summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* 85xx: Add pci/pcie E1000 ethernet support for MPC8544DS and MPC8536 boardsRoy Zang2009-07-22-0/+2
| | | | | Signed-off-by: Roy Zang <tie-fei.zang@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Report which "bank" of NOR flash we are booting from on FSL boardsKumar Gala2009-07-22-0/+19
| | | | | | | | | | | | | | The p2020DS, MPC8536DS, MPC8572DS, MPC8544DS boards are capable of swizzling the upper address bits of the NOR flash we boot out of which creates the concept of "virtual" banks. This is useful in that we can flash a test of image of u-boot and reset to one of the virtual banks while still maintaining a working image in "bank 0". The PIXIS FPGA exposes registers on LBC which we can use to determine which "bank" we are booting out of (as well as setting which bank to boot out of). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 86xx: Report which "bank" of NOR flash we are booting from on MPC8641HPCNKumar Gala2009-07-22-0/+2
| | | | | | | | | | | | | | The MPC8641HPCN board is capable of swizzling the upper address bit of the NOR flash we boot out of which creates the concept of "virtual" banks. This is useful in that we can flash a test of image of u-boot and reset to one of the virtual banks while still maintaining a working image in "bank 0". The PIXIS FPGA exposes registers on LBC which we can use to determine which "bank" we are booting out of (as well as setting which bank to boot out of). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 85xx: Bump up the BOOTMAP to 16M on FSL 85xx boardsKumar Gala2009-07-21-22/+22
| | | | | | | | We have always mapped at least 16M in the kernel and we have seen cases with new kernel features that a kernel image needs more than 8M of memory. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
* 83xx, kmeter: fix compile errorHeiko Schocher2009-07-21-1/+0
| | | | | | | | | | CONFIG_SYS_MALLOC_LEN is defined in the board config, and the keymile-common.h, which collects common options used by all keymile-boards. This results in a compile error when compiling the kmeter1 board. So remove this define in the board config file. Signed-off-by: Heiko Schocher <hs@denx.de>
* powerpc: updates for the keymile boardsHeiko Schocher2009-07-21-18/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - CONFIG_SYS_MAX_I2C_BUS changed to 1 We use only one I2C hardwarecontroller on this boards, so change the CONFIG_SYS_MAX_I2C_BUS to 1. - common: dont print errormsg if second IVM Block lacks. - 82xx, mgcoge: fix double mtdpart entry in environment - 82xx, mgcoge: activate on second Flash the second bank. - common: CONFIG_ENV_SIZE 0x4000 for all keymile boards - common: Change malloc size to 1MByte for all Keymile boards We need a bigger malloc area for the environment support (128k) on some Keymile boards (kmeter1) and the upcoming UBI support. Change it to 1MB for all Keymile boards to be on the save side. Also define CONFIG_SYS_64BIT_VSPRINTF which is needed for UBI/UBIFS support. - Add UBI support to all Keymile boards - change manner of writing "/localbus/ranges" node instead of writting the complete "/localbus/ranges" node before booting Linux, only update the ranges entries which gets dynamical detected (size of flashes). This is needed, because keymile adds in the DTS "/localbus/ranges" node entries, which u-boot must not overwrite/delete. - kmeter, mgcoge: define 2 seperate regions needed for the Intel P30 chips The Intel P30 chip has 2 non-identical chips on one die, so we need to define 2 seperate regions that are scanned by physmap_of independantly. - kmeter1: Add MTD concat support to Keymile boards - 82xx, mgcoge: add "unlock=yes" to default environment - added CONFIG_MTD_DEVICE to get in sync with mainline code Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Stefan Roese <sr@denx.de>
* Remove last remanants of unused CONFIG_I2C_CMD_TREEPeter Tyser2009-07-20-4/+0
| | | | Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* Merge branch 'master' of git://git.denx.de/u-boot-blackfinWolfgang Denk2009-07-20-7/+5
|\
| * Blackfin: bf537-{minotaur,srv1}: do not hardcode CONFIG_ETHADDRMike Frysinger2009-07-18-6/+4
| | | | | | | | | | | | | | MAC addresses should not be hardcoded in boards to avoid random link level conflicts. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
| * Blackfin: bf533-stamp: back down SCLK a bitMike Frysinger2009-07-18-1/+1
| | | | | | | | | | | | | | | | | | While the 1.0 and 1.2 spin of the bf533-stamp boards can handle the higher SCLK speeds just fine, the 1.1 spin cannot due to the bugs introduced with the shortened SDRAM traces. So lower the SCLK speed down to a value that all three can handle. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
* | Merge branch 'master' of git://git.denx.de/u-boot-mpc83xxWolfgang Denk2009-07-20-34/+42
|\ \
| * | mpc83xx: convert all remaining boards over to 83XX_GENERIC_PCIKim Phillips2009-07-18-34/+42
| |/ | | | | | | Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* | digsy mtc: Enable command line history.Grzegorz Bernacki2009-07-19-0/+1
| | | | | | | | Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
* | Fix boards broken after removal of legacy NAND and DoC supportWolfgang Denk2009-07-19-4/+1
