summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* xilinx-ppc4xx-generic: Use common u-boot.ldsRicardo Ribalda Delgado2010-12-17-0/+1
| | | | | | | Use common ppc4xx linker script for xilinx ppc440 and ppc405 related boards. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: Update lwmon5 board supportStefan Roese2010-12-17-8/+14
| | | | | | | | | | | | | | This patch includes the following changes for the lwmon5 board support: - Enable cache in SDRAM - Use common EHCI driver instead of the PPC4xx specific OHCI driver This can be done since only high-speed devices are connected. - Remove cached TLB entry again after ECC setup - Use correct define for cache enabling (CONFIG_4xx_DCACHE instead of CONFIG_SYS_ENABLE_SDRAM_CACHE) - Enable FIT image support Signed-off-by: Stefan Roese <sr@denx.de>
* ppc4xx: t3corp: Add support for the Xilinx DS617 flash chipStefan Roese2010-12-17-6/+12
| | | | | | | | | | | | The t3corp board has an Xilinx DS617 flash chip connected to the onboard FPGA. This patch adds support for these chips. Board specific flash accessor functions are needed, since the chips can only be read correctly in 16bit mode. Additionally the FPGA chip-selects are configured for device-paced transfers (ready is enabled). Signed-off-by: Stefan Roese <sr@denx.de>
* Armada100: Add Board Support for Marvell Aspenite-DBPrafulla Wadaskar2010-12-16-0/+63
| | | | | | | | | | | | | | | | | | | | | | | | | | | Aspenite is a Development Board for ASPEN/ARMADA168(88AP168) with * Processor upto 1.2GHz * Parallel 1Gb x8 DDR2-1066 MHz * 16 Mb x16 NOR, 4Gb x8 SLC NAND, footprint for SPI NOR * Footprints for eMMC/eSD NAND & MMC x8 card * 4-in-1 card reader (xD, MMC/SD/MS Pro), CF True IDE socket * SEAF memory board, subset of PISMO2 With Peripherals: * 4.3” WVGA 24-bit LCD * Audio codecs (AC97 & I2S), TSI * VGA camera * Video in via 3 RCA jacks, and HDMI type C out * Marvell 88W8688 802.11bg/BT module * GPS RF IC * Dual analog mics & speakers, headset jack, LED, ambient light sensor * USB2.0 HS host (A), OTG (micro AB) * FE PHY, PCIE Mini Card slot * GPIO, GPIO expander with DIP switches for easier selection UART serial over USB, CIR This patch adds basic board support with DRAM and UART functionality The patch is tested for boot from DRAM using XDB Signed-off-by: Mahavir Jain <mjain@marvell.com> Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* mv-common.h: Add support for ARMADA100 PlatformsPrafulla Wadaskar2010-12-16-16/+50
| | | | | | | This patch adds commonly used macros for ARMADA100 based baords, Also some code reshuffled and updated for typos and comments Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
* Merge branch 'master' of ../master into nextWolfgang Denk2010-12-16-34/+434
|\
| * Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-12-16-0/+21
| |\
| | * pm9261: enable cache commandAsen Dimov2010-12-16-0/+1
| | | | | | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
| | * pm9261: ARM relocation supportAsen Dimov2010-12-16-0/+6
| | | | | | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
| | * pm9263: enable cache commandAsen Dimov2010-12-16-0/+1
| | | | | | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
| | * pm9263: ARM relocation supportAsen Dimov2010-12-16-0/+6
| | | | | | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
| | * pm9g45: enable cache commandAsen Dimov2010-12-16-0/+1
| | | | | | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
| | * pm9g45: ARM relocation supportAsen Dimov2010-12-16-0/+6
| | | | | | | | | | | | Signed-off-by: Asen Dimov <dimov@ronetix.at>
| * | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-12-14-8/+11
| |\ \ | | |/
| | * DaVinci DM6446: Config UpdateSandeep Paulraj2010-12-11-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The DM6446 does not build due to the ARM relocation patch. Also the board does not build in the NOR mode. Changed default to NAND to ensure no build failure. While at it removed CONFIG_CMD_KGDB Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | tsec: Revert to setting TBICR_ANEG_ENABLE by default for SGMIIKumar Gala2010-12-13-8/+20
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following commit: commit 46e91674fb4b6d06c6a4984c0b5ac7d9a16923f4 Author: Peter Tyser <ptyser@xes-inc.com> Date: Tue Nov 3 17:52:07 2009 -0600 tsec: Force TBI PHY to 1000Mbps full duplex in SGMII mode Removed setting Auto-Neg by default, however this is believed to be proper default configuration for initialization of the TBI interface. Instead we explicitly set CONFIG_TSEC_TBICR_SETTINGS for the XPedite5370 & XPedite5500 boards that use a Broadcomm PHY which require Auto-Neg to be disabled to function properly. This addresses a breakage on the P2020 DS & MPC8572 DS boards when used with an SGMII riser card. We also remove setting CONFIG_TSEC_TBICR_SETTINGS on the P1_P2_RDB family of boards as now the default setting is sufficient for them. Additionally, we clean up the code a bit to remove an unnecessary second define. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Peter Tyser <ptyser@xes-inc.com> Tested-by: Peter Tyser <ptyser@xes-inc.com>
