summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* tbs2910: add PRE_CONSOLE_BUFFER supportSoeren Moch2015-06-09-0/+4
| | | | | | Add PRE_CONSOLE_BUFFER support to display early boot messages over HDMI. Signed-off-by: Soeren Moch <smoch@web.de>
* tbs2910: add thermal supportSoeren Moch2015-06-09-0/+2
| | | | Signed-off-by: Soeren Moch <smoch@web.de>
* imx6: novena: Reinstate missing CONFIG_FAT_WRITEMarek Vasut2015-06-09-0/+1
| | | | | | | | | | Commit a380ce6e9698257c4e8be4c0711b09c90a8febff removed CONFIG_FAT_WRITE from novena.h , so Novena lost ability to write FAT partitions. Add this functionality back. Signed-off-by: Marek Vasut <marex at denx.de> Cc: Peter Robinson <pbrobinson at gmail.com> Cc: Stefano Babic <sbabic at denx.de>
* pepper: Implement Board Detection mechanismAdam YH Lee2015-06-08-0/+2
| | | | | | | | | | | | AM335x-based 'Gumstix Pepper' SBCs and variants use different types of RAM (DDR2 vs DDR3 with DDR3 being the default). Detect the board type by reading the factory-programmed EEPROM [1] and use this to select any runtime boot options such as RAM type. [1] http://elinux.org/BeagleBoardPinMux#List_of_Vendor_and_Device_IDs Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com> Signed-off-by: Ash Charles <ashcharles@gmail.com>
* autoboot.c: Move config options to KconfigStefan Roese2015-06-08-219/+2
| | | | | | | | | | | | | | | | | | | This patch moves the following config options to Kconfig: CONFIG_AUTOBOOT_KEYED CONFIG_AUTOBOOT_PROMPT CONFIG_AUTOBOOT_DELAY_STR CONFIG_AUTOBOOT_STOP_STR AUTOBOOT_KEYED_CTRLC Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> [trini: Drop ip04 and pm9263 configs/ additions, those boards previously set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over all boards that did change. Make digsy_mtc_* string include seconds to match others and not warn. ] Signed-off-by: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
* Merge branch 'master' of git://www.denx.de/git/u-boot-imxTom Rini2015-06-08-18/+43
|\
| * colibri-vf: Enable SPI supportBhuvanchandra DV2015-06-08-0/+7
| | | | | | | | | | Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Stefan Agner <stefan@agner.ch>
| * colibri_vf: Enable GPIO supportBhuvanchandra DV2015-06-08-0/+5
| | | | | | | | | | Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
| * mx6_common: Fix LOADADDR and SYS_TEXT_BASE for MX6SL and MX6SXFabio Estevam2015-06-08-8/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 8183058188cd2d942 ("imx6: centralise common boot options in mx6_common.h") broke boot on mx6sl and mx6sx by assuming that all mx6 SoCs use the same LOADADDR/SYS_TEXT_BASE range, which is not correct. DDR on mx6sx/mx6sl starts at 0x80000000. Adjust LOADADDR/SYS_TEXT_BASE to the proper values for mx6sx/mx6sl, so that these SoCs can boot again. Also, TQMA6 requires a custom CONFIG_SYS_TEXT_BASE value, so move its setting prior to the inclusion of mx6_common.h. Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
| * wandboard: Add board revision detection supportFabio Estevam2015-06-08-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | There are two revisions of wandboard: version B1 and C1. Add the revision detection support, so that the correct dtb file can be automatically loaded. Based on the patch from Richard Hu <hakahu@gmail.com>. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Stefano Babic <sbabic@denx.de> Tested-By: Vagrant Cascadian <vagrant@aikidev.net>
| * arm: mx6: tqma6: use default CONFIG_SYS_PBSIZEMarkus Niebel2015-06-01-4/+0
| | | | | | | | | | | | | | | | | | this removes a config entry and uses the default value defined in config_fallbacks.h. This implements the same behaviour as a patch series for other i.MX6 boards from Freescale Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * arm: mx6: tqma6: fix spelling error in conditionMarkus Niebel2015-06-01-2/+2
| | | | | | | | Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
| * warp: Add fuse command supportFabio Estevam2015-05-28-0/+4
| | | | | | | | | | | | Select the fuse command support. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * warp: Enable CONFIG_SUPPORT_EMMC_BOOTFabio Estevam2015-05-28-0/+1
| | | | | | | | | | | | | | CONFIG_SUPPORT_EMMC_BOOT is important to enable the boot partition via 'mmc partconf 0 1 1 0' command, for example. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * warp: Fix CONFIG_SYS_FSL_ESDHC_ADDRFabio Estevam2015-05-28-1/+1
| | | | | | | | | | | | | | Warp uses eMMC connected to esdhc2 port, so fix CONFIG_SYS_FSL_ESDHC_ADDR to reflect that. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
| * warp: Adjust CONFIG_SYS_DFU_DATA_BUF_SIZEFabio Estevam2015-05-28-1/+1
| | | | | | | | | | | | | | | | | | Adjust CONFIG_SYS_DFU_DATA_BUF_SIZE in order to avoid the following error when running the dfu command: => dfu 0 mmc 0 dfu_get_buf: Could not memalign 0x2000000 bytes Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
* | x86: minnowmax: initialize the pin-muxing from device treeGabriel Huau2015-06-04-0/+1
| | | | | | | | | | Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: qemu: Implement PIRQ routingBin Meng2015-06-04-0/+1
| | | | | | | | | | | | | | | | | | Support QEMU PIRQ routing via device tree on both i440fx and q35 platforms. With this commit, Linux booting on QEMU from U-Boot has working ATA/SATA, USB and ethernet. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: qemu: Make host bridge (b.d.f=0.0.0) visibleBin Meng2015-06-04-0/+2
