summaryrefslogtreecommitdiff
path: root/include/fdtdec.h
Commit message (Collapse)AuthorAgeLines
...
* mmc: tegra: support Tegra124Stephen Warren2014-02-03-0/+1
| | | | | | | | | | | | | | | | | | | | | Tegra124's MMC controller is very similar to earlier SoC generations, and can be supported by the same driver. However, there are some non-backwards-compatible HW differences, and hence a new DT compatible value must be used to describe the HW. This patch updates the driver to support that new compatible value. That said, the HW differences are only relevant when enabling certain high-performance transfer modes. Since the driver is currently very simple and doesn't enable those modes, we don't actually need to address any of these HW differences in the code yet, hence the simple nature of this patch. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Pantelis Antoniou <panto@antoniou-consulting.com> Tested-by: Thierry Reding <treding@nvidia.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* exynos5: dts: Add COMPAT string data for USB 3.0 PHY and XHCIVivek Gautam2013-10-20-0/+2
| | | | | | | | | | | | | Adding required compatible string for xHCI host controller as well as USB 3.0 PHY to enable dt support for usb 3.0 on exynos5. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Cc: Julius Werner <jwerner@chromium.org> Cc: Simon Glass <sjg@chromium.org> Cc: Minkyu Kang <mk7.kang@samsung.com> Cc: Dan Murphy <dmurphy@ti.com> Cc: Marek Vasut <marex@denx.de>
* Merge branch 'master' of git://git.denx.de/u-boot-i2cTom Rini2013-07-24-0/+1
|\ | | | | | | | | | | | | | | | | | | | | The sandburst-specific i2c drivers have been deleted, conflict was just over the SPDX conversion. Conflicts: board/sandburst/common/ppc440gx_i2c.c board/sandburst/common/ppc440gx_i2c.h Signed-off-by: Tom Rini <trini@ti.com>
| * fdtdec: Add compatible string for High speed i2cnaveen krishna chatradhi2013-07-23-0/+1
| | | | | | | | | | | | | | Adds a new COMPAT string exynos5-hsi2c for high speed i2c controller available on exynos5 SoCs from Samsung. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
* | Add GPL-2.0+ SPDX-License-Identifier to source filesWolfgang Denk2013-07-24-17/+1
|/ | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-07-12-0/+3
|\ | | | | | | | | | | | | | | | | | | Fix a trivial conflict in arch/arm/dts/exynos5250.dtsi about gpio and serial. Conflicts: arch/arm/dts/exynos5250.dtsi Signed-off-by: Tom Rini <trini@ti.com>
| * ARM: Tegra: USB: EHCI: Add support for Tegra30/Tegra114Jim Lin2013-07-11-0/+2
| | | | | | | | | | | | | | | | | | | | Tegra30 and Tegra114 are compatible except PLL parameters. Tested on Tegra30 Cardhu, and Tegra114 Dalmore platforms. All works well. Signed-off-by: Jim Lin <jilin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
| * EXYNOS5: FDT: Add compatible strings for SerialRajeshwari Shinde2013-06-24-0/+1
| | | | | | | | | | | | | | | | Add required compatible information for s5p serial driver Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | cros: adds cros_ec keyboard driverHung-ying Tyan2013-06-26-0/+1
| | | | | | | | | | | | | | | | | | | | This patch adds the driver for keyboard that's controlled by ChromeOS EC. Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* | cros: add cros_ec driverHung-ying Tyan2013-06-26-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the cros_ec driver that implements the protocol for communicating with Google's ChromeOS embedded controller. Signed-off-by: Bernie Thompson <bhthompson@chromium.org> Signed-off-by: Bill Richardson <wfrichar@chromium.org> Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Gabe Black <gabeblack@chromium.org> Signed-off-by: Hung-ying Tyan <tyanh@chromium.org> Signed-off-by: Louis Yung-Chieh Lo <yjlou@chromium.org> Signed-off-by: Randall Spangler <rspangler@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-06-22-0/+1
|\ \ | |/
| * FDT: Add compatible string for DWMMCAmar2013-06-13-0/+1
| | | | | | | | | | | | | | | | | | Add required compatible information for DWMMC driver. Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Signed-off-by: Amar <amarendra.xt@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | tpm: Add support for new Infineon I2C TPM (SLB 9645 TT 1.2 I2C)Vincent Palatin2013-06-03-0/+1
|/ | | | | | | | | | | | | | | | | | Add support for Infineon's new SLB 9645 TT 1.2 I2C TPMs, which supports clockstretching, combined reads and a bus speed of up to 400khz. The device also has a new device id. This is based on the kernel patch provided by Infineon : https://gerrit.chromium.org/gerrit/42332 Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Luigi Semenzato <semenzato@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Vincent Palatin <vpalatin@chromium.org> Tested-by: Tom Wai-Hong Tam <waihong@chromium.org> Tested-by: Vincent Palatin <vpalatin@chromium.org>
* Merge branch 'master' of git://git.denx.de/u-boot-armTom Rini2013-04-15-0/+2
|\
| * Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-04-04-0/+2
| |\
| | * EXYNOS5: FDT: Add compatible strings for FIMDAjay Kumar2013-03-27-0/+1
| | | | | | | | | | | | | | | | | | | | | Add required compatible information for FIMD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * EXYNOS: FDT: Add compatible strings for FIMDAjay Kumar2013-03-27-0/+1
