summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
...
| * | | imx: ventana: config: enable edid supportTim Harvey2015-04-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable the 'i2c edid' command to query and display data from an attached HDMI monitor of LVDS display with an EDID device. Example: Ventana > i2c dev 2 && i2c edid 0x50 Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: config: Support ramdiskTim Harvey2015-04-22-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Set the initrd_high env so that ramdisk range can be properly set. See commit 7e9603e and README Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: config: add USB Mass Storage (ums) supportTim Harvey2015-04-22-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for the USB mass storage gadget to enable access to on-board storage. Example: Ventana > ums 0 mmc 0 # provide ums access to the uSD Ventana > ums 0 usb 0 # provide ums access to the first USB device Ventana > ums 0 sata 0 # provide ums access to an mSATA device Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: assign default ethprime dynamicallyTim Harvey2015-04-22-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Gateworks Ventana boards don't all use IMX6 FEC, so lets define default ethprime based off the first detected device. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: add i210 supportTim Harvey2015-04-22-0/+1
| | | | | | | | | | | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | imx: ventana: disable 4k tftp/nfs packetsTim Harvey2015-04-22-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | I've encountered issues when using 4k packets through certain switches. For now disable this and go back to using MTU size packets. Signed-off-by: Tim Harvey <tharvey@gateworks.com>
| * | | mx6: Add initial SPL support for HummingBoard-i2eXFabio Estevam2015-04-22-0/+205
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the initial SPL support for HummingBoard-i2eX, which is based on a MX6 Dual. For more information about HummingBoard, please check: http://www.solid-run.com/products/hummingboard/ Based on the work from Jon Nettleton and Rabeeh Khoury. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriqTom Rini2015-04-24-121/+1000
|\ \ \ \
| * | | | ls2085a: esdhc: Add esdhc support for ls2085aYangbo Lu2015-04-23-4/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds esdhc support for ls2085a. Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | armv8/ls2085ardb: Enable NAND SPL supportScott Wood2015-04-23-5/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable NAND boot support using SPL framework. To boot from NAND, either use DIP switches on board, or "qixis_reset nand" command. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | armv8/ls2085aqds: NAND boot supportScott Wood2015-04-23-5/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds NAND boot support for LS2085AQDS, using SPL framework. Details of forming NAND image can be found in README. Signed-off-by: Scott Wood <scottwood@freescale.com> [York Sun: Remove +S from defconfig after commit 252ed872] Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | board/ls2085qds: Add support ethernetPrabhakar Kushwaha2015-04-23-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of ethernet: - eth.c: mapping lane to slot for (0x2A, 0x07) - ls2085a.c: To enable/disable dpmac and get link type Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | armv8/ls2085ardb: Add support of LS2085ARDB platformYork Sun2015-04-23-0/+266
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LS2085ARDB is a evaluation platform that supports LS2085A family SoCs. This patch add sbasic support for the platform. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
| * | | | armv8/ls2085aqds: Add support of LS2085AQDS platformYork Sun2015-04-23-7/+314
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The LS2085AQDS is an evaluatoin platform that supports the LS2085A family SoCs. This patch add basic support of the platform. Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com>
