summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* PXA: fix environment sector size, kernel and environment location for vpac270Mikhail Kshevetskiy2010-10-19-8/+17
| | | | | | | | | | Define ENV_ADDR as MONITOR_BASE + MONITOR_LEN. Fix environment sector size (NOR: 32Kb for first four sectors and 128Kb for other; OneNAND: 128Kb). Last but not least: we have MONITOR_LEN = 0x40000 and one sector for environment (size = 0x20000), so the kernel may start from 0x00060000 only. Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
* PXA: cleanup vpac270 config and set CONFIG_SYS_HZ to 1000Mikhail Kshevetskiy2010-10-19-2/+1
| | | | | | | | * CONFIG_SYS_CLKS_IN_HZ is not used anywhere, so removing it * CONFIG_SYS_HZ is set to 1000 on most architectures, so it seems to be the safe default Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@gmail.com>
* PXA: Balloon3 board supportMarek Vasut2010-10-19-0/+269
| | | | | | | | | The following hardware is currently supported: - UART - USB Host - FPGA Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Voipac270 improvementsMarek Vasut2010-10-19-45/+61
| | | | | | | | | | 128MB NOR module support. Define __io to get harddrive working. Fix saving of environment into OneNAND. Boot from harddrive when possible. Add missing MAINTAINERS entry. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Add initial Palm LifeDrive supportMarek Vasut2010-10-19-0/+273
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: Palm Tungsten|C SupportMarek Vasut2010-10-19-0/+245
| | | | | | | | | | | This patch adds support for the Palm Tungsten|C PXA255 board. The support includes: - LCD - MMC - UART - NOR Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* PXA: pxa-regs.h cleanupMarek Vasut2010-10-19-2/+2
| | | | Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
* Merge branch 'at91' of git://git.denx.de/u-boot-atmelWolfgang Denk2010-10-19-199/+87
|\
| * at91rm9200ek: enbable USB supportAndreas Bießmann2010-10-19-0/+15
| | | | | | | | | | | | | | This patch enables USB for at91rm9200ek board. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * at91rm9200ek: convert to at91Andreas Bießmann2010-10-19-201/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes some functionality from at91rm9200ek board but the remaining functionality does now work with newer at91 code and arm-relocation. Currently missing features are: - dataflash booting (due to missing HW for testing) - MMC/SD-Card - first stage bootloader support is completely removed (not needed for NOR) Cause this board was (some days ago) reference for all at91rm9200 based boards this should be a good starting point to convert all remaining at91rm9200 borads to at91 code. Aside from that this is a good base to get some drivers between at91sam/at91rm/avr32 merged. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com> Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
* | Merge branch 'elf_reloc'Wolfgang Denk2010-10-19-1/+6
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: arch/arm/include/asm/config.h board/LaCie/edminiv2/config.mk board/karo/tx25/config.mk board/logicpd/imx27lite/config.mk doc/README.arm-relocation Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | arm926ejs, tx25: add support for ELF relocationsHeiko Schocher2010-10-13-1/+1
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
| * | edminiv2: add support for ELF relocationsAlbert Aribaud2010-10-13-0/+5
| | | | | | | | | | | | Signed-off-by: Albert Aribaud <albert.aribaud@free.fr>
* | | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-19-22/+25
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: board/logicpd/imx31_litekit/config.mk boards.cfg Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | QONG: fix and update board config fileWolfgang Denk2010-10-19-18/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix flash memory map and other updates for QONG board: - adjust/fix "kernel_addr" settings - adjust/fix mtdparts NOR flash settings - add mtdparts NAND flash mapping - sort command list - enable "setexpr" command - enable ext2 support - delete bogus comment Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Stefano Babic <sbabic@denx.de>
| * | | i.MX31: Fix Litekit board to use new ARM relocation support.Magnus Lilja2010-10-19-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | Tested on hardware. Boots Linux nicely. Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
| * | | MX5: rename mx51 to mx5Jason Liu2010-10-18-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Rename mx51 to mx5 in order to support more mx51 like-style SOCs such as MX53 and the followings. Signed-off-by: Jason Liu <r64343@freescale.com>
* | | | ARM: enable device tree for beagleJohn Rigby2010-10-18-0/+9
| |_|/ |/| | | | | | | | | | | | | | | | | For testing ARM device tree support Signed-off-by: John Rigby <john.rigby@linaro.org> Acked-by: Wolfgang Denk <wd@denx.de>
* | | powerpc: Cleanup BOOTFLAG_* referencesPeter Tyser2010-10-18-2071/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that warm booting is not supported, there isn't a need for the BOOTFLAG_COLD and BOOTFLAG_WARM defines, so remove them. Note that this change makes the board info bd_bootflags field useless. It will always be set to 0, but we leave it around so that we don't break the board info structure that some OSes are expecting to be passed from U-Boot. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | MPC5121: Add USB EHCI supportDamien Dusha2010-10-18-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Francesco Rendine <francesco.rendine@valueteam.com> Signed-off-by: Damien Dusha <d.dusha@gmail.com> Signed-off-by: Anatolij Gustschin <agust@denx.de> Coding style cleanup; slight file restructuring. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Remy Bohmer <linux@bohmer.net>