| | | | | | | | | | | | | | | | | | | | | Add required compatible information for FIMD. Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | tpm: Add Infineon slb9635_i2c TPM driverRong Chang2013-04-12-0/+1
|/ / | | | | | | | | | | | | | | | | Add a driver for the I2C TPM from Infineon. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Rong Chang <rongchang@chromium.org> Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
* | Merge branch 'u-boot/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-28-0/+3
|\ \ | |/ | | | | | | | | | | Conflicts: drivers/spi/tegra20_sflash.c include/fdtdec.h lib/fdtdec.c
| * Merge branch 'u-boot-tegra/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-26-0/+1
| |\
| | * tegra114: fdt: add compatible string for tegra114 SPI ctrlAllen Martin2013-03-25-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add "nvidia,tegra114-spi" to represent t114 SPI controller hardware. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
| * | Merge branch 'u-boot-samsung/master' into 'u-boot-arm/master'Albert ARIBAUD2013-03-26-0/+2
| |\ \ | | |/ | |/|
| | * Exynos5: FDT: Add TMU device node valuesAkshay Saraswat2013-03-12-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Fdt entry for Exynos TMU driver specific pre-defined values used for calibration of current temperature and defining threshold values. Signed-off-by: Akshay Saraswat <akshay.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
| | * EXYNOS5: FDT: Add compatible strings for MAX98095Rajeshwari Shinde2013-03-08-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add required compatible information for MAX98095 codec Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* | | sf: Enable FDT-based configuration and memory mappingSimon Glass2013-03-19-0/+1
| | | | | | | | | | | | | | | | | | | | | Enable device tree control of SPI flash, and use this to implement memory-mapped SPI flash, which is supported on Intel chips. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | fdt: Add fdtdec_get_addr_size() to read reg propertiesSimon Glass2013-03-19-0/+15
|/ / | | | | | | | | | | | | | | It is common to have a "reg = <address size>" property in the FDT. Add a function to handle this, similar to the existing fdtdec_get_addr(); Signed-off-by: Simon Glass <sjg@chromium.org>
* | Tegra30: mmc: Add Tegra30 SDMMC compatible entry to fdtdec & driverTom Warren2013-03-14-1/+2
| | | | | | | | | | | | | | | | | | Tegra30 SD/MMC controller differs enough from Tegra20 that it needs its own entry in the compat_names/compat_id tables and in the Tegra MMC driver. Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | Tegra: MMC: Add DT support to MMC driver for all T20 boardsTom Warren2013-03-14-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | tegra_mmc_init() now parses the DT info for bus width, WP/CD GPIOs, etc. Tested on Seaboard, fully functional. Tamonten boards (medcom-wide, plutux, and tec) use a different/new dtsi file w/common settings. Signed-off-by: Tom Warren <twarren@nvidia.com> Signed-off-by: Thierry Reding <thierry.reding@avionic-design.de> Reviewed-by: Stephen Warren <swarren@nvidia.com>
* | Tegra: I2C: Add T114 clock support to tegra_i2c driverTom Warren2013-03-14-0/+1
|/ | | | | | | | | | | | | T114 has a slightly different I2C clock, with a new (extra) divisor in standard/fast mode and HS mode. Tested on my Dalmore, and the I2C clock is 100KHz +/- 3Hz on my Saleae Logic analyzer. Added a new entry in compat_names for T114 I2C since it differs from the previous Tegra SoCs. A flag is set when T114 I2C HW is found so new features like the extra clock divisor can be used. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
* tegra: add SPI SLINK driverAllen Martin2013-02-11-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add driver for tegra SPI "SLINK" style driver. This controller is similar to the tegra20 SPI "SFLASH" controller. The difference is that the SLINK controller is a genernal purpose SPI controller and the SFLASH controller is special purpose and can only talk to FLASH devices. In addition there are potentially many instances of an SLINK controller on tegra and only a single instance of SFLASH. Tegra20 is currently ths only version of tegra that instantiates an SFLASH controller. This driver supports basic PIO mode of operation and is configurable (CONFIG_OF_CONTROL) to be driven off devicetree bindings. Up to 4 devices per controller may be attached, although typically only a single chip select line is exposed from tegra per controller so in reality this is usually limited to 1. To enable this driver, use CONFIG_TEGRA_SLINK Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* tegra: spi: add fdt support to tegra SPI SFLASH driverAllen Martin2013-02-11-0/+1
| | | | | | | | | Add support for configuring tegra SPI driver from devicetree. Support is keyed off CONFIG_OF_CONTROL. Add entry in seaboard dts file for spi controller to describe seaboard spi. Signed-off-by: Allen Martin <amartin@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com>
* EXYNOS5: FDT: Add compatible strings for PMICRajeshwari Shinde2013-01-10-0/+1
