summaryrefslogtreecommitdiff
path: root/include/linux/usb
Commit message (Collapse)AuthorAgeLines
* armv8: fsl-layerscape: Add support of QorIQ LS1012A SoCPrabhakar Kushwaha2016-06-03-1/+5
| | | | | | | | | | | | | | | | | | | | | The QorIQ LS1012A processor, optimized for battery-backed or USB-powered, integrates a single ARM Cortex-A53 core with a hardware packet forwarding engine and high-speed interfaces to deliver line-rate networking performance. This patch add support of LS1012A SoC along with - Update platform & DDR clock read logic as per SVR - Define MMDC controller register set. - Update LUT base address for PCIe - Avoid L3 platform cache compilation - Update USB address, errata - SerDes table - Added CSU IDs for SDHC2, SAI-1 to SAI-4 Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> Signed-off-by: Makarand Pawagi <makarand.pawagi@mindspeed.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: York Sun <york.sun@nxp.com>
* drivers: usb: common: add common code for usb drivers to useMugunthan V N2016-05-17-0/+9
| | | | | | | Add common usb code which usb drivers makes use of it. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Reviewed-by: Simon Glass <sjg@chromium.org>
* armv8: LS2080A: Consolidate LS2080A and LS2085AYork Sun2016-04-06-1/+1
| | | | | | | | | | | | LS2080A is the primary SoC, and LS2085A is a personality with AIOP and DPAA DDR. The RDB and QDS boards support both personality. By detecting the SVR at runtime, a single image per board can support both SoCs. It gives users flexibility to swtich SoC without the need to reprogram the board. Signed-off-by: York Sun <york.sun@nxp.com> CC: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
* Use correct spelling of "U-Boot"Bin Meng2016-02-06-2/+2
| | | | | | | | | | Correct spelling of "U-Boot" shall be used in all written text (documentation, comments in source files etc.). Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Heiko Schocher <hs@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Minkyu Kang <mk7.kang@samsung.com>
* usb: xhci: zynqmp: Removing unused function usb_phy_resetMarek Vasut2015-12-07-1/+0
| | | | | | | This patch removes unsued function usb_phy_reset, rather common function dwc3_phy_reset is used. Signed-off-by: Marek Vasut <marex@denx.de>
* armv8/ls1043ardb: add USB supportGong Qianyu2015-11-30-1/+8
| | | | | | | Add support for the third USB controller for LS1043A. Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* armv8: ls2085a: Add support of LS2085A SoCPrabhakar Kushwaha2015-11-30-1/+1
| | | | | | | | | | | | | Freescale's LS2085A is a another personality of LS2080A SoC with support of AIOP and DP-DDR. This Patch adds support of LS2085A Personality. Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Updated MAINTAINERS files Dropped #ifdef in cpu.h Add CONFIG_SYS_NS16550=y in defconfig] Reviewed-by: York Sun <yorksun@freescale.com>
* armv8: LS2080A: Rename LS2085A to reflect LS2080APrabhakar Kushwaha2015-11-30-3/+3
| | | | | | | | | | | LS2080A is a prime personality of Freescale’s LS2085A. It is a non-AIOP personality without support of DP-DDR, L2 switch, 1588, PCIe endpoint etc. So renaming existing LS2085A code base to reflect LS2080A (Prime personality) Signed-off-by: Pratiyush Mohan Srivastava <pratiyush.srivastava@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> [York Sun: Dropped #ifdef in cpu.c for cpu_type_list] Reviewed-by: York Sun <yorksun@freescale.com>
* usb: sandbox: Add a USB emulation driverSimon Glass2015-11-19-0/+20
| | | | | | | | | Add a simple USB keyboard driver for sandbox. It provides a function to 'load' it with input data, which it will then stream through to the normal U-Boot input subsystem. When the input data is exhausted, the keyboard stops providing data. Signed-off-by: Simon Glass <sjg@chromium.org>
* usb: gadget: at91_udc: add at91_udc into U-BootHeiko Schocher2015-09-11-0/+20
| | | | | | | add U-Boot specific changes to the at91_udc linux driver, so it works with U-Boot. Signed-off-by: Heiko Schocher <hs@denx.de>
* include: usb: Map USB controller base addresses for LS2085ANikhil Badola2015-07-22-0/+3
| | | | | | Map USB XHCI controller base addresses for LS2085A SOC Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
* include: usb: Move USB controller base address mappingNikhil Badola2015-07-22-0/+7
| | | | | | | | | Move USB controller Base address mapping from ls102xa immap to fsl xhci header. This is required to remove any warnings when controller base addresses are mapped for multiple platforms in their respective files. Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