| | | | | | | | | | | | | | | | | | | | The default weak version of pci_skip_dev() in drivers/pci/pci_common.c skips the host bridge (b.d.f = 0.0.0) which is actually the i440fx/q35 chipset for QEMU targets. Define CONFIG_PCI_CONFIG_HOST_BRIDGE to make it visible in the PCI configuration space. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: quark: Implement PIRQ routingBin Meng2015-06-04-0/+1
| | | | | | | | | | | | | | | | | | Intel Quark SoC has the same interrupt routing mechanism as the Queensbay platform, only the difference is that PCI devices' INTA/B/C/D are harcoded and cannot be changed freely. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: qemu: Add ATA/SATA supportBin Meng2015-06-04-1/+25
| | | | | | | | | | | | | | | | Enable legacy IDE support on the pc target and AHCI support on the q35 target. Default configuration is to support the pc target. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: Add CONFIG_LBA48 and remove CONFIG_ATAPI in x86-common.hBin Meng2015-06-04-4/+1
| | | | | | | | | | | | | | | | Enable CONFIG_LBA48 to support large disks. CONFIG_ATAPI is only needed by cmd_ide.c which is not common for modern x86 targets, hence remove it. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: qemu: Add graphics supportBin Meng2015-06-04-7/+3
| | | | | | | | | | | | | | | | It turns out that QEMU x86 emulated graphic card has a built-in option ROM which can be run perfectly with native mode by U-Boot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: Move FRAMEBUFFER_SET_VESA_MODE etc to video KconfigBin Meng2015-06-04-3/+0
| | | | | | | | | | | | | | | | | | | | CONFIG_FRAMEBUFFER_SET_VESA_MODE and CONFIG_FRAMEBUFFER_VESA_MODE are not x86-specific, so move them to drivers/video/Kconfig and make them depend on VIDEO_VESA driver. Some cosmetic fixes are applied to the Kconfig help text as well. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: Set CONFIG_NR_DRAM_BANKS to 8 and move it to x86-common.hBin Meng2015-06-04-9/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some x86 boards set CONFIG_NR_DRAM_BANKS to 1, which causes incorrect DRAM size printed when booting from coreboot, like this: CPU: x86, vendor Intel, device 663h DRAM: 636 KiB Using default environment Change it to 8 which should be enough for both coreboot and bare cases, and move it to x86-common.h. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org>
* | x86: Support QEMU x86 targetsBin Meng2015-06-04-0/+57
| | | | | | | | | | | | | | | | | | | | | | This commit introduces the initial U-Boot support for QEMU x86 targets. U-Boot can boot from coreboot as a payload, or directly without coreboot. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Merged in patch 'x86: qemu: Add CMD_NET to qemu-x86_defconfig https://patchwork.ozlabs.org/patch/479745/
* | board/BuR/common: fix netconsoleHannes Schmelzer2015-06-02-11/+7
| | | | | | | | | | | | | | | | | | | | netconsole had become defective over time and cleanups. Because the feature is used very rarely nobody did take notice about this defect. With this patch the resulting syntax error on call will be fixed. Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
* | configs: remove CONFIG_NET_MULTILars Poeschel2015-06-02-49/+0
| | | | | | | | | | | | | | | | | | CONFIG_NET_MULTI is not used anywhere and thus can safely be removed from the configs. Acked-by: Marek Vasut <marex@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
* | ARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQLars Poeschel2015-06-02-3/+0
| | | | | | | | | | | | | | | | The config for pcm051 still undef'd CONFIG_USE_IRQ. This is not needed any more since it is not defined in the whole include path before. Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
* | Merge branch 'master' of git://git.denx.de/u-boot-netTom Rini2015-06-02-324/+1
|\ \ | | | | | | | | | | | | | | | Fixup include/configs/unipher.h to not set CONFIG_LIB_RAND Signed-off-by: Tom Rini <trini@konsulko.com>
| * | net: Fix NET_RANDOM_ETHADDR dependenciesMichal Simek2015-06-01-18/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | NET_RANDOM_ETHADDR depends on lib/rand.c. This patch adds dependency to Kconfig to ensure that library is also compiled. Remove the definitions from Blackfin boards' include/configs. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
| * | net: Move the CMD_NET config to defconfigsJoe Hershberger2015-06-01-237/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This also selects CONFIG_NET for any CONFIG_CMD_NET board. Remove the imx default for CONFIG_NET. This moves the config that was defined by 60296a8 (commands: add more command entries in Kconfig). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
| * | Move setexpr to KconfigJoe Hershberger2015-06-01-67/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Another shell scripting command that has not been moved. Moved using tools/moveconfig.py using these settings: CMD_SETEXPR bool n y Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | sparc: fix build error on gr_ep2s60 boardMasahiro Yamada2015-06-01-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 92ac52082140 (net: Remove all references to CONFIG_ETHADDR and friends) accidentally dropped #endif. Since then, gr_ep2s60 could not build. scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config.h GEN include/autoconf.mk In file included from include/config.h:5:0, from ./include/common.h:18: include/configs/gr_ep2s60.h:15:0: error: unterminated #ifndef #ifndef __CONFIG_H__ ^ make[1]: *** [include/autoconf.mk] Error 1 Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-uniphierTom Rini2015-05-30-5/+3