| | | | | | | | | | | | | | | | Commit 2419169f removed support for legacy NAND and disk on chip but missed to update the code for a few boards. This patch fixes the resulting build issues. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Canyonlands SATA harddisk driverKazuaki Ichinohe2009-07-19-0/+14
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds a SATA harddisk driver for the canyonlands. This patch is kernel driver's porting. This patch corresponded to not cmd_scsi but cmd_sata. This patch divided an unused member with ifndef __U_BOOT__ in the structure. [environment variable, boot script] setenv bootargs root=/dev/sda7 rw setenv bootargs ${bootargs} console=ttyS0,115200 ext2load sata 0:2 0x400000 /canyonlands/uImage ext2load sata 0:2 0x800000 /canyonlands/canyonlands.dtb fdt addr 0x800000 0x4000 bootm 0x400000 - 0x800000 If you drive SATA-2 disk on Canyonlands, you must change parts from PI2PCIE212 to PI2PCIE2212 on U25. We confirmed to boot by using following disks: 1.Vendor: Fujitsu Type: MHW2040BS 2.Vendor: Fujitsu Type: MHW2060BK 3.Vendor: HAGIWARA SYS-COM:HFD25S-032GT 4.Vendor: WesternDigital Type: WD3200BJKT (CONFIG_LBA48 required) 5.Vendor: WesternDigital Type: WD3200BEVT (CONFIG_LBA48 required) 6.Vendor: Hitachi Type: HTS543232L9A300 (CONFIG_LBA48 required) 7.Vendor: Seagate Type: ST31000333AS (CONFIG_LBA48 required) 8.Vendor: Transcend Type: TS32GSSD25S-M 9.Vendor: MTRON Type: MSD-SATA1525-016 Signed-off-by: Kazuaki Ichinohe <kazuichi at fsi.co.jp>
* Merge branch 'master' of git://git.denx.de/u-boot-nand-flashWolfgang Denk2009-07-19-863/+0
|\
| * Remove legacy NAND and disk on chip references from boards.Scott Wood2009-07-17-863/+0
| | | | | | | | Signed-off-by: Scott Wood <scottwood@freescale.com>
* | NAND: Part 2: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...Wolfgang Denk2009-07-18-1/+46
| | | | | | | | | | | | | | | | | | | | | | Commit 8d2effea added a warning for configurations that use NAND without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but failed to fix the affected boards. This patch covers the non-PPC boards that were missed in the previous patch (commit 170c1972). Signed-off-by: Wolfgang Denk <wd@denx.de>
* | at91cap9adk: fix #ifdef/#endif pairingWolfgang Denk2009-07-18-1/+1
| | | | | | | | | | | | The #ifdef/#endif pairing in this file was obviously messed up. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | MPC837XERDB: fix warning: "CONFIG_SYS_MONITOR_LEN" redefinedWolfgang Denk2009-07-18-1/+0
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | NAND: Fix warning Please define CONFIG_SYS_64BIT_VSPRINTF...Wolfgang Denk2009-07-18-2/+34
| | | | | | | | | | | | | | | | Commit 8d2effea added a warning for configurations that use NAND without defining the (then necessary) CONFIG_SYS_64BIT_VSPRINTF but failed to fix the affected boards. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | stdio/device: rework function naming conventionJean-Christophe PLAGNIOL-VILLARD2009-07-18-8/+8
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | So far the console API uses the following naming convention: ======Extract====== typedef struct device_t; int device_register (device_t * dev); int devices_init (void); int device_deregister(char *devname); struct list_head* device_get_list(void); device_t* device_get_by_name(char* name); device_t* device_clone(device_t *dev); ======= which is too generic and confusing. Instead of using device_XX and device_t we change this into stdio_XX and stdio_dev This will also allow to add later a generic device mechanism in order to have support for multiple devices and driver instances. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Edited commit message. Signed-off-by: Wolfgang Denk <wd@denx.de>
* mpc83xx: MPC8315ERDB: Use hwconfig for board type selectionAnton Vorontsov2009-07-16-0/+1
| | | | | | | This patch simply converts the board to the hwconfig infrastructure. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: MPC837XEMDS: Fixup eSDHC nodes in device treeAnton Vorontsov2009-07-16-0/+1
| | | | | | | | | | | fdt_fixup_esdhc() will either disable or enable eSDHC nodes, and also will fixup clock-frequency property. Plus, since DR USB and eSDHC are mutually exclusive, we should only configure the eSDHC if asked through hwconfig. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: MPC837XERDB: Add support for FSL eSDHCAnton Vorontsov2009-07-16-0/+17
| | | | | | | | | | | | | | | | | | This patch adds support for eSDHC on MPC837XERDB boards. The WP switch doesn't seem to work on RDB boards though, the WP pin is always asserted (can see the pin state when it's in GPIO mode). FSL DR USB and FSL eSDHC are mutually exclusive because of pins multiplexing, so user should specify 'esdhc' or 'dr_usb' options in the hwconfig environment variable to choose between the devices. p.s. Now we're very close to a monitor len limit (196 bytes left using gcc-4.2.0), so also increase the monitor len by one sector (64 KB). Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: increase MONITOR_LEN to offset growing painsKim Phillips2009-07-14-8/+8