* | | Makefile: move all Power Architecture boards into boards.cfgWolfgang Denk2010-10-18-39/+897
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clean up Makefile, and drop a lot of the config.mk files on the way. We now also automatically pick all boards that are listed in boards.cfg (and with all configurations), so we can drop the redundant entries from MAKEALL to avoid building these twice. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | Rename TEXT_BASE into CONFIG_SYS_TEXT_BASEWolfgang Denk2010-10-18-388/+388
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The change is currently needed to be able to remove the board configuration scripting from the top level Makefile and replace it by a simple, table driven script. Moving this configuration setting into the "CONFIG_*" name space is also desirable because it is needed if we ever should move forward to a Kconfig driven configuration system. Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | mkconfig: change CONFIG_MK_ prefix into plain CONFIG_Wolfgang Denk2010-10-18-45/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When planning for more generalization and Makefile cleanup it became obvious that the introduction of a separate CONFIG_MK_ name space for config options that were set through scripting in the Makefile was not a good idea. Originally the idea was to provide a script-free approach to supply configuration options - there was no real need for a separate name space. But when we now convert the existing Makefile entries to make use of this approach, it would mean that we have to touch a large number of board config files and add #ifdef / #define sequences to "convert" from the CONFIG_MK_ to the CONFIG_ name space. It seems much cleaner to get rid of this somewhat arbitrary _MK string now for the few boards that actually use it. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
* | | logodl: remove code for yet another corpseWolfgang Denk2010-10-18-299/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The logodl board has long been unmaintained and left broken. As obviously nobody is interestedin that code any more, we may as well remove it. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: August Hoeraendl <august.hoerandl@gmx.at> Cc: Robert Schwebel <r.schwebel@pengutronix.de> Cc: Marek Vasut <marek.vasut@gmail.com>
* | | schmoogie: fix build error due to removal of forceenv()Wolfgang Denk2010-10-18-0/+1
|/ / | | | | | | | | | | | | | | | | | | | | | | commit 6d014adf dropped support for the forceenv() function, but failed to remove references to it from board/davinci/schmoogie/schmoogie.c Replace forceenv() by setenv() and set CONFIG_ENV_OVERWRITE instead in the board config file to allow overwriting the serial number. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Sergey Kubushyn <ksi@koi8.net> Acked-by: Sergey Kubushyn <ksi@koi8.net>
* | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-17-51/+554
|\ \
| * | da850evm: fix linux bootparam addressBen Gardiner2010-10-17-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the LINUX_BOOT_PARAM_ADDR define to be based off of PHYS_SDRAM_1 instead of CONFIG_SYS_MEMTEST_START. On da830 they are the same thing but on da850 the CONFIG_SYS_MEMSTART define is offset from the PHYS_SDRAM_1 start. Without this patch it is not possible to boot linux on da850 -- bootm hangs at "Uncompressing Linux... done, booting the kernel." Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | da850evm: basic MII EMAC supportBen Gardiner2010-10-17-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current da850evm support in u-boot/master omits any use of the davinci EMAC. This patch adds basic support for the EMAC using the MII PHY found on the baseboard of the EVM. The MAC address is read from the environment variable 'ethadd'. Note that this is different from the da850evm support in the u-boot omapl1 tree where the MAC address is read from SPI flash. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> CC: Sandeep Paulraj <s-paulraj@ti.com> CC: Sudhakar Rajashekhara <sudhakar.raj@ti.com> CC: Ben Warren <biggerbadderben@gmail.com> CC: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | da850evm: add mtdpart and ubi commands with NAND supportBen Gardiner2010-10-17-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables also the mtdpart, ubi and ubifs commands when NAND support is enabled. Signed-off-by: Ben Gardiner<bengardiner@nanometrics.ca> To: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | da850evm: setup NAND support under CONFIG_USE_NANDBen Gardiner2010-10-17-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The current da850evm config is missing the pieces for NAND support that can be found in Sandeep's u-boot-davinci tree [1]. This patch adds NAND support in the spirit of the support in the u-boot-davinci tree where NAND support for the da850evm can be enabled by putting a single '#define CONFIG_USE_NAND' at the top of the include/configs/da850evm.h file. [1] http://arago-project.org/git/people/?p=sandeep/u-boot-davinci.git;a=tree Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | OMAP3: Add support for the OMAP3 IGEP module.Enric Balletbo i Serra2010-10-17-0/+215
