summaryrefslogtreecommitdiff
path: root/include
Commit message (Collapse)AuthorAgeLines
* AM335X: Set fdt_high for AM335X devices to enable booting with Device Treehvaibhav@ti.com2013-02-07-0/+1
| | | | | | | | | | | | | | For AM335X boards, such as the EVM and Bone Linux kernel fails to locate the device tree blob on boot. The reason being is that u-boot is copying the DT blob to the upper part of RAM when booting the kernel and the kernel is unable to access the blob. By setting the fdt_high variable to 0xffffffff (to prevent the copy) the kernel is able to locate the DT blob and boot. This patch is tested on BeagleBone platform. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Tom Rini <trini@ti.com>
* pcm051: Add support for Phytec phyCORE-AM335xLars Poeschel2013-02-07-0/+301
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board is named pcm051 and has this hardware: SOC: TI AM3359 DDR3-RAM: 2x MT41J256M8HX-15EIT:D 512MiB ETH 1: LAN8710AI SPI-Flash: W25Q64BVSSIG RTC: RV-4162-C7 I2C-EEPROM: CAT32WC32 NAND: MT29F4G08_VFPGA63 PMIC: TPS65910A3 LCD Supported: UART 1 MMC/SD ETH 1 USB I2C SPI Not yet supported: NAND RTC LCD Signed-off-by: Lars Poeschel <poeschel@lemonage.de> [trini: Add #define CONFIG_PHY_ADDR 0 to config] Signed-off-by: Tom Rini <trini@ti.com>
* omap4: allow the use of a plain text env file instead boot scriptsJavier Martinez Canillas2013-02-07-3/+14
| | | | | | | | | | | | | | | | | | | | | For production systems it is better to use script images since they are protected by checksums and carry valuable information like name and timestamp. Also, you can't validate the content passed to env import. But for development, it is easier to use the env import command and plain text files instead of script-images. Since both OMAP4 supported boards (Panda and TI SDP4430) are used primarily for development, this patch allows U-Boot to load env var from a text file in case that an boot.scr script-image is not present. The variable uenvcmd (if existent) will be executed (using run) after uEnv.txt was loaded. If uenvcmd doesn't exist the default boot sequence will be started. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Nishanth Menon <nm@ti.com>
* OMAP3: igep00x0: add boot status GPIO LEDJavier Martinez Canillas2013-02-07-0/+3
| | | | | | | | | | | | | This patch adds an GPIO LED boot status for IGEP boards. The GPIO LED used is the red LED0 while the Linux kernel uses the green LED0 as the boot status. By using different GPIO LEDs, the user can know in which step of the boot process the board currently is. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* OMAP3: use a single board file for IGEP devicesJavier Martinez Canillas2013-02-07-0/+2
| | | | | | | | | | | | | | | | | Even when the IGEPv2 board and the IGEP Computer-on-Module are different from a form factor point of view, they are very similar in the fact that share many components and how they are wired. So, it is possible (and better) to have a single board file for both devices and just use the CONFIG_MACH_TYPE to make a differentiation between each board when needed. This change avoids code duplication by removing 298 lines of code and makes future maintenance easier. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-02-02-5/+436
|\
| * mx23evk: Add initial board supportOtavio Salvador2013-01-28-0/+202
| | | | | | | | | | | | | | | | | | | | The following features are supported: * 128 MB DDR1 SDRAM * DUART * SD/MMC Card Socket Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx23_olinuxino: Add default environmentOtavio Salvador2013-01-28-7/+70
| | | | | | | | | | | | This adds a default environment with support for MMC booting. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mxs: mmc: mx23_olinuxino: Add MMC supportMarek Vasut2013-01-28-0/+12
| | | | | | | | | | | | | | | | | | Add support for the MMC attached to SSP1. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Stefano Babic <sbabic@denx.de>
| * net: fec_mxc: get phydev before fec_probeTroy Kisky2013-01-28-0/+7
| | | | | | | | Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * phy: add phy_find_by_mask/phy_connect_devTroy Kisky2013-01-28-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | It is useful to be able to try a range of possible phy addresses to connect. Also, an ethernet device is not required to use phy_find_by_mask leading to better separation of mii vs ethernet, as suggested by Andy Fleming. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * net: fec_mxc: delete CONFIG_FEC_MXC_MULTITroy Kisky2013-01-28-3/+0
| | | | | | | | | | | | | | It is more logical to test for CONFIG_FEC_MXC_PHYADDR to determine whether to define the function fecmxc_initialize. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
| * mx6qsabre_common: Let mmc partition be board specificFabio Estevam2013-01-28-1/+2
| | | | | | | | | | | | | | | | | | | | commit 49ea0ff5 (49ea0ff5) introduced CONFIG_SYS_MMC_ENV_PART into mx6qsabresd.h to store the mmc partition, but in order for it to have effect we should place it into 'mmcpart' variable. Also add CONFIG_SYS_MMC_ENV_PART into mx6qsabreauto.h. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6qsabreauto: enable USB host interfaceKnut Wohlrab2013-01-28-0/+11
| | | | | | | | | | | | The USB host interface is routed to plug USB1/J30 on the mother board. Signed-off-by: Knut Wohlrab <knut.wohlrab@de.bosch.com>
| * mxs: Add MX23 olinuxino board supportMarek Vasut2013-01-21-0/+135
| | | | | | | | | | | | | | | | | | This patch adds support for MX23-based Olinuxino board. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Stefano Babic <sbabic@denx.de>
| * mxs: Linux uses ttyAMA0 as DUARTMarek Vasut2013-01-21-1/+1
| | | | | | | | | | | | | | Replace use of ttyAM0 with ttyAMA0 as default serial console. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stefano Babic <sbabic@denx.de>
* | Tegra30: I2C: Enable I2C driver on CardhuTom Warren2013-01-16-0/+57
| | | | | | | | | | | | | | | | | | Tested all 5 'buses', i2c probe enumerates device addresses on all but dev 4 (I2C4) [no devices on that bus on my Cardhu]. Note that this uses the extant tegra_i2c.c driver w/o modification. Signed-off-by: Tom Warren <twarren@nvidia.com>
* | Tegra30: Add/enable Cardhu build (T30 reference board)Tom Warren2013-01-16-173/+301
| | | | | | | | | | | | | | | | | | | | | | This build is stripped down. It boots to the command prompt. GPIO is the only peripheral supported. Others TBD. include/configs/tegra-common.h now holds common config options for Tegra SoCs. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | Tegra30: Add generic Tegra30 build supportTom Warren2013-01-16-1/+1
| | | | | | | | | | | | | | | | This patch adds basic Tegra30 (T30) build support - no specific board is targeted. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | tegra: remove custom TEGRA_DEVICE_SETTINGS for board filesMarc Dietrich2013-01-16-18/+0
| | | | | | | | | | | | | | | | | | | | | | TEGRA_DEVICE_SETTINGS lives now in tegra-common-post.h. This removes custom TEGRA_DEVICE_SETTINGS for all tegra boards providing video output, except seaboard, which was fixed by Stephen already. Cc: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: enable LCD on PAZ00Marc Dietrich2013-01-16-0/+15
| | | | | | | | | | | | | | | | This adds LCD panel descriptions to the device tree of PAZ00 and enables LCD support in the configuration. Signed-off-by: Marc Dietrich <marvin24@gmx.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Enable LCD on TECThierry Reding2013-01-16-1/+14
| | | | | | | | | | | | | | | | | | The TEC ships with a 7" LCD panel that provides a resolution of 800x480 pixels. Add a corresponding panel description to the device tree and enable LCD support in the configuration. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Enable LCD on Medcom-WideThierry Reding2013-01-16-0/+14
|/ | | | | | | | | The Medcom-Wide has a 15" LCD panel with a resolution of 1366x768 pixels. Add a corresponding panel description to the device tree and enable LCD support in the configuration. Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Tom Warren <twarren@nvidia.com>
* watchdog.h: Move hw_watchdog_init prototype to end, guardTom Rini2013-01-14-1/+4
| | | | | | | | | In commit abbab70 we added a prototype for hw_watchdog_init, in a Freescale i.MX watchdog driver. We did not however guard it with an __ASSEMBLY__ check and broke some platforms. Move this to the end of the file with other prototypes and guard it. Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'u-boot-imx/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-14-49/+193
|\
| * mx6qsabresd: Fix booting the kernel from SDHC3Fabio Estevam2013-01-13-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit de7d02aeb (mx6qsabresd: add usdhc2 and usdhc4 support) SDHC3 device node is no longer 0, which breaks loading a uImage from SDHC3. Fix it by adapting the default environment to use CONFIG_SYS_MMC_ENV_DEV as the correct mmc node for loading the kernel from. While at it, go back to using SDHC3 as the default mmc, since we have Yocto images that generate an SD card containing U-boot,kernel and rootfs, so it is more convenient to keep using SDHC3 as it was originally. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6qsabre{auto, sd}: Add support to dynamically choose between fdt use or notOtavio Salvador2013-01-13-3/+40
| | | | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
| * mx6qsabrelite: Add support to dynamically choose between fdt use or notOtavio Salvador2013-01-13-2/+37
| | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mx53loco: Add support to dynamically choose between fdt use or notOtavio Salvador2013-01-13-4/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The CONFIG_SYS_CBSIZE has been change to 512 to avoid runtime errors as: ,---[ Runtime error ] | Hit any key to stop autoboot: 0 | MX53LOCO U-Boot > pri netboot | netboot=echo Booting from net ...; run netargs; if test ... | prefetch abort | pc : [<20747368>] lr : [<20747365>] | sp : af566e20 ip : 00000000 fp : 00000000 | r10: 00000002 r9 : af6dfc28 r8 : af566f58 | r7 : af6dfc10 r6 : 00000001 r5 : 00000002 r4 : 74206669 | r3 : 00000000 r2 : 00000060 r1 : 00000020 r0 : 0000018e | Flags: nZCv IRQs off FIQs off Mode SVC_32 | Resetting CPU ... | | resetting ... `--- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mx28evk: Add support to dynamically choose between fdt use or notOtavio Salvador2013-01-13-3/+38
| | | | | | | | Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mx28evk: We shouldn't hardcode a rootfs filesystem typeOtavio Salvador2013-01-13-4/+2
| | | | | | | | | | | | | | For a generic environment, we shouldn't have a fixed rootfs filesystem so we drop it from env. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mx6qsabrelite: Use tabs to environment settingOtavio Salvador2013-01-13-33/+33
| | | | | | | | | | | | | | This rework the environment to use tabs for environment setting as done in other boards. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
| * mx31/mx35/mx51/mx53/mx6: add watchdogTroy Kisky2013-01-13-0/+3
| | | | | | | | | | | | | | Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Acked-by: Stefano Babic <sbabic@denx.de>
* | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-01-14-282/+401
|\ \
| * | EXYNOS5: Enable console multiplexing in u-bootAjay Kumar2013-01-11-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We enable console multiplexing and use both serial and LCD for stdout/stderr. Initially, u-boot output console is observed via serial port. If you also have a DP panel connected onto your SMDK5250 board, you can switch to LCD console by typing "setenv stdout lcd". You can always switch back to serial using "setenv stdout serial". You can switch error console(stderr) as well, using similar commands. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: Make all display related code dependent on CONFIG_LCDAjay Kumar2013-01-11-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | u-boot compilation fails for smdk5250 when we deselect CONFIG_LCD from the main config file. Following error was observed: drivers/video/libvideo.o: In function `exynos_lcd_init': /home/ajay/u-boot-samsung/drivers/video/exynos_fb.c:68: undefined reference to `lcd_set_flush_dcache' This is because exynos video drivers have dependency on CONFIG_LCD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: Add support for FIMD and DPAjay Kumar2013-01-10-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add panel_info structure required by LCD driver and DP panel platdata for SMDK5250. Add GPIO configuration for LCD. Enable FIMD and DP support on SMDK5250. DP Panel size: 2560x1600. We use 16BPP resolution to get LCD console. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Acked-by: Simon Glass <sjg@chomium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT: Add compatible strings for PMICRajeshwari Shinde2013-01-10-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add required compatible information for PMIC Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT: Add compatible strings for USBRajeshwari Shinde2013-01-08-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add required compatible information for USB Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT: Add compatible strings for SPIRajeshwari Shinde2013-01-08-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add required compatible information for SPI driver. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | Sound: Add FDT support to driverRajeshwari Shinde2013-01-08-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | This patch adds FDT support to the sound driver. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | EXYNOS5: FDT: Add compatible strings for soundRajeshwari Shinde2013-01-08-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add required compatible information for sound driver. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | I2C: Driver changes for FDT supportRajeshwari Shinde2013-01-08-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Functions added to get the I2C bus number and reset I2C bus using FDT node. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | FDT: Add compatible string for I2CRajeshwari Shinde2013-01-08-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add required compatible information for I2C driver. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | spl:falcon:trats Update Trats default board configuration file to support ↵Łukasz Majewski2013-01-03-10/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FALCON MODE Support for a new command (defined at envs) - spl_export generates the ATAGS image necessary for fast boot. Afterwards, it is stored at ext4 partition. Generated image format: CRC [4B] SIZE [4B] PAYLOAD(ATAGS/DT) [SIZE] Remarks: - CRC is calculated only for PAYLOAD - SIZE is the size of PAYLOAD It is important to adjust ${splsize} when large image is generated. It is defined as hex, since ext4 related commands expect it. The ${spladdr} environment variable corresponds to CONFIG_SYS_SPL_ARGS_ADDR Additionally definitions for DFU have been refactored and support for EFI has been added as well. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | SMDK5250: config: Add configuration file for SMDK5250 boardHatim RV2012-12-26-0/+33
| | | | | | | | | | | | | | | | | | | | | | | | Add the configuration file for exynos5250 based SMDK5250 board. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | exynos5: config: Rename the smdk5250.h to exynos5250-dt.hHatim RV2012-12-26-2/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Create a common configuration file for all exynos5250 based boards. Going forward we will be using DT based driver discovery for all the boards based on Exynos5. The different boards added will have there own config.h files which internally will include this file and specify their specific DT files. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| * | fdt: exynos5: Add DT node definition for SROM and SMSC9215Hatim RV2012-12-26-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add the compatibility string and constant for the ethernet driver so the device tree parsing code can recognize it. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | arm: at91sam9x5: add dataflash boot supportBo Shen2013-01-12-0/+10
| | | | | | | | | | | | | | | | | | | | | Add dataflash boot support on at91sam9x5ek board Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Andreas Bießmann <andreas.devel@googlemail.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-01-11-11/+254
|\ \ \
generated by cgit v1.1 at 2024-11-13 19:22:35 +0000