| * | | | drivers/fsl-mc: Changed MC firmware loading for new boot architectureJ. German Rivera2015-04-23-7/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changed MC firmware loading to comply with the new MC boot architecture. Flush D-cache hierarchy after loading MC images. Add environment variables "mcboottimeout" for MC boot timeout in milliseconds, "mcmemsize" for MC DRAM block size. Check MC boot status before calling flib functions. Signed-off-by: J. German Rivera <German.Rivera@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | armv8: Add SerDes framework for Layerscape ArchitectureMinghuan Lian2015-04-23-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support of SerDes framework for Layerscape Architecture. - Add support of 2 SerDes block - Add SerDes protocol parsing and detection - Create table of SerDes protocol supported by LS2085A Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | armv8/ls2085a: Fix generic timer clock sourceYork Sun2015-04-23-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The timer clock is system clock divided by 4, not fixed 12MHz. This is common to the SoC, not board specific. Primary core is fixed when u-boot still runs in board_f. Secondary cores are fixed by reading a variable set by u-boot. Signed-off-by: York Sun <yorksun@freescale.com> CC: Mark Rutland <mark.rutland@arm.com>
| * | | | armv8/ls2085a: Update common header filePrabhakar Kushwaha2015-04-23-109/+211
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ls2085a_common.h contains hard-coded information for NOR/NAND flash, I2C, DDR, etc. These are platform specific. Move them out of common header file and placed into respective board header files. Move TEXTBASE to 1MB offset to fit NOR flash with up to 1MB sector size. Enable command auto complete. Update prompt symbol. Set fdt_high to 0xa0000000 because Linux requires that the fdt be 8-byte aligned and below 512 MiB. Besides ensuring compliance with the 512 MiB limit, this avoids problems with the dtb being misaligned within the FIT image. Change the MC FW, MC DPL and Debug server NOR addresses in compliance with the NOR flash layouts for 128MB flash. Add PCIe macros. Enable "loadb" command. Disable debug server. Enable workaround for erratum A008511. Stop reset on panic for postmortem debugging. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com>
| * | | | driver/i2c/mxc: Enable I2C bus 3 and 4York Sun2015-04-23-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some SoCs have more than two I2C busses. Instead of adding ifdef to the driver, macros are put into board header file where CONFIG_SYS_I2C_MXC is defined. Signed-off-by: York Sun <yorksun@freescale.com> CC: Heiko Schocher <hs@denx.de>
| * | | | board/ls2085_common: Increase malloc lengthPrabhakar Kushwaha2015-04-23-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Increase malloc length for more than 2M. Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | armv8/fsl-lsch3: Add Freescale Debug Server driverBhupesh Sharma2015-04-21-5/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Debug Server driver is responsible for loading the Debug server FW on the Service Processor (Cortex-A5 core) on LS2085A like SoCs and then polling for the successful initialization of the same. TOP MEM HIDE is adjusted to ensure the space required by Debug Server FW is accounted for. MC uses the DDR area which is calculated as: MC DDR region start = Top of DDR - area reserved by Debug Server FW Signed-off-by: Bhupesh Sharma <bhupesh.sharma@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | | Add bootscript support to esbc_validate.gaurav rana2015-04-21-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Default environment will be used for secure boot flow which can't be edited or saved. 2. Command for secure boot is predefined in the default environment which will run on autoboot (and autoboot is the only option allowed in case of secure boot) and it looks like this: #define CONFIG_SECBOOT \ "setenv bs_hdraddr 0xe8e00000;" \ "esbc_validate $bs_hdraddr;" \ "source $img_addr;" \ "esbc_halt;" #endif 3. Boot Script can contain esbc_validate commands and bootm command. Uboot source command used in default secure boot command will run the bootscript. 4. Command esbc_halt added to ensure either bootm executes after validation of images or core should just spin. Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: Gaurav Rana <gaurav.rana@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | | | colibri_vf: Enable USB support for Colibri VybridSanchayan Maity2015-04-23-0/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable USB support on Toradex Colibri Vybrid Modules. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Marek Vasut <marex@denx.de>
* | | | | ARM: vf610: Initial integration for Colibri VF50/VF61Sanchayan Maity2015-04-23-0/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds initial support for Colibri VF50/VF61 based on Freescale Vybrid SoC. - CPU clocked at 396/500 MHz - DDR3 at 396MHz - for VF50, use PLL2 as memory clock (synchronous mode) - for VF61, use PLL1 as memory clock (asynchronous mode) - Console on UART0 (Colibri UART_A) - Ethernet on FEC1 - PLL5 based RMII clocking (E.g. No external crystal) - UART_A and UART_C I/O muxing - Boot from NAND by default Tested on Colibri VF50/VF61 booting using serial loader over UART. Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com> Acked-by: Stefan Agner <stefan@agner.ch>