* drivers: usb: fsl: Implement Erratum A-009116 for XHCI controllerNikhil Badola2015-07-22-6/+16
| | | | | | | This adjusts (micro)frame length to appropriate value thus avoiding USB devices to time out over a longer run Signed-off-by: Nikhil Badola <nikhil.badola@freescale.com>
* usb: fsl: Add XHCI driver supportRamneek Mehresh2015-07-22-0/+54
| | | | | | Add xhci driver support for all FSL socs Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
* usb: dwc3: Add DWC3 controller driver supportRamneek Mehresh2015-07-22-0/+6
| | | | | | Add support for DWC3 XHCI controller driver Signed-off-by: Ramneek Mehresh <ramneek.mehresh@freescale.com>
* dm: usb: Add a generic descriptor structSimon Glass2015-04-18-0/+5
| | | | | | | | This is useful for creating lists of descriptors, and is better than using void * for this purpose. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* dm: usb: Move struct usb_string to a common placeSimon Glass2015-04-18-13/+13
| | | | | | | | This is needed for sandbox USB device emulation, so move it to a place where it can be found by things other than gadgets. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marek Vasut <marex@denx.de>
* usb: modify usb_gadget_handle_interrupts to take controller indexKishon Vijay Abraham I2015-04-14-1/+1
| | | | | | | | | | | | | | Since we support multiple dwc3 controllers to be existent at the same time, in order to handle the interrupts of a particular dwc3 controller usb_gadget_handle_interrutps should take controller index as an argument. Hence the API of usb_gadget_handle_interrupts is modified to take controller index as an argument and made the corresponding changes to all the usb_gadget_handle_interrupts calls. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: dwc3-omap: make dwc3-omap build in ubootKishon Vijay Abraham I2015-04-14-0/+19
| | | | | | | | | | | *) Changed the included header files to that used in u-boot. *) Removed extcon_* APIs *) Removed regulator_* APIs *) Fixed other misc warnings *) Added dwc3-omap.h to include the definitions of UTMI modes. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* include: usb: composite: add USB_GADGET_DELAYED_STATUS to avoid compilation ↵Kishon Vijay Abraham I2015-04-14-0/+9
| | | | | | | | | | | | | | | | | | | | | error Added USB_GADGET_DELAYED_STATUS to avoid the following compilation error. error: ‘USB_GADGET_DELAYED_STATUS’ undeclared (first use in this function) while compiling dwc3/ep0.c While this is been added only to avoid compilation error, the complete fix should be something like the one added in linux kernel. The complete fix will be ported once we have the composite driver in u-boot look similar to the one in linux kernel. commit 1b9ba000177ee47bcc5b44c7c34e48e735f5f9b1 Author: Roger Quadros <roger.quadros@nokia.com> Date: Mon May 9 13:08:06 2011 +0300 usb: gadget: composite: Allow function drivers to pause control transfers Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: gadget: make dwc3 gadget build in ubootKishon Vijay Abraham I2015-04-14-0/+39
| | | | | | | | | | | | | Did a bunch of things to get dwc3/gadget.c compile in u-boot without build errors and warnings *) Changed the included header files to that used in u-boot. *) Used dma_alloc_coherent and dma_free_coherent APIs of u-boot *) removed sg support *) remove jiffies and used a simple while loop *) removed irq support and added a function to call these interrupt handler. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* usb: dwc3: fix dwc3 header filesKishon Vijay Abraham I2015-04-14-0/+20
| | | | | | | | | Changed the header files included in core.h and io.h to the u-boot header files so that these files can be included in other dwc3 source files and be compiled in uboot. Also added otg.h which has the defines for dr_mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* include: usb: modify gadget.h to include udc supportKishon Vijay Abraham I2015-04-14-0/+43
| | | | | | | | Made changes in gadget.h that is required after adding udc-core.c except changes that might break other platforms. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
* arm: omap: add support for am57xx devicesFelipe Balbi2014-12-04-0/+4
| | | | | | | | just add a few ifdefs around because this device is very similar to dra7xxx. Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-tiTom Rini2014-10-27-1/+7
|\
| * keystone: usb: add support of usb xhciWingMan Kwok2014-10-23-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Add support of usb xhci. xHCI controls all USB speeds of the Host mode, that is, the SS through the SS PHY, as well as the HS, FS, and LS through the USB2 PHY. xHCI replaces and supersedes all previous host HCIs (HS-only EHCI, FS/LS OHCI and UHCI), and is therefore not backwards compatible with any of them. The USB3SS’s USB Controller is fully compliant with xHC. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