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IGEP module is a low-power, high performance production-ready system-on-module (SOM) based on TI's OMAP3 family.The IGEP module solution based upon TI OMAP3 provides a low-power/low-cost platform for a variety of consumer/industrial/medical devices. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | OMAP3: Add support for the IGEP v2 board.Enric Balletbo i Serra2010-10-17-0/+228
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The IGEP v2 board is a low-cost, fan-less and industrial temperature range single board computer that unleashes laptop-like performance and expandability without the bulk, expense, or noise of typical desktop machines. Its architecture shares much in common with other OMAP3 boards. Signed-off-by: Enric Balletbo i Serra <eballetbo@gmail.com> Acked-by: Steve Sakoman <steve.sakoman@linaro.org> Tested-by: Steve Sakoman <steve.sakoman@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | ARMV7: OMAP4: Implement relocation for Panda and OMAP4430SDPSteve Sakoman2010-10-17-12/+6
| | | | | | | | | | | | | | | | | | | | | This patch fixes the build breakage introduced by the recent relocation changes for ARMV7 Signed-off-by: Steve Sakoman <steve@sakoman.com>
| * | ARMV7: OMAP3: Enable cache support on OveroSteve Sakoman2010-10-17-0/+1
| | | | | | | | | | | | Signed-off-by: Steve Sakoman <steve@sakoman.com>
| * | ARMV7: OMAP3: Implement relocation for OveroSteve Sakoman2010-10-17-0/+3
| | | | | | | | | | | | | | | | | | | | | This patch fixes the build breakage introduced by the recent relocation changes for ARMV7 Signed-off-by: Steve Sakoman <steve@sakoman.com>
| * | ARMV7: OMAP4: Enable saveenv to eMMC for SDP4430Sukumar Ghorai2010-10-17-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SDP4430 does not have onboard NAND, it has eMMC on the second MMC slot. This patch adds support for saving the u-boot environment to eMMC. Signed-off-by: Aneesh V <aneesh@ti.com> Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
| * | ARMV7: OMAP4: Use generic mmc driver on OveroSteve Sakoman2010-10-17-4/+6
| | | | | | | | | | | | | | | | | | This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Steve Sakoman <steve@sakoman.com>
| * | ARMV7: OMAP4: Use generic mmc driver on BeagleSteve Sakoman2010-10-17-4/+6
| | | | | | | | | | | | | | | | | | This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Steve Sakoman <steve@sakoman.com>
| * | ARMV7: OMAP4: Use generic mmc driver on SDP4430Sukumar Ghorai2010-10-17-5/+5
| | | | | | | | | | | | | | | | | | | | | This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
| * | ARMV7: OMAP4: Use generic mmc driver on PandaSukumar Ghorai2010-10-17-5/+4
| | | | | | | | | | | | | | | | | | | | | This patch switches from the legacy mmc driver to the new generic mmc driver Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Tested-by: Steve Sakoman <steve@sakoman.com>
| * | ARMV7: OMAP: Use default vendor/product ID for USB gadgetSteve Sakoman2010-10-17-15/+0
| | | | | | | | | | | | | | | | | | | | | TI hasn't reserved a USB Product ID for gadgets, so use the default vendor and product ID to avoid confusion. Signed-off-by: Steve Sakoman <steve@sakoman.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-10-17-1/+20
| |\ \
| | * | MX31: Add USB Host support to the QONG boardStefano Babic2010-10-13-1/+17
| | | | | | | | | | | | | | | | Signed-off-by: Stefano Babic <sbabic@denx.de>
| | * | MX31: Add support to update FPGA bitstreamStefano Babic2010-10-13-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch adds the possibility to update the QONG FPGA (a Lattice XP2-5E) with u-boot using some GPIOs to drive the JTAG interface. Signed-off-by: Stefano Babic <sbabic@denx.de>
* | | | ppc: Conditionally compile bat_rw.cPeter Tyser2010-10-13-0/+6
|/ / / | | | | | | | | | | | | | | | | | | Only a few PPC boards actually use the common BAT manipulation functions, so only compile it for them. Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
* | | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-10-13-557/+701
|\ \ \ | | |/ | |/|
| * | ARMV7: Versatile Express Coretile CortexA9x4 supportMatt Waddel2010-10-13-0/+196
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the ARM quad-core Cortex-A9 processor This system includes a motherboard(Versatile Express), daughterboard (Coretile), and SOC(Cortex-A9 quad core). The serial port, ethernet, and flash systems work with these additions. The naming convention is: SOC -> CortexA9 quad core = ca9x4 daughterboard -> Coretile = ct motherboard -> Versatile Express = vxp This gives ca9x4_ct_vxp.c as the board support file. Signed-off-by: Matt Waddel <matt.waddel@linaro.org>
| * | arch/arm/include/asm/sizes.h: cleanupsAndreas Bießmann2010-10-13-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | Merge several sizes.h in asm/arch subdirectories into a single asm/sizes.h file. Fixup usage of asm/arch/sizes.h in some files to use the merged file. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| * | ARM: relocation: don't undef CONFIG_SYS_ARM_WITHOUT_RELOCBen Gardiner2010-10-13-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | There were some #undef's of CONFIG_SYS_ARM_WITHOUT_RELOC added to a few board configs as part of the arm relocation series; but these are not needed now as we do not #undef what is not #defined in the first place. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> CC: Heiko Schocher <hs@denx.de>
| * | ARM: relocation: fix typo in commentHeiko Schocher2010-10-13-5/+5
| | | | | | | | | | | | Signed-off-by: Heiko Schocher <hs@denx.de>
generated by cgit v1.1 at 2024-11-09 19:02:23 +0000