefined when this code was written. Update the code to handle the newer module types. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Cc: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/p3060qds: Add board related support for P3060QDS platformShengzhou Liu2011-11-29-1/+53
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The P3060QDS is a Freescale reference board for the six-core P3060 SOC. P3060QDS Board Overview: Memory subsystem: - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus) - 128M Bytes NOR flash single-chip memory - 16M Bytes SPI flash - 8K Bytes AT24C64 I2C EEPROM for RCW Ethernet: - Eight Ethernet controllers (4x1G + 4x1G/2.5G) - Three VSC8641 PHYs on board (2xRGMII + 1xMII) - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3 PCIe: Two PCI Express 2.0 controllers/ports USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board I2C: Four I2C controllers UART: Supports two dUARTs up to 115200 bps for console RapidIO: Two RapidIO, sRIO1 and sRIO2 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: clean up and document the QE/FMAN microcode macrosTimur Tabi2011-11-29-19/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Several macros are used to identify and locate the microcode binary image that U-boot needs to upload to the QE or Fman. Both the QE and the Fman use the QE Firmware binary format to package their respective microcode data, which is why the same macros are used for both. A given SOC will only have a QE or an Fman, so this is safe. Unfortunately, the current macro definition and usage has inconsistencies. For example, CONFIG_SYS_FMAN_FW_ADDR was used to define the address of Fman firmware in NOR flash, but CONFIG_SYS_QE_FW_IN_NAND contains the address of NAND. There's no way to know by looking at a variable how it's supposed to be used. In the future, the code which uploads QE firmware and Fman firmware will be merged. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | powerpc/85xx: CONFIG_FSL_SATA_V2 should be defined in config_mpc85xx.hTimur Tabi2011-11-29-6/+2
| |/ | | | | | | | | | | | | | | | | | | | | Macro CONFIG_FSL_SATA_V2 is defined if the SOC has a V2 Freescale SATA controller, so it should be defined in config_mpc85xx.h instead of the various board header files. So now CONFIG_FSL_SATA_V2 is always defined on the P1013, P1022, P2041, P3041, P5010, and P5020. It was already defined for the P1010 and P1014. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* | x86: Provide more configuration granularityGraeme Russ2011-11-29-0/+5
|/ | | | | | Planned future ports requires more granularity for some options Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
* dataflash: fix parameters order in write_dataflash()Igor Grinberg2011-11-27-1/+2
| | | | | | | | | Fix parameters order in write_dataflash() function extern declaration in the header file. Parameters order, as in function definition, should be: addr_dest, addr_src, size. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* davinci_sonata: define CONFIG_MACH_TYPE for davinci_sonata boardChristian Riesch2011-11-27-0/+2
| | | | | | | | This patch fixes the build breakage for the davinci_sonata board. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sergey Kubushyn <ksi@koi8.net> Cc: Sandeep Paulraj <s-paulraj@ti.com>
* davinci_schmoogie: define CONFIG_MACH_TYPE for davinci_schmoogie boardChristian Riesch2011-11-27-0/+3
| | | | | | | | This patch fixes the build breakage for the davinci_schmoogie board. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Cc: Sergey Kubushyn <ksi@koi8.net> Cc: Sandeep Paulraj <s-paulraj@ti.com>
* arm: a320evb: define mach-type in board config fileYan-Pai Chen2011-11-27-0/+6
| | | | | | | | MACH_TYPE_FARADAY was dropped from mach-types.h. Add it back to board config file. Signed-off-by: Yan-Pai Chen <ypchen@faraday-tech.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* Fix Stelian's email addressStelian Pop2011-11-27-12/+12
| | | | | | | Change my old email address which is no longer valid. Signed-off-by: Stelian Pop <stelian@popies.net> Signed-off-by: Anatolij Gustschin <agust@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-mmcWolfgang Denk2011-11-27-0/+1
|\ | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-mmc: Revert "mmc: retry the cmd8 to meet 74 clocks requirement in the spec" mmc: mv_sdhci: Fix host version read for Armada100
| * mmc: mv_sdhci: Fix host version read for Armada100Ajay Bhargav2011-11-25-0/+1
| | | | | | | | | | | | | | | | sdhci_readw does not work for host version read in Armada100 series SoCs. This patch fix this issue by making a sdhci_readl call to get host version. Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
* | microblaze: usable uart16550 for big endian systemsStephan Linz2011-11-27-2/+6
|/ | | | | | | | | | | | | As a result of the commit 6833260 the uart16550 driver is broken for Microblaze big endian systems, because of the missing 3 byte offset. Other than as described, not all U-Boot BSP will treat properly the 3 byte offset. This why prefer to mask out the 3 byte offset in general and setup correct _REG_SIZE value depending on edianess. Signed-off-by: Stephan Linz <linz@li-pro.net> Tested-by: Michal Simek <monstr@monstr.eu>
* Fix clash between IH_ARCH_NDS32 and IH_ARCH_SANDBOXStefan Kristiansson2011-11-23-1/+1
| | | | | | | | NDS32 and SANDBOX architecture were sharing the same IH_ARCH number Signed-off-by: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Acked-by: Macpaul Lin <macpaul@andestech.com> Acked-by: Marek Vasut <marek.vasut@gmail.com>
* env: clean env_common.c checkpatch and code styleIgor Grinberg2011-11-22-0/+8
| | | | | | Cleanup the env_common.c checkpatch warnings, errors and coding style. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* env: clean env_dataflash.c checkpatch and code styleIgor Grinberg2011-11-22-0/+2
| | | | | | | Cleanup the env_dataflash.c checkpatch warnings, errors and coding style. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* env: clean cmd_nvedit.c checkpatch and code styleIgor Grinberg2011-11-22-0/+6