| | | | | | | | Saving the environment leads to overwriting u-boot itself, bricking boards. Increase u-boot's image size so the environment base address doesn't end up overlapping u-boot text. Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* usb: mpx8349itx: added support of loading images from USB storage (MPH/DR)Valeriy Glushkov2009-07-14-2/+29
| | | | | Signed-off-by: Valeriy Glushkov <gvv@lstec.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
* mpc83xx: set 64BIT_VSPRINTF for boards using nand_utilKim Phillips2009-07-14-0/+4
| | | | | | | | | | | When enabling NAND support for a board, one must also define CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c for correct output. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Cc: Dave Liu <daveliu@freescale.com> Cc: Ron Madrid <ron_madrid@sbcglobal.net> Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
* mpc5121ads: add JFFS2 and MTDPARTS support; adjust flash mapWolfgang Denk2009-07-14-8/+38
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* aria: add JFFS2 and MTDPARTS support; adjust flash mapWolfgang Denk2009-07-14-5/+34
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* aria: enable NAND flash supportWolfgang Denk2009-07-14-1/+23
| | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* MPC512x: fix typo in comment listing the NAND driver nameWolfgang Denk2009-07-14-2/+2
| | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* mecp5123: cleanup - remove dead codeWolfgang Denk2009-07-14-7/+0
| | | | | | | | Remove dead code that was obviously a left-over from copy & paste. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* aria: adjust memory controller initializationWolfgang Denk2009-07-14-13/+72
| | | | | | Needed for Rev. 2 silicon at 400 MHz Signed-off-by: Wolfgang Denk <wd@denx.de>
* MPC512x: enabling NAND support requires CONFIG_SYS_64BIT_VSPRINTFWolfgang Denk2009-07-14-0/+4
| | | | | | | | | | When enabling NAND support for a board, one must also define CONFIG_SYS_64BIT_VSPRINTF because this is needed in nand_util.c for correct output. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefan Roese <sr@denx.de> Cc: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
* Merge branch 'master' of /home/wd/git/u-boot/masterWolfgang Denk2009-07-14-96/+456
|\
| * Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-13-18/+297
| |\
| | * Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2009-07-13-18/+297
| | |\
| | | * versatile: update config and merge to cfi flash driverJean-Christophe PLAGNIOL-VILLARD2009-07-12-15/+50
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Peter Pearse <peter.pearse@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com>
| | | * versatile: specify the board type on the promptJean-Christophe PLAGNIOL-VILLARD2009-07-12-2/+10
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Peter Pearse <peter.pearse@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com>
| | | * at91: Introduction of at91sam9g10 SOC.Sedji Gaouaou2009-07-12-1/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | AT91sam9g10 is an ARM 926ej-s SOC. It is an evolution of the at91sam9261 with a faster clock speed: 266/133MHz. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
| | | * at91: Introduction of at91sam9g45 SOC.Sedji Gaouaou2009-07-12-0/+225
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | AT91sam9g45 series is an ARM 926ej-s SOC family clocked at 400/133MHz. It embeds USB high speed host and device, LCD, DDR2 RAM, and a full set of peripherals. The first board that embeds at91sam9g45 chip is the AT91SAM9G45-EKES. On the board you can find 2 USART, USB high speed, a 480*272 LG lcd, ethernet, gpio/joystick/buttons. Signed-off-by: Sedji Gaouaou <sedji.gaouaou@atmel.com>
| * | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-13-20/+149
| |\ \ \ | | |/ /
| | * | Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2009-07-13-20/+149
| | |\ \
| | | * | sh: Update pci config for Renesas r7780mp boardNobuhiro Iwamatsu2009-07-11-0/+3
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | | * | sh: Add support ESPT-GIGA boradNobuhiro Iwamatsu2009-07-11-0/+126
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ESPT-Giga is SH7763-based reference board. Board support is relatively sparse, presently supporting serial, gigabit ethernet, USB host, and MTD. More information (in Japanese) available at: http://www.cente.jp/product/cente_hard/ESPT-Giga.html Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | | * | sh3/sh4: rename config option TMU_CLK_DIVIDER to CONFIG_SYS_TMU_CLK_DIVJean-Christophe PLAGNIOL-VILLARD2009-07-08-10/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| | | * | sh3/sh4: fix CONFIG_SYS_HZ to 1000Jean-Christophe PLAGNIOL-VILLARD2009-07-08-10/+10
| | | |/ | | | | | | | | | | | | | | | | | | | | Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2009-07-13-5/+9
| |\ \ \ | | |/ /
| | * | Blackfin: cm-bf561: add example settings for EXT-BF5xx-USB-ETH2 add-onHarald Krapfenbauer2009-07-10-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The cm-bf561 module can easily hook up to the EXT-BF5xx-USB-ETH2 extender board, so add a simple example of how to do that in the board config. Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
generated by cgit v1.1 at 2024-11-01 23:27:10 +0000