* | | | | m68k: add architecture-specific u-boot.ldsangelo@sysam.it2015-04-23-0/+62
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add architecture-specific u-boot.lds and remove all board-specific u-boot.lds. All the .text customization that was board-specific have been moved inside the related include/configs, inside a LDS_BOARD_TEXT define. Signed-off-by: Angelo Dureghello <angelo@sysam.it>
* | | | | fastboot: ARM: OMAP5: Enable reboot-bootloaderDileep Katta2015-04-23-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Implemented fb_set_reboot_flag() for OMAP5 to set an environment variable 'dofastboot' when reboot-bootloader called. This environment variable will be checked in boot command and fastboot will be called if the variable is set. If the bootcmd env variable of OMAP5 common is overwritten with board-specific command, then these changes will not apply. This was originally intended for DRA7 platform, but now applies to all OMAP5. Ref: http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=19da2e436e9806259cf1f4988b9e046ab256bf2c Signed-off-by: Angela Stegmaier <angelabaker@ti.com> Signed-off-by: Dileep Katta <dileep.katta@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com> [trini: Make it check for !CONFIG_ENV_IS_NOWHERE as we can't saveenv() in that case] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | | | ARM: DRA7XX: Enable FastbootDileep Katta2015-04-23-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Fastboot is enable by default for DRA7XX - This is based on following patch modified accordingly http://git.omapzoom.org/?p=repo/u-boot.git;a=commit;h=b2e04f92b5d91c708b6fd6b79d2266966ac51f4b Signed-off-by: Angela Stegmaier <angelabaker@ti.com> Signed-off-by: Dileep Katta <dileep.katta@linaro.org> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | | davinci: add support for omapl138-lcdk boardPeter Howard2015-04-23-0/+330
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Peter Howard <phoward@gme.net.au> [trini: Add config file, update for ..._ether_addr() -> ..._ethaddr() rename] Signed-off-by: Tom Rini <trini@konsulko.com>
* | | | | ARM: integrator: move CONFIG_ARCH_CINTEGRATOR to KconfigMasahiro Yamada2015-04-23-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Linus Walleij <linus.walleij@linaro.org>
* | | | | ARM: integrator: abolish CONFIG_INTEGRATORMasahiro Yamada2015-04-23-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Switch to CONFIG_ARCH_INTEGRATOR defined by Kconfig. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Linus Walleij <linus.walleij@linaro.org>
* | | | | ARM: integrator: move board select into mach-integrator/KconfigMasahiro Yamada2015-04-23-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The board/SoC select menu in arch/arm/Kconfig is still cluttered. Add ARCH_INTEGRATOR into arch/arm/Kconfig and move the board select under arch/arm/mach-integrator. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Linus Walleij <linus.walleij@linaro.org>
* | | | | vexpress64: use DM for all vexpress64 boardsLinus Walleij2015-04-23-16/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit d8bafe1310487ba0e0785997726b4792072178d3 "ARMv8: enable DM in vexpress64 board" only enabled DM for the simulated vexpress64 board (FVP) with the hardcoded clock value for the simulated board, causing a console regression on the Juno board which was using a different clock setting. Fix this by enabling DM for all vexpress64 boards, defining the clock frequency per-board, deleting the static array of PL01x ports from the config file and relying solely on the port defined in the boardfile using platform data. Cc: David Feng <fenghua@phytium.com.cn> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | | | board/BuR/tseries: reactivate NAND-boardHannes Petermaier2015-04-23-17/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The NAND-version has been become a bit orphan. Now we need to reactivate it, so bring necessary things: - loading devicetree - switch control signal to correct pins - setup pinmux - default-environment up to date. Signed-off-by: Hannes Petermaier <oe5hpm@oevsv.at>
* | | | | stm32f4: Add support for stm32f429-discovery boardrev13@wp.pl2015-04-22-0/+106
|/ / / / | | | | | | | | | | | | | | | | Signed-off-by: Kamil Lulko <rev13@wp.pl> Reviewed-by: Tom Rini <trini@konsulko.com>
* | | | Merge branch 'master' of git://git.denx.de/u-boot-mpc85xxTom Rini2015-04-20-4/+28
|\ \ \ \ | |_|/ / |/| | |