* | musb: fix warning in include/linux/usb/musb.hIgor Grinberg2014-10-23-0/+2
|/ | | | | | | | | | Fix the following build warning by including linux/compat.h: include/linux/usb/musb.h:110: warning: 'struct device' declared inside parameter list include/linux/usb/musb.h:110: warning: its scope is only this definition or declaration, which is probably not what you want Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
* lib, linux: move linux specific defines to linux/compat.hHeiko Schocher2014-08-25-5/+1
| | | | | | | | | | | | | | | | - move linux specific defines from usb and video code into linux/compat.h - move common linux specific defines from include/ubi_uboot.h to linux/compat.h - add for new mtd/ubi/ubifs sync new needed linux specific defines to linux/compat.h Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marex@denx.de> Cc: Anatolij Gustschin <agust@denx.de> [trini: Add spin_lock_irqsave/spin_unlock_irqrestore dummies from usb/lin_gadet_compat.h] Signed-off-by: Tom Rini <trini@ti.com>
* usb: am437x: Add support for am437x xhci USB hostDan Murphy2013-10-20-0/+4
| | | | | | | | | Add the support for the am437x xhci usb host. The xHCI host on AM437 is connected to a usb2 phy so need to add support to enable those clocks. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* usb: dra7xx: Add support for dra7xx xhci USB hostDan Murphy2013-10-20-3/+9
| | | | | | | | | | | Add the support for the dra7xx xhci usb host. dra7xx does not contain an EHCI controller so the headers can be removed from the board file. The xHCI host on dra7xx is connected to a usb2 phy so need to add support to enable those clocks. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* usb: omap: Move the usb phy code to the usb/phy directoryDan Murphy2013-10-20-0/+6
| | | | | | | | | | | Moving the usb/phy code from xhci-omap to the usb/phy directory and moving the associated phy code over to the new file. Newer TI processors adding xHCI support will have different PHY configurations so therefore abstracting this code away will prevent messing around with the xhci-omap file itself. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* usb: omap: Move the xhci-omap header file to common locationDan Murphy2013-10-20-0/+124
| | | | | | | Moving the xhci-omap header to a more global location so that other code can reference this code. Signed-off-by: Dan Murphy <dmurphy@ti.com>
* USB: XHCI: Add xHCI host controller support for Exynos5Vivek Gautam2013-10-20-0/+188
| | | | | | | | | | | | | This adds driver layer for xHCI controller in Samsung's exynos5 soc. This interacts with xHCI host controller stack. Signed-off-by: Vikas C Sajjan <vikas.sajjan@samsung.com> Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Julius Werner <jwerner@chromium.org> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Dan Murphy <dmurphy@ti.com> Cc: Marek Vasut <marex@denx.de>
* usb:gadget:Remove redundant #includes for USB composite gadget and its functionsLukasz Majewski2013-09-24-0/+1
| | | | | | | | | | Only the <linux/usb/gadget.h> requires error.h include. Hence, several includes of error.h at USB gadget functions are not needed. Moreover unnecessary malloc.h includes were also removed. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Cc: Marek Vasut <marex@denx.de>
* USB: gadget: add atmel usba udc driverBo Shen2013-09-24-0/+26
| | | | | | | | | | | | | | | | | Add atmel usba udc driver support, porting from Linux kernel The original code in Linux Kernel information is as following commit e01ee9f509a927158f670408b41127d4166db1c7 Author: Jingoo Han <jg1.han@samsung.com> Date: Tue Jul 30 17:00:51 2013 +0900 usb: gadget: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Bo Shen <voice.shen@atmel.com>
* Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-13/+1
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* usb: fix unaligned access in device_qual()Heiko Schocher2013-06-30-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | while playing with dfu, I tapped in an unaligned access when doing on the host side a "lsusb -d [vendornr]: -v" I get on the board: GADGET DRIVER: usb_dnl_dfu data abort MAYBE you should read doc/README.arm-unaligned-accesses pc : [<8ff71db8>] lr : [<8ff75aec>] sp : 8ef40d18 ip : 00000005 fp : 00000000 r10: 00000000 r9 : 47401410 r8 : 8ef40f38 r7 : 8ef4aae8 r6 : 0000000a r5 : 8ef4ab28 r4 : 8ef4ab80 r3 : 0000000a r2 : 00000006 r1 : 00000006 r0 : 8ef4aae8 Flags: Nzcv IRQs off FIQs on Mode SVC_32 Resetting CPU ... reason is that in the "struct usb_composite_dev" the "struct usb_device_descriptor desc;" is on an odd address, and this struct gets accessed in drivers/usb/gadget/composite.c device_qual() Fix it, by align this var "struct desc" fix to an aligned address. Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Samuel Egli <samuel.egli@siemens.com>
