summaryrefslogtreecommitdiff
path: root/include/linux/mtd/nand.h
Commit message (Collapse)AuthorAgeLines
* NAND: Update to support 64 bit device sizeSandeep Paulraj2009-11-13-1/+1
| | | | | | | | This patch adds support for NANDs greater than 2 GB. Patch is based on the MTD NAND driver in the kernel. Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* MTD:NAND: ADD new ECC mode NAND_ECC_HW_OOB_FIRSTSandeep Paulraj2009-08-26-0/+1
| | | | | | | | | | | | | | | | | This patch adds the new mode NAND_ECC_HW_OOB_FIRST in the nand code to support 4-bit ECC on TI DaVinci devices with large page (up to 2K) NAND chips. This ECC mode is similar to NAND_ECC_HW, with the exception of read_page API that first reads the OOB area, reads the data in chunks, feeds the ECC from OOB area to the ECC hw engine and perform any correction on the data as per the ECC status reported by the engine. This patch has been accepted by Andrew Morton and can be found at http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-new-ecc-mode-ecc_hw_oob_first.patch Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: ADD page Parameter to all read_page/read_page_raw API'sSandeep Paulraj2009-08-26-2/+2
| | | | | | | | | | | | | | | | This patch adds a new "page" parameter to all NAND read_page/read_page_raw APIs. The read_page API for the new mode ECC_HW_OOB_FIRST requires the page information to send the READOOB command and read the OOB area before the data area. This patch has been accepted by Andrew Morton and can be found at http://userweb.kernel.org/~akpm/mmotm/broken-out/mtd-nand-add-page-parameter-to-all-read_page-read_page_raw-apis.patch WE would like this to become part of the u-boot GIT as well Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com> Signed-off-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* nand: Change NAND_MAX_OOBSIZE to 218 as needed for some 4k page devicesStefan Roese2009-07-16-1/+1
| | | | | | | | | This is needed for the MPC512x NAND driver (fsl_nfc_nand.c) which already defines such a 4k plus 218 bytes ECC layout. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Scott Wood <scottwood@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: rename NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPSWolfgang Grandegger2009-01-23-9/+0
| | | | | | | | | | | | | | | | This patch renames NAND_MAX_CHIPS to CONFIG_SYS_NAND_MAX_CHIPS and changes the default from 8 to 1 for the legacy and the new MTD NAND layer. This allows to remove all NAND_MAX_CHIPS definitions in the board config files because none of the boards use multi chip support (NAND_MAX_CHIPS > 1) so far. The bamboo and the DU440 define #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE but that's bogus and did not work anyhow. Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: Allow NAND and OneNAND to coexistAlessandro Rubini2008-10-31-69/+1
| | | | | | | | | | This removes in nand.h code that is verbatim duplicated from bbm.h, including directly bbm.h in nand.h. The previous state of affairs prevented compiling code for a board hosting both NAND and OneNAND chips. Reported-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: sync with 2.6.27Scott Wood2008-10-29-3/+9
| | | | | | | | | | | | | This brings the core NAND code up to date with the Linux kernel. Since there were several drivers in Linux as of the last update that are not in u-boot, I'm not bringing over new drivers that have been added since in the absence of an interested party. I did not update OneNAND since it was recently synced by Kyungmin Park, and I'm not sure exactly what the common ancestor is. Signed-off-by: Scott Wood <scottwood@freescale.com>
* Fix OneNAND build breakKyungmin Park2008-08-13-15/+1
| | | | | | | | | Since page size field is changed from oobblock to writesize. But OneNAND is not updated. - fix bufferram management at erase operation This patch includes the NAND/OneNAND state filed too. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: Scan bad blocks lazily.Ilya Yanok2008-08-12-0/+2
| | | | | | | | | | Rather than scanning on boot, scan upon the first attempt to check the badness of a block. This speeds up boot when not using NAND, and reduces the likelihood of needing to reflash via JTAG if NAND becomes nonfunctional. Signed-off-by: Ilya Yanok <yanok@emcraft.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Fixing coding style issuesWilliam Juul2008-08-12-3/+4
| | | | | | | | | - Fixing leading white spaces - Fixing indentation where 4 spaces are used instead of tab - Removing C++ comments (//), wherever I introduced them Signed-off-by: William Juul <william.juul@tandberg.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Remove white space at end.William Juul2008-08-12-1/+1
| | | | | Signed-off-by: William Juul <william.juul@tandberg.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* Update MTD to that of Linux 2.6.22.1William Juul2008-08-12-144/+306
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A lot changed in the Linux MTD code, since it was last ported from Linux to U-Boot. This patch takes U-Boot NAND support to the level of Linux 2.6.22.1 and will enable support for very large NAND devices (4KB pages) and ease the compatibility between U-Boot and Linux filesystems. This patch is tested on two custom boards with PPC and ARM processors running YAFFS in U-Boot and Linux using gcc-4.1.2 cross compilers. MAKEALL ppc/arm has some issues: * DOC/OneNand/nand_spl is not building (I have not tried porting these parts, and since I do not have any HW and I am not familiar with this code/HW I think its best left to someone else.) Except for the issues mentioned above, I have ported all drivers necessary to run MAKEALL ppc/arm without errors and warnings. Many drivers were trivial to port, but some were not so trivial. The following drivers must be examined carefully and maybe rewritten to some degree: cpu/ppc4xx/ndfc.c cpu/arm926ejs/davinci/nand.c board/delta/nand.c board/zylonite/nand.c Signed-off-by: William Juul <william.juul@tandberg.com> Signed-off-by: Stig Olsen <stig.olsen@tandberg.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
* NAND: Provide a sane default for NAND_MAX_CHIPS.Scott Wood2008-05-28-0/+4
| | | | | | | This allows the header to be included regardless of whether a board's config file provides NAND-related defininitions. Signed-off-by: Scott Wood <scottwood@freescale.com>
* fix various commentsMarcel Ziswiler2008-01-09-1/+1
| | | | Signed-off-by: Marcel Ziswiler <marcel@ziswiler.com>
* [PATCH][NAND] Define the Vendor Id for Micron NAND FlashUlf Samuelsson2007-05-24-0/+1
| | | | | | Signed-off-by: Ulf Samuelsson <ulf@atmel.com> Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: Stefan Roese <sr@denx.de>
* Code cleanupWolfgang Denk2006-07-21-37/+37
|
* Minor code cleanupWolfgang Denk2006-03-06-1/+0
|
* Re-factoring the legacy NAND code (legacy NAND now only in board-specificBartlomiej Sieka2006-03-05-119/+385
| | | | | | | code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is implemented for these boards.
* Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling.Bartlomiej Sieka2006-02-24-1/+4
|\
| * Update of new NAND codeWolfgang Denk2005-09-14-22/+22
| | | | | | | | Patch by Ladislav Michl, 13 Sep 2005
| * Rewrite of NAND code based on what is in 2.6.12 Linux kernelWolfgang Denk2005-08-17-116/+387
|/ | | | Patch by Ladislav Michl, 29 Jun 2005
* Patches by Josef Wagner, 29 Oct 2004:wdenk2005-04-03-0/+2
| | | | | - Add support for MicroSys CPU87 board - Add support for MicroSys PM854 board
* * Patch by Gary Jennejohn, 11 Sep 2003:wdenk2003-09-11-1/+1
| | | | | | | | | | | - allow for longer timeouts for USB mass storage devices * Patch by Denis Peter, 11 Sep 2003: - fix USB data pointer assignment for bulk only transfer. - prevent to display erased directories in FAT filesystem. * Change output format for NAND flash - make it look like for other memory, too
* * Patch by Scott McNutt, 21 Jul 2003:wdenk2003-07-27-3/+3
| | | | | | | | | | | | | | | | | | | | Add support for LynuxWorks Kernel Downloadable Images (KDIs). Both LynxOS and BlueCat linux KDIs are supported. * Patch by Richard Woodruff, 25 Jul 2003: use more reliable reset for OMAP/925T * Patch by Nye Liu, 25 Jul 2003: fix typo in mpc8xx.h * Patch by Richard Woodruff, 24 Jul 2003: Fixes for cmd_nand.c: - Fixed null dereferece which could result in incorrect ECC values. - Added support for devices with no Ready/Busy signal hooked up. - Added OMAP1510 read/write protect handling. - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock for non-JFFS2. - Switched default ECC to be JFFS2.
* * Code cleanup:wdenk2003-06-27-4/+4
| | | | | | | | | - remove trailing white space, trailing empty lines, C++ comments, etc. - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) * Patches by Kenneth Johansson, 25 Jun 2003: - major rework of command structure (work done mostly by Michal Cendrowski and Joakim Kristiansen)
* * Patch by Marc Singer, 29 May 2003:wdenk2003-05-31-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixed rarp boot method for IA32 and other little-endian CPUs. * Patch by Marc Singer, 28 May 2003: Added port I/O commands. * Patch by Matthew McClintock, 28 May 2003 - cpu/mpc824x/start.S: fix relocation code when booting from RAM - minor patches for utx8245 * Patch by Daniel Engström, 28 May 2003: x86 update * Patch by Dave Ellis, 9 May 2003 + 27 May 2003: add nand flash support to SXNI855T configuration fix/extend nand flash support: - fix 'nand erase' command so does not erase bad blocks - fix 'nand write' command so does not write to bad blocks - fix nand_probe() so handles no flash detected properly - add doc/README.nand - add .jffs2 and .oob options to nand read/write - add 'nand bad' command to list bad blocks - add 'clean' option to 'nand erase' to write JFFS2 clean markers - make NAND read/write faster * Patch by Rune Torgersen, 23 May 2003: Update for MPC8266ADS board
* * Patch by Rick Bronson, 16 Mar 2003:wdenk2003-03-26-2/+113
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Atmel AT91RM9200DK w/NAND * Patches by Robert Schwebel, 19 Mar 2003: - use arm-linux-gcc as default compiler for ARM - fix i2c fixup code - fix missing baudrate setting - added $loadaddr / CFG_LOAD_ADDR support to loadb - moved "ignoring trailing characters" _before_ u-boot wants to print out diagnostics messages; removes bogus characters at the end of transmission * Patch by John Zhan, 18 Mar 2003: Add support for SinoVee Microsystems SC8xx boards * Patch by Rolf Offermanns, 21 Mar 2003: ported the dnp1110 related changes from the current armboot cvs to current u-boot cvs. smc91111 does not work. problem marked in smc91111.c, grep for "FIXME". * Patch by Brian Auld, 25 Mar 2003: Add support for STM flash chips on ebony board * Add PCI support for MPC8250 Boards (PM825 module) * Patch by Stefan Roese, 25 Mar 2003:
* Initial revisionwdenk2002-11-02-0/+87