| * Merge branch 'master' of git://git.denx.de/u-boot-imxWolfgang Denk2010-12-09-3/+4
| |\
| | * mx51evk: savenv or env save command does not workJason Liu2010-11-21-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | fix saveenv or env save command not work on mx51evk board. with this patch, we can use savenv or env save to store enviroments to mmc card slot 0 Signed-off-by: Jason Liu <r64343@freescale.com>
| * | Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-12-08-1/+331
| |\ \
| | * | arm920t/at91/timer: replace bss variables by gdAndreas Bießmann2010-12-07-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc bss values in arm920t/at91/timer driver. The usage of bss values in driver before initialisation of bss is forbidden. In that special case some data in .rel.dyn gets corrupted by the arm920t/at91/timer driver. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| | * | at91rm9200ek: add configure target for RAM bootAndreas Bießmann2010-12-07-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch also removes now unnecessary config.mk in board directory and make usage of new features in boards.cfg. Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| | * | at91rm9200ek: fix SDRAM initialistation valuesAndreas Bießmann2010-12-07-1/+1
| | | | | | | | | | | | | | | | Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
| | * | AT91: add TOP9000 supportReinhard Meyer2010-12-07-0/+314
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Adds support for the EMK TOP9000 CPU Module which is based on ATMELs ARM926EJS AT91SAM9XE SoC. Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
| * | | Merge branch 'master' of git://git.denx.de/u-boot-videoWolfgang Denk2010-12-06-1/+0
| |\ \ \
| | * | | mpc512x: aria: cleanup board config fileAnatolij Gustschin2010-12-01-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CONFIG_FSL_DIU_LOGO_BMP has been removed while refactoring MPC8610 and MPC5121 DIU code, so remove it. Signed-off-by: Anatolij Gustschin <agust@denx.de>
| * | | | powerpc/85xx: Enable HWCONFIG on MPC8572DSKumar Gala2010-12-01-0/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | We need HWCONFIG to allow configuration of DDR params Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2010-11-30-1/+36
| |\ \ \
| | * \ \ Merge branch 'master' of git://git.denx.de/u-boot-armWolfgang Denk2010-11-30-1/+36
| | |\ \ \ | | | |/ /
| | | * | Merge branch 'master' of git://git.denx.de/u-boot-samsungWolfgang Denk2010-11-30-0/+4
| | | |\ \
| | | | * | S5P: goni: fix for relocationMinkyu Kang2010-11-30-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| | | | * | S5P: smdkc100: fix for relocationMinkyu Kang2010-11-30-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
| | | * | | OMAP3: Zoom2: Fix ARM relocation supportDirk Behme2010-11-30-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | | * | | OMAP3: Zoom1: Fix ARM relocation supportDirk Behme2010-11-30-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | | * | | OMAP3: SDP3430: Fix ARM relocation supportDirk Behme2010-11-30-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | | * | | AM3517:Build FIX: undef CONFIG_CMD_NFS supportVaibhav Hiremath2010-11-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Without CONFIG_CMD_NET support CONFIG_CMD_NFS leads to linking error, so disable CONFIG_CMD_NFS option. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | | * | | AM3517:Fix for ARM Relocation supportVaibhav Hiremath2010-11-29-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also change the CONFIG_SYS_TEXT_BASE to 0x80008000, required with relocation support. This is the load address for primary boot loader (x-loader). Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | | * | | omap3evm: Use GENERATED_GBL_DATA_SIZESanjeev Premi2010-11-29-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The macro CONFIG_SYS_GBL_DATA_SIZE has been replaced with GENERATED_GBL_DATA_SIZE. Also define macros: CONFIG_SYS_INIT_RAM_ADDR and CONFIG_SYS_INIT_RAM_SIZE. Based on changes for omap3_beagle in the commit: 31bfcf1c5776df3d90286aa15104c45096d53dc6 Signed-off-by: Sanjeev Premi <premi@ti.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | | * | | ARMV7: OMAP3: Fix build failure for igep0030 machineEnric Balletbo i Serra2010-11-29-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Seems that if CONFIG_CMD_NET is undefined we should also undefine CONFIG_CMD_NFS, otherwise build fails with various undefined reference like: net/libnet.o: In function `rpc_req': u-boot/net/nfs.c:193: undefined reference to `NetEthHdrSize' u-boot/net/nfs.c:202: undefined reference to `NetSendUDPPacket' u-boot/net/nfs.c:203: undefined reference to `NetTxPacket' u-boot/net/nfs.c:203: undefined reference to `NetServerEther' This patch adds the undef CONFIG_CMD_NFS in configuration file. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| | | * | | OMAP4: SDP4430: Disable CMD_NFSDirk Behme2010-11-28-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes the SDB4430 build after commit 6d8962e814c15807dd6ac5757904be2a02d187b8 by explicitly disabling CMD_NFS. >From the commit message for "Switch from archive libraries to partial linking": This commit reveals board configurations that exclude some features but include source files that depend these disabled features in the build, resulting in undefined symbols. Known such cases include: - disabling CMD_NET but not CMD_NFS; - enabling CONFIG_OF_LIBFDT but not CONFIG_QE. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
| * | | | | powerpc/85xx: Introduce CONFIG_SYS_EXTRA_ENV_RELOCKumar Gala2010-11-30-5/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some systems need to relocate the env_addr pointer early because the location it points to will get invalidated before env_relocate is called. One example is on systems that might use a L2 or L3 cache in SRAM mode and initialize that cache from SRAM mode back to being a cache in cpu_init_r. We set this on the 85xx boards that have support for NAND, SPI, or SDHC/MMC boot support as they use a secondary cache in SRAM mode and need the env_addr pointer relocated since we change from SRAM to normal cache mode in cpu_init_r. Also removed CONFIG_SYS_SPL as its not used anywhere. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
| * | | | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2010-11-30-1/+0
| |\ \ \ \ \ | | |/ / / /
| | * | | | Merge branch 'master' of git://git.denx.de/u-boot-shWolfgang Denk2010-11-30-1/+0
| | |\ \ \ \
| | | * | | | sh: r7780mp: Remove CONFIG_DRIVER_NE2000 from configNobuhiro Iwamatsu2010-11-30-1/+0
| | | |/ / / | | | | | | | | | | | | | | | | | | Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
| * | | | | Merge branch 'master' of /home/wd/git/u-boot/custodiansWolfgang Denk2010-11-30-2/+2
| |\ \ \ \ \ | | |/ / / /
| | * | | | mpc83xx: Fix for MPC8360 ATM Quad OC3 External PhysStefan Popa2010-11-30-2/+2
| | |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changed the CS4 and CS5 addresses on Local Bus for matching the PMC0 and PMC1 addresses. Signed-off-by: Stefan Popa <Stefan.Popa@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
| * | | | Remove duplicate #defines in atngw100.h and mimc200.hSemih Hazar2010-11-28-4/+0
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Two configuration include files had duplicate CONFIG_DOS_PARTITION definitions with the same value. This patch does not effect anything, just trims unnecessary text. Signed-off-by: Semih Hazar <semih.hazar@indefia.com>
* | | | mpc52xx: add support for tqm52xx based board charonHeiko Schocher2010-12-16-9/+97
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - serial console in PSC1 - 128MiB DRAM - 32MiB Flash - FEC Ethernet - 2 I2C busses - FPGA on CS3 - IDE - VGA SMI501 Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Wolfgang Denk <wd@denx.de>
* | | | OMAP3: SPI driverDirk Behme2010-12-11-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | CC: Ruslan N. Araslanov <byaaka@yandex.ru> Signed-off-by: Ruslan Araslanov <ruslan.araslanov@vitecmm.com> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | | | ARMV7: OMAP4: twl6030 add battery charging supportBalaji T K2010-12-11-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add battery charging support twl6030 driver. Add support for battery voltage and current measurements. Add command to get battery status and start/stop battery charging from USB. Signed-off-by: Balaji T K <balajitk@ti.com> Tested-by: Steve Sakoman <steve.sakoman@linaro.org> Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
* | | | Move LDSCRIPT definitions to board config files.Wolfgang Denk2010-12-09-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent cleanup actions resulted in a number of config.mk files that contained only LDSCRIPT definitions. Move these into th respective board config files and remove the now empty config.mk files. Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com> Cc: Detlev Zundel <dzu@denx.de> Cc: Heiko Schocher <hs@denx.de> Cc: Andre Schwarz <andre.schwarz@matrix-vision.de> Cc: Peter De Schrijver <p2@mind.be> Acked-by: Detlev Zundel < dzu@denx.de> Acked-by: Andre Schwarz <andre.schwarz@matrix-vision.de> Acked-by: Heiko Schocher<hs@denx.de> Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
generated by cgit v1.1 at 2024-11-07 10:29:45 +0000