summaryrefslogtreecommitdiff
path: root/include/configs
Commit message (Collapse)AuthorAgeLines
* Add driver for S-ATA-controller on Intel processors with Southmushtaq khan2007-05-15-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Bridge, ICH-5, ICH-6 and ICH-7. Implementation: 1. Code is divided in to two files. All functions, which are controller specific are kept in "drivers/ata_piix.c" file and functions, which are not controller specific, are kept in "common/cmd_sata.c" file. 2. Reading and Writing from the S-ATA drive is done using PIO method. 3. Driver can be configured for 48-bit addressing by defining macro CONFIG_LBA48, if this macro is not defined driver uses the 28-bit addressing. 4. S-ATA read function is hooked to the File system, commands like ext2ls and ext2load file can be used. This has been tested. 5. U-Boot command "SATA_init" is added, which initializes the S-ATA controller and identifies the S-ATA drives connected to it. 6. U-Boot command "sata" is added, which is used to read/write, print partition table and get info about the drives present. This I have implemented in same way as "ide" command is implemented in U-Boot. 7. This driver is for S-ATA in native mode. 8. This driver does not support the Native command queuing and Hot-plugging. Signed-off-by: Mushtaq Khan <mushtaq_k@procsys.com>
* Fix for compile of JSE targetStephen Williams2007-05-15-0/+1
| | | | | | | | The attached patch fixes the compile of the JSE board in the denx git as of 14 may 2007. It is an extremely simple patch, it just adds the missing define of CFG_SYSTEMACE_WIDTH. Fix to compile JSE against 20070514 git of u-boot
* Merge with /home/wd/git/u-boot/masterWolfgang Denk2007-05-15-20/+96
|\
| * Merge with /home/tur/git/u-boot#motionproWolfgang Denk2007-05-15-20/+96
| |\
| | * [Motion-PRO] Add MTD and JFFS2 support, also add default partitionPiotr Kruszynski2007-05-10-0/+9
| | | | | | | | | | | | definition.
| | * [Motion-PRO] Add support for I2C, EEPROM and RTC.Piotr Kruszynski2007-05-08-1/+29
| | |
| | * [Motion-PRO] Add ATA support. Add CF-booting commands to the defaultBartlomiej Sieka2007-05-08-2/+23
| | | | | | | | | | | | environment.
| | * [Motion-PRO] Change IPB clock frequency from 50MHz to 100MHz. ThisBartlomiej Sieka2007-05-08-0/+7
| | | | | | | | | | | | eliminates networking problems in Linux (timeouts).
| | * [Motion-PRO] Enable Flat Device Tree support and modify default environmentBartlomiej Sieka2007-05-08-19/+30
| | | | | | | | | | | | to allow booting of FDT-expecting kernels.
* | | Get rid of duplicated file (see include/configs/sbc8560.h instead)Wolfgang Denk2007-05-07-410/+0
|/ / | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Coding stylke cleanup; update CHANGELOG.Wolfgang Denk2007-05-05-1/+1
| | | | | | | | Signed-off-by: Wolfgang Denk <wd@denx.de>
* | Merge with /home/wd/git/u-boot/custodian/u-boot-ppc4xxWolfgang Denk2007-05-05-62/+23
|\ \
| * \ Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-05-05-0/+465
| |\ \
| * | | ppc4xx: Detect if the sysclk on Sequoia is 33 or 33.333 MHzJeffrey Mann2007-05-05-1/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AMCC Secquoia board has been changed in a new revision from using a 33.000 MHz clock to a 33.333 MHz system clock. A bit in the CPLD indicates the difference. This patch reads that bit and uses the correct clock speed for the board. This code is backward compatable will all prior boards. All prior boards will be read as 33.000. Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> Signed-off-by: Stefan Roese <sr@denx.de>
| * | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-04-29-32/+462
| |\ \ \
| * | | | ppc4xx: Bamboo: Use current NAND driver and *not* the legacy driverStefan Roese2007-04-29-60/+7
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
| * | | | ppc4xx: Fix chip select timing for SysACE access on AMCC KatmaiStefan Roese2007-04-19-1/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Previous versions used full wait states for the chip select #1 which is connected to the Xilinix SystemACE controller on the AMCC Katmai evaluation board. This leads to really slow access and therefore low performance. This patch now sets up the chip select a lot faster resulting in much better read/write performance of the Linux driver. Signed-off-by: Stefan Roese <sr@denx.de>
* | | | | Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xxWolfgang Denk2007-05-05-17/+1124
|\ \ \ \ \
| * | | | | Cleaned up some 85xx PCI bugsAndy Fleming2007-05-02-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Cleaned up the CDS PCI Config Tables and added NULL entries to the end * Fixed PCIe LAWBAR assignemt to use the cpu-relative address * Fixed 85xx PCI code to assign powar region sizes based on the config values (rather than hard-coding them) * Fixed the 8548 CDS PCI2 IO to once again have 0 as the base address Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | | Add support for the 8568 MDS boardAndy Fleming2007-05-02-0/+505
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This included some changes to common files: * Add 8568 processor SVR to various places * Add support for setting the qe bus-frequency value in the dts * Add the 8568MDS target to the Makefile Signed-off-by: Andy Fleming <afleming@freescale.com>
| * | | | | Add MPC8544DS main configuration file.Jon Loeliger2007-04-23-0/+591
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com> Signed-off-by: Jon Loeliger <jdl@freescale.com>
| * | | | | Fix PCI I/O space mapping on Freescale MPC85x0ADSSergei Shtylyov2007-04-23-9/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The PCI I/O space mapping for Freescale MPC8540ADS board was broken by commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc which failed to update the #define's describing the local address window used for the PCI I/O space accesses -- fix this and carry over the necessary changes into the MPC8560ADS code since the PCI I/O space mapping was also broken for this board (by the earlier commit 087454609e47295443af793a282cddcd91a5f49c). Add the comments clarifying how the PCI I/O space must be mapped to all the MPC85xx board config. headers. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> board/mpc8540ads/init.S | 4 ++-- board/mpc8560ads/init.S | 4 ++-- include/configs/MPC8540ADS.h | 5 ++--- include/configs/MPC8541CDS.h | 2 +- include/configs/MPC8548CDS.h | 2 +- include/configs/MPC8560ADS.h | 8 ++++---- 6 files changed, 12 insertions(+), 13 deletions(-)
| * | | | | u-boot: Disables MPC8548CDS 2T_TIMING for DDR by defaultebony.zhu@freescale.com2007-04-23-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch disables MPC8548CDS 2T_TIMING for DDR by default. Signed-off-by:Ebony Zhu <ebony.zhu@freescale.com>
| * | | | | u-boot: Enable PCI function and add PEX & rapidio memory map on MPC8548CDS boardZang Roy-r619112007-04-23-8/+20
| | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | Enable PCI function and add PEX & rapidio memory map on MPC8548CDS board. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
* | | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-05-05-0/+465
|\ \ \ \ \ | | |_|/ / | |/| | |
| * | | | Update board configuration for STX GP3SSA board:Wolfgang Denk2007-05-03-20/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Enable hush shell, environment in flash rather in EEPROM, more user-friendly default environment, etc. The simple EEPROM environment can be selected easily in the board config file. Signed-off-by: Wolfgang Denk <wd@denx.de>
| * | | | Add support for STX GP3SSA (stxssa) BoardDan Malek2007-05-03-0/+418
| |/ / / | | | | | | | | | | | | Signed-off-by Dan Malek, <dan@embeddedalley.com>
* | | | Merge with git://www.denx.de/git/u-boot.gitStefan Roese2007-04-23-12/+2
|\ \ \ \ | |/ / /
| * | | Merge with /home/dzu/src/git/u-bootWolfgang Denk2007-04-20-11/+1
| |\ \ \
| | * | | Fix breakage of NC650 board with respect to nand support.Detlev Zundel2007-04-20-11/+1
| | | | | | | | | | | | | | | | | | | | Signed-off-by: Detlev Zundel <dzu@denx.de>
| * | | | [RFC PATCH] icecube/lite5200b: fix OF_TBCLK (timebase-frequency) calculationDomen Puncer2007-04-20-1/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | G2 core reference manual says decrementer and time base are decreasing/increasing once every 4 bus clock cycles. Lets fix it, so time in Linux won't run twice as fast Signed-off-by: Domen Puncer <domen.puncer@telargo.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>