| * | | powerpc/mpc8641hpcn: Move environment to avoid conflictScott Wood2015-04-20-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot on this board grew a long time ago past the 384 KiB that it reserves for the U-Boot image, before the environment. Thus, saveenv overwrites the U-Boot image and bricks the board. I tried to find out when U-Boot grew beyond this point, but there is a long stretch in the history where this board did not build -- and AFAICT when it did fit in 384 KiB, it was missing vital features such as fdt support. Turning off CONFIG_VIDEO was not enough to make it fit. Thus, I don't think we have any choice other than to move the environment. Signed-off-by: Scott Wood <scottwood@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | board/t2080rdb: enable CONFIG_PHY_AQUANTIAShengzhou Liu2015-04-20-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_PHY_AQ1202 is no longer needed, use CONFIG_PHY_AQUANTIA. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | powerpc/t2080rdb: update ddr to support 1866MT/sShengzhou Liu2015-04-20-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Support SODIMM D3XP12081XL10AA 1866MT/s on T2080RDB. Enable CONFIG_CMD_MEMTEST as well. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | T4240RDB: Enable CONFIG_SYS_CORTINA_FW_IN_NOR configChunhe Lan2015-04-20-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now cortina driver uses macro CONFIG_SYS_CORTINA_FW_IN_NOR to define that firmware of cortina driver is stored in the nor flash. Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | board/t208xrdb: VID supportYing Zhang2015-04-20-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The fuse status register provides the values from on-chip voltage ID efuses programmed at the factory. These values define the voltage requirements for the chip. u-boot reads FUSESR and translates the values into the appropriate commands to set the voltage output value of an external voltage regulator. Signed-off-by: Ying Zhang <b40530@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
| * | | qemu-ppce500: Add support for 64bit CCSR mapAlexander Graf2015-04-20-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | QEMU 2.3 changes the address layout of the CCSR map in the PV ppce500 machine to reside in higher address space. Unfortunately, this exposed a glitch in u-boot for ppce500: While providing a function to dynamically evaluate the CCSR region's position in physical address space, we never used it. Plus we forgot to support 64bit physical addresses. This patch fixes that mishap, making u-boot work fine with latest QEMU again. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Scott Wood <scottwood@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
* | | | sandbox: add config_distro_defaults and config_distro_bootcmdSjoerd Simons2015-04-19-8/+23
|/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Make the sandbox setup more generic/examplary by including config_distro_defaults.h and config_distro_bootcmd.h. Among other things this makes it easy to test whether images will boot though with the standard distro bootcmds by running e.g: u-boot -c 'host bind 0 myimage.img ; boot' By default there are 2 target host devices to emulate device with multiple storage devices (e.g. internal ("host 0") and external ("host 1") and verify that the prioritization and fallbacks do work correctly. Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk> Reviewed by: Simon Glass <sjg@chromium.org> Acked-by: Simon Glass <sjg@chromium.org>
* | | sandbox: exynos: Move CONFIG_SOUND_SANDBOX to KconfigSimon Glass2015-04-18-2/+0
| | | | | | | | | | | | | | | | | | Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | sandbox: exynos: Move CONFIG_SOUND_WM8994 to KconfigSimon Glass2015-04-18-5/+0
| | | | | | | | | | | | | | | | | | Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | sandbox: exynos: Move CONFIG_SOUND_MAX98095 to KconfigSimon Glass2015-04-18-1/+0
| | | | | | | | | | | | | | | | | | Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | sandbox: exynos: Move CONFIG_I2S_SAMSUNG to KconfigSimon Glass2015-04-18-1/+0
| | | | | | | | | | | | | | | | | | Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | sandbox: exynos: Move CONFIG_I2S to KconfigSimon Glass2015-04-18-1/+0
| | | | | | | | | | | | | | | | | | Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | sandbox: exynos: Move CONFIG_CMD_SOUND to KconfigSimon Glass2015-04-18-2/+0
| | | | | | | | | | | | | | | | | | Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | sandbox: exynos: Move CONFIG_SOUND to KconfigSimon Glass2015-04-18-2/+0
| | | | | | | | | | | | | | | | | | Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
* | | sandbox: Move CONFIG_TPM_TIS_SANDBOX to KconfigSimon Glass2015-04-18-4/+0
| | | | | | | | | | | | | | | | | | Move this over to Kconfig and tidy up. Signed-off-by: Simon Glass <sjg@chromium.org>
generated by cgit v1.1 at 2024-09-19 18:38:28 +0000