| | | | | | | | | | | | | | Cleanup the cmd_nvedit.c checkpatch warnings, errors and coding style. There are 10 wanrings left about the simple_strtoul() function: WARNING: simple_strtoul is obsolete, use kstrtoul instead #359: FILE: cmd_nvedit.c:359: + load_addr = simple_strtoul(argv[2], NULL, 16); ... total: 0 errors, 10 warnings, 1043 lines checked Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* env: move extern environment[] to environment.hIgor Grinberg2011-11-22-0/+4
| | | | | | | Extract all extern declarations for environment out of c files into the environment.h header. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* env: move extern default_environment[] to environment.hIgor Grinberg2011-11-22-0/+2
| | | | | | | | | Extract all extern declarations for default_environment[] out of c files into the environment.h header. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Stefan Roese <sr@denx.de> Acked-by: Stefan Roese <sr@denx.de>
* common: move extern char console_buffer[] to common.hIgor Grinberg2011-11-22-0/+1
| | | | | | | | | Extract all extern declarations for console_buffer[] out of c files into the common.h header. Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Cc: Frank Gottschling <fgottschling@eltec.de> Cc: Murray Jensen <Murray.Jensen@csiro.au>
* env: clean environment.h checkpatch and code styleIgor Grinberg2011-11-22-21/+23
| | | | | | | | | | | Though one warning left: WARNING: do not add new typedefs #149: FILE: u-boot/include/environment.h:149: +typedef struct environment_s { total: 0 errors, 1 warnings, 181 lines checked Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* Define uintptr_t as long int to simplify printf() format stringsSimon Glass2011-11-22-9/+3
| | | | | | | | | | If uintptr_t can be either an unsigned int or an unsigned long int, it is tricky to use it in a printf() format string. This changes it to unsigned long int consistently. This should do the right thing on both 32-bit and 64-bit architectures. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
* Merge branch 'sr@denx.de' of git://git.denx.de/u-boot-stagingWolfgang Denk2011-11-21-4/+29
|\ | | | | | | | | | | * 'sr@denx.de' of git://git.denx.de/u-boot-staging: Makefile: Add the missing dependency for spl target gpio: Adapt PCA9698 to standard GPIO API
| * gpio: Adapt PCA9698 to standard GPIO APIDirk Eibach2011-11-18-4/+29
| | | | | | | | | | | | Signed-off-by: Dirk Eibach <eibach@gdsys.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Acked-by: Stefan Roese <sr@denx.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-niosWolfgang Denk2011-11-21-0/+4
|\ \ | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-nios: nios2: Offer ft_board_setup() capability and call fdt_fixup_ethernet(). board/nios2-generic: Use altera_pio driver and remove board specific driver gpio: Add driver for Altera's PIO core nios2: Pseudo implement dcache_status/enable/disable()
| * | board/nios2-generic: Use altera_pio driver and remove board specific driverJoachim Foerster2011-10-28-0/+4
| | | | | | | | | | | | | | | Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com> Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
* | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2011-11-16-4613/+4659
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of /home/wd/git/u-boot/custodians: api: export LCD device to external apps font: split font data from video_font.h tools: logo: split bmp arrays from bmp_logo.h lcd: add clear and draw bitmap declaration VIDEO: mx3fb: GCC4.6 fix build warnings Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
| * \ \ Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2011-11-16-4613/+4659
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * 'master' of git://git.denx.de/u-boot-video: api: export LCD device to external apps font: split font data from video_font.h tools: logo: split bmp arrays from bmp_logo.h lcd: add clear and draw bitmap declaration VIDEO: mx3fb: GCC4.6 fix build warnings Powerpc/DIU: Fixed the 800x600 and 1024x768 resolution bug
| | * | | api: export LCD device to external appsChe-Liang Chiou2011-11-15-0/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch exports LCD info-query and bitmap-rendering functions to external apps. This patch is tested on a Seaboard. Because the LCD driver is not yet upstreamed, the test was done in a local downstream repo. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org>
| | * | | font: split font data from video_font.hChe-Liang Chiou2011-11-15-4613/+4640
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While video_font.h is useful even without referencing the font data, it is not possible to be included multiple times because it defines font data array right in the header. This patch splits the font data array into video_font_data.h and so now video_font.h can be included multiple times. This at least solves the code duplication in board/mcc200/lcd.c. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
| | * | | tools: logo: split bmp arrays from bmp_logo.hChe-Liang Chiou2011-11-15-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The generated header bmp_logo.h is useful even outside common/lcd.c for the logo dimension. However, the problem is, the generated bmp_logo.h cannot be included multiple times because bmp_logo_palette[] and bmp_logo_bitmap[] are defined in the bmp_logo.h. This patch fixes this by defining these arrays in another header bmp_logo_data.h and in bmp_logo.h only declaring these arrays. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
| | * | | lcd: add clear and draw bitmap declarationChe-Liang Chiou2011-11-15-0/+2
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions for clearing and drawing bitmaps on the screen were not exposed publicly and are made public in this patch in preparation for implementing the display interface of api_public.h. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Anatolij Gustschin <agust@denx.de>
generated by cgit v1.1 at 2024-11-10 20:14:34 +0000