* | | | Remove BOARDLIBS usage completelyStefan Roese2007-04-23-2/+0
|/ / / | | | | | | | | | Signed-off-by: Stefan Roese <sr@denx.de>
* | | Merge with /home/wd/git/u-boot/custodian/u-boot-74xx-7xxWolfgang Denk2007-04-18-0/+411
|\ \ \
| * \ \ Merge with /home/git/u-bootWolfgang Denk2007-03-08-20/+13
| |\ \ \
| * \ \ \ Merge with /home/git/u-bootWolfgang Denk2007-03-08-1/+3
| |\ \ \ \
| * | | | | Some code cleanup.Wolfgang Denk2007-03-04-1/+1
| | | | | |
| * | | | | Merge with http://opensource.freescale.com/pub/scm/u-boot-7448hpc2.gitWolfgang Denk2007-03-04-0/+411
| |\ \ \ \ \
| | * \ \ \ \ Merge branch 'master' into hpc2roy zang2007-02-28-32/+753
| | |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/Makefile Fix the merge conflict in file drivers/Makefile Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| | * \ \ \ \ \ Merge branch 'master' into hpc2roy zang2007-02-12-378/+424
| | |\ \ \ \ \ \
| | * \ \ \ \ \ \ Merge branch 'master' into hpc2roy zang2007-01-30-2/+176
| | |\ \ \ \ \ \ \
| | * | | | | | | | use CFG_WRITE_SWAPPED_DATA define instead of define CFG_FLASH_CFI_SWAProy zang2007-01-22-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support mpc7448hpc2 board.
| | * | | | | | | | Merge branch 'master' into hpc2roy zang2007-01-22-36/+1472
| | |\ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Conflicts: drivers/cfi_flash.c The patch by Heiko Schocher <hs@pollux.denx.de> on Jan, 19, 2007 fixes cfi_driver bug for mpc7448hpc2 board. The default cfi_driver can support mpc7448hpc2 board.
| | * \ \ \ \ \ \ \ \ Merge branch 'master' into hpc2roy zang2007-01-04-1/+954
| | |\ \ \ \ \ \ \ \ \
| | * | | | | | | | | | Remove the static MAC address, ip address, server ip, netmask androy zang2006-12-04-11/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | gateway ip for network setting. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| | * | | | | | | | | | Remove the duplicate memory test code for mpc744ihpc2 board.roy zang2006-12-04-22/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If a memory test is needed, please use the functions in post/memory.c or memtest command. Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| | * | | | | | | | | | Fix the exception occuring in RAM table search issue.roy zang2006-12-01-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original search_one_table() function code can only processes the search for the exception occurring in FLASH/ROM, because the exception and fixup table usually locate in FLASH. If the exception address is also in FLASH, it will be OK. If the exception occurs in RAM, after the u-boot relocation, a relocation offset should be added. clean up the code in cpu/74xx_7xx/cpu.c Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
| | * | | | | | | | | | Fix the confilcts when merging 'master' into hpc2.roy zang2006-12-01-20/+1980
| | |\ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The conflicts due to a new mpc7448 p3m7448 board is in the main tree. Merge branch 'master' into hpc2 Conflicts: MAKEALL cpu/74xx_7xx/cpu.c cpu/74xx_7xx/cpu_init.c cpu/74xx_7xx/speed.c
| | * | | | | | | | | | | Clean up the code according to codestyle:roy zang2006-12-01-145/+145
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | (1) remove some C++ comments. (2) remove trailing white space. (3) remove trailing empty line. (4) Indentation by table. (5) remove {} in one line condition. (6) add space before '(' in function call. Remove some weird printf () output. Add necessary comments. Modified Makefile to support building in a separate directory.
| | * | | | | | | | | | | Solve the copyright conflicts when merging 'master' into hpc2.roy zang2006-11-29-43/+368
| | |\ \ \ \ \ \ \ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge branch 'master' into hpc2 Conflicts: drivers/cfi_flash.c
| | * \ \ \ \ \ \ \ \ \ \ \ Merge branch 'master' into hpc2roy zang2006-11-03-107/+82
| | |\ \ \ \ \ \ \ \ \ \ \ \
generated by cgit v1.1 at 2024-07-15 20:29:14 +0000