|\ \ \
| * | | ARM: UniPhier: enable CONFIG_NET_RANDOM_ETHADDRMasahiro Yamada2015-05-31-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 92ac52082140 (net: Remove all references to CONFIG_ETHADDR and friends), the ethernet device on UniPhier boards is not working because of the incorrect (all-zero) MAC address. Enable CONFIG_NET_RANDOM_ETHADDR to generate the random one. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
| * | | ARM: UniPhier: move CONFIG_SYS_TEXT_BASE to KconfigMasahiro Yamada2015-05-31-5/+1
| |/ / | | | | | | | | | Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* | | Merge branch 'master' of http://git.denx.de/u-boot-sunxiTom Rini2015-05-30-27/+113
|\ \ \
| * | | ARM: sunxi: Enable PSCI for sun8iChen-Yu Tsai2015-05-29-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | sun8i uses the same PSCI backend as sun6i, without power clamps. Since there is no secure SRAM, the backend is placed at the end of DRAM. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | ARM: sunxi: Enable PSCI for sun6iChen-Yu Tsai2015-05-29-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we have a PSCI backend for sun6i, enable it. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | sunxi/nand: Add support to the SPL for loading u-boot from internal NAND memoryDaniel Kochmański2015-05-29-0/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support to the sunxi SPL to load u-boot from the internal NAND. Note this only adds support to access the boot partitions to load u-boot, full NAND support to load the kernel, etc. from the nand data partition will come later. Signed-off-by: Roy Spliet <r.spliet@ultimaker.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
| * | | sun9i: Basic sun9i (A80) supportHans de Goede2015-05-29-0/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add initial sun9i (A80) support, only uart + mmc are supported for now. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Update sunxi-common.h to deal with different A1-SRAM base addr on sun9iHans de Goede2015-05-29-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The A1 SRAM Base differs between sun9i and the others, update sunxi-common.h to deal with this, so that we do not set the initial stack pointer to point to the BROM. This avoids the need for the weird undocumented register write I previously took from the allwiner u-boot sources and which needed #ifdef-ery in start.S as it needed to be done really early on. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Update sunxi-common.h to deal with different DRAM base addr on sun9iHans de Goede2015-05-29-18/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DRAM Base differs between sun9i and the others, update sunxi-common.h to deal with this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
| * | | sunxi: Remove support for building "old-fashioned" fel binariesHans de Goede2015-05-29-9/+0
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | The latest versions of the fel tool support loading normal u-boot builds directly, and this is now the preferred way to use the fel boot method. This commit removes support for the old deprecated standalone fel builds. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
* | | cosmetic: change Author/MAINTAINER Name from Petermaier to SchmelzerHannes Schmelzer2015-05-28-3/+3
|/ / | | | | | | | | | | | | | | | | | | | | Since i've been married, i also have a new surname. Mr. Petermaier moved to Mr. Schmelzer. In this patch i update all files in which my (old) name is present. Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com> Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
* | ARM: bcm283x: Switch to generic timerMarek Vasut2015-05-28-0/+6
| | | | | | | | | | | | | | | | | | | | | | Switch to generic timer implementation from lib/time.c . This also fixes a signed overflow which was in __udelay() implementation. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Tyler Baker <tyler.baker@linaro.org> Acked-by: Stephen Warren <swarren@wwwdotorg.org>
* | vexpress64: use uncompressed kernel by defaultLinus Walleij2015-05-28-6/+6
| | | | | | | | | | | | | | | | The foundation model (FVP) emulator nominally boots using a clean, uncompressed kernel and the "booti" command. Augment the default U-Boot script to do this. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | vexpress64: let Juno wait for root deviceLinus Walleij2015-05-28-0/+1
| | | | | | | | | | | | | | | | The Juno reference design typically plugs the root FS on a USB stick. We need to wait a bit for the root to appear so tell this on the default command line. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | ppc: xilinx-ppc: Move to generic board supportRicardo Ribalda2015-05-28-0/+3
| | | | | | | | | | | | | | | | Generic board support seems to work just fine. Tested on ml507 with bitstream generated on the latest ISE software. Tested-by: Georg Schardt <schardt@team-ctech.de> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
generated by cgit v1.1 at 2024-11-07 11:22:11 +0000