| | | | | | | | Add required compatible information for PMIC Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS5: FDT: Add compatible strings for USBRajeshwari Shinde2013-01-08-0/+2
| | | | | | | | Add required compatible information for USB Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS5: FDT: Add compatible strings for SPIRajeshwari Shinde2013-01-08-0/+1
| | | | | | | | Add required compatible information for SPI driver. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* EXYNOS5: FDT: Add compatible strings for soundRajeshwari Shinde2013-01-08-0/+2
| | | | | | | | Add required compatible information for sound driver. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* FDT: Add compatible string for I2CRajeshwari Shinde2013-01-08-0/+1
| | | | | | | | | Add required compatible information for I2C driver. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Acked-by: Heiko Schocher <hs@denx.de> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* fdt: exynos5: Add DT node definition for SROM and SMSC9215Hatim RV2012-12-26-0/+2
| | | | | | | | | Add the compatibility string and constant for the ethernet driver so the device tree parsing code can recognize it. Signed-off-by: Hatim Ali <hatim.rv@samsung.com> Acked-by: Simon Glass <sjg@chromium.org> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
* Merge branch 'master' of git://git.denx.de/u-boot into resolveMinkyu Kang2012-12-10-0/+112
|\ | | | | | | | | | | | | | | | | | | | | Conflicts: README board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h
| * fdt: Add polarity-aware gpio functions to fdtdecSean Paul2012-11-12-0/+16
| | | | | | | | | | | | | | | | Add get and set gpio functions to fdtdec that take into account the polarity field in fdtdec_gpio_state.flags. Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * fdt: Add fdtdec_get_uint64 to decode a 64-bit value from a propertyChe-Liang Chiou2012-11-12-0/+15
| | | | | | | | | | | | | | | | It decodes a 64-bit value from a property that is at least 8 bytes long. Signed-off-by: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * fdt: Add function to read boolean propertyGabe Black2012-11-12-0/+10
| | | | | | | | | | | | | | | | Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Commit-Ready: Vincent Palatin <vpalatin@chromium.org> Commit-Ready: Gabe Black <gabeblack@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * fdt: Export fdtdec_lookup() and fix the nameGerald Van Baren2012-11-12-0/+13
| | | | | | | | | | | | | | The name of this function is not consistent, so fix it, and export the function for external use. Signed-off-by: Simon Glass <sjg@chromium.org>
| * fdt: Add function for decoding multiple gpios globally availableAbhilash Kesavan2012-11-12-0/+16
| | | | | | | | | | | | | | | | | | | | Samsung's SDHCI bindings require multiple gpios to be parsed and configured at a time. Export the already available fdtdec_decode_gpios for this purpose. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Commit-Ready: Che-Liang Chiou <clchiou@chromium.org> Signed-off-by: Simon Glass <sjg@chromium.org>
| * fdt: Add fdtdec_decode_region() to decode memory regionSimon Glass2012-11-12-0/+19
| | | | | | | | | | | | | | | | A memory region has a start and a size and is often specified in a node by a 'reg' property. Add a function to decode this information from the fdt. Signed-off-by: Simon Glass <sjg@chromium.org>
| * fdt: Add function to get a config string from device treeSimon Glass2012-11-12-0/+10
| | | | | | | | | | | | | | Add a function to look up a configuration string such as board name and returns its value. We look in the "/config" node for this. Signed-off-by: Simon Glass <sjg@chromium.org>
| * fdt: Add function to get config int from device treeAbhilash Kesavan2012-11-12-0/+13
| | | | | | | | | | | | | | | | | | | | | | Add a function to look up a configuration item such as machine id and return its value. Note: The code has been taken as is from the Chromium u-boot development tree and needs Simon Glass' sign-off. Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Simon Glass <sjg@chromium.org>
* | tegra: Add SOC support for display/lcdWei Ni2012-11-19-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the LCD peripheral at the Tegra2 SOC level. A separate LCD driver will use this functionality to configure the display. Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com> Mayuresh Kulkarni: - changes to remove bitfields and clean up for submission Signed-off-by: Simon Glass <sjg@chromium.org> Simon Glass: - simplify code, move clock control into here, clean-up Signed-off-by: Tom Warren <twarren@nvidia.com>
* | tegra: Add support for PWMSimon Glass2012-11-19-0/+1
|/ | | | | | | | The pulse width/frequency modulation peripheral supports generating a repeating pulse. It is useful for controlling LCD brightness. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com>
* Merge branch 'agust@denx.de' of git://git.denx.de/u-boot-stagingTom Rini2012-09-21-0/+3
|\
| * fdt: Add header guard to fdtdec.hSimon Glass2012-09-21-0/+3
| | | | | | | | | | | | | | This makes it easier to include this header from other headers. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>