* usb: Use get_unaligned() in usb_endpoint_maxp() for wMaxPacketSizeVivek Gautam2013-06-12-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Use unaligned access to fetch wMaxPacketSize in usb_endpoint_maxp() api. In its absence we see following data abort message: ============================================================== data abort MAYBE you should read doc/README.arm-unaligned-accesses pc : [<bf794e24>] lr : [<bf794e1c>] sp : bf37c7b0 ip : 0000002f fp : 00000000 r10: 00000000 r9 : 00000002 r8 : bf37fecc r7 : 00000001 r6 : bf7d8931 r5 : bf7d891c r4 : bf7d8800 r3 : bf7d65b0 r2 : 00000002 r1 : bf7d65b4 r0 : 00000027 Flags: nZCv IRQs off FIQs off Mode SVC_32 Resetting CPU ... resetting ... ============================================================== Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Ilya Yanok <ilya.yanok@cogentembedded.com> Cc: Marek Vasut <marex@denx.de>
* Consolidate bool typeYork Sun2013-04-01-3/+3
| | | | | | | | | | | | | 'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
* musb-new: port of Linux musb driverIlya Yanok2012-11-20-0/+162
| | | | | | | | | | | | | | | | | | | | Existing U-Boot musb driver has no support for the new gadget framework and also seems to have other limitations. As gadget framework is ported from Linux it seems pretty natural to port musb gadget driver as well. This driver supports both host and peripheral modes. This is not a replacement for current musb driver (at least now) as there are still some consumers of the old UDC interface. No DMA operation support included, CONFIG_MUSB_PIO_ONLY should be defined. Virtual root hub device is not implemented. Known problems: with no devices connected usb_lowlevel_start() fails. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* linux/usb/ch9.h: update with the version from Linux treeIlya Yanok2012-11-20-15/+499
| | | | Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
* usb:gadget:composite: Support for composite at gadget.hLukasz Majewski2012-05-20-0/+6
| | | | | | | | | Add device data pointer to the USB gadget's device struct. Wrapper for extracting usb_gadget from Linux's usb device Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* usb:gadget:composite USB composite gadget supportLukasz Majewski2012-05-20-0/+350
| | | | | | | | | | | | | | | | USB Composite gadget implementation for u-boot. It builds on top of USB UDC drivers. This commit is based on following files from Linux Kernel v2.6.36: ./include/linux/usb/composite.h ./drivers/usb/gadget/composite.c SHA1: d187abb9a83e6c6b6e9f2ca17962bdeafb4bc903 Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* usb:udc: Remove duplicated USB definitions from include/linux/usb/ch9.h fileLukasz Majewski2012-05-20-67/+0
| | | | | | | | | | | Remove the repeated USB descriptor code and use usbdescriptors.h file. ch9.h file has been copied from linux and is needed for USB gadget related work. Now usbdescriptors.h and ch9.h shall be used together. Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Vasut <marex@denx.de>
* USB: Add USB RNDIS gadget protocolVitaly Kuzmichev2011-02-19-1/+5
| | | | | | | Port USB gadget RNDIS protocol support from linux-2.6.26 (.27 gadget stack actually has composite drivers). Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* Coding Style cleanupWolfgang Denk2010-10-27-4/+0
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* USB-CDC: Fix coding style issuesVitaly Kuzmichev2010-09-20-77/+63
| | | | | | | | | | | | | | | | | Fixes most of checkpatch warnings and errors in USB gadget stack. The most frequently encountered problems are: 1) "(foo*)", "foo * bar", "foo* bar" 2) C99 // comments 3) No spaces before/after/around '?', ':', '=', '==', ',', '&', '(' 4) Spaces before '[' 5) Spaces between function names and '(' 6) Block braces in wrong places 7) Spaces before tabs 8) Macros with complex values not enclosed in parenthesis 9) Multiline comments start just after /* Signed-off-by: Vitaly Kuzmichev <vkuzmichev@mvista.com>
* Integrate USB gadget layer and USB CDC driver layerRemy Bohmer2010-09-20-0/+1682
Derived from Linux kernel 2.6.27 Signed-off-by: Thomas Smits <ts.smits@gmail.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
generated by cgit v1.1 at 2024-11-06 13